Role upload from portal.

hi,
I am attempting to upload a sampling of R/3 ECC 6.0 roles into the portal (EP7.0). I have the system connection defined and testing successfully. I unfortunately can not execute the upload function. After defining the selections that I wish to upload, in this case a role, I receive the red exclamation mark followed by
"Could not perform action. Check the role migration log for additional information"
Please let me know how to upload sap roles from portal.
thanks in advance.
Mahee.
Edited by: MaheeshReddY on Nov 6, 2010 12:10 PM

Hi,
Make sure Portal System Landscape has correct valud in System Property tab (System Property,Connector).
Below SAP help gives you all the informaton on role upload (Pre-requisites/the process flow).
http://help.sap.com/saphelp_nw70/helpdata/en/43/0caa807dad6e72e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/76/405640a2f78437e10000000a155106/frameset.htm
Regards
Nagaraju

Similar Messages

What are the backend configuration required for photo upload from portal?

Hi all,
When i am trying to upload the photo from portal it is giving error
can not archive the photo
we are using portal 7 and ecc 6.0
I want to know
What are the backend configuration required for photo upload from portal
Can any but help me out
Rajendra

Hi,
Are you using the standard iview. If that's the case you need to configure in the backend. Meaning you need to store the photo in the Org management(HR) which the HR functional guys will do. You just need to add the iview to your role.
Let me know if you require further informationn.
Award points if helpful.
Cheers,
sathya

Iview object properties after role uploading from ABAP again

Hi,
Now it seems that the properties of the iviews that were uploaded from ABAP stack are overwrittened when this role is uploaded again from ABAP stacks.
I wuold like to set the property of the iView as "start with another window". but they are now overwritten after role uploading.
if someone know good idea, please advise.
Kind regards,
Masaaki

Hi Tilak,
I think you query is not be not answered.
When you upload the role (click on start upload )you need to wait until the status is Finished.The role that you have uploaded can be seen in portal content - content Administration-> portal content-> migrated content-> roles-> u201Csystem nameu201D .
If you are not able to see mean your role is not uploaded correctly.
And my suggestion is first check the service com.sap.portal.pcd.rolemigration"
Hope this resolves your problem.
Cheers!!
VEnk@

Schedule Role Upload in portal

Hi expert,
Just receive a requirment to code an WD application in orde to trigger the Role Upload functionality in portal.
Anyone has some idea's how to do this ? Is this possible ?
An WD calling a HTMLB application? how ? any code snippets are welcome.
you help will certain has point back.
Ben.J.

closed

BI Role upload to Portals got messy

I posted same question on the PCD but got no response so I am reposting this here. we have a Role called Power User and inside there are 10 different folders for each plant and in turn each of these folders have some queries embedded in them. We uploaded this Role into Portals (Netweaver 2004s) and after that our portals page got messy, now it shows 11 tabs, one for the Main Role Power user and then followed by the 10 sub folders. We expected that there would only be one folder visible and then when we double click on it it should show all those sub folders in one window on the left hadn pane (Detailed navigation).
One more thing we notice is that thought the role got uploaded all these tabs are blank when I click on any of them...
Can someone guide what we are missing here....

This is what I DId:
   1. System Admin -? Role Upload -> SAP ROle Upload
    Selected: Upload user mapping
    Selected: Upload Included Services
    Selected: Selecte First Level nag as Entry Point
Overwrite Existing Role Selected..
Actually I have not paid attention before but I have got some error messages that I missed earlier during Rle Upload:
Severity: Red
Check system configuration for alias: BFSBID100, system: pcd:portal_content/Systemlandscape/bfusa.com.isbid1_db - failed to retrieve logical system idSEVERE: getObject(portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/BIDCLNT100/BSA_BW_CONTAINER_CONSUMER_FA), entry '[RoleMenu, 00000008, , , 00000003, BwReport, SAP_BW_QUERY, BFSBID100_BSA_BW_CONTAINER_CONSUMER_FA_00000008, , BFSBID100, 00000010, 00000002]'.
Severity: Yellow:
Menu definition missing for entry 00000008 in role portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/BIDCLNT100/BSA_BW_CONTAINER_CONSUMER_FA: locale E - text CDS Tonnage Report MC01
What does these messages infer ?

Error in Shopping Cart Upload from Portal Using Excel

Dear All ,
I am facing problem when i try to upload excel file for creating Shopping cart from Portal . For doing this i have created a transaction from SRM r/3 and using Transaction i view i published the tcode on portal . But when i try to upload a excel file using the transaction i am getting a Exception UPLOAD_OLE . For uploading excel we copied the Fm ALSM_EXCEL_TO_INTERNAL_TABLE . Its working fine in SRM R/3 environment.but facing issue on portal . Please help us out on this .
Regards
Shankar

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

BW Roles upload into Portal

Hi,
Can any one let me know the step by step procedure for importing BW roles into my Portal. I went through help.sap.com but could not accompolish much.

Hi,
which BW/EP Releases ?
BW 3.5 / EP 6.0:
Create a BW-Iview and assign a BW-Webtemplate to it, which contains the rolemenu-item.
Kind Regards,
Alican Polat

BI Role upload from BI-JAVA/Portal creates wrong url in Iview property

Hi Everyobody
here is a tricky one. Our BI DEV is a Systemcopy from the PRD.
When we try to upload Roles from the BI-JAVA/Portal it generates the Iviews Worksets correctly.
The only Problem is that the Iviews property "URL Template" is the one from the Production.
On our DEV System:
I checked the bsp from icf with the correct url
I checked the HTTP URLLOC entry
I checked the RSPOR_T_SETUP
I even checkd the Functionmodule RSBB_URL_PREFIX_GET
I checked the SAP_BW alias /WAS property
All have the correct URL.
Does anyone know where else the wrong url could be located?
Thanks for your help
Murat

it suddenly worked

Role upload to portal

Hello everyone,
Can anyone let me know how to upload roles from a BW or R/3 system to portal??
Your help will be appreciated,
Thanks,
regards,
Payal

Hi,
I just wanted to clarify one issue. This functionality is available also in EP60 SP2 since patch4.
Best regards,
Aviad
https://sapneth2.wdf.sap.corp/~sapdownload/011000358700002176712004E/role_upload_v3.pdf

Error while Role Upload

Hello,
We have Enterprise Portal connected to the Backend SRM System and while trying to do a Role Upload from SRM to Portal ,I get the following error as below:
com.sap.portal.pcd.rolemigration.RoleMigrationConnectionException: Connection Failed: Nested Exception. Physical connection was not initialized. - message at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(System,en,userid,TWPN_GET_URL,SERVICE_TABLE,{ENABLE_LOGGING= , ROLENAME=<Rolename>OBJECT_ID=00000102}): Connection not available for system ''Connection Failed: Nested Exception. Physical connection was not initialized. at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:114) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Original exception: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Physical connection was not initialized. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:133) at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:371) at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:262) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorConnectionFactory.getConnectionEx(SAPCFConnectorConnectionFactory.java:156) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:295) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:256) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:446) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:84) at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:79) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Failed in creating the JCO Connection. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:456) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.establishInitialConnection(SAPCFConnectorManagedConnection.java:204) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.init(SAPCFConnectorManagedConnection.java:183) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:129) ... 15 more Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518) at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086) at com.sap.mw.jco.JCO$Client.connect(JCO.java:3296) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:429) ... 18 more
Any help would be highly Appreciated.
Thanks

Hi,
Please check the SRM system object connection in the SAP Portal. GO to system administration > system configuration > system landscape and search for SRM system object and test the connection. If connection test successful then try to upload the roles.
Hope it will helps
Best Regards
Arun Jaiswal

Role Upload - Rename

Hello,
I have uploaded a role 'FI_ACCOUNTANT' from R3 into EP6 SP9. I have changed the name and description of this role in the editor to 'FI' and when I assign this role to my administrator/super admin userID, the modified name appears in the TLN. All very good.
However when I assign this role to a non-administrator userID, the TLN contains the original SAP role name!
I've played around with permissions but I don't think that's the cause.
Does anyone know whats going on here?
Thanks
Mr.T

Hi Tahir,
i am jagadish, i am new to portal implementation, i request to u could u please send Steps of Role uploading from back end system to portal.
this is my personal id : [email protected]
Regards,
Jagadish Babu Kanikanti.

ERM - MASS ROLE UPLOAD

Hi All,
when using the Mass role upload from SAP backend systems, i expect that all roles will be uploaded to the final stage in the role methodology inthe ERM and that they will be already generated.
After all, those roles already exists in the systems.
well, i see that this is not the case and i have to go through the different stages with every role.
is this indeed the system behavior or did we do somthing wrong ?
thanks

Hi
We did as you suggested but configured the approval stage in the methodology since the role is already approved and is in ECC PROD.
Now we encountered a situation where we need to update the role in ERM as part of continuos maintainance (after upload) but we don't have the authorization option to enter and change it but only the "save" and "change history" push buttons.
We changed bach the methodology to the relevant one with all the stages but still we can't maintain the uploaded role. the change in the methodology did not effect the role already uploaded.
Do you have any suggestions regarding how we can fix this issue?
Thank you

Hide automatic created folder from role upload

Hi,
when I make a role upload to the portal, a top folder with the same name as the role is automatically created. Is it possible to disable this feature or hide the folder afterwards?
I have created my own folder structure in the portal, which defines the first two levels of navigation, and then made a delta link from this structure to the uploaded role. The content of the uploaded role is automatically put in a folder on third level instead of directly under the second level folder. This way the user has to click first on the role and then on the folder to get to the content. This is not very user friendly.
Hope someone can help.
Regards Morten

Have you tried changing the 'Entry Point' property within the uploaded roles ?
When you do a role upload, you have the chance to automatically create the roles as worksets (rather than portal roles). Have you tried doing this? I think you get fewer levels (from memory)
Also, is your composite (backend) role design already in place and finished? It is worth trying to consider the portal when doing the backend composite role design in order to prevent issues like this.
Award points if this helps

Upload Excel File from Portal (R/3 working fine)

Hi Experts!!
We have a report in which we are uploading an excel file from presentation server into an itab. When F4 clicked for file path, browser will open for choosing the path. Now, we have created an iView in Portal for this t-code. However, F4 is not working from Portal, rather giving an error 'Please wait. You will be forwarded automatically. This page had to be included for technical reasons.'.
We need to upload excel file even from Portal too. Can somebody please give me some inputs or suggestions?

Hi Jigar,
Now I am able to get into SAP screen. However it's not opening the t-code that I mentioned. I gave some Z t-code ZTEST. Once I check the iView, it is showing SAP screen with the below things:
Service Type:
Service ID:
TCode: ZTEST
Object Type:
Key:
Field 1:
Val. 1:
Field 2:
Val.2:
Field 3:
Val 3:
And at the bottom it's giivng a warning message:
Object type or object does not exist
Message no. 1W001
In iView properties I can see Object Type as com.sapportals.portal.iview. Is this the same Object Type that the message is talkign about? Can you please help me out?

Can the role info be passed from portal to ABAP web dynpro application

Hi,
We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
Thanks,
Pooja

Hi,
you can try to add the expression
role=<IView.PCDUnit>
as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
the value will be the PCD path of the role - e.g:
portal_content/myFolder/roles/myRole

Role upload from portal.

Similar Messages

Maybe you are looking for