Roll up and DTP

Dear all
         I  hvae cube "A" which has an aggregate and will be loading  to the cube "B"  by DTP.
         If I forget the roll up action for "A"  and run the DTP anyway, could the cube "B" get the correct data?
         Thanks

Hi,
Roll up is basically to move the data from cube to aggregate.
If you run the DTP to move the data from cube A to Cube B although you forgot to roll the CUbe A data,the data will move from Cube A to Cube B.There wont be any impact.
Thanks,
Saveen Kumar

Similar Messages

  • Can't access photos in camera roll - camera and  photo app crashes

    Have iphone 4 with iOS 5.0. Took pictures but now I can't access any photo in the Camera Roll. When I now try to take a picture, Camera app crashes. If I try to access the Camera Roll via Photo App, it too crashes. Can't see the photos from iTunes either. Shows it as unknown data. Is there anyway to rebuild the photo library or remove a corrupted photo since I think that is the problem. Any help would be appreciated.

    Thanks to Steve Kehlet who posted the solution that helped me and saved my day, https://discussions.apple.com/message/16405821#16405821
    Follow the link:
    http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
    You will need to download PhoneView, but the free 7 day demo does the job - and my camera and photo app are up and running again!

  • What is the difference between, DSO and DTP in BI 7.0

    Hi Guru's
    what is the difference between, DSO and DTP in BI 7.0 , how it will come the data from r/3 to BI 7.0, can u discribe?
    points will be assined?
    Thanks & Regards,
    Reddy.

    Hi,
    The data will be replicated in the same way as we do in 3.5.
    Activating, and Transporting the same DS in BW, and Replicating them in BW from R/3.
    First you need to know Diff b/w 3.5 nd 7.0, for that check the below doc's:
    http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    blogs:
    /people/sap.user72/blog/2004/11/01/sap-bi-versus-sap-bw-what146s-in-a-name
    Re: How to identify Header, Item and Schedule item level data sources?
    For Transformations in BI:
    http://help.sap.com/saphelp_nw70/helpdata/en/33/045741c0c28447e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/a9/497f42d540d665e10000000a155106/frameset.htm
    For DTP:
    DTP:
    http://help.sap.com/saphelp_nw70/helpdata/en/20/a894ed07e75648ba5cf7c876430589/frameset.htm
    For DSO:
    Data Store Objects:
    http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
    Reg
    Pra

  • Errors While Transporting Transformations and DTPs

    Hi Experts,
    Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages.  Does anyone know whatu2019s happening and how I can fix this?
    Thanks,
    Janice
    The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
    Transformations:
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode) 
    Activation of Objects with Type Transformation                                                  
    Checking Objects with Type Transformation                                                       
    Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4                                        
    No rule exists                                                                               
    Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed                                             
    Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
    Message no. RSTRAN802
    No rule exists
    Message no. RSTRAN514
    DTPs:
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
    Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...                 
    Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...                 
    Activation of Objects with Type Data Transfer Process                                          
    Saving Objects with Type Data Transfer Process                                                 
    Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A                                     
    Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)               
    Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A                               
    Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
    Message no. RSO843

    Thanks so much everyone for your suggestions.  Iu2019ve tried them all and hereu2019s what I now have:
    Anil u2013 Active datasources were included in the original transport.  I tried retransporting and got the same error messages.
    Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource.  I replicated it as a 70 datasource in D and this is what was transported to Q.  It is a 7.0 datasource in Q.  I got the same error messages when I tried transporting just the transformations.
    Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
    Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages.  I tried retransporting with a new transport request and it failed with the same error messages.
    Is there anything else anyone can think of?
    Thanks,
    Janice

  • Error While Transporting Transformation and DTP

    I am trying to transport Transformation and DTP.But its giving following error.
    <b>Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)   
    InfoObject xxxx has a characteristic routine, but no rule                                  
    InfoObject xxxx has a characteristic routine, but no rule                                   
    InfoObject xxx has a characteristic routine, but no rule                                      
    InfoObject xxx has a characteristic routine, but no rule                                   
    No rule exists                                                                               
    Transformation  : Rule 1 could not be imported                                                    
    Transformation  : Rule 2 could not be imported                                                    
    Transformation  : Rule 8 could not be imported                                                    
    Transformation  : Rule 9 could not be imported                                                    
    Transformation  : Rule 60 could not be imported                                                   
    Transformation  : Rule 109 could not be imported                                                  
    Transformation  : Rule 128 could not be imported                                                                               
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)   
    Conversion of T version from DTP xxxx to M version...                    
    An exception has occurred                                                                               
    </b>
    Any help.Thanks

    Hello,
    Do you have any routines in the transformation you are trying to transport. Looks like its missing some routines that needs to be transported.
    Hope that helps.

  • While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation a

    While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
    How do I modify the system.

    Hi Rgardezi,
    The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
    1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
    2) Perform a selective Start up using the steps mentioned in this link.
    Please suggest if the above mentioned steps were able to resolve the query for you or not.
    Cheers,
    Kartikay Sharma

  • When I back up my  I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

    When I back up my  I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

    iCloud- Photo Stream FAQ
    iCloud- Photo Stream limits
    iCloud- How to delete photos from Photo Stream
    iCloud- Photo Stream troubleshooting
    iCloud- Using and troubleshooting Shared Photo Streams
    iPhoto '11- Add, remove, and edit photos in a shared photo stream
    iPhoto '11- Create a shared photo stream
    There are obviously limits to what can be stored in Photo Stream and for how long.
    If she wants backups then she will need something like this: Seagate Wireless Plus.

  • Local roll area and Roll area

    Please refer to following contents from TADM12_2:
    1. Virtual Memory includes local memory and shared memory.
    2. Local memory is associated with individual work processes.
    3. Local work processes memory is for: ABAP load; Data, stack; Buffer for database transfer; Local roll area; Local paging area.
    4. The roll file and its associated buffer(also called Roll area).
    5. The page file and its associated buffer(also called (SAP) Paging area).
    In t-code ST02,
    1. the first part is Buffer, all of them belong to shared memory.
    2. the second part is SAP Memory, there are four sub-items:
        a)Roll area
        b)Page area
        c)Extended memory  --> in shared memory
        d)Heap memory  --> in local memory
    I am confused whether Roll Area and Page Area here means local Roll/Paging Area in local memory, or Roll/Paging Buffer in shared memory?
    Please advise. Thanks
    James

    Hi James,
    Roll Area and page area allocated on local memory, and their buffer areas are allocated on local memory, also. This is because roll and page area are first two block on memory diagram. Those memory areas are dedicated to a work process and start to use when extented memory is filled up. Take a look at "http://help.sap.com/saphelp_nw70/helpdata/EN/28/d1d3f6bcb411d188b30000e83539c3/frameset.htm" for the memory diagram on SAP
    Best regards,
    Orkun Gedik

  • My camera roll photos and video won't upload to iMovie. Any suggestions?, My camera roll photos and video won't upload to iMovie. Any suggestions?

    I haven't had a problem until I updated my iPad. Now my camera roll photos and videos won't show up in iMovie. I updated the App and shut down my iPad.  I would love some help.  Thanks.

    Go to SETTINGS--> PRIVACY and then PHOTOS; make sure iMovie is set to "on".
    Should work then. (Did for me).

  • Load Masterdata with Infopackage and DTP..Is there any other way simplier ?

    Dear all:
    We are currently working under BI 2004s SP09. And we are trying to loading Masterdata from R3. For Attributes and text, we have to create Infopackage for DS, load data from R3 into PSA(Not able to into Char directly), then create transformation and DTP to upload data into characteristics.
    If we work with transformation and DTP directly, we got nothing!!?? But if that is the only way we can upload InfoObject, the whole process seems more complexe then what happened in BW 3.X.
    Or there is way to allow us upload data into Infoobject directly with DTP?
    Thank you all very much
    BR
    SF

    Hi Kenneth,
    Am wondering whether the DTP was created at the wrong level, the top level as you have suggested, i.e the Infocube (or Infoprovider) level is the correct place to place the DTP.
    As for a simpler method, I'd stay clear of the do not access PSA.  We found numerous problems with moving to PRD and daily deltas not working correctly.
    Hence as such changed loads to OLTP > Infopackage > DTP > Data Target(be it master data).
    Hope it helps.
    Pom

  • Roll in and roll out

    hai
          what is rollin and rollout ?
          what is saint update?

    Hi,
    When users request for  connection to the sap server, all the requests are put in a queue by the dispatcher. When the dispatcher finds a free workprocess, the user request is assigned to that work process on FIFO basis. Data input provided by the user are transfered to the memory area of the workprocess. The work process communicates with the database as per the requirement of the user querry and picks data from the database into its memory area and inturn returns it to the user.
        When the user terminates the connection the work process attached to it flushes its memory area and becomes free again to be assigned to another user request. This flow of data into the memory of the workprocess and flushing of data from the memory of the work process is known as roll-in and roll-out.We can say the rollin takes place at the begining of a user request and rollout takes place on termination of the same.
    SAINT update:
    saint update means applying a patch to enhance the functions of saint. This becomes necessary to accomodate the newer attributes of the new add-on support packages. Saint is mainly used for add-on tools.
    Hope this clarifies your querry.
    Pls dont forget to award points if solved.
    Regards

  • What is program roll area and  system paging area?

    hello sir,
    i am new to abap, plz give me the answer for the following question,
    1.what is program roll area and  system paging area?
    2.from these two, system allocate memory from which one of the memory?

    check this link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/34/d9c8b9c23c11d188b40000e83539c3/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/34/d9c8b6c23c11d188b40000e83539c3/frameset.htm
    Message was edited by: kishan negi

  • G/L roll forward and Asset Roll forward

    HI
    Can some body explain me a G/L roll forward and Asset Roll forward I am new this topic is there roll forwards please explain me in detail in which situation we are using this roll forward.
    Thanks In advance,
    Regards,
    Lakshmi narayana

    Hi,
    Please refer to the following activities for 2007 Year End Closing. This document will consist of steps for Verification and Processing Activities for R/3 system activities.
    The areas of SAP which will be affected are:
    General Ledger
    Accounts Payable
    Asset
    CO
    Verification Steps:
    Assets:
    1.     Check all incomplete Assets in the system for 2007
    2.     Settle all AUC’s
    3.     Do all system adjustments for Assets
    4.     Make sure all Depreciation is posted
    FI:
    1.     Make sure all payment runs are complete
    2.     Open new period for new year
    3.     Do all GL/AP Adjustments
    4.     Post all Park documents
    Process Steps:
    Asset:
    1.     ABST2; Reconciliation Program. List of differences between FI-AA/GL
    2.     AFRW; Asset Fiscal Year
    3.     AJRW; Asset Fiscal Year Change. This closes the FY
    AP/AR:
    1.     F.07: Customer/Vendor Balance Carry forward
    GL:
    1.     FAGLGVTR or F.16: GL balance Carry Forward
    2.     OB52: Close all periods for 2007. Will only open period 1-1, 2008
    CO:
    1.     OKP1; Lock Actual & Plan
    2.     2KES
    Hope this helps,please assign points.
    Thanks,
    Rau

  • TRANSFORMATION AND DTP

    Hi all,
    I have two questions:
    1. If I have a 3x datasource..can i still use Transformations and DTP's with it in BI 7.0?
    2. I have a cube and know the datasources. Could some one give me the modelling steps that come next... i am using BI 7.0 and want to use Transformations and DTP.
    Thanks

    1. If I have a 3x datasource..can i still use Transformations and DTP's with it in BI 7.0?
    Yes - you can.
    2. I have a cube and know the datasources. Could some one give me the modelling steps that come next... i am using BI 7.0 and want to use Transformations and DTP.
    data loading in BI 7.0 from fla file extraction.
    fisrt create one Cube or DSO with the same structure which you have in flatfile..
    and activate it..
    ->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
    now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
    > and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
    > and create DTP -- Activate it.. and Execute it..
    1)Create datasource. Here u can set/check the Soucre System fields.
    2)Create Transformation for that datasource. (no more update rules/transfer rules)
    2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
    DataSource -> Transformation -> (DTP)-->Data Target
    Now if you want to load data into data target from Source System Datasource:
    1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
    2)Now Create DTP (Data Transfer Process) for that data source.
    3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
    Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
    1) Load InfoPackage
    2) Data gets loaded into PSA (hence why PSA only is selected)
    3) DTP gets "executed"
    4) Data gets loaded from PSA into the data target once the DTP has executed
    Hope it helps..

  • Inactive transformations and DTPs after running BDLS

    Hi Experts
    I ran the BDLS job, Restored , Activated and Replicated the S.S.
    Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
    My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION "  although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module  /SDF/AL_MAP_TRANSID_LOGH does not exist."  I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
    Please advice
    Thanks
    PK

    Prabu,
    have you solved this issue?
    I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
    Please let us know how you solved it.
    Appreciate your response
    Shashi
    Update:
    Note# 1142908 fixed my issue..
    Shashi
    Edited by: Shashi on Sep 10, 2008 7:22 PM

Maybe you are looking for