Roles showing complete SAP menu instead of customized.
Hi All,
We are on version 4.6C. We create some roles with some transactions and design the tree structure. But, when this role is assigned to a user, he is getting a complete SAP menu in which it is difficult for him to search the complete menu to check which transactions he is authorized.
Is there any option/parameter which i can set so that only the designed tree structure is visible for the user?
Please help.
Thanks
Vijay
Vijay Krishna Pericherla wrote:>
> I can't even use that little icon from my screen and i have sap_all profile. I have one more user for whom i have created a test role with a design which didn't work either.
Mind you, that you cannot switch to the user menu has nothing to do with SAP_ALL. Menus are contained in roles, not profiles. Do not mix up the two. For your second claim I'm lost. Looks as if every option came along in this thread.
What happens if you give yourself a role with a menu in addition to your SAP_ALL profile?
Similar Messages
-
Finished DVD plays (shows) complete green screen instead of movie for part of the movie
In Premiere CS4 the movie I made plays fine. In Encore timeline the movie plays fine. Yet when the DVD is burned and then played, part of the movie just shows up as completely green on the screen and then it will stop and the rest of the movie will play fine for a while and then the screen will go all green again. Any ideas of what I am doing wrong?
Lots more information is needed
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program -
How to add new folder in sap menu visible to all users
I want to add a new folder in sap menu. i can do it for my user id as it is user specific. I wanna know that how to add a folder so that every user able to see the same i.e irrespective of user-ids.
Hi Ramya,
This can be done in SAP menu instead of User Menu, provided all your users are using SAP menu. If a folder is created in User menu it would be visible only to the user. If it is created in SAP menu and if all the users are using the SAP menu then the folder would be visible to all...
Hope this clarifies your query...
Reward me points...
Regards
Prasanna -
Hi Experts,
When I login to solman system, I am not able to see the standard SAP Menu structure. It is happening for all the users in solman. In other systems, it is showing the SAP menu correctly. Is there any setting do I need to change and where the SAP Menu structures are saved. Could you please reply.
Thanks & Regards,
Sundara.>
Sundara82 wrote:
> In SSM2 the initial menu is set as AI_SOLAR. But when we login it is not showing the same menu as we see in ECC and CRM. It is different. We want to have the same menu as we see in all other systems. Where can we chenge it. Please suggest.
>
Hi Sundara,
Are you refering to the SAP Standard Menu with System, Help or you looking for the easy access menu in left navigation?
Which menu entries are you expecting?
Best regards,
Ruediger -
Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!
Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!
-
How to add a custom code to standard sap menu
Hello guru,
will you please explain me how to add a custom code to standard sap menu?
thanks in advance.
Best regards.
juanHello juan,
with SE43N you can add custom transaction codes to the existing menues.
see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
regards
johannes -
Can we include any custom T-Code in SAP Menu path
Hi,
Can we maintain any custom T-codes in the SAP Menu path in the SAP Menu displayed on the SAP EASY ACCESS.
Or can we maintain user Menu...?
If so how to create? and where?
If so please help me to maintain
Thanks in Advance,
Shalem.Hi Shalem
For adding custom T-Codes in SAP user menu, we have to extend the existing area menu <b>S000</b> via transaction <b>SE43N</b>.
The transaction is for Area Menu Maintenance.
Kind Regards
Eswar -
To Add Custom Tcode in SAP Menu
Hi ,
I want to edit the standard SAP menu in sap easy access screen and need to add one custom transaction.
Under the sap menu:
Logistics --> Sales and Distribution --> Shipping and Transportation > Post Goods Issue> Custom Tcode
Anyone please let me know,how to get this done.
Thanks in advance,
SavithaHi,
Creating your own SAP Customized Main Menu
You can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics. The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
Steps :-
Goto Transaction SE43 - Area Menu
Click the copy button. Copy from S000 to ZXXX
After copying, click Change (area menu ZXXX)
Double click on Logistics and add in your transaction code in the AreaMenu.
Remembers to Activate it.
Next Goto Transaction SU01 - Maintain users
Type in the user name and click the Defaults button
Type in the area menu (ZXXX) in the Start Menu field.
Click Save
The user will be able to see the additional transaction on the next logon.
Regards,
Nagaraj -
Travel & Expense screen shows SAP menu / toolbar
Hi,
Recently we are having an issue with T&E. The portal screen for T&E, displays Tcode TRIP screen.
( but without SAP menu and toolbar). But for some employees this has started to show menu/tool bar.
Is this some docking issue ? How to correct this
Regards
MonikandanHi,
Check the ITS Service you are using for the same. Default is webgui. Go to the t-code sicf and navigate to default_host/sap/bc/gui/sap/its/webgui(or your ITS service). Display the properties and then click on GUI Configuration. In edit mode, add the parameter ~NOHEADEROKCODE with value 1.
This will remove the menu toolbar from your transaction iview from portal
Thanks -
Attaching Customer area menu ( ZMENU ) to SAP menu
Hi all,
I have a Z area menu which has some Z transactions attached to it. This Z area menu must appear under HR in SAP menu. what is the procedure do this ?
Thanksif u want to add only this menu in sap menu then
goto su01
for u r user id, in defaults tab give u r area menu in start menu.
regards.
santhosh reddy -
Reg:report painter reports adding into sap menu
HI all,
HI all
How to add reports painter reports in sap menu.?
regards
JK RaoHi, Janardhan Rao & all other Readers of SAP Net work site,
Private nodes
Private nodes are no longer supported in the area menus and are
not taken into account during migration. As a replacement, the
favorites are available in the Easy Access.
Including of own report trees in the menu structure
In order to include your own area menus generated from the report
trees into the displayed menu, you can either include the menus
as enhancements in the SAP Menu or include them into the menu of
a role. To do this, read the documentation on Transactions SE43
and PFCG.
Client dependency of the report trees
If you have used different report trees for different clients,
you can carry out the migration several times in the
corresponding clients. As a result, you receive several
cross-client area menus.
Further information
Also read the Release information BC_46_REPTREEMIG2. You find
this information in every system under Help -> Release notes ->
Complete list from Rel. 4.0 -> Release notes as at 4.6A,
Component BC-FES-SEM, document "Change to area menus and report
trees".
If you have any query, you may reach me
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited,
Hyderabad. AP. India
Phone : +91 9848550024
Email : [email protected] -
FICO Transactions codes are not listed in standard SAP Menu
Hi experts,
While login on SAP client we couldn't see the Financial Accounting transaction codes in SAP Standard Menu.
But it appear in entering transaction code S000. How can we resolve this issue?
Regards,
Muhammed RiyasI think the screen has been customized for your specific retailing purpose..
You can see in your SAP menu,
It is showing "SAP Easy Access Retailing"
In normal GUI, we can see "SAP Easy Access"
Also try to click the "SAP Menu" (as shown Arrow). -
Get date AND time to show in the menu bar
What is that technique to get date AND time to show in the menu bar please?
Install iStat Menu
System Preferences -> iStat Menus -> Date & Time
\[X] Show Date & Time
Format .... \[Edit]
(*) Custom (drag tokens to build a custom format)
Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
I created: 9:35 PM Sat 1-Aug-2009
You can create anything you like in any order you like.
The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
But I think the Custom Drag & Drop section is the easiest to use.
However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary". -
Crystal Report menu-item not visible on SAP menu of client
SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay AudichHi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks. -
Runnning report from Sap menu screen
hi
my client is running loan management module. in some transaction when he presses a button on the sap menu ( something called cash flow) , SAP generates a table with all calculated values and stuff ( like a report ) . they want a different output format . how can i write a custom report that takes all the values from the transaction and gets executed when he presses the same button on the menu but with the format they want.
( they do not want to make this a standalone report)What sort of "report" does this transaction produce? Is it a list display(WRITE statements) or an ALV grid. If it is a list display, it would be possible to write a custom program, which SUBMITs the standard report, export the resulting list to memory, import that list into memory, and pick it apart and reformat to the way you want. This is all possible, but it should be a report program and produce a list display.
REgards,
RIch Heilman
Maybe you are looking for
-
PLEASE READ MY STORY AND HELP ME!
So here's my story: A few months after I got my iPhone 3G I noticed that it had developed the infamous plastic crack. I contacted the Apple store and they assured me that it would get replaced because it was a known defect. I live about an hour and a
-
I have a problem with retrieving values in tileview using href and no problems if I use a button. Here is the code which I use in both instances: getPrimaryModel().setLocation(((TiledViewRequestInvocationEvent)event).getTileNumber()); String reqno =
-
Height of the containers in split container
Hi, I'm trying to split the container into 3 containers i.e. cont1, cont2, cont3. code is as follows. Could anyone please help me how to set the height for the containers cont1, cont2, cont3. Thanks in advance. DATA: split_cont_ob TYPE REF TO cl_gu
-
Hi When I plug in my iphone to my macbook air it says the computer is not granted to take the iphone information. So I haven t been able to import the iphone information (like photos) to my laptop. This is the first time it happened to me, because la
-
"The Adobe Flash Player or an HTML5 supported..." warning
I'm embedding YouTube videos into my DPS folios and right before they load a warning pops up for a split second. It warns the user that they need Flash or HTML5 to view the content. Is there anyway for this to be disabled? It's causing some of my use