Roles tab not working in USER MANAGEMENT OF EP6 SP9

Hi
I have successfully installed WAS 6.4 SP9 with EP6 SP9, TREX, KMC. When I click on USERAdministration -> ROLES, Im getting an error in a Dialog box
"Internet Explorer cannot open the Internet Site http://<hostname>:<port>/irj/portal". Operation Aborted
I got the same error even after 3 times fresh installation. During installation process I didn't encountered any error.
Can anyone guide me in this.
thanks
raj

as already said this is a problem with Portal SP9. There is a problem with the iview.
You have two choices. Install a newer patch (patch 13).
Or go directly to the WebAS Java start page
http://
There you can logon to the UME Interface ( a link is provided at the startpage) and assign roles to users or groups.
The usermanagement is the same for portal and webas java so it should work - at least it did for me.
Tell me if it works.
Message was edited by: Dirk Jäckel

Similar Messages

Performance tab not working in Enterprise Manager for user with dba role

Database: 11g2
New to Oracle. Don't want share SYS user account among dbas. Tried to create user with dba role to perform all tasks.
1. Removed DBMS_JOB, DBMS_LOB, UTL_FILE, UTL_HTTP, UTL_SMTP, and UTL_TCP from PUBLIC
2. Created user dbauser1 with dba role
3. Log in as dbauser1 in Enterprise Manager
After click Performance tab, it just went straight to "Database Login" page. No error message.
Any suggestions or advice will be appreciated.
piaoma

Hi Gourav,
This is the wsdl url:
http://hostname:8000/sap/bc/srt/wsdl/bndg_E04711310A0E55F1A0E3005056B03D6F/wsdl11/allinone/ws_policy/document?sap-client=450
Kind Regards,
Richard

Database Studio 7.9.08.09 - Could not access to user management; Deleting old settings and reinstallation did not bring a change -- database studio deinstallation cannot be performed anymore

Hi Community,
for a few months I have been struggling with a SAP Max DB database Studio issue and finally, I had to give up the idea of being able to fix this on my own. I am desperately seeking for help and I hope that you may be able to give me a hint, advice or even a solution.
This is what happened:
I used to run Windows 7 on 32bit. I also had Database Studio installed - which was running fine then.
After a harware upgrade, I am running now Windows 7 on a 64 bit System. All my files from my local disk (C:\) have been restored and copied onto my new system.
I reinstalled Database Studio Version 7.9.08.09 onto my new System. But on the first try to start the program I received the error that said "Could not Access to user Management.See Window -> Show View-> Event Log Viewer for more Details."
However the Event Log Viewer was empty.
After searching the web for a solution, I followed the advice given in this community and deinstalled Database Studio and deleted the C.\Users\MyAccount\sdb folder manually.
I reinstalled Database Studio and started it as Administrator.
However, the error is still appearing.
And, what makes it even worse is : now I am not able to uninstall Database Studio anymore.
When I run SAP MaxDB Installation Manager and select the instance of database Studio to be uninstallled I am receiving the error:
"ERR: Unhandled Exception: Can't call method: "GenPackageList" on an undefined value at SDB/Install/Gui/Dialogs/SelectInstance.pm line 328"
Any advice is highly appreciated.
Thanks,
Agnieszka

Hello Yashwanth,
thank you for your quick Response.
Yes, I downloaded and installed the 64 bit Version of dbstudio.
I downloaded and ran the following .exe file: maxdb-studio-win-64bit-x86_64-7_9_08_09.exe
I am running the following Java-Version:
Java Plug-in 1.6.0_45
Using JRE version 1.6.0_45-b06 Java HotSpot(TM) Client VM
I myself am not a SAP customer. However, the Company I am working for is a SAP customer.
Can you explain in Detail, how to create a ticket with SAP?
Thanks,
Agnieszka

Another FPN Thread: Remote role assignment not working

Hi all,
We have successfully implemented FPN for use in our ESS and BW environment and we are experiencing very little problems with it. We now want to start implementing it for our eRecruitment and SRM systems (as producers). For some reason we are not able to use the Remote Role Assignement functionality.
We have set up trust for the systems and use SSO.
Connection test for the producer is successfull.
We can see the Producer content in the pcd on the consumer.
Server times are the same.
As far as I know I have correctly set permissions on producer and consumer.
Possible cause: We are in the process of upgrading our consumer Portal to NW 7.0 SPS15 and have encountered some problems. The system is partially upgraded, so some components are SP15 and some others are still SP13. This is currently under investigation by SAP. Can this be an issue as our producer portals all are still on SP13?
I hope to hear from you soon. Please ask if you need any screenshots. Thanks in advance.
Best regards,
Jan Laros

Hi Jan,
if remote role assignment not works, you can also use remote delta links. I only work with remote delta links because i have more options and a better performance.
If your connection works you can go to Content Administration ->Portal Content-> NetWeaver-Content-Producer. Hier you can see your remote system. Now you can copy the role and add it to your portal-content.
If you can not see the content make sure that you have the same user on both sides also check the premissions on the portal-content of your remote system. To test the connection it is easier to add Everyone group to the content of your remote system.
regards,
Sharam

Xmms not work as user

My xmms does not work as user, but works as root. I give permissions for users in devfsd.conf, but when I klick to play file it does not pick up the file. The file name does not appear in the window. With Mplayer is does the same. What is the problem?

her is my devfsd.conf:
# Richard Gooch <[email protected]> 17-FEB-2002
# Enable full compatibility mode for old device names. You may comment these
# out if you don't use the old device names. Make sure you know what you're
# doing!
REGISTER .* MKOLDCOMPAT
UNREGISTER .* RMOLDCOMPAT
# You may comment out the above and uncomment the following if you've
# configured your system to use the original "new" devfs names or the really
# new names
#REGISTER ^vc/ MKOLDCOMPAT
#UNREGISTER ^vc/ RMOLDCOMPAT
#REGISTER ^pty/ MKOLDCOMPAT
#UNREGISTER ^pty/ RMOLDCOMPAT
#REGISTER ^misc/ MKOLDCOMPAT
#UNREGISTER ^misc/ RMOLDCOMPAT
# You may comment these out if you don't use the original "new" names
REGISTER .* MKNEWCOMPAT
UNREGISTER .* RMNEWCOMPAT
# Enable module autoloading. You may comment this out if you don't use
# autoloading
LOOKUP .* MODLOAD
# Uncomment the following if you want to set the group to "tty" for the
# pseudo-tty devices. This is necessary so that mesg(1) can later be used to
# enable/disable talk requests and wall(1) messages.
#REGISTER ^pty/s.* PERMISSIONS -1.tty 0600
#REGISTER ^pts/.* PERMISSIONS -1.tty 0600
# Uncomment this if you want permissions to be saved and restored
# Do not do this for pseudo-terminal devices
#REGISTER ^pt[sy] IGNORE
#CREATE ^pt[sy] IGNORE
#CHANGE ^pt[sy] IGNORE
#DELETE ^pt[sy] IGNORE
#REGISTER .* COPY /dev-state/$devname $devpath
#CREATE .* COPY $devpath /dev-state/$devname
#CHANGE .* COPY $devpath /dev-state/$devname
#DELETE .* CFUNCTION GLOBAL unlink /dev-state/$devname
#RESTORE /dev-state
# Uncomment this if you want the old /dev/cdrom symlink
#REGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL mksymlink $devname cdrom
#UNREGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL unlink cdrom
REGISTER ^sound/.* PERMISSIONS root.sound 660
REGISTER ^snd/.* PERMISSIONS root.sound 660
# Uncomment this to let PAM manage devfs
#REGISTER .* CFUNCTION /lib/security/pam_console_apply_devfsd.so pam_console_apply_single $devpath
# Uncomment this to manage USB mouse
REGISTER ^input/mouse0$ CFUNCTION GLOBAL mksymlink $devname usbmouse
UNREGISTER ^input/mouse0$ CFUNCTION GLOBAL unlink usbmouse
REGISTER ^input/mice$ CFUNCTION GLOBAL mksymlink $devname usbmouse
UNREGISTER ^input/mice$ CFUNCTION GLOBAL unlink usbmouse
# If you have removable media and want to force media revalidation when looking
# up new or old compatibility names, uncomment the following lines
# SCSI NEWCOMPAT /dev/sd/* names
#LOOKUP ^(sd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1
# SCSI OLDCOMPAT /dev/sd?? names
#LOOKUP ^(sd[a-z]+)[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1
# IDE NEWCOMPAT /dev/ide/hd/* names
#LOOKUP ^(ide/hd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1
# IDE OLDCOMPAT /dev/hd?? names
#LOOKUP ^(hd[a-z])[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1

Default Dashboard not working after user login

Hi All,
We have one issue in 11.1.1.7.1 where PORTALPATH is not working for users. As a result, user lands on home page/recent page instead of the default dashboard after login.
I followed Doc ID 1576576.1 and Bug 17071629 - PORTALPATH SESSION VARIABLE IS INEFFECTIVE is reported. I applied patch 17071629 on top of 7.1. I have tried and verified that
·     The URL we are using to login is “http://machinename:9704/analytics/saw.dll?bieehome&startPage=1”
·         There is no Start Page set in user’s My Account other than Default.
·         In Answers, the PORTALPATH session variable fetches correct dashboard path.
·         I removed space in the dashboard name and tried with following path “/shared/Dashboard/_portal/PortalPathTest”. Also, assigned same default value to the session variable. I also tried “/Shared Folders/Dashboard/Dashboards/PortalPathTest” and “%2fshared%2fDashboard%2f_portal%2fPortalPathTest” but nothing works.
·         lsinventory shows the patch got applied successfully.
One thing to notice -
1.       Login url is: "http://machinename:9704/analytics/saw.dll?bieehome&startPage=1"
2.       After login, browser URL gets changed to "http://http://scoreboard-sit.wellsfargo.com:9704/analytics/saw.dll?bieehomemachinename:9704/analytics/saw.dll?bieehome" and shows Home Page instead of default dashboard.
3.       Now at this stage, if I append "&startPage=1" to the above step 2 URL in browser, it automatically navigates to correct default dashboard.
Also, This patch has fixed default dashboard in Act As. That means, If I act as a User, I land on correct default dashboard. But if same user actually logs in, s/he lands on home page.
I suspect if URL redirection after login is the actual issue. Please suggest if anyone has an idea.
Thanks,
Akshat

I think this was the issue -
There was a java script error related to an undefined object, "accessMode" in logon.js. This is related to Accessibility or Section 508 (checked by Developer Tools of IE). We may have removed this code from the logon page which was causing the error. We had customized the page quite a bit previously. When I ignore the error and step through, I go to the correct portal path page. So we are going to replace the logon.js file with backup and hopefully it will fix the issue.
Cheers!
Akshat

Getting Login error while working with User Management

Hi,
I am new to EBS and learning to work with 'User Management'.
I have EBS 11i installed on XP.
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.
Thanks in advance for any helpful hint.
Regards,
Sohail.

Hi,
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*Please mention the navigation path to reproduce the issue.
Also, please check Apache log files for any errors.
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.Please see (How to to Define an Application User That Has All The Priviledges in User Management Responsibility options As SYSADMIN User [ID 378262.1]).
Thanks,
Hussein

IE 11 - Open in new Tab Not Working

When I click on a link that should open in a new tab (or right-click and select Open in new Tab), IE11 Opens a new tab but the screen is blank, the URL is about:blank and the tab title is 'Blank Page'.
Windows 8.1 x64
Internet Explorer 11 (Desktop)
The 'Metro' version of IE 11 still works fine, it's just the Desktop version which is broken.
I've tried all the fixes listed in the similar thread, but none have helped.
IE 11 TABS NOT WORKING
IE 11 opens blank tab

Thanks, I ran a Command Prompt (Admin) and ran the following scripts:
ie8-rereg.32on64.cmd
ie8-rereg.64on64.cmd
Both seemed to execute correctly, but haven't made a difference.
Unfortunately they have never been a complete repair and now, due to security/obscurity have been made even less effective. There was an example in here a while ago in which the poster helped me see that exploiting the original manifests might have
been a better tack for a repair. IIRC they uncovered some registry corruption which seemed related to mshtmled.dll but which was not repaired by registering that module and was damage which was only hinted at by looking at the manifest.
The poster's repair was found by comparing registries from otherwise identical systems...
OMG look what this recollection has dredged up: <lol/>
http://social.technet.microsoft.com/Forums/ie/en-us/08f7a0f7-6f4b-4def-b399-12a0c281655a/ie9-wont-open-pages-just-give-a-new-tab-thats-blank?forum=ieitprocurrentver
Interestingly, I came across another oddity which might indicate the behaviour is some sort of change to the IE security settings. On a site I frequent http://www.makegamessa.com/ none of the links work.
They've all previously worked and they still work in other browsers, just not my IE. If you click a link it is supposed to open the page in the current window (i.e. not opening a new tab), but nothing happens. However, if I have the F12 developer tools open,
then the links all work as expected OR if I add the site to Trusted Sites the links also work.
That sounds like Active Scripting is inhibited. Scripting would be disabled in a Restricted security zone or in an Internet zone which was set to High level. Scripting would be enabled in a Trusted security zone. Scripting would be required
in order to use IE11 Developer Tools since that is its implementation. It hadn't occurred to me that that might provide an override for Scripting which had been otherwise inhibited.
FYI
Robert Aldwinckle

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Print Screen not working for user but working for Administrator

Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
09-14-2009 11:25 AM
Hi I am new to this forum and am asking for your help. We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users. We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work. I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution . Thanks in Advance .

Jerry, that post you just answered was from nearly 4 1/2 years ago! And that's the last time the OP was here.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Role based data visibility is not working in Round manager

I am looking for role based data visibility in Syclo round manager application where technician will see the data which is assigned to his name only (not all the data) I have created one custom role in SAP system and it's working fine .It's showing the below message :
Now I want to implement the same in syclo round manager .So I went to the SAP configuration panel and set the same user role on the security setting in class handler .Z_SYCLO_RM_ROLE is the custom role which I mentioned earlier .I tried with different option in this tab but it's not working .
Please let me know if I missed something to mention or is there any other process I need to follow .
Tags edited by: Michael Appleby

is not working Insufficient information. In what way is it "not working"? The page doesn't render as required? There's an error message? The browser crashes? The server room has been trampled into dust by a herd of buffalo?
>
I am unable to make it as page form / report.
v1 := v1 || ' ' ||'<input inline type =submit style="color:BLUE;background-color:RED" value='||c2.plot_id||'>';
...It is not possible to generate form elements in an APEX page in this way. The [APEX_ITEM API|http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_item.htm#CACEEEJE] is the only way to create APEX items in PL/SQL. However it contains no procedures to generate button items, so an alternative design is required in this case, e.g. a report with links.
(Also what is the intention of "inline" in the above code? [There is no *inline* attribute|http://www.w3.org/TR/1999/REC-html401-19991224/interact/forms.html#h-17.4].)

Dimension security is not working if user have two roles in SSAS while connecting from Excel

Hello Genius,
I am facing the issue when user trying to connect the cube from excel if user have more than one role in ssas db.
Role 1: Countryuser, I have implemented the dimension security with country
dimension and countrycode attribute.
Role 2: CityUser, I have implemented the dimension security with
city dimension and citycode attribute.
If user is mapped to any one of above role dimension security is working perfectly according to the logic but mapped to both role, cube is exposing all the data in this case dimension security is not working.
Please give me the solution to fix this issue or incase I am wrong kindly advice.
Thanks
Ganesh

This is the expected behaviour as allowed sets in roles are unioned together.
This is not a problem when your roles are restricting across a single attribute.
eg.
US_role = {[Geography].[Country].[USA]
France_role = {[Geography].[Country].[France] }
as someone in both roles ends up seeing {[Geography].[Country].[USA], [Geography].[Country].[France] }
But when you have different attributes:
NY_role = {[Geography].[City].[New York] }
France_role = {[Geography].[Country].[France] }
The first role is unrestricted on countries and the second is unrestriced on cities which is effectively:
NY_role = {[Geography].[Country].AllMembers , [Geography].[City].[New York] }
France_role = {[Geography].[Country].[France], [Geography].[City].AllMembers }
And when you union those two sets together you end up with:
{[Geography].[Country].AllMembers , [Geography].[City].AllMembers }
Which means that someone in both roles can see everything.
So if you want to restrict someone to City = New York and Country = France you have to create a
single role where both attributes are restricted. So if you have a lot of these combinations you will either have to create a lot of "combination" roles or look at dynamic security.
The other thing that might work is make sure that you only give some users access to certain cities and others access to certain countries. It's the mixing of the two for a single person that causes the issues.
http://darren.gosbell.com - please mark correct answers

SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?

In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
SQL> grant execute on DBMS_METADATA to XXXXX;
SQL> grant select_catalog_role to XXXXX;
So, my questions are:
1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
2) What security implications are there for issueing the above grants to PUBLIC?
NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
Edited by: user615070 on Nov 19, 2009 9:30 AM
Edited by: user615070 on Nov 19, 2009 10:06 AM

An OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
I hope you understand.

Row Level Security - Data filter - Roles Variable Not working in OBIEE 11.1.1.7.1

Hi all,
Previously, we were using OBIEE 11.1.1.5.0 and we were able to assign users to application roles by using the initialization block to assign the ROLES session variables.
1. My USER_SECURITY table in Oracle database:
USER_NAME | USER_ID | ROL
user1       | 1723    | GobalDataRole
user2       | 1739    | GobalDataRole
user3      | 1743    | GobalDataRole
2. The SQL query in my session initialization block:
select USER_NAME, USER_ID, ROL
from USER_SECURITY
where USERNAME = ':USER'
3. The row-wise initialization option is not checked.
4. In the Oracle Enterprise Manager Fusion Middleware Control, we created new application role: GobalDataRole and sync with rpd.
5. The GobalDataRole is used in the RPD to filter the data under permissions --> data filter. GobalDataRole only has access to Country A data.
6. Result: under my account, also in rpd Manage --> Sessions, user variable details
User_name , user_id & Rol variable is working fine as expected,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
User1, User2, and User3 are able to see the data correctly according the their data access setup.
Now, we using OBIEE 11.1.1.7.1 and using the same method, but we not able to assign users to application roles by using the initialization block to assign the ROLES session variables anymore.
Result:
User_name & user_id variable is working fine as expected, but the ROl variaible is not capturing the DB value,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
User1, User2, and User3 can see all data (which is wrong) because they are not assigned to the correct application role that sets the data restriction/filter.
Has anyone encountered the same issue? Any advice on how to solve this?
Thanks in advance!
Satheeshkumar P

Thanks user10615659   ,
- Yes the variable ROLES available in OBIEE 11.1.1.7.1
- Tested the init block and variables in offline rpd its working as expected.
- In online rpd, except ROLES and GROUP variable remaining variables working fine.
- Verified log file in both online and offline init block testing - the init block execution is successful.
Thanks

FPN - error trying to lookup object - remote role assignment not working

Hello everyone,
We have implemented a Federated Portal Network connection in our landscape between our portals.
We use only remote role assignment functionality.
Everything was working fine, but since 2 days we encounter the following error in the Default trace.
Error trying to lookup object: alias: <role name>
It is possible to open the producer portal in the Portal Content Administration and also searching for the Producer portal roles is possible in User administration. But when we assign the remote role the tab is not displayed in the portal only the above mentioned error is shown in the default trace. Our portals run SP 12 and BI Java SP14.
Is there a solution or workaround for this issue ?
Martin

Hi,
I have the same issue as you, I cannot see role tabs in Consumer portal and I get the same error in the defaulttrace as you.
What did you do to resolve this issue?
Many thanks
Gordon

Roles tab not working in USER MANAGEMENT OF EP6 SP9

Similar Messages

Maybe you are looking for