Roles and Object queries tab not visible in MBO attribute properties

Hi,
We have installed the SUP Personal developer edition 2.0 on a windows 2008 server. I am trying to create a sample application for getting the list of sales orders by using the SAP BAPI. Once I have the MBO in place, I see that I cannot view the 'Roles' and 'Object Queries' tabs in the 'Attributes' section of the MBO properties.
Does anyone know why this happens? Is it due to configuration issues? Do help me out as we're trying to get a demo working.
Thanks & Regards,
Vaishnavi

Hi Vaishnavi,
Check whether you have selected "Advanced" mode . You should be able to see it.
Regards,
Viju

Similar Messages

  • Properties window and Object Browser window not visible anywhere

    Although "Properties"  and "Object Browser" are ticked in the View menu, the windows do not appear anywhere on the screen (yes I have looked everywhere).  The "Components" window appears as normal.  It does not matter what Xcelsisus file I am working in, as the problem is the same even when I first launch Xcelsius.  I was running Xcelsius Engage 2008 with Office 2003 and did not have this problem.  I recently upgraded to Office 2007 and now I have this problem.  I run the same software on my notebook without any problem.  Very frustrating.  Any ideas on how to fix the problem?   Thanks JR

    Hi JR,
    This should be something simple.  Please use the shortcut to get focus to :Object Browser" by pressing Ctrl+4,  If you are unable to spot the object brower, it must be minimised eighter of the corner of Xcelsius window.
    Use "Restore Dwon" button which will be at the right top corner (before Close Button) so that your Xcelsius window become smaller size. Try to find the border of the working window and make it smaller in all 4 sides using mouse.  You will find the Object Browser, Property window somewhere.
    Please revert if this does not helps you.
    With best wishes
    BaaRaa.

  • Crystal reports not rendering properly and toolbar is also not visible in firefox 21.0

    my application works fine in chrome and internet explorer when it comes to crystal reports but Firefox is not rendering them properly. they are disturbed and toolbar is also not visible. i am using visual studio 2008 for development and the crystal reports that come with it. it works fine on local system but have issues when deployed on online server. all my clients are facing the same problem. they have to use alternate browser for printing reports. But i would be happy if Firefox renders them correctly. Anyone can help?

    i made this change in my code using Visual studio 2005 VB
    rpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response,
    False, "Title you want")
    it make me a PDF and i dont need the cristal report bar to print it
    i hope you help you

  • My existing object styles are not visible

    My existing object styles are not visible in the object style panel- only via quick apply (so I know they exist)
    Any idea how I can make this panel functional again?
    Using CS6
    Thanks!

    @ Bob, I think you posted the response to a differnt question...
    @ chandasz, see Replace Your Preferences

  • I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    Some updates and clarifications:
    1. I already have my 2.4 channel fixed.
    2. Wireless network name is 8 alphanumeric characters; no spaces
    3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
    4. I am running Airport Utility 6.0, Mac OS version 10.7.4
    I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
    An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

  • Function and attribute tabs not visible in ppoma_crm

    Hello Experts,
    Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
    Is it due to some authorization issue ? or anything else ?
    Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
    Kindly revert
    Thanks and Regards
    DJ

    Hi DJ,
    Please see note 926540 - Missing Organisational units
    But from your description this does not seems to be the exact symptom.
    Yes I would advise to run a SU53 authorization check.
    Best regards - Christophe

  • "Files" and other tabs not visible for document library after script editor webpart is added

    I created a document library and uploaded a few documents to ti.  On the ribbon, I could see both "Files" and "Library" tabs.  I then added a Script Editor webpart to this page because I needed to run some javascript on this
    page.  Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab.  My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
    library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there.  If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
    now Sharepoint knows that I'm working with a document library.  Is there any way aroudn this?  We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs.  I'm not sure why Sharepoint would
    be confused by the Script editor webpart.  It is not visible so when the page is not in edit more, you can't even see that Script editor.  So, my question is: is there any way to:
    - either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
    - or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
    I also experienced this issue when I wanted to insert some customized text on the same page that had a document library.  For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
    show some text at the top.  That also caused the Files and Library tabs to disappear.
    thanks,

    Hi,
    I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
    This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
    https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Email tabs not visible

    Hi.
    I've just migrated to BT mail so still finding my way around.  One thing is bugging me (yes, only one at the moment!).  When I open an email, read it and then want to simply move onto the next message, I can't find a way to do it!  There's no "Next Message" or Previous message buttons.  The Help suggests there should be an Inbox tab, which there is, and that each message should display in its own tab as it's opened, so I could switch between the tabs (as it was with BT Yahoo), but these tabs are not visible for me.  There is an Inbox tab and then as I open a message no new tab displays (the Inbox tab just updates with the message).  I have to click the Inbox in the left pane or the little icon next to the Inbox tab so I then lose the message. I can't find any setting, etc.  Does anyone have any suggestions?  I use Google Chrome so am wondering if that's got something to do with it. 
    Thanks in advance!

    If you set it up as an IMAP account, not a POP3 account, it will replicate all your folders and emails that you have on webmail. You do not need to import them it will do it automatically.
    See link for setting it up.
    http://windows.microsoft.com/en-gb/windows-vista/windows-mail-setting-up-an-account-from-start-to-fi...
    and this link for the settings you need.
    http://bt.custhelp.com/app/answers/detail/a_id/44917/kw/bt%20mail/c/346,6588,6591
    When setting it up select the manual set up rather than the wizard. Make sure you put the correct settings in the right place and you will have no problems. It will take you less than 15 minites to set up.
    Hopefully once you have done that you will wonder why you ever used webmail.

  • Tab Not Visible in Internet Explorer 10

    Hi,
    We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
    Thanks
    Sudhir

    Sudhir,
    The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
    But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
    But please see {thread:id=2519792} for some ideas.
    Good luck,
    Howard

  • Configuration tab not visible in CRM ORDER

    Hi,
    When I use the CRM_ORDER_MAINTAIN function module to create the CRM ORDER, the configuration tab is not visible and when I use the same data to create the CRM ORDER manually through CRMD_ORDER, i can see the configuration tab. What could be the problem?
    Infact I am using CRMXIF_ORDER_SAVE FM to create the order.
    Regards,
    Roopesh

    Hi,
    Try with the below code in .HTM .
    <%@page language="abap" %>
    <%@extension name="thtmlb" prefix="thtmlb" %>
    <%@extension name="chtmlb" prefix="chtmlb" %>
    <%@extension name="bsp" prefix="bsp" %>
    <chtmlb:configTable actionsMaxInRow       = "3"
                        displayMode           = "FALSE"
                        allRowsEditable       = "TRUE"
                        downloadToExcel       = "FALSE"
                        enableTableGraphics   = "TRUE"
                        id                    = "table"-------you can give your table id
                        onRowSelection        = "select"
                        personalizable        = "FALSE"
                        selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                        selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                        selectionMode         = "<%= X->SELECTION_MODE %>"
                        table                 = "//X/Table"
                        usage                 = "ASSIGNMENTBLOCK"
                        visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                        visibleRowCount       = "25"
                        width                 = "100%"
                        xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
    REPLACE X WITH YOUR CONTEXT NODE.
    Regards,
    Gangadhar.S
    Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

  • LifeTime tab not visible for WPC content

    Hello,
    For any WPC content if we go to Details -> Properties, there is tab called Lifetime where we can set from when to when this content is valid.
    Some how it is not visible for any of my content in my new installation. I am using Portal 7.0 SP16.
    Point will be awarded to resolve this issue.
    Also I wanted to ask does this LifeTime means content should be unavailable after the Expiry period we set here, correct?
    regards,
    Jaish

    I went to SAP Tech Ed in Las Vegas and came to know that there is bug in WPC for this so they removed this feature in SP16 of Portal 7.0. This is why I was not seeing this after the version update.

  • Pinned tabs not visible.

    After I pin a tab In ff29 it disappears to the left of the tab row. I see an empty gray box there where the pinned tabs were visible in ff28.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Does it help to open a new window?

  • Visa server security tab not visible

    I want to enable the visa server for remote visa connections to the serial port, when I go into MAX to setup the visa server security the tab is not visible. I have a 2nd system and I can see the tab. Is some setting needed to enable the security?

    Hello Chris,
    I would expect that this is because of a version difference in your two machines. What OS are they? What version of VISA are they using? You can see the VISA version in MAX under the software folder. Also, to clarify, are you speaking about the "VISA Options" tab that appears when you select NI-VISA from the software folder, or something else?
    If you need to download a newer version of VISA, see here for all VISA versions:
    http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BAC002C51FA?opendocument&node=132070_US
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • Configuration tab not visible in the costom view created.

    HI All,
    My requirement is:
    To create a view in the standard component : BT301i_lam (Financial service item level).
    For this i followed following steps:
    1> Added item component through EEWB.
    2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
    3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
        Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
    Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
    Thanx.
    Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

    Hi,
    Try with the below code in .HTM .
    <%@page language="abap" %>
    <%@extension name="thtmlb" prefix="thtmlb" %>
    <%@extension name="chtmlb" prefix="chtmlb" %>
    <%@extension name="bsp" prefix="bsp" %>
    <chtmlb:configTable actionsMaxInRow       = "3"
                        displayMode           = "FALSE"
                        allRowsEditable       = "TRUE"
                        downloadToExcel       = "FALSE"
                        enableTableGraphics   = "TRUE"
                        id                    = "table"-------you can give your table id
                        onRowSelection        = "select"
                        personalizable        = "FALSE"
                        selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                        selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                        selectionMode         = "<%= X->SELECTION_MODE %>"
                        table                 = "//X/Table"
                        usage                 = "ASSIGNMENTBLOCK"
                        visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                        visibleRowCount       = "25"
                        width                 = "100%"
                        xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
    REPLACE X WITH YOUR CONTEXT NODE.
    Regards,
    Gangadhar.S
    Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

  • GNOME 3 : "drag-and-drop" + "Alt-Tab" not working

    Hello,
    In GNOME 3.2.1 with Mutter 3.2.1 (current ones in Arch), it is supossedly fixed the following "bug":
    Mutter 3.2.1 changelog:
    * Allow keyboard window switching (alt-Tab) during drag-and-drop [Matthias, #660457]
    But I can't make it working.
    As test, I open a folder (maximized) and vlc (background). I drag a movie file with left click mouse and pressing Alt-Tab makes nothing.
    In fact, when I press Alt the file icon changes to a question mark "?"...
    Has anyone been able to make it work?
    Thanks in advance,
      Franz
    Last edited by franzrogar (2011-11-01 08:48:40)

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for