Roll over a small photo and above it (or beside) the large photo is displayed

Hi All
What is this called: When you roll over a small photo and
above it (or beside) the large version of the photo is displayed. I
would like to create a photo gallery that works this way. Could
someone tell me what this is called? Or better yet, where I can
learn how to do this? A free tutorial perhaps?

c2design,
> What is this called: When you roll over a small photo
> and above it (or beside) the large version of the photo
> is displayed.
I don't know that the phenomenon has one ultimately correct
name. I
might call that a "click to enlarge" or "rollover to enlarge"
effect.
> I would like to create a photo gallery that works this
> way. Could someone tell me what this is called? Or
> better yet, where I can learn how to do this? A free
> tutorial perhaps?
Flash generally provides many ways to accomplish a desired
task. One of
the easiest ways I can think of to get what you're after is
to create a
button symbol. Put your small image (the "thumbnail," it's
usually called)
into the button's Up frame. Put the large image in the
button's Over (and
perhaps Down) frame. In the Hit frame, put a shape that
represents where
you want someone to roll over in order for the Over frame to
show.
Typically, you'd just put the thumbnail into the Hit frame at
the same
horizontal and vertical position it was in the Up frame.
You could also program this effect with ActionScript, but
since you
posted in the general forum, let's see what you make of the
button approach.
Write back if you still have questions. :)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Similar Messages

  • Hi, just started on photoshop 13. When i import a photo and open layers, next to the imported photo is an icon  indicating the  layer is partially locked. When i try to unlock  the image, the editing part of the screen disappears and is replaced by a tran

    Hi, just started on photoshop 13. When i import a photo and open layers, next to the imported photo is an icon  indicating the  layer is partially locked. When i try to unlock  the image, the editing part of the screen disappears and is replaced by a transparency. What am i doing wrong

    Good day!
    Just to make sure: You are talking about Photoshop 13 aka Photoshop CS6?
    Regards,
    Pfaffenbichler

  • TS5192 After updating with 4.09 my photos which I store on an external hard drive will load into Aperture for 15 or so photos and then I just get the same photo repeating despite clicking on a different one in the group.  I have to stop working and come b

    After installing the 4.09 fix to process RAW from Sony RX100 (after updating to 3.5.1), photos do not continue to load into Aperture from the external hard drive where they are referenced.  The same photo is stuck in the adjustments frame to be worked on and the photos will not advance, no matter what I try, so i can work on the next one.  I can only work on a few at a time and then i have to go away and come back another day.  4.09 does fix the barrel distortion but it has completely gummed up the uploading of the referenced photos.  It's taking me days and weeks to process a couple of hundred photos.

    The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
    It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
    You should evaluate whether or not you have adequate RAM:
    Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
    Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
    HTH
    -Allen

  • My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

    My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

    http://discussions.apple.com/thread/3418045?tstart=60

  • I just downloaded iCloud on my PC and noticed that fewer than half of my photo stream photos have transferred over to my PC.  Why is this happening and how can I get the remaining photos?  All of my devices are charged and have perfect internet signals.

    I just downloaded iCloud on my PC and noticed that fewer than half of my photo stream photos have transferred over to my PC.  Why is this happening and how can I get the remaining photos?  All of my devices are charged and have perfect internet signals.  Thanks in advance for any tips and insights!

    It's probably happing because photo stream photos only remain in iCloud for 30 days (even though your last 1000 photos will remain on your devices until deleted).  When you enabled photo stream on your PC you would have only received photos from the last 30 days.
    To transfer older photos to your computer, create a shared photo stream that contains them and invite yourself as a subscriber (see http://help.apple.com/icloud/#mmc0cd7e99).

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
    If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847.  It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email. 
    The other area to look at is your text messages.  These are included in the backup.  If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup.  If that's the case, deleting these may make a big difference.

  • TS3989 Only some of the photos I have taken on my iPhone appear in the photo stream on my iPad even thou they were taken at the same time. Why is this and how can I import the other photos from my iPhone to my iPad?

    Only some of the photos I have taken on my iPhone appear in the photo stream on my iPad even thou they were taken at the same time. Why is this and how can I import the other photos from my iPhone to my iPad?

    If older photos are missing it may be because photo stream photos are only held in iCloud for 30 days.  After that they are removed from iCloud but will remain (up to 1000 photos) on your device until deleted.  Also, only photos taken after enabling photo stream are added to your photo stream, and only when the camera is closed, your device is connected to wifi and you have at least 20% battery life remaining.
    To transfer the missing photos you can either create a shared photo stream containing them and invite yourself to it (see http://help.apple.com/icloud/#mmc0cd7e99), import the photos to your computer and sync them to your iPad, or use an app like PhotoSync to transfer them to your iPad over wifi.

  • How do you activate a 10.10.3 download.  I have downloaded twice (2 gig each) and have restarted as instructed.  I have also rebooted. "About this Mac' still reports 10.10.2 installed and I do not have the new photo app.

    I have downloaded 1010.3 twice (2+gig each).  The update window shows the 10.10.3 update has been installed, however, 'About this Mac' shows 10.10.2 installed and I don't have the new 'photo' app installed.  Once more, the quality of Apple software approaches that of Microsoft - letting the user debug instead of delivering the quality that used to be Apple.
    How do I activate the downloaded update.

    There may well be a problem with the update package.  I initially tried downloading the delta update (not the combo) from the Apple Support web site, and when I opened the package file, the installer ran but terminated almost immediately.  I restarted and only got the normal reboot process, not the "Installing software" display.  After restarting, I saw some evidence that the firmware updater was cleaning up some files, but nothing else appeared to have happened except that the 1.5Gb package file and a couple small subsidiary files had been left under /Library/Updates/_ManualUpdate.
    I tried running the command line softwareupdate tool to see if it would recognize the already-downloaded package file (which is something you might also want to try before downloading again just in case it works), but no such luck.  I then relented and used App Store, and that downloaded again and then performed the update successfully.
    Of course, then I had to horse around with turning off all the "photos in the cloud" nonsense, but that's another story.

  • Hi, dragging jpeg files into i-movie - the selection of jpegs is repeating certain photos and not featuring others, making the entire sequence impossible to view. PLEASE HELP!

    Hi, I have been dragging jpeg files into i-movie all week without issue. Now all of a sudden, the selection of jpegs I'm dragging is repeating certain photos and not featuring others, making the entire sequence impossible to view.
    Please help, this is urgent for a funeral tomorrow! It didnt happen with any of the other family tributes, they all worked fine.
    Many thanks,
    Ruth

    It worked! Thank you! I finally just finished about 20 minutes ago! It took over 26 hours to complete the process you described, but I stuck with it and it worked. I am glad I didn't give up or "forget it" as some might have suggested. That would have set me back until tomorrow!
    Ultimately, it turned out there were 45,910 jpgs created. No wonder it took so many hours to render/display them all. It ended up being about 10 hours before it seemed they were all rendered but the process between them displaying and being able to start really deleting them took a few hours because partly I was asleep and also partly it took forever to do anything. Any action as simple as selecting and right-clicking to Get Info, or emptying the trash, would take 20-30 minutes, a couple times longer. The clock stopped many times for 20-30 minutes at a time, a few times over 30 minutes, before catching back up. My cursor never froze which is what really kept me going, although it was a spinning beach ball for most of the time. I was never so relieved to see my regular cursor as opposed to seeing a spinning beach ball as I was early this morning after about 10 hours!
    Once I was able to open a Finder window and select all 45,900 files (I had already deleted 10 in the previous couple hours during experimenting of trying to figure out what would work best), then right-click and select to move all the files to the trash, the process of moving them to the trash took 4.5 hours. Then deleting them from the trash took a couple minutes. There were 21.4 GB!!! No wonder the whole process took 26 hours!
    mende1, thank you so much!

  • I copied some photos from the main album to a new album. And I need to delete these photos from the main album so as to have them only to the new album. When I select the photos and choose delete I get the answer DELETE EVERYWHERE

    Ι copied some photos from the main album to a new album. And I need to delete these photos from the main album so as to have them only to the new album. When I select the photos and choose delete I get the answer DELETE EVERYWHERE. I don't have the choice to delete it only from the main album.

    You mean you copied photos from your camera roll to a new album, correct? Well, that's the way it works. The photos wern't actually copied to your new album, just pointers to the actual photos, which are still in your camera roll. So, yes, if you delete from your camera roll, you remove them from your phone.

  • Photos and movies don't appear in Events/Photos but do appear in Last 12 months

    Hello. I'm using the latest version of iPhoto 11 (9.1.1). When I browse through my photos via the Events or Photos section of the iPhoto sidebar (under Library), certain photos and movies are missing. They simply don't appear there at all. However, when I click the "Last 12 Months" section of the iPhoto sidebar (under Recent), the photos and movies are there. If I try re-importing the missing photos and movies I'm told they are duplicates, so they must be in my iPhoto Library - they just refuse to show up under Events or Photos! I've tried ticking all the rebuild options by holding down command and option when I start iPhoto, but to no avail. Perhaps there's a setting I've inadvertently ticked that hides certain photos and movies? Hidden Photos is ticked under the View menu. I have View > Sort Photos set to "By date" / "Ascending".
    Thanks for all your help!
    Cheers,
    Greg

    since both last 12 months and events or photos are simply different views of the same photos in your library they are there - the most common issue is incorrect dates so you are looking in the wrong event - you can find the event by selecting the photo in the last 12 months view and and right clicking and using the show event command - you can correct the dates by selecting the photo and using the photos menu ==> adjust time/date command
    LN

  • A rebuild removed projects from photos and put empty projects in the trash.

    I'm running Aperature 3.2.4 in OS 10.6.8 (Snow Leopard) on a MacBook Pro 1,1
    I have a large library of 37,000 images on an external hard drive. I have experienced a number of problems which culminated in a corrupted drive and library which I have taken several steps to repair. In an attempt to be thorough, I may be including more info than necessary, but here is my tale.
    1) There have been inconsistencies for some time when deleting photos in the camera (compact flash card uploaded through camera) when importing photos. Occurring more frequently, the photos did not get deleted when I made that selection, most normally with the unmount camera box check. This is a big deal, I adapted by checking the camera when it was unmounted.
    2) I hadn't been emptying the trash in Aperture and accumulated several hundred photos in the trash. Blame it on procrastination and no appearance of pressing necessity.
    3) My camera has developed some problems with the USB port, perhaps getting worn with a lot of use. When importing photos, the camera has recently started disconnecting during the import of photos..
    4) This has resulted in a corrupted drive directory, which I was able to repair with Disk Warrior. It also resulted in photos that were not in the Aperture library. Aperture was no longer able to see those unimproved photos, no matter what drive I was able to copy them to. I resolved the import problem by changing the file name slightly. I assume that Aperture registers filenames before importing, and if the import fails, Aperture is unable to see that the import failed. I have added those files by changing the file names, and my long term solution was to get a CF card reader.
    5) I thought that my problems were solved, but when I opened Aperture today, I got a dialog box telling me that I need to repair permissions, then another about rebuilding the library, and a whole series of failed attempts to do so with a string of boxes suggesting that I quit, rebuild, or repair, all attempts eventually hanging. Disk Warrior tells me that several plists mostly involving changes could not be repaired. After several attempts and restarts, I was able to open the library in Aperture.
    6) The left window was missing a large number of projects, but in photo view, all of the photos and versions were there with the meta data showing a path to the original projects. In the project view, all of the projects were there, but I could not open any by clicking on them. When I viewed the trash contents, there were a lot of empty projects. It was probably a mistake, but I emptied the trash.
    7) I have not closed Aperture for fear that might result in changing those paths attached to photos. Hopefully they are the key to setting things straight.
    Is there any way I can undue the trash dump, or otherwise return photos to the appropriate projects? I'm talking about nearly 400 projects, so this is not a minor glitch.

    I quit Aperture, which hung up while writing preveiws, so I did a force quit. I restarted Aperture while holding down command and option keys, but Aperture opened directly into library with all projects and photos intact. Oddly enough the projects seem to be in a random order, certainly a different order.
    I closed Aperture without a problem
    I ran Disk Warrior again, and once again there are damaged property lists that cannot be repaired. There are 9 plists numbered from
    File: "0000000002.plist"
    thru
    File: "0000000012.plist"
    all in
    Aperture Library.aplibrary/Database/History/Changes/
    I opened Aperture again while holding down command and option keys, this time getting the dialog I wanted, and I'm now running Repair Library Database.
    Well the dang thing seems to be hung at "Repairing Library 100% complete"
    I'll give it a while, Force Quit and try again.
    Any suggestions? Should I try a rebuild on the next try?

  • I just downloaded 950 photos on iPhoto and deleted them off my camera and now under last import there is only 4 photos and i can't find the others?? There is a whole bunch of blank events in the library with no photos in them all with todays date? Help!!

    I just downloaded 950 photos on iPhoto and deleted them off my camera and now under last import there is only 4 photos and i can't find the others?? There is a whole bunch of blank events in the library with no photos in them all with todays date? Help!!

    Yes - you need a min of 10 GB just to operate - with just 1 you certainly can lose photos and other critical things - you need to make space immediately - probably by moving your iPhoto library to a volume formatted Mac OS extended -
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • HT201210 I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?

    I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?

    You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.

Maybe you are looking for