Roles not showing up

Hi,
We are using EP sp 10, and using LDAP as our data source, we have just moved the portal content from Development to QA and despite attaching the roles to the users, when the users log in it shows up blank, to content at all.
Please advice at the earliest.
Thanks,
Swetha

HI Swetha,
please check your QA system is also configured with LDAP data source.
make sure that the user existing in development system also exists in QA  system
if it is not the case.
after transporting the content from developement to QA system u need to perform assigning the roles to user again.
or else u have other option like transporting the user details from developemnt system to QA system.
for this go to user Administration->export-> seacrch for all user and perform the expoert save the data in a notepad file using copy & paste (this is at development system side)
now login into QA system again go to user Administration->import-> select the note pad file
and perform the import operation
rgds
srinivas

Similar Messages

  • UME problem - ABAP roles not showing up in UME

    Hello,
    I'm having a problem where the ABAP roles (UME groups)  for my PI system are not showing up as assigned to a user in the UME.  The roles assigned to the user are not reflecting the roles (UME groups) that are in the ABAP side.  But, other users are showing up fine.    The user is shown to have only the standard basic roles.
    This works fine on my development and AS system.  Any help would be greatly appreciated. Thanks.

    Hi George,
    There is a 30 minute delay before these roles/groups show up in the Java system. Could that be the problem in your case?
    See the [documentation|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/af3ac012d32e78e10000000a155369/frameset.htm].
    -Michael

  • Composite role not showing in Access request screen. (BRM not used)

    Dear All
    I have created a composite role in backend system with 2 single roles.
    a. I have imported the single roles using the NWBC screen.
    b. run the auth sync job.
    c. imported the composite role as a techincal role using the NWBC import screen.
    the import procedure was successfully completed.
    But when i try to search for the role in Access request screen for a user - i can only see the single roles & not the composite roles?
    Pls advise
    Raju

    Hi Raju,
    In addition to Alessandro's valuable inputs, you need to be sure whether or not you were able to generate the composite roles (in NWBC).
    The final stage of the composite role has to be in complete status.
    Regards,
    Ameet

  • Transferred Roles not showing up  in WP3R

    Hi All,
              I have a BI 7.0 System which is connected with EP 7.0.
    I uploaded few roles from the BI System in the portal and made some changes to the uploaded role.
    Then i transferred these roles back to BI System from the portal using role transfer utility of EP.
    The report i get in the portal is showing that the roles are perfectly transferred with all the services.
    Now when i go to BI System to generate the authorization role and corresponding profile using TCode WP3R,
    i get the message 'No Matching Data Found' when i execute first option 'Maintain Roles ........'.
    All the system object and rfc destination are maintained properly and there is no problem with the connectivity between BI and EP.
    Is there anything else i need to do for wp3r to read the transferred roles from the portal??
    Regards,
    Azalina

    Hi Thaker,
    did you generated the role
    you have added any transactions or added manuall objects
    try in SUIM Role>>by role name>>give the role name and execute then click on transaction assignment
    hope this helps
    thanks
    kishore

  • ARA does not show Violations in a role though conflicting transaction codes are assigned???

    Hi,
    I have noticed that a role having conflicting transaction codes assigned in the back end system is not propelry analyzed and in ARA application. When this role is analyzed, "No Violations" message is shown though there are conflicing transaction codes assigned.
    As far risk definitaion is concerned, conflicting actions are properly defined in respective conflicting actions and thse actions are grouped in a risk, which is applicable to a logical group (which in turn has the connector included causing this problem) and they are active.
    Rule are properly generated for the all the risks and functions. However, at the time of running risk analysis for this role, ARA is not showing as risk.
    May any one please advise on this?
    Regards,
    Rehan

    Neeraj,
    Now I have defined SAP_R3_LG logical group as "SAP" connector type and regenerated all the rules. Still it is showing no violations!
    Below are the screens for your reference:
    Can you please advise?
    Regards,
    Rhn

  • ARQ: Role Import does not show roles in the preview

    Dear All,
    Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
    I implemented SAP note#1897975 Role import does not show roles in the preview.
    Still facing the same problem. Has any one faced this problem? Please suggest.
    Regards,
    Faisal

    HI Faisal,
    This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
    Regards,
    Neeraj Agarwal

  • Creating a custom role does not show up whe creating a user

    On portal 10.1.4 I have followed the directions in 10.1.4 Oracle Server Portal Configuration Guide.section 6.1.6.9.1 Example: Defining a User Administrator Role.
    However, the newly created role does not show up when I create a new user.
    Any suggestions?

    This is a bug in 10.1.2.0.2. It works if you create the group from the directory page OID

  • Role is not showing up in SUIM transaction

    All
    Z_PT_TRANS_ALL role was created for all
    Display access.
    When I go to SUIM
    Roles -> By Transaction Assignment.
    and search for roles this role is not showing up.
    However, role does have the transaction in S_TCODE.
    Please advise.
    From,
    PT.

    Roles by transaction searches for roles in the menu, not roles in S_TCODE.
    Use Roles by authorization values, enter S_TCODE object and the tcode in the field if you want to search for tcodes in S_TCODE.

  • CUA Roles residing in Child system are not showing in Central System

    I just hooked up CUA today and have linked 8 child systems to the central system.  The 8 child system users and roles have already been established in the child systems.  Do I need to run program susr_zbv_get_receiver_profiles in each of the child systems to get the roles in the child systems to show up in the Central System for each user?  I tried this in one child system and it worked.
    Or is there something else I need to do without going into each child system?
    I tried this program susr_zbv_get_receiver_profiles in the Central system but it did not work.

    are you looking for roles or profiles? profiles will not show up in the central system. If you run SCUL do you see anything? when you first added the child system did you use an SAP user that had the proper permissions? In both the child and the parent? There are two roles that the user must belong to to add the child to the parent they are SAP_BC_USR_CUA_SETUP_CENTRAL and SAP_BC_USR_CUA_CENTRAL.
    If you have any question about the permissions of these user at the time you added the child to the parent I'd delete the child and re-add with either the above roles or a user with SAP_ALL in BOTH the child and the parent systems

  • Transactional Iviews are not showing ( with out super admin role assigned )

    Please any solutions for the fallowing.
    First Problem
    I am not able to create the user from portal directly. Its showing the fallowing error.
    An error occurred in the persistence; contact your system administrator.
    so i had created the users in WAS by SU01.
    Second
    We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
    If u dont mine Please provide with me the steps to fallow
    Third
    i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
    Its showing the error
    Could not able to look up the system.
    And the problem with user mapping also .
    For aministrator its working fine .and for a general end user ( created on WAS )
    i am not able to provide user mapping. Its showing
    There are no systems available for user mapping for the selected principal
    wat could be the problem ?
    Your solutions will be appreciated .please urgent

    Hi Pratap,
    Second Problem
    If the Portal user name and R/3 user are the same then no problem other wise you have to do user mapping
    Third Problem
    Check the permissions. Right click the system object and give permissions for all
    Create an alias for the system object for doing user mapping
    First Problem
    Try creating user from http://<portalserver>:50000/useradmin
    Regards
    Arun

  • Rejected/Approved request not showing up for role owner

    Hi Experts,
    For some user ,approved/rejected/pending access request are not showing up in NWBC->My Home->Access Request Status.
    Its working fine for others.Although that user has approved and rejected the requests.But count still shows zero.
    I have validated that its not an authorization issue.Any suggestion on this is appreciated..
    Thanks,
    Mamoon

    Hi Mohammed,
    Thanks for quick response.But user(A) is role owner who has approved and rejected many access request.
    Although A has not created the access request but its another user (let say B). But how could role owner see what are the access request he has approved and rejected.Is there any functionality???
    Thanks,
    Mamoon

  • Role Menu in WAD is not showing reports as per the role attached

    Hello,
    I am using one role in the "ROLE MENU" web item in Web Application Designer(WAD).
    But, its not showing the reports attached to the role used in the WAD.
    What is the problem even if i am mentioning the correct role name in the properties of ROLE MENU.
    Please help me out.

    Hi Steve
    What BW Front-End Support Package are you using ?
    Sometimes it does matter especially with Role menu web item.Check with it
    -Doodle

  • Not showing the Data in VC application

    Hi I have developed the application in VC.
    It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
    when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
    Next day after i run the application , it is not  showing the data. displaying the message .
    "No Data Found".
    But when i run  the BAPI at the back end R/3 it is giving the data properly.
    Can u tell me what might be the problem
    REgards
    Vijay

    Hi Krishna,
    check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
    Check it with external debugging of the BAPI, when you can reconstruct the error.
    Best Regards,
    Marcel

  • Pop-up screen not showing while accessing transactions in SAP CRM WEB-UI

    When we are logging on SAP CRM WEB UI, for transactions like Lead, Complaints and Activities-
    Sometimes Pop up screen is showing for selecting transaction types, but sometimes it is not showing.
    We have tried it on different work stations with same user id and standard business roles , but we are not able to trace the problem. Also with same id sometimes error shows, "No business roles attached, not allowed to logon,
    after that when we tried on other workstation with same id we were able to access all transactions.
    Please suggest what would be the problem. 
    Rishikesh

    This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
    Just check if your business role is properly configured. Thats all i can say.
    Regards
    Kavindra

  • RAR Organizational Rules not showing/working on RAR 5.3_13.3

    Hello Guys,
    We are facing some problems during RAR Organizational Rules implementation. After creating our risk matrix (along with all functions) we start refining it with Org. Rules, accordingly to our company needs.
    Unfortunatelly, after doing some tests, we found out that all created organizational rules are not working. They simply do not show on our reports (Risk Analysis > Organizational Level section). Any advice on that? I already went through the "How-To Guides" and a few SAP Notes (987031) without succeed.
    As a business example, we have the need of certifying that a critical access (already mapped in a Critical Action Risk Type) is not a False Positive, checking also the organizational level for that specific activity (Company Code values) so, we are doing the following:
    1) In a given Auth. Obj, we are activating BUKRS field, with $BUKRS value;
    2) Created an Organization Rules.  (e.g Org. Rule Company01 with BUKRS = COMP, and tagged RISK ID RK01*)
    3) Re-generate/Update all risk rules
    4) Ran Organizational User Mapping Job
    5) Executed an Risk Analysis (Risk Analysis > Organizational Level section).
    The results of report are the same as a regular risk analysis. No Organizational Rule were found in our result (in Org. Rule Description columm) but just all users with ANY risk.
    Besides , the Org. Rule report ran the Risk analysis for ALL RISKS of our Matrix, not only for those mapped in our Org. Rule (RK01). Is this working properly? The organizational report should not only run a report for previously mapped risks ??? (in our business example, an report result with only users with Critical Access risk RK01 and with any Auth Obj with BUKRS Field value COMP!?)
    Can anyone help us on the error above?
    Thank you,
    Best Regards,
    Adam

    Hi Natasha,
    Reviewed the situation and suggest a work around. Just try whether the same is working or not.
    As mentioned the roles are assigned to HR positions of the users and not to user ids. In that case in RAR under configuration tab go to 'user mappings' where you can map user id with the organisation position for the respective users in the particular system.
    I suggest you can test it for one user and if works fine you can replicate for other users.
    regards,
    Jwalant

Maybe you are looking for