Rolemenu not found in BEx BI Web Application Designer - Urgent
Hi,
I am unable to find the Rolemenu in BI Web application designer which was there in BW 3.5.
Kindly let me know where can i find this in BI.
Regards,
Arvind M
Hi Arvind,
In BW 7.0 Role Menu Web item will be replaced by the role-based display of BI content in SAP NetWeaver Portal. In addition to the pure Web-based display of BI content in roles, additional functions result from this, especially in regard to display and editing of any content in one environment.
Reward if it helps,
Ajay
Similar Messages
-
Variable in Web application Designer (urgent)
HI Experts,
I have a requirement where I have to print the report in PDF format where the Selected Variable will appear in the Left hand Corner of the final report output, Report name will come in the Middle, and company's logo will come in the right hand corner.
Now company's Logo and report name i can display in the report but Variable screen neither can I Add Push Button to Call Variable Screen I got a document but its not clear in it.
Please provide me the steps and please explain the procedure to add variable screen or to add a push button to Call Variable Screen.
The document I followed is "How to Enhance SAP BEx Web Analyzer (0ANALYSIS_PATTERN)"
I'm a beginner in WAD.
Points will be awarded for proper guidance.
Edited by: James on Jul 17, 2008 7:55 AMHi,
1. Check if your variable is input-ready (if it's not - it shouldn't appear on variable screen). If yes - pls.follow
2. Try to set parameter Reset variable values - On (WAD-> your Template --> Web template parameters --> Behavior)
3. General info on WAD can be found here http://help.sap.com/saphelp_nw70/helpdata/EN/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps -
Web application designer--Urgent
Hi Experts,
I've a scenario that i've developed web template and saved in library. Now If a particular user want to see those reports, how do I generate link and give them to check the report in portal. Please help me.
Thanks in advance...
AmarnathHi Amaranath,
U have already created a web template. run the webtemplate it will generate a Url in the internet explorer page. There are two ways.
U copy the Url which is already listed in the Internet Explorer create a url iview in the Enterprise portal and give access to the portal user.
Otherwise u can save this url as book mark also and create a url iview on the EP and give access to the iview for the relevant user.
Arrange the iview in a workset and assign the relevant workset to a user role then only the user can view the report in the EP.
More over the EP should have connectivity to the SAP BW system as well.
Assign points if u found helpful.
Message was edited by:
Shahid Syed
Message was edited by:
Shahid Syed -
Installation of web application Designer-urgent
Can users access only WAD without any SAP or Bex Installation.
I mean can we install WAD only without installing BEX or SAP.
Please suggestHi Pallavi,
WAD is a part of the BEx suite. So you need to install BEx suite and then only can you get access to the WAD.
Hope this helps... -
To use Web Application Designer release 2004s do we need to have portals???
Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advanceYOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP.. -
Starting Web Application Designer
Is it possible to start the BEX Web Application Designer from GUI? I know you can start BEx Query Designer by running RRMX. Is there a similar command in BW GUI that also starts the Web Application Designer?
Thanks.Hi,
There is a no tx code to open WAD.
You have open via srart ->Bex Explorer->Web application Designer.
Thanks,
Michael -
Difference Between Web application design and Report Designer
Hi,
I have searched in the forum as well i Google it but still i am not clear the difference between Web application Designer and report Designer , why especially we go for WAD ? and what is not possible in Report designer which we can do in WAD Please some one explain me that would be great helpful to me. i am having lot of confusion in this issue.
thanks,
GalHi,
The Report designer is completely for formating of your query and results. Here you have the flexibility to design your query(one/more) results in your own way.
The WAD is for displaying various web items at one short for a single/multiple query. And here you have the flexibility to do the XML coding on the web items, but not as much you have the flexibility on Report Designer.
But, Report designer will have more performance issues than WAD. So, generally it helps when you need extreme formating of your reports.
Hope this clears your doubt.
Regards,
Srinivas. -
Bex Web Application Designer launched from desktop NOT SSO (single sign-on)
NW 2004s
BI 7.0
The SSO from the Portal to BI/BW is working correctly, The SSO from BI/BW to the POrtal is working correctly.
The problem is from the desktop, launching Bex Web Application DEsigner, it prompts to Logon to the BI system, then when you execute the selection it prompts you to log on to the Portal. I would expect the Portal logon to be SSO. Is there an SSO option for the Bex WAD I need ?
Is there a Bex tool or desktop configuration that I need to implement?
Thanks in advance for any help
SarahHello Sarah,
Please refer this SSO SAP Pages
http://help.sap.com/saphelp_nw04s/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
For Portals
http://help.sap.com/saphelp_nw04s/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/content.htm
You can also refer this forum
/thread/342517 [original link is broken]
Hope it helps
Thanks
Chandran
Edited by: Chandran Ganesan on Feb 6, 2008 8:26 PM -
Calling a webservice from within Bex Web Application Designer
Hi
I have a web-template built with BEx web application designer which also contains textboxes. This text should be stored by calling a webservice (standard BI-documents are not an option).
Can anyone tell me how I could call a webservice from within the BEx web template to store the text contained in the textbox? The webservice-call should include some of the filter-varialbes of the web application.
Is this only possible by the use of a JavaScript WebItem? If so - does anyone have an example of such a JavaScript.
Thanks a lot in advance.
Kind regards.
ChristophThanks for your response. The BSP page would work out fine if I only needed to save the data.
But the next time I call the webtemplate, the textarea should be filled by another webservice call with the stored text (so the text can be modified und saved again). This will not be possible by calling a BSP page.
Do yoiu have any suggestions how to integrate the text (return value from the webservice call) into the textbox in the webtemplate?
Kind regards.
Christoph -
Print PDF file with the lay out created in the BEx web application designer
Got the following questions (problems) when print a web report created in BEx Web Application Designer to a PDF file:
1. The tile (which has a company logo and report name in it) was not printed, is it possible to print a title (with company logo) on each page of the PDF file?
2. Want print the filters that have value specified on the PDF file, is it possible to do this?
Any help is appreciated, thanks.Hi Simon,
you can achieve this requirement i.e. using this way of implementation:
1. Create a new template which contains the required fields (company logo etc) and set the visibility of the top container to "hidden". Add a empty data provider to this template and add the filter values (variable names) you want to display on the PDF. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
2. Open your original template and include the template you created in step 1 (Advanced: Web Templates). Choose the appropriate location (above/below the analysis item.
3. Check the settings of your export command: do not set a special web item to be printed.
If you export the template within web the second template should be printed correctly.
Brgds,
Marcel -
Bex Web Application Designer issue: portal communication error
hi experts,
I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
The Requested operation could not be performed due to portal communication error.
its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
when i double click the below error details given.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
please give solutions to resolve the issue.
regards
vadlamudihi shambhu,
thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
regards
vadlamudi -
RSBOLAP 018 Java system error in BEx Web Application Designer
Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
OscarHello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB -
Bex Web Application designer 3.x windows 7
Good Morning,
Im trying to use Bex Web Application Designer SAP BW 3.x doenst working at windows 7.
its ask one version above ie 5.
Im using ie 8, i cant install the ie 7.
there is anyway i solve this problem?
i patched of last support package, even it not working
thank u
regards,
AmitDear Amit,
unfortunately I get the same error here when I try to run the WAD 3.5 under Windows 7. I only can hope that there will be a work around, as SAP will officially support Win7 only with SAPGui 7.20 which will be released in Q1 next year. I did not get any information that BW 3.5 will still be included in Gui 7.20, but probably someone who is reading the forum from SAP can provide an answer...
Another strange thing which I discovered in Win7 is, that when I execute a query and the variable screen is displayed, most of my variable descriptions are missing. When I toggle back and forth some windows everything appears correctly. So I guess that (hopefully) the display device driver needs only another update...
Regards,
Andreas -
XCelsius + BICS + Publish to EP + BEx Web Application Designer
Dear Friends,
Any one have idea about how we can publish an XCelsius Dashboard (with BICS connectivity) to the SAP Enterprise portal using Bex Web Application Designer?
I tried to publish the dashboard using the iView, by following the below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinNetWeaverEnterprisePortal
Since it can only support individual report, I can not use this option in my client.
Appreciate your help to provide me the information how we can publish the dashboard using Bex Web Application Designer.
Thanks & Regards,
Ajish GeorgeHi,
Did creating the iView using the instructions in the link work for one Xcelsius report? Can you explain what you requirement is or expand on your comment "Since it can only support individual report, I can not use this option in my client.". One iView can only launch one object. If you have multiple BW connected XC files to launch I think that you will have to create multiple iViews with the "DASHBOARD=" each XC file value in each iViews BEx Web iView query string parameter setting.
If you only want one link off of your Portal then you could create a BW 7.0 Web application where you could use objects like buttons to launch each individual URL string for the seperate dashboards. The challenge with this would be that your URLs would be static and if you are using a regular BW landscape, DEV / QAS / PRD, then you would need to employ logic find and update the system part of the URL. I am not sure how this would be done, but it would probably require JavaScript. If you do report development in your PRD system this would not be an issue.
From a support perspective I would suggest using a container iView to group your XC reports together and then create a seperate iView for each XC report. This eliminates dealing with the system identifier as the Portal enviroment manages this as the objects are transported through the systems. A container iView with the action iViews in it would look like a menu structure on your Portal.
Rgds,
Mel -
I get 'SAP BEx web Application designer has stopped workin' when click WAD
Hi,
When I click on WAD(Web Application Designer option from Business Explorer menu),
I get "SAP BEx web Application designer has stopped working".
I am running VISTA.
Any hints on how to deal with this problem?
ThanksHi,
I uninstalled and installed again the GUI and Bex Explorer
I installed again SetUpAll.exe and selected:
--SAP GUI for Windows 7.10 (Compilations3)
--BW 3.50 Add-On for SAP GUI 7.10
--Business Explorer
On completion, I had two options for WAD:
--Web Application Designer (SAP BW 3.x)
--Web Application Designer
When I point my mouse on "Web Application Designer " for selection, there is a message that
"Business Explorer Web Application Designer - Can only be used in SAP NetWeaver 7.1"
and when I go ahead to click on it, I get the error message I reported in my initial post
If I select Web Application Designer (SAP BW 3.x), it takes me in alright but the view is a bit different, in that in the New template of the Web Application, on the right pane, I do not see the icon for DataProvider which used to be there when I used to work in "Web Application Designer" instead of "Web Application Designer (SAP BW 3.x)"
Any hints?
Thanks
Maybe you are looking for
-
How do I change the ip address on my MacBook
How do I change the ip address on my MacBook pro
-
Substitution Profile is not working correctly
I have a scenario where a user has to set up substitution to process certain workitems but not all workitems so we have created a substitution profile but it does not seem to be working for us. We have configured through IMG the following Task class
-
Populate document header text in SES by bapi BAPI_ENTRYSHEET_CREATE
Hi, I am using BAPI BAPI_ENTRYSHEET_CREATE to create a service entry sheet. But I am not able to populate the document header text (bktxt) in acceptance tab in service entry sheet header in ML81N. Can anybody help me what I need to pass to this BAPI
-
Link box do not have url parameters button
I start learn Dreamweaver with this lessons How to Build a Content Management System Using Dreamweaver - YouTube, but have a problem. I do not have in the link box the parameters button for URL. Is it some extension?
-
Firefox crashes when attempting to print to a Canon ImageClass D680 all-in-one unit.
I can print just fine to the Canon ImageClass D680 all-in-one unit from an Internet Explorer browser. Firefox crashes every time. The printer is connected to a Dell Optiplex 755 SFF via USB A-B std printer cable, on a WXP O.S. Using the latest releas