Roles in OAM - plus help get "See Also" back to original?

Hi,
I was investigating creating a new role in OAM, and found the following:
Re: How to create Role in COREid 7.0.4
So, I tested per the posts there, setting the Display Type for the SeeAlso attribute to Object Selector.
Sure enough, then when I went to attribute access control, the "See Also" role appeared as a checkbox.
Ok so far.
What that thread doesn't explain is once I've configured the SeeAlso attribute and the "See Also" role, how do I assign that "See Also" role to an individual user?
Does anyone know?
Now, I want to get the SeeAlso attribute back to its original condition, with Semantic Type of "None" and Display Type of "None" (in "Modify Attributes"), but I can't :(!!
When I try to Save, I get a popup:
"Display Name and Display Type are required input!"
Can anyone tell me how I can get SeeAlso back to its original condition?
Thanks,
Jim

Hi,
I think that I've figured out the first question, i.e., "how do I assign" a role to an individual user.
Basically, if I go into a user profile, and click on "Select" for my "See Also" role, and then select a different user (e.g., user10), then user "user10" takes on the "See Also" role. I can then (for example) check the "modify" for the "See Also" role for an attribute like BusinessCategory for user "user1" in attribute access control, and then "user10" has the right to modify the BusinessCategory attribute for "user1".
On my 2nd question, I still haven't figured out how to set the SeeAlso attribute back to its original condition (i.e., remove the "See Also" role). If anyone knows how to do this, please post.
Thanks,
Jim

Similar Messages

  • Help get my speed back to what it was.

    Hi
    Last month the mods reset my profile as due to a series of power cuts etc my speed had dropped. At the time my speed was about 1.5M but after help from the mods it was back up to about 3M and has been like that since. However, today my speed seems to have dropped again even though router has been up continuously for 9 days. Can someone help get my line back to its top speed? Thanks
    For info here are my current stats..

    Just to add to my own post, here are the router logs from this morning which I guess is when my line dropped and when it cam back up the speed had dropped..
    Why did the link go down and why when it came back up had my speed dropped by a meg?
    Thanks
    Jun 4 07:09:01 daemon crit kernel: Line 0: ADSL link down
    Jun 4 07:09:01 daemon warn kernel: bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
    Jun 4 07:09:01 daemon warn kernel: bcmxtmrt: DSD(8a5f4d9c) - 128
    Jun 4 07:09:01 daemon warn kernel: HOST XTM tx ch 0 disabled.
    Jun 4 07:09:01 daemon warn kernel: bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
    Jun 4 07:09:03 daemon crit kernel: Line 0: xDSL G.994 training
    Jun 4 07:09:06 daemon notice syslog: pppd:Terminating on signal 20.
    Jun 4 07:09:06 daemon crit syslog: Clear IP addresses. PPP connection DOWN.
    Jun 4 07:09:06 daemon crit syslog: Clear IP addresses. Connection DOWN.
    Jun 4 07:09:12 daemon crit kernel: Line 0: ADSL G.992 started
    Jun 4 07:09:19 daemon crit kernel: Line 0: ADSL G.992 channel analysis
    Jun 4 07:09:25 daemon crit kernel: Line 0: ADSL G.992 message exchange
    Jun 4 07:09:26 daemon crit kernel: Line 0: ADSL link up, Bearer 0, us=712, ds=1831
    Jun 4 07:09:26 daemon warn kernel: bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
    Jun 4 07:09:26 daemon warn kernel: bcmxtmrt: MAC address: 00 04 ed fd 14 c9
    Jun 4 07:09:26 daemon warn kernel: [DoCreateDeviceReq.3244]: register_netdev
    Jun 4 07:09:26 daemon warn kernel: [DoCreateDeviceReq.3246]: register_netdev done
    Jun 4 07:09:26 daemon warn kernel: [FAP0] xtmCreateDevice : devId 0, encapType 1, headerLen 0
    Jun 4 07:09:26 daemon warn kernel: bcmxtmrt: DSD(891855dc) - 128
    Jun 4 07:09:26 daemon warn kernel: XTM Init: 400 tx BDs at 0xaa7a0000
    Jun 4 07:09:26 daemon warn kernel: bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=712000, DS=1831000
    Jun 4 07:09:26 daemon warn kernel: [FAP0] xtmLinkUp : devId 0, matchId 0
    Jun 4 07:09:26 daemon notice syslog: pppd:cms logging initialized.
    Jun 4 07:09:26 daemon notice syslog: pppdPPoATM setdevname_pppoatm
    Jun 4 07:09:26 daemon notice syslog: pppdPPoATM setdevname_pppoatm - SUCCESS
    Jun 4 07:09:26 daemon notice syslog: pppd 2.4.1 started by admin, uid 0
    Jun 4 07:09:26 daemon notice syslog: PPP: Start to connect ...
    Jun 4 07:09:27 daemon warn kernel: netdev path : pppoa0
    Jun 4 07:09:27 daemon info kernel: -> atm0
    Jun 4 07:09:27 daemon notice syslog: pppd:Using interface pppoa0
    Jun 4 07:09:27 daemon notice syslog: pppd:Connect: pppoa0 <-->
    Jun 4 07:09:36 daemon notice syslog: pppd:LCP: timeout sending Config-Requests
    Jun 4 07:09:36 daemon notice syslog: pppd:Connection terminated.
    Jun 4 07:09:39 daemon notice syslog: PPP: Start to connect ...
    Jun 4 07:09:39 daemon warn kernel: netdev path : pppoa0
    Jun 4 07:09:39 daemon info kernel: -> atm0
    Jun 4 07:09:39 daemon notice syslog: pppd:Using interface pppoa0
    Jun 4 07:09:39 daemon notice syslog: pppd:Connect: pppoa0 <-->
    Jun 4 07:09:43 daemon crit syslog: PPP LCP UP.
    Jun 4 07:09:43 daemon notice syslog: pppd:Warning - secret file /etc/ppp/chap-secrets has world and/or group access
    Jun 4 07:09:43 daemon notice syslog: pppd:No CHAP secret found for authenticating us to bras-red9.sl
    Jun 4 07:09:43 daemon notice syslog: pppd:Remote message: CHAP authentication success, unit 16981
    Jun 4 07:09:43 daemon notice syslog: pppd:local IP address 86.182.11.60
    Jun 4 07:09:43 daemon notice syslog: pppd:remote IP address 217.32.147.104
    Jun 4 07:09:43 daemon notice syslog: pppdrimary DNS address 213.120.234.58
    Jun 4 07:09:43 daemon notice syslog: pppd:secondary DNS address 213.120.234.26
    Jun 4 07:09:43 daemon crit syslog: Received valid IP address from server. Connection UP.

  • Need help getting flash player back

    i had flash player 7.0 but i didnt think i was going to need
    it so i uninstalled it....now i cant watch utube,,ufc clips....or
    anything i was once able to watch....i really need help getting it
    back what can i do to get it back....i just want the one i
    had...not an updated one....

    Hello,
    Welcome to Adobe Forums.
    This might help you : http://forums.adobe.com/message/5130002#5130002
    Thanks,
    Vikram

  • Please help get my photos back :(

    how can i get my photos back from my other iCloud back ups on my phone? they are only on my iCloud back ups on my phone not my computer, i have a Windows please help

    Did you buy the iphone new or used from someone? Also what carrier are you on?

  • Help get my keypad back!

    Am using a non-mac keyboard. Usually use the delete and up/down arrows on the numbers area, and can do this by unclicking the numbers lock.
    But once i attached the keyboard to my mac it is no longer possible to undo the num lock.
    Is there anything I can do about this to get my keypad back???
    Thanks!

    Hi Epalinges!
    You have posted your inquiry, in the Discussions Forum, that is intended for discourse about the use of Apple Discussions.
    You will get more focused attention to your issue, if you select a more appropriate location from this page Discussions Forum Home.
    From there, select the Category Using Mac OS X v10.4 Tiger.
    On the page that opens, select the Forum Using Mac OS X Tiger.
    Good Luck!
    ali b

  • HOW CAN I GET MY MAIL BACK TO ORIGINAL SETTINGS?

    I Have an iMac OS X V10.6.8 using Airport Extreme & WiFi.  I deleted some files on my Apple Mail that I added but I messed up somewhere because I don’t know how to get my Mail back to the was it is when you 1st get an imac and how it’s set up.  Can I reset it back to the original way.  I believed this happened when I synced my AOL Mail I don’t need or want AOL on it anymore.  But I took that off and just want my regular mail back?  Any help out there?  I’ve been trying but no one has been able to help me yet.  If there is no way, just let me know.  Thank you.  Lisa

    You can try this tool from Apple
    https://ssl.apple.com/support/mail-settings-lookup/
    Also try contacting your email provider for help in setting up for their system

  • HELP get my account back!

    HEY, my account, [Redacted for safety and security]...I can't get back onto it. I accidently unlinked it from my microsoft account because I wasn't paying attention to what I was doing. I tried to log into my account to merge them together, but I can't seem to remember my password. Logging into skype via my microsoft account doesn't help because it just asks me to merge (which I can't do because i forgot password), or make a new account (which is the one I am currently on). I pressed forgot username, but that just sends me an email with a code to change my password FOR MY MICROSOFT ACCOUNT. So it doesn't help me. I kept trying but now it refuses to send anymore codes, I HAVE TO WAIT AND ENTIRE DAY, and I can't keep trying different passwords because it keeps saying I've entered my password wrong too much! What a hassle! PLease help. ;.;
    First things, first: for your safety and protection, please never, ever include any personally identifiable information such as your real name, Skype account name, e-mail address, or a telephone number in a post on a public Community or forum such as this. Thanks!

    Hi, Foxtail14,
    Please see these recommendations:
    http://community.skype.com/t5/Security-Privacy-Trust-and/On-forgotten-passwords-and-lost-emails/td-p...
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Need help getting tv shows back into itunes

    Okay, a little explanation is required before I get to my question
    I had some problems with my computer that to fix it, the geniuses did archive and install and deleted my user account, and set up a new one for me.
    After this, I was able to recover everything, and deleted the previous system it had created in my hard drive. The only problem I have encountered is that it will not let me put my tv shows that I have downloaded from the itunes store, back into itunes, despite the fact that it let me put all my music back.
    I want them in there, so that I can put them on my ipod, and I thought that when I updated my ipod it would just add the new stuff, and all my old stuff would still be there. But since it is synced with the old account, it says that it will delete my ipod and resync it, and I will be without my tv shows. I have also tried just dragging them into the ipod, but that doesn't work either.
    So my question is, how can I get them back into itunes without repurchasing them?

    Do the TV Shows actually appear in your iTunes library? If not, what happens when you try to add them?
    If the shows are in your library, have you checked your syncing prefs to see if they've defaulted. (TV Shows tab when iPod is connected.)
    Do you get any error messages related to this problem? Were the TV Shows and Music files purchased with same account? All they authorized on the same number of computers?
    Not sure, but I have read about deauthorizing then re-authorizing your account. But you're only allowed to do this once a year ---or maybe once a year on ALL accounts (if you have more than one). You might want to inquire or search the forum on this point before proceeding.
    Hope something here works for you...
    Diane Wordsmith

  • Help getting auto-sync back

    I lost my hard-drive to laptop in fall '06. I-Pod library went w/it. I was able to get help to get the Library downloaded to new computer... all songs show up using "Manual load" directions. Now- I can't get new songs to load. it's like it's created another library on same computer. When it asks if I want to load new songs- it wants to delete my library? Don't want to lose 385+ songs already in "old" library. Any suggestions on how to get them to merge? Please keep instructions simple-I'm new at this... Thanks for help!!

    I am answering my own question here. I figured it out all by myself. Since it is set up to manually merge, all I had to do was click and drag the "new download songs" to my I-pod music. Too SIMPLE!!

  • ZUNE screwed up my library! Help get my artwork back!

    I used ZUNE to stream some music to my Xbox yesterday (my mistake, I know) and now a ton of my albums, even those that are rare and I had to scan the album artwork, don't have any artwork under iTunes. If I open the song file in WMP, the artwork I scanned (complete with my fingers on one of them, so I know they're mine) are still embedded in the file, but for some reason, iTunes isn't seeing it now.
    I uninstalled and reinstalled iTunes twice, re-imported my Library, and to no avail. Help!

    Hi Mike!
    You are correct.
    The folder I moved is the last in the string of: Macintosh HD:users:XXXX:music:iTunes
    Instead of going one step further and moving the individual folders within the iTunes folder, I did a "drop and drag" of the entire thing to my new HD in the finder.
    At first, when I opened the iTunes folder I moved, none of its contents were visible on the old HD. When I rebooted the computer without the new drive attached, all of the folders that were in that folder (iTunes Library, Album artwork, etc.) have reappeared, but are empty. My inclination at this point is to simply reload everything from my optical disc backup and make the move correctly this time.
    m

  • Help get closing tags back

    Thanks to anyone who can help!
    I have had CS3 on a new Mac now for three months. It had been
    nicely filling in closing tags the moment I hit </ I have looked
    at "Preferences" and it DOES have the proper settings to fill in
    closing tags, however it is not doing so.
    Also, it is no longer giving me the drop down list of
    possible html tags when I type them. I have to type the whole
    thing.
    I have tried window>workspace layout> default but that
    does not good. Can someone help?

    On Edit > Preferences > Code Hints I'm assuming you
    have the After typing
    "</" selected.
    Do you also have the Enable code hints checkbox checked?
    Do you have the Delay set to 0?
    And are all of the Menu items checked?
    If you answer yes to all of these, I don't have any other
    suggestions,
    sorry.
    Ken Ford
    Adobe Community Expert Dreamweaver/ColdFusion
    Adobe Certified Expert - Dreamweaver CS3
    Fordwebs, LLC
    http://www.fordwebs.com
    "dunnyesterday" <[email protected]> wrote in
    message
    news:g9fjnp$hp$[email protected]..
    > Thanks to anyone who can help!
    > I have had CS3 on a new Mac now for three months. It had
    been nicely
    > filling
    > in closing tags the moment I hit </ I have looked at
    "Preferences" and
    > it
    > DOES have the proper settings to fill in closing tags,
    however it is not
    > doing
    > so.
    >
    > Also, it is no longer giving me the drop down list of
    possible html tags
    > when
    > I type them. I have to type the whole thing.
    >
    > I have tried window>workspace layout> default but
    that does not good.
    > Can
    > someone help?
    >
    >
    >

  • Help getting erased info back!!!

         So I'm in college and one of my friends thought it would be funny to pull a prank on me and disable my Iphone 5 by typing in the wrong password multiple times.  After awhile, it reset my whole Iphone! Now I knew this was possible but never checked it off under the settings (to reset after a certain amount of wrong passcode atempts). He says it was like that by default but after some research I found out that it is not by default so he did it on purpose. Anyways, I havent backed up my Iphone in forever so connecting it to itunes wont do me any good. I was wondering if there was a way that i can retrive all of my lost data like photos (that are very important to me), contacts, messages, videos, all of that stuff. If anyone know of a way or could help it would be greatly appreciated! Thank you!

    You can not get back what you did not back up. It no longer exists.
    Sounds like you need to find new "friends".

  • I need help getting my photos back on my iPad!

    So my iPad had a lot of photos. My photos were syncing to my computer I think and then all of the sudden, I looked on my iPad and they all disappeared. I didn't delete them. Then I looked back on my iPad and they were syncing back. Then I let them sync for a day or two and then they disappeared again. I really want my photos back. :( please help someone.

    Hi karate2014,
    Music and apps purchased under one Apple ID are not transferrable to another Apple ID, nor can ID’s be merged. See this article -
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    It is possible, however, to use different Apple IDs for different purposes on a single device such as your iPad. See the same article under -
    Using one Apple ID for iCloud and a different Apple ID for Store Purchases
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Need Help Getting RealPlayer to Back Off!

    Previously all my video clips were stored with a QuickTime icon on them... and when I clicked on them to view --they ran thru QT. But somehow/somewhere RealPlayer has TAKEN OVER all my video clips (which now appears as a white blank page of an icon) and when I click them to play them --they play thru RealPlayer.
    That wouldn't be so bad but, RealPlayer (at least the free version I have) won't "loop" the video clips. I spent nearly an hour today texting with a RealPlayer tech to find that out!
    SO, does ANYONE know how to make QuickTime the 'ranking' player of my video clips again, like it used to be?
    Some setting must have changed somewhere, and I'd like to set it back the way it was before.

    [Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
    *Changing the application used to open all files of a certain kind*
    1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
    2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
    3) In the lower part of the info window there is an "open with" menu with a list of applications.
    4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
    5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
    6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
    7) Close the get info window.
    [10.4: Enable 'Open With for all' to work for certain apps|http://www.macosxhints.com/article.php?story=20051104055843452] - Problem applications where the standard application assignment routine doesn't work.

  • Help getting from window back to mac

    cant get out of the windows i run on my mac for scool did this one time befor and cant remember how to get back to mac

    Reboot your MacBook. As soon as you hear the boot chime, hold down the Option key until the Disks shows up. Choose your Mac hard drive (click on it and then the arrow below it.) When you are in your Mac OS go to System Preferences>Startup Disk and click on your MacBook hard drive. After that you should start up in Mac OS.
    You can use the Option key trick to switch back to Windows.

Maybe you are looking for

  • Tdms Store Millisecon​d

    My requirement looks simple. I need to acquire data from 8 analog channels and store in a flat file. I need to acquire data every 5 ms and store the same. This has to go for 10 to 30 days. This is huge data. Latter, I need to retrieve the data based

  • Itunes pausing

    my itunes keeps pausing and re-playing music on its own, what could be the problem? im using a macbook pro, with the latest update of itunes

  • Ical info appears in blocks when cursor is idle while I'm in other programs

    This is just an annoyance that takes my ADD mind of task, but for some reason there are hotspots on my screen that will bring up calendar and to do item info even when ical is not even open. For example, the one open now says "url: mailitem:[lots of

  • Customize search result types in SharePoint 2013

    Hi I want to create the new Search Result types based on existing "List SharePoint Item" result type. I know how to do it manually . But i want it to automate it. can i do it using powershell script? is there anything available or somebody tried anyt

  • Can a reader enabled form do this ... ?

    I have a flowable Dynamic PDF form that pre-populates form fields based on a schema , etc. <br />It was designed using Live Cycle Designer 8.2 and Acrobat 9.0 . <br /><br />When I am using it with Acrobat - I usually go to <Forms> ... <Import Data> a