Roll in and Roll out action in sm50

I am getting roll in roll out action in sm50 tcode because of this server getting slow please help me out to slove this proble.
Thanx
Kvl

hii
this seems to be a problem with extended memory(em/initial_size_MB),you will need to increase this
The value of the extended memory pool size should be big enough to contain all user contexts.The rule of thumb is that the extended memory should be larger than the limit specifid by ztta/roll_extension parameter.SAP recommend this to be 10-15 times larger than ztta/roll_extension parameter.
increase its(em/initial_size_MB) value and you will see a improve in the performance
Rohit

Similar Messages

Very Urgent (How can i add fade in and fade out Action)

Hi, How can i add fade in and fade out action on the JButton when the mouse is over the button.its mean that when the mouse is over the button then the button's Label is fade in and out.
plz give code example
thanks

If you want to fade in and out anything, you should look at the Composite interface. A Composite is part of a Graphics2D object. You should be able to gradually change this on the button, but maybe within a different thread?

Everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8

everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8

Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling

Roll in and roll out

hai
      what is rollin and rollout ?
      what is saint update?

Hi,
When users request for connection to the sap server, all the requests are put in a queue by the dispatcher. When the dispatcher finds a free workprocess, the user request is assigned to that work process on FIFO basis. Data input provided by the user are transfered to the memory area of the workprocess. The work process communicates with the database as per the requirement of the user querry and picks data from the database into its memory area and inturn returns it to the user.
    When the user terminates the connection the work process attached to it flushes its memory area and becomes free again to be assigned to another user request. This flow of data into the memory of the workprocess and flushing of data from the memory of the work process is known as roll-in and roll-out.We can say the rollin takes place at the begining of a user request and rollout takes place on termination of the same.
SAINT update:
saint update means applying a patch to enhance the functions of saint. This becomes necessary to accomodate the newer attributes of the new add-on support packages. Saint is mainly used for add-on tools.
Hope this clarifies your querry.
Pls dont forget to award points if solved.
Regards

Versioning and parallel development streams for worldwide SAP roll-out

Hi SDN folks,
My customer is in the process of a worldwide roll-out of SAP. They have a transport environment for ECC that looks like this:
D -
>    QA -
> R   -
>   P
We have SAP Charm installed and running in solution manager - to manage the creation of transports in the D system.
The problem we are facing is how to manage parallel development changes and configuration changes.
For example - if we have developers working on a change that is in test in the QA environment - and we hit a production emergency in P - we then need to make an emergency change to the P version (which would only be available in P and R) - and transport this change through to P - in the process - overwriting the changes that our developers are working on in the D and QA environments.
We also have the issue of objects for multiple countries being developed and configured in parallel - and so there will be version conflicts up the to the QA system as well.
Is there any kind of solution for the management of parallel development streams - and versioning - for all custom code / development objects and for configuration changes(other than introducing a second development system)?
Is there any kind of 3rd party product for SAP that helps to solve this issue?
Currently we are considering development freezes, manually renaming objects with versioning identifiers (will only work for some objects), manual backups of versions. - none of these seem to be a tidy universal solution, is there one?
Any help / directions you can offer will be appreciated,
many thanks,
Julian

Hi Julian,
Thanks for the clarification!
Managing production support and new development after go live is always a challenge. It can be addressed in many ways, but it is most important to create a set of rules and stick to the procedure. If you do not want a "second" landscape, you are going to have objects "overwritten" in the D and Q systems when you need to make a production fix -- as you must revert the object in D to the P version to make the fix. Even with a second landscape, objects will have to be merged somehow when a fix is promoted to production.
As I said above, what you can do is have your developers save their current development in released transports before making the production fix. This saves a version that must be merged with the fix, anyway. That is:
Object A is the produciton version and must be fixed.
Object A' is the current development version (unfinished) and is saved into a released transport request.
In D, Object A' is reverted to the A version and corrected for the production error, creating object A'' that is promoted to production.
Object A' and A'' are manually "merged" into A''' as the new current development version.
Yes, objects are overwritten with this method. However, you can always retrieve what has been overwritten since it has been saved in a released transport.
Another option is to bypass Q for production fixes. I.e. D -> R -> P. However, this invalidates the objects in Q until the merged version is created in D and transported to Q.
In any method you choose to do this -- dual development landscapes or not -- discipline and managment are a must.
Best Regards,
Matt

Stop and fade out a rolling title

How can you stop and fade out a rolling title, if at all?
Thank you.
Pal

Here's an alternative approach - it's great to have alternatives! I believe that to "stop and fade out a rolling title" is what the Roll/Crawl Options box is all about. Here's what I do:
Create a Default Roll Title.
In Roll/Crawl Options click on Start Off Screen (Preroll will disable) and enter the following values: Ease-In: 0, Ease-Out: 50 and Postroll: 100
Leave End Off Screen unticked
Make a few space lines before and after whatever it is you want to have stay on the screen at the end so that it fits in the middle. In my case that's usually ME! :-)
Your titles (as long as you like) will start off screen and then they will roll and roll until that last block appears and slows down - the Ease-Out value. That will stay on the screen for the Postroll value duration. Usually I have a normal disolve transition to do the fadeout. All done in just a few mouse clicks.
(The above values are what I use 99% of the time but you might wish to experiment.)

Difference between roll out and implementation

Dear sapians,
What is the major difference between roll out and ene to end implementation ?
Is it possible to rollout to N no of plants?
Gururajan .A

The most important thing to do if you are planning to carry out an implementation followed by several roll-outs, is to do the analysis of the business processes across all potential future sites and not just try to use one central example.
In one implementation I joined they had used a small site as the blueprint because this site was easier to manage and it used most of the areas of SAP. But when it came to rolling out the solution, the first few roll outs went well (because the sites were of a similar size to the original site), but then when a major site was to be rolled out to there were MAJOR problems. In the small initial site some users were carrying out many roles / tasks, but in the large site that we were rolling out to there were several users to each role / task and this meant a redesign of most of the processes and different configuration.
So design for as many sites as you can and then you can roll out, don't just do the design for the initial sites then try to roll out.
Steve B

US based implementation roll out for France and India

We have a U.S. based implementation that is rolling out to France and India , and we have the U.S. chart of accounts set as the leading ledger. I knew France and India has their own country reporting format. Is it OK to just have country chart of account without activating the non- leading ledger? What needs to be considered for this country roll out .
Thanks
Gobi

Hi Arvind
I have same requirement for India roll out implementation ; If you have implemented non leading ledger then share your experience
Thanks
Prem

Roll out of PC suite with SMS 3.0

Hello,
Our company wants to roll out Nokia PC Suite 6.82.22 thru SMS 3.0.
When we do that the ContentCopier backup is placed in the Default User profile. Rebooting or logging in as another user after install doesn't change that.
When we install the MSI by hand it is placed in the current user profile. When we log in as another user and make a backup it is placed in that users profile (as it should).
I didn't find any properties or custom actions in the MSI and no registry keys or .ini files I could change to change the behaviour of the SMS installation.
I understand the Default User profile is taken because the SMS installation user has no profile but I don't understand why this isn't corrected after a reboot/logon.
Do you have a solution for us? Installation by hand isn't an option anymore after this migration.
Kind regards,
Marcel Bruinsma

Thanks for your reply.
Not yet but before I start spending a lot of time on that I would like a Nokia rep. to tell me if they know about this and if they have a solution.
I can try to repackage the vendor MSI but somehow I don't think this will solve my problem.
I also mailed the message to the Dutch help desk but no sign of life from there until now.Message Edited by zhubajie on 19-Sep-200701:49 PM

Will current HD DVRs have ext. drive capability when 1.9 rolls out or ONLY the new 500 GB DVR box?

Got the email about the $40 upgrade to the 500 GB Motorola box. I realize that once 1.9 is FINALLY rolled out, the box will have eSATA capability to tack on a supplemental HD. My question is, can I just not pay their $40 for the new box and instead wait until 1.9 is rolled out, and then be able to use the currently useless USB port on my current silver Motorola 160 GB HD box to hook up a 1TB drive that I can get for less than the $40 upgrade fee?
Are they are any OTHER advantages to the new box over the existing ones (feature and capability wise...I don't care about recycled materials, less energy usage, etc)?

All the 7xxx series DVRs will support an external drive. There are no plans to utilize the USB port - too slow to support MRDVR.
The 7232 has more memory (not just the disk) and is smaller, black, and supposed to use less energy (I know you said you don't care, but I mention it anyway).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Rolling out ADE to Open Access Computers in libraries

(In the UK). In Plymouth we are using Secure Electronic Delivery as the default to deliver access to documents provided by the British Library. Internet Explorer 7 (and this is also known with Firefox and other browsers) causes an ebook reader detection error as part of the downloading process "Downloading this eBook requires Adobe Acrobat eBook Reader version 2.2 or later to be installed on your computer" (even though all our computers are on Reader 7.0.9). The page then provides a link to download the latest version. The problem is that, despite being told to ignore the link and scroll to the 'download your ebooks' link further down the screen, many users are clicking the update link and ending up with Adobe Reader 8 without ADE, or a misfunctioning ADE because they do not have administrator rights, or a screen which hangs and does nothing, or an ADE that will not allow them to print. In open access areas all computers are locked to a standard 'frozen' image which is restored after each log-out. Users, therefore, are unable to save any changes which means that they also have to repeat the steps every time they want to download an SED everytime they log-in. (Yes, because of 'easy activation', we also have to make it clear to these users that it is 'download and then print' or there is no further access to the document, despite a 14day access rule; and no-use of memory sticks too!). We would love to be able to maintain our ability to standardise these computers on the latest version of the Reader software, but are unable to do so because we do not have the manpower to manually install ADE on each computer (over 2,500!) to make it part of the 'locked' image. We know the eBook Reader detection error is most probably caused by the underlying software technology difference between IE7 and Adobe 7 and would hope that installing Adobe Reader 8 and ADE would restore the seamless process that we had long established using the Reader 7 series!
Could not Adobe please consider a means by which, say ADE 1.5, could be packaged and rolled-out centrally? Then also consider doing the same for future releases - it would really make life easier for everyone. If not we will have to remain on Reader 7.0.9 and users will 'suffer' as the technology becomes more and more obsolete, and suffers from more and more problems caused by a widening gap in software technologies. We understand the idea behind the decision to make ADE an IRA (internet rich application) but the growing use of DRM and the need to delivery these documents within closed environments, to people who cannot be given full access permissions, means that there should also be a concurrent method to allow updating in such situations. Our 'problem' rate for SED is beginning to climb (from under 3% (based on 16,000 transactions) before the release of Adobe 8, to 6% afterwards (based on 7,000 transactions). Before the release of 8, 70% of the problems were because people didn't read instructions we provided; after 8's release, 70% of the problems are caused by the technologies (eBook detection; downloading Reader 8 and not ADE; ADE not functioning due to local permissions etc etc). These seriously affect the value of the service and also the perception people have of the service and of Adobe products (eg: the IE7 error states "Adobe eBook Reader not detected" so, even though your product may not be to blame for the users' inability to get to their document, they blame Adobe Reader, especially if they know they have Reader 7 installed!
My apologies for a long post but I consider it an important issue as well as it being important to lay out some of the logic and arguement as to why.
Graham

Thank you very much for taking the time to write this long and accurate post. We are very much aware of this issue and are working as hard as we can to resolve this. It might not be possible to squeeze it into 1.5, but we will get to it as soon as we possibly can.
Can you submit a support incident at www.adobe.com/support/digitaleditions/ so we can try and resolve the immediate problem (incorrect detection and misleading message)? We can also discuss offline how your organization and our can work together to resolve the larger problem. Thanks.

BlackBerry 10.2 OS Begins Roll Out for the Z10

Read more here:
BlackBerry 10.2 OS Begins Roll Out
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BlackBerry 10.2 OS Begins Roll Out for the Q5

Read more here:
BlackBerry 10.2 OS Begins Roll Out
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BlackBerry 10.2 OS Begins Roll Out, for the Q10

Read more here:
BlackBerry 10.2 OS Begins Roll Out
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BlackBerry 10.2 OS Begins Roll Out

BlackBerry 10.2 OS Begins Roll Out — New Reasons to Love your BlackBerry 10 Smartphone, Big and Smal
From the Inside BlackBerry blog:
BlackBerry 10.2 OS introduces new features like BlackBerry Priority Hub, BlackBerry Natural Sound, and BBM now in any app that will help you be more productive and stay better connected when it counts. Plus, with hundreds of new refinements, BlackBerry 10.2 makes the things you do every day faster and easier. Here are just some of the new features you’re going to love in BlackBerry 10.2:
BlackBerry 10.2 Highlights:
Priority Hub
Keep your important conversations closer than ever with the new Priority Hub. Always at your fingertips, Priority Hub learns what conversations are most important to you and automatically puts those messages at the top of your inbox, helping you to stay focused on the critical items. On top of that, the new attachment view helps you organize files and documents across your messaging accounts and within specific message threads.
BBM Video with Natural Sound
BBM Video has always allowed you to have a live face-to-face conversation with anyone, anywhere. Now, with Natural Sound, BBM Video and Voice conversations between BlackBerry 10 smartphones sound more natural and realistic. It’s the next best thing to being in the same room. We’re able to accomplish this because BlackBerry Natural Sound captures a wider sound spectrum, so you can hear subtle nuances that are lost in most cellular calls.
Instant Previews of BBM, SMS and Email from any app
Stay in the flow. BBM, SMS and E-mail messages now find you no matter what you are doing on your BlackBerry. See email, BBM and SMS message previews appear in any app – you can even respond to your BBM or SMS messages in any app or go to the BlackBerry Hub with a single swipe to respond to your email. Perfect for keeping the conversation going while you browse the web, watch a video, or use other apps. Of course, you can tailor these notifications to the way you work to ensure you’re only notified as much as you want to be.
BlackBerry Keyboard
The smartphone keyboard that knows your next move just got even smarter. With personalized next word suggestion, auto-correction, and the distinctive BlackBerry keyboard layout, we’ve built this keyboard to help you have conversations with speed and accuracy. And on the BlackBerry Z10 and BlackBerry Z30, improved audio feedback with distinct tones for specific keys like backspace, and shift helps you type more confidently because you’ll have more reassurance you’ve hit the right key.
Copy and Paste Enhancements
Copy and paste just got easier. Not only does BlackBerry 10.2 offer more precise cursor control, text selection is now easier. Once you select text, a pop up menu gives you editing options and direct sharing with BBM, Facebook and Twitter – so you can quickly copy, paste and share
Faster, Easier Sharing
BlackBerry 10.2 learns how you share and who you share with, helping you reduce the number of steps and amount of time it takes to get your files, photos, or documents to where they need to go. Touching “share” in any app provides suggestions on who and how to share your files based on how you’ve shared in the past, and the feature only gets smarter the more you use it.
Lock Screen Notifications
When the red light on your BlackBerry 10 smartphone is flashing, you don’t have to unlock the phone to see your message. Notifications on the lock screen now let you take a peek at the latest email, text, BBM, or notification to see if that’s the message you’ve been waiting for or one that can wait a while. You can customize which accounts appear on the lock screen and scroll over the icons to display the sender and subject line.
Reply Now
Reply Now lets you respond to incoming phone calls, even when it’s not a good time to answer the phone. Easily send a response through BBM, SMS or email – choose from a list of standard automated responses or respond with a personalized note. Perfect for ensuring that important contacts are always given your attention.
Calendar Enhancements
BlackBerry Calendar now comes with an ‘I’m running late’ function so you can instantly let meeting participants know if you’ll be late. You can even specify a new time in your notification. And, with a redesigned interface that makes adding an event easier, managing your time is simple.
BlackBerry 10.2 OS gives you a lot of new reasons to love your BlackBerry 10 smartphone, and we haven’t even mentioned the updates to Docs to Go, a new BlackBerry Hub icon, camera enhancements—but the best way to experience all BlackBerry 10.2 has to offer is to try it for yourself. Remember to back up before updating
BlackBerry OS 10.2 is expected to start rolling out in the following regions pending carrier availability:
Africa: Starting this week
Asia Pacific: Starting this week
Canada: Starting this week
Europe: Starting this week
Latin America: Starting in November
Middle East: Starting this week
US: Starting this winter
How to update to BlackBerry v10.2
When the update becomes available on your carrier, here’s how you can update for free:
To update your BlackBerry smartphone to BlackBerry 10.2 software, look for the alert in the notifications section of the BlackBerry Hub. You can also check for software updates through the System Settings menu and selecting Software Updates. The download will happen in the background, so your information remains safe and you can continue to use your smartphone as it downloads. As always, we recommend you make a current backup of your BlackBerry 10 smartphone. For more information on how to update your BlackBerry 10 smartphone, visit http://www.blackberry.com/update
Be sure to let us know what you think in the comments below.
*Not all carriers will be releasing this update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Roll in and Roll out action in sm50

Similar Messages

Maybe you are looking for