Roles not displayed in BEx Analyzer for NW2004s
We are evaluating a technical upgrade only from BW 3.5 to Netweaver2004s. Under this plan, the 3.5 security will not be migrated to 7.0. We are using SAPGui Frontend 6.40 for BI. The existing BW 3.5 roles are not display in the Role Menu of SAP NetWeaver BEx.
Any ideas on this?
Isbell
Got the following response from SAP and this resolved the issue
please add the parameter
DELETE_DOUBLE_TCODES with PATH = 'NO'
into the table: ssm_cust (via tx: se16)
The settings in SSM_CUST defines a compress mechanism for the user menu
known as "Redundancy avoidance" and described in notes 357877 and 357693
Redundancy avoidance deletes easy access menu entries for doubled
transaction codes whenever SSM_CUST contains
1. an entry CONDENSE_MENU with PATH = 'YES' and
2. either an entry DELETE_DOUBLE_TCODE with PATH = 'YES' or no entry
DELETE_DOUBLE_TCODES, at all.
If you don't want doubled transaction codes to be deleted, then simply
add an entry DELETE_DOUBLE_TCODES with PATH = 'NO' into table SSM_CUST.
Suresh
Similar Messages
-
Chinese characters not displayed in Bex Analyzer
Chinese characters in a BI report display fine in Bex Web, but not in Bex Analyzer (Excel). Not sure if this is a NW2004s issue, or just an excel config issue. Is this a known issue?
The problem is fonts. Are you setting a specific font for your dialog? If not, this is a JRE bug. Regardless, you can display the Chinese if you set the font for the dialog using a font that you know contains Chinese glyphs.
John O'Conner -
Input variables not displayed in bex analyzer
Hello Experts ,
I am facing a problem .I am displaying a report on bex analyser 7.0 and i am entering some input variables.
But my problem is when the result is displayed in the analyser and i am trying to take a print out everythg is coming in the print preview except the input variable values which i have used.
And i have to show this printout to the client and i am clueless how to make those variables visible in my analyser so that i can take printouts.
Pls help me on this.
I will be greatfull.
Regards,
Suyash
Edited by: sarang bhalerao on Mar 20, 2009 11:05 AM
Edited by: sarang bhalerao on Mar 20, 2009 11:05 AM
Edited by: sarang bhalerao on Mar 20, 2009 11:05 AMPlease do not raise same posts across forums..
/thread/1278673 [original link is broken]
The above post is being deleted as duplicate.. -
ROLES not found in BEx Analyzer
Hi Gurus,
I have created a role and assigned it to a user.My problem is when i am trying to assign a query to this role, it says that there is no role defined.
I am not able to see the role i have created in BEx query selection screen.Could someone help me on this.
Thanks in advance.
Regards,
satyaHi,
when we are trying to save the query my role is not appearing so am not able to save it.
My query appears in that particular role only when it get's saved in that role.But the role I have created doesn't appear at all.
regarda,
satya -
On the web how can I check the user role to display the form suitable for this role i
Hello
How can I check on the web the use role to display the a form for each role
Example
If the admin login I display admin_form.fmb and if user login I display
user_form.fmb
Thankx
TamerIn my forms I hide tab pages according the role using something like the following script in the WHEN_NEW_FORM_INSTANCE trigger.
So the user can not navigate to tabs which are vorbiden by his role.
CURSOR users_roles_cur IS SELECT granted_role FROM user_role_privs
WHERE username=(SELECT user FROM dual);
user_roles_rec users_roles_cur%ROWTYPE;
IF users_roles_cur%ISOPEN
THEN
CLOSE users_roles_cur;
END IF;
OPEN users_roles_cur;
LOOP
FETCH users_roles_cur INTO user_roles_rec;
EXIT WHEN users_roles_cur%NOTFOUND;
MESSAGE (user_roles_rec.granted_role);
PAUSE;
IF RTRIM(user_roles_rec.granted_role,' ') = 'BLA-BLA'
THEN
tb_pg_id := FIND_TAB_PAGE('activity');
IF GET_TAB_PAGE_PROPERTY(tb_pg_id, visible) = 'FALSE' THEN
SET_TAB_PAGE_PROPERTY(tb_pg_id, visible, property_true);
END IF;
END IF;
END LOOP;
CLOSE users_roles_cur;
Other solution may be is to use an initial form which only will detect the user role and run the appropriate form.
Other solutions are also possible.
Joseph -
Webi Vs Bex Analyzer for the same query
Hi Experts ,
I face an issue in Webi Vs Bex Analyzer for the same query :
Output of Bex query:
Transport System Location ID Quantity
PIPEC1-Z4 LOCCP1-Z4 1,000.000 BBL
LOCCP2-Z4 400 TO
LOCGAL-Z4 *
LOCRAS-Z4 200 TO
Result *
Here as the Unit of measure is different, the RESULT displays a *
Only in cases where the unit of measure is the same, the result
is displayed correctly.
However in webi, the sum function blindly adds up without any possibility
to check whether the uom is the same.
How can I check to add only when the units are the same ?
Regards, Jerin.Hi Jerin,
Each Key Figure used in a BW query can have up to three different sets of information:
Numeric value of the Key Figure corresponding to the Key Figure without the unit.
Unit or Currency information, A Dimension object with character format that contains the unit or currency. For example, 'USD', 'u20AC', 'km'
Formatted value, representing the user-specific formatting. A Dimension object with character format that contains the Key Figure and the unit (formatted value) based on user preferences configured on the SAP server. For example, '200 USD', '345 u20AC', '25 km'
Each Key Figure is represented with a Measure object in a Class u201CKey Figures.u201D In the case where the Key Figure is configured in BW with a unit, an additional Dimension object will be added representing the unit information. The u201CFormattedu201D value represents the numeric value Formatted as a string value, following the user-specific formatting settings.
Or if doesn't appear the Unit, for some CKF or RKF it happens, you can add to your BEx query and then to the universe the unit or currency and create a separate dimension with that information.
I hope this help you.
Best regards,
Fede -
Text data is not displaying at Report level for an Infoobject Item name
Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue. -
Both my iPhone & iPad now on version 7 do not display the airplay connection for my Apple TV ?
Hey Barry02,
Thanks for the question. I understand you are experiencing issues with AirPlay. The following resource may help to resolve your issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Because the issue is occurring on both devices, it may be isolated to the Apple TV itself. You may want to troubleshoot the Apple TV connection:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Thanks,
Matt M. -
Windows could not display the images available for installation
I am trying to perform unattended installation of windows which I created with Windows AIK. When I add answer file on USB's with windows installation root I get "windows could not display..." message. Problem is there even when there are just a
few simple lines (oobe, microsoft international core-WinPe).
I replaced install.wim file of standard windows installation iso with customized install.wim and then created catalog file with windows system image manager.
Kind people of world, please help!Hi bugili,
Could you help us post the complete error information, it will more helpful when we locate the issue. I am not quite understand “add answer file on USB's with windows
installation root”, do you mean the answer file and install file on the external device? Please try to confirm this image has the same Security permission with
others image in WDS image share folder, the WDS default image location is like
x:\RemoteInstall\Images.
If it not work please post the WDS error log,
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
The simlar thread:
Windows could not display the images available for installation.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/07fe03dd-9798-4583-8d0b-dc963c95434c/windows-could-not-display-the-images-available-for-installation?forum=winserversetupMore
information:
How to Add a Boot Image to WDS Server
https://social.technet.microsoft.com/wiki/contents/articles/11643.how-to-add-a-boot-image-to-wds-server.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Variable Screen Does Not Display in Bex Web Analyzer after first time
We recently upgraded from BW 3.1 to BW 7.0 (without upgrading specifically to 3.5). We are having a problem with our Web Bex Analyzer not showing the variable screen although the variable screen is displayed successfully when running the same query from the Bex Analyzer. Based on feedback from other posts regarding similar topics, we modified the 0analysis_pattern template to ensure that Display Variable Screen was checked on. We are finding that when we open the Web Bex Analyzer and do a New Analysis, the first query we try to run will always have the variable screen displayed successfully. Any susbsequent queries we try to run by clicking on New Analysis in that same open window will not show the variable screen and will start executing open ended. This is occurring regardless of whether the query has mandatory or optional variables and we have confirmed that there is no personalization set for the variables being used. We have tried it with several different queries and the results are consistent. The first query you run shows the variable screen successfully and any queries run after that do not. Any help in resolving this would be greatly appreciated as we have exhausted our resources researching and troubleshooting this problem.
We did open an OSS note and heard back from SAP. We made the recommended setting, see their response below, but as they stated, it will only show variable screens for queries that have at least one mandatory variable entry after the first query is opened.
Response from SAP:
Please check if the following setting is made within your template --
In the 'Standard Actions' of the Web Template, do you have the setting
'Action Before First Display' set to OPEN_VARIABLE_DIALOG
The behaviour of the variable screen is different if you use mandatory
variables and optional variables. If you have only optional variables,
the Display Variable does not force the variable screen.
Also, using the parameter VARIABLE_SCREEN=X only influences the
web application at STARTUP. This would not come into affect when you
use the 'New Analysis' button. This button resets the dataprovider so
this would not affect the variable screen and would not redisplay the
variable screen as you require. -
Query Not Running Via BEX Analyzer Role Menu
Hi All,
I have a problem when executing queries via the BEX Analyzer role menu. I can select a query from a role but, when I select the query to run, nothing happens. When I select the same query from the infoarea it runs without any problems. This behaviour occurs for all our queries so is not specific to a particular query.
We're running on version 3.5 and I've just upgraded to the latest patch but this hasn't helped at all.
If I use the role menu via the web application designer the queries all work fine so the problem looks to be pointing at the role menu within BEX Analyzer.
Any ideas ?
Davethis issue is more related to Security , Roles & authorisation.
u will have to talk to Security team.
While installing latest patch,usuallys uch trouble occurs.
the excel extensions , roles gets affected sometime.. -
"Enter in role" button missing in BEx Analyzer 7
Hello all,
I cannot see the button/option to enter an existing query into an existing role. I simply do not see the button "Enter in Role" in BEx Analyzer 7. I have SAP_ALL / S_RS_EXPL_A / S_USER_AGR access.
I do not want to do this thru Designer or WorkBook.
Please help me identify if I am missing on anything.
Regards
Sanjyoti have done it.. i have inserted query into the role.
Go to query designer and assign the queries into the role.
First you have assign a user into the role where you want to insert the queries. login with the userid then roles will be displayed in the open POPUP.
There click the enter to role tab and it will display the all the roles. you have to select the role to insert the query.
Hope this would help you. -
Variable window not showing through BEx analyzer
HI Experts,
I am facing a weired situation with one of the variable.
I have a Customer Exit variable which is Input Ready and entry is Mandatory, i wrote some code in CMOD to fetch default values through I_STEP=1 and my requirement is that user should able to change the values if needed.
now, the problem is, I can able to get the variable input screen when i execute the query through RSRT with Query display mode as HTML. But when i execute the same query in BEx analyzer or through RSRT with different Query Display modes like List/Bex Analyzer am not getting the variable input screen.
The variable is taking the default value generated through CMOD code and the same values are being used in determining the query output..
Please suggest me what do i need to do inorder to view the Variable input screen in BEx analyzer.
I am using BEx Analyzer 3.x for the queries and working with
SAP Version -
SAP EHP 1 for SAP NetWeaver 7.0
DB: -
ORACLE 11.2.0.2.0
OS -
AIXI found the solution in one of the SAP notes and the issue is resolved.
We used Note: "1609237" to resolve the issue. Hope this might help anyone who faces this same problem.. -
Conversion of characteristic values before displaying in Bex Analyzer
Dear all,
does anybody know whether it's possible to get influence on the manner in which a characteristic is embedded into an BEx Analyzer sheet (may be via user exit, function module exits or something else) .
In our project we have characteristics (describing production parameters) with numeric values which can't be used successfully with EXCEL AutoFilter functions because they are strings in EXCEL. Due to our data warehaouse design koncept it is not all right for us to store these values as key figures. So we are searching for methods to convert these string values into numeric values before we give them into the EXCEL sheet.
Lot of thanks for you in advance!
Dorothea Gebauer.High Leo Gillian,
at first thank you very much for your answer. Unfortunately your information is not practicable for us. There are hundreds of characteristics, in the future there may be mor than two thousend, which have to be converted before they are embedded into the sheets. Therefore we need an automatically done conversion.
with best regards Dorothea Gebauer -
Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SNHi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran
Maybe you are looking for
-
How can I get my phone to send mail through a RoadRunner accountnvia 3G
My iPhone 4S can receive e-mail addressed to my RoadRunner account when I am not connected to my personal WiFi base station, but I cannot send messages or replies until my phone is back in touch to my home WiFi. (Or I can send the reply from my mac.c
-
I keep getting an error message stating 'my start up disk is full'
Hello. I am a new mac user with a macbook with 120 gb. I was copying my itunes over to my mac from my ipod when I got the message 'start up disk is full' I am not sure if I understand..how can my disk be full when I just purchased my computer and don
-
How do I change a pdf document to word
How do I change a pdf document to a word document
-
i recently tried updating to ios 6, which actually left my ipod in a recovery loop. i got it to work again by getting to to the restore from backup part using my mom's computer. however, now that i want to update my music on it, everytime i plug it i
-
Horizontal Scroll in ALV Trees
Is it possible to have horizontal scrolling in ALV Trees , If possible suggest please.