Roll Forward consistent-closed database copy, that hasn't been opened yet

Hi Oracle DBAs,
I was told that it is possible to do this;
1. Shutdown the database
2. copy accross to another server
3. mount the database
4. roll forward the database if there had been some archived redo logs generated after the original database had been started up.
Please if you can provide the command(s) to do that...
Thanks,
Marc.

Aman,
thanks for the notes on using the RMAN Duplicate commands, ultimately, we will be going down that path to use RMAN, and the notes will be the first place I look at to start.
Cheers,
Marc.

Similar Messages

Anybody Pre-Order that hasn't been charged yet?

I Successfully pre-ordered on the 15th and received e-mail confirmation of delivery by the 24th, but I haven't been charged yet. Everything looks ok in the order status but I've read a lot of people saying that they've already been charged, should I be concerned?

I ordered two at about 4:30 Eastern on the 15th. My first went through fine and is pending on my credit card, but between the first and second AT&T put 3 $1 holds on my account, which caused the fraud department to shut my card off. The order went through, but I got a call from my card that said they declined the charged. I looked today and it said my first order was on the 15th and the second was on the 16th. So after several attempts to get through to AT&T Premier, thinking I was gonna get it on launch day, they said that the time stamp was the 15th when I originally placed it, so I'll get it on the 24th. My advice is to call and make sure that the order is actually placed, because this whole thing is a huge mess.

How can I Request a new App. that hasn't been made yet?

I'm in a car club with many car enthusiasts that use there iPads, iPhones, and iPods on their cars. This is done by using a car programmer that can link with Apple devices by Bluetooth. These programmers are designed to unlock your vehicles hidden performance potential by wirelessly re-calibrating your vehicle's computer for maximum horsepower and torque, increased throttle response, firmer shifts and even increased fuel mileage. They are the first and only made for iPod, iPhone or iPad vehicle tuner and OBDII monitoring product on the market. The programmers include a wireless interface that plugs directly into your vehicles OBDII diagnostic connector and communicates with your Apple device via a secure Bluetooth wireless connection. By optimizing your vehicle's fuel and spark curves, they will make your vehicle run more efficiently, increasing MPG, and performance you can feel in the driver seat! Features include: On screen virtual gauges with adjustable warning/alert lights., Monitor vehicle engine data/parameters via virtual gauges., User selectable gauge themes and gauge layouts., Monitor multiple engine parameters in real time., Diagnose your vehicle's DTC codes ., 0-60 MPH test., 1/8 mile and 1/4 mile test., Top speed test., Braking test.
These car enthusiasts have very rear cars, expensive cars, or both and don't want to mount or hold the Apple devices while driving at high speeds but at the same want to see the information on the Apple devices. Most of these enthusiasts and I set the devices on the dashes of our cars. This is when I noticed the reflection on the windshield. There are car brand that offer an option that has been know as H.U.D. ( Heads Up Display ).
I was wondering if there is or if it was possible to make an App. that could mirror the display on the Apple devices? So when the display reflects off the windshield it will not be backwards. This will be a much safer way for the driver to be more aware of every thing going on around him/her while driving. This will optimize the drivers alertness and minimize the times the drive would look away from the road to see his/her gauges.
Products used together:
Mac mini
iPad 3
iPhone 4s
SCT Performance iTSX Wireless Tuner
2007 Ford Mustang GT 800hp+ ( With twin turbo and many more up grades)

If you find a somewhat similar app, go to the developer's web page and send your request.
 Cheers, Tom

This is a question that hasn't been answered yet

IPhone 5c
I have just received my new phone yesterday,
i chose the latest back up and waited for it all it restore.
It finally did it but not all photos were there.. I've heard that
it erases them out of photo stream after 30 days but these
we're my holiday photos from 3 week ago. It said that
i needed more storage to finish the back up so I thought
it might have something to do with that so I bought some
more. It backed up another time from an earlier date but
still no recent pictures. It's weird because it's backed up
some photos from the holiday but missed out a lot of
photos before the ones that have backed up But also
missed a lot after the ones that have backed up from
the holiday. Please help me get all my pictures back!!

Hi,
Is there any way of accessing this?If it wasnt shared then no one car run it.
Maybe using Oracle Discoverer Administrator?Yes, you can use the administrator and log in as the EUL owner, then you can export the workbook into eex file and import it again but with the "change ownership" flag on.
Alternately you can open the user, share the report and close it again.
another option is to go to a cloned environment alter this user, use the user (in the cloned env) to login into discoverer desktop,
then you can save the report as DIS file.
once you saved the report locally you can login as yourself to the production and run the report from the local path. after it is opened you can save it to the DB.
Tamir

HT4972 I have a new computer and a old iphone 4 that hasn't been updated in a long time. I logged into itunes on my new computer and plugged in my phone and there is no option to sync. ;( suggestions?

I have a new computer and a old iphone 4 that hasn't been updated in a long time. I logged into itunes on my new computer and plugged in my phone and there is no option to sync. ;( suggestions?

The ipod is not a backup device. The music sync is one way - computer to ipod. the exception is itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your old computer, or your backup copy of your old comptuer, to your new one.

I have an ipod touch that hasn't been used for a while. Now we want to use it, but the screen says "ipod is disabled connect to itunes"--but it won't connect. I have tried to place in recovery mode with directions given but still get the same message.

I have an ipod touch that hasn't been used in a while. We want to use it now, but the screen says "ipod disabled. connect to itunes". When I connect to itunes it tells me to enter my passcode, however the ipod will not allow me to do anything (and I don't know the code anyway). I tried to put it in recovery mode as someone suggested by holding the home button while plugging the ipod up from the computer, but I never did get the "connect to itunes" symbol, I continually got the same screen saying "ipod disabled connect to itunes". Help!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I got a new Kobe and i am unable to register it on Adobe, when I log in to my account I receive the following error message "you can only authorize this computer with an Adobe ID that hasn't been previously used to authorize any other computer or mobile d

I got a new Kobo and tried to register it so that I can download books from the public library. When I tried to register my device I received the following message " You can only authorize this computer with an Adobe ID that hasn't been previously used to authorize any other computer or mobile devices. Please try again.

Please refer to Can't authorize with a previously used Adobe ID

How to solve this error 'This package is using an app name that hasn't been reserved for this app: "Matest"

i already reserved app name as Ma_Test. But only one error showing "This package is using an app name that hasn't been reserved for this app: "Matest". how to solve?

Hello,
You need to make sure both names match exactly

HT5622 How do you get rid of an old Apple ID that hasn't been used in a while in which you no longer remember the password and the email account no longer exists?

How do you get rid of an old Apple ID that hasn't been used in a while in which you no longer remember the password and the email account it's tied to no longer exists?

The password will not be sent to you, because Apple does not know it. They will send a link where you can reset the password. It will be sent to your Rescue email address, not the iCloud email address. If you don't have one contact Apple Account Security and they can reset it for you: http://support.apple.com/kb/HT5699

Has anybody successfully logged an online support request for an itunes card that hasn't been activated properly?

Has anybody successfully logged an online support request for an itunes card that hasn't been activated properly? I tried the camera to read it but still no good. Get the error about it not being activated properly so i tried to log an online support ticket twice on two seperate days but get another error saying sorry we can't process this request now try later. Very frustrated, my son has a $20 voucher from Christmas he can' t use.

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of issue

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

How do I verify that a product code hasn't been used yet?

How do I verify that a product code hasn't been used yet?

By yourself? Only by attempting to register it yourself in your name.
Maybe Adobe customer can help you if you call them.
These are user to user forums.

I have install adobe digital on my coputer without an adobe ID. I want to change as I now have an ID but i get this notice "You can oly authorize this computer with a adobe ID that hasn't been previously used to authorize any other computer or mobile dev

I have installed adobe digital on my computer without an adobe ID. I want to change as I not have an ID but I get this notice: "You can only authorize this computer with an adobe ID that hasn't been previously used to authorize any other computer or mobile device. What do I have to do?

Perhaps someone in the Adobe Digital Editions forum? (Adobe Reader has no connection, we don't have much of a clue). Adobe Digital Editions

You can only authorize this computer with an Adobe id that hasn't been previously used to authorize any other computer or mobile device

When I try to download a library book on my Kobo reader, I keep getting this message. First it tells me to change the computer's authorization to be associated with an Adobe ID. When I click on authorize after logging in, the message keeps telling my "you can only authorize this computer with an Adobe ID that hasn't been previously used to authorize any other computer or mobile device. I have no idea what this means. Help!

Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0

How to make a query to list out Journal voucher that hasn't been posted

Hi, do you know how to make a query to list out Journal voucher that hasn't been posted?
By what code name identify that?
Thanks.
Raymond
Edited by: Rui Pereira on Aug 6, 2008 3:57 PM

jack,
there is no link with OBTD to OJDT and JDT1.
voucher number in obdt is different,
after posting voucher is saved as journal entry seperate
number is generated.
you can link OACT,OCRD WITH OJDT,JDT1.
Jeyakanthan

Roll Forward consistent-closed database copy, that hasn't been opened yet

Similar Messages

Maybe you are looking for