Roll up failed

Hi guys
we got a process chain failed due to rollup process where 10 cubes are rolled up and out of 10 for all the 9 cubes rollup is done for 1 cube it says thee is no initail fill i have gone to that failed cube and did selected that and did activate and did inital fill but i got some pop ups and i pressd later its keeps on failin daily
can i deactivae it and then active and filll the aggregats does it work?
plz healp me
cheers
dp

Hi,
See if OSS note 536433 (Incorrect data in the aggregate (duplicate records) ) is relevant for you.
Also chk out this link .....
Roll up issue.
Hope u will find the solution to ur problem in these....
Happy Life,
Aravind
Message was edited by:
Aravindakshan M R

Similar Messages

Roll-out failed , session terminated

Hi all,
when i'm giving print out from SAP or when i'm opening a new session it's showing roll-out failed , session terminated. Please help..

Hi ,
Did you try to reboot the server?, it may help you some times if you are in Windows. Some of the memory will be released once you reboot the server.
Regards,
Hari.

Install 11.3.2 FTF Roll up fails on XP

An old XP ws failed the HDD
So clean install of XP Pro, patch all patches.
Installed Novell Client 4,91 SP5 ir2
Then tried to do install of the...

We're getting frequent BSOD with---
* Surface Pro 3
* Windows 8.1 (updated to Win 10 to attempt to fix but no luck)
* ZCM FTF Roll Up 1 for...

Roll-up not possible - Help

Hi,
COPA delta load is successfully loaded in to the data target, some how i am getting the following error message and Roll up failed for the last two times.
Roll-up not possible; no filled aggregates available
Issue happend in Production, Could you please help me, to complete the roll up for the last two requests, which is loaded without any error into the target.
Thank You
Senthil

Hi Raj,
Sorry, There is an aggregate available for the data target and half a million records loaded to the target in the past two requests.
Anyway thanks.

Roll up scheduling

I have zen 3.2 sp 1 and I am working on a roll up policy.
Under the roll-up schedule properties in console one there is a check
box
for Randomly dispatch during time period. Exactly what does that
mean?
I cannot find any references to it in the documentation anywhere.
There is another box that says repeat the action. Is that in
reference to
if the initial roll up fails?
Also, I have scheduled roll up for 2 hours from 5 to 7 every monday
evening.
What if the roll up doesn't finish at 7 pm, will it continue where it
left
off the next monday?
Any insight would be greatly appreciated.
Jared H.

Thanks,
That is good info. Are you able to roll up from say 10 different
servers at
the exact same time?
Jared H.
"Uwe Buckesfeld" <[email protected]> wrote in message
news:[email protected] .227...
> "Jared H." <[email protected]> wrote in
> news:PMcVa.25204$[email protected]:
>
> > I have zen 3.2 sp 1 and I am working on a roll up policy.
> > Under the roll-up schedule properties in console one there is a
check
> > box for Randomly dispatch during time period. Exactly what does
that
> > mean? I cannot find any references to it in the documentation
> > anywhere.
>
> Nope, this means you never know when the roll up will occur, except
that
it
> will be somewhere in the time frame you set <G>
>
> > There is another box that says repeat the action. Is that
> > in reference to if the initial roll up fails?
>
> Nope, it will start again every XX hours/minutes. Keep in mind that
the
> scan policy probably runs at a completely different time, so that
the roll
> up process may find files at different times.
>
> > Also, I have scheduled roll up for 2 hours from 5 to 7 every
monday
> > evening. What if the roll up doesn't finish at 7 pm, will it
continue
> > where it left off the next monday?
>
> AFAIK yes. Actually we are talking about very small amounts of data
here.
> If you don't have a large number of workstation scans pushed across
a
modem
> connection, I think you're safe.
>
> Uwe
>
>
> --
> Novell Support Connection Volunteer SysOp
> Please don't send me support related e-mail unless I ask you to do
so.

Updates failing on local machines

I have a new WSUS server running on Windows Server 2012, lists as version 6.2.9200.16384.
The majority of clients list as 99% in the installed/not applicable percentage column, however I am getting reports from users that many updates are failing at the client side. This is not then being reported by WSUS as updates with errors. Looking
at the windowsupdate.log on the client machines I can see the line:
2014-11-21 08:54:56:527 968 1040 Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
I am also seeing a lot of Installation Successful: Windows successfully installed the following update messages.
The main issues is that this causes the system to reboot several times as it rolls back failed updates, some users reporting that it has taken up to an hour before they can log into their machines. I need to be able to see these failures in WSUS management
console, has any one seen this type of behaviour before?
Drac

I am aware that, under normal circumstances, failed updates will show as failed in the WSUS console. However, in this instance WSUS does not show any failed updates for the systems in question. The information from the users is based on
what Control Panel > Windows Updates > view update history is telling me.
You need to reconcile these allegedly failed updates against the state information reported in the console. Either these update are Installed, Not Applicable, or Needed. If the updates are still listed as Needed, then the Windows Update Agent is trying to
reinstall them at each installation event. Quite likely, the installer is returning a success code to the Windows Update Agent that says "Successful, but requires reboot", because the installation will not be completed until the restart.
Then, at the restart, the remainder of the installation fails somehow, and the work previously done is rolled back. The Windows Update Agent, however, knows nothing about this situation, so the update merely gets changed from Needed (Installed Pending Reboot)
to Needed (Not Installed) and the magic starts all over again.
There's still a missing piece here, because the only way an event can get logged in the Windows Update History is if the Windows Update Agent was involved in the process. If the WUA logged an installation failure, then it *should* report that to the WSUS
server. But there are a couple of cases in which it won't.
First, if the update installation came from somewhere other than the WSUS server; the EVENT associated with that installation will not be reported to the WSUS server. Only the STATE of the update itself: Installed, Not Installed, Not Applicable.
Second, if the failure actually predates the use of WSUS, and the users are simply misinterpreting the data. Failures are recorded permanently in the Windows Update History. Even if that very same update is subsequently installed successfully, the previous
failures will remain. This quite often misleads and confuses people reading the WUHistory.. which is why looking at the actual STATE as displayed in the console is quite often, more reliable, as it tells us what *IS* today, not what happened yesterday.
So, granted, in this unique circumstance the update is not explicitly flagged as failed. (This is an artifact of having redesigned the installation/updating methodology of the operating system, but failing to properly update the agent mechanism for Windows
Update. One of several things the WUAgent team has complicated over the past eight years).
HOWEVER.... you do still have actionable information in your console, which if you weren't ignoring in favor of "user reports", would have likely led to the same root cause.
Which *UPDATES* are listed in the console as Needed (Not Installed), and how long have they been available for installation? If the answer is more than a couple of days, then the console has told you all you need to know. Those update(s) are not being successfully
installed.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Roll file overflow

hi,
SM21 sys log shows -
Roll file overflow(065536 blocks)
Roll out failed, return code -32
Roll out failed, return code -01
I was thinking of increasing below parameters.
rdisp/ROLL_MAXFS ( Roll file)
rdisp/ROLL_SHM ( Roll buffer)
However, the SAP strategy is using Extended memory for quick roll-out / roll-in. If Roll file is increased, will it not cause increased Roll-out/Roll-in time? Should I increase extended memory instead ( this is also maxed out ).
Thanks,
Raj S

hi,
try ro increase the virtual memory or buffer space. i think this could solve your issue.
thank you
visshaal

PRINT to PDF - how to retain links as links and images as images

I print webpages to PDF all the time.
but it is not very good from fiefox for me, because of 3 reasons
1 the links on the webpage dont stay as hyperlinks in the PDF file (I test by clicking on the link in the pdf, it is blue and underlined, but does not go anywhere when clicked). This happens 100% time
2 the images dont say as images in the pdf (I test by click hold image on the iphone and if its an image, the popup will be save to image to camera roll) - this fails to happen. This happens 100% time
3 the layout is not IDENTICAL to the webpage. This happens about 50% time
so my workaround has been to
1 highlight the desired text
2 click email button (an add-on)
3 cut pasted the selected text to email
4 send to myself
5 print the email to pdf
and it works...
so this is a wee clunky ....
and clogs up my mailbox a little more than i desire...
SO
any ideas for better options.... ???
thankyou in advanced.
fyi
I checked follwowing post and it did not help
https://support.mozilla.org/en-US/questions/941692?esab=a&as=aaq
and
in about:config I could not find any setting controlling
hyperlinks
images
default to print selected only
-----

try safe mode to see if it's a plugin causing the issue
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Facing problem with call subscreen area in standard infotype

Dear SAP Guru's,
I have enhanced standard infotype 0185 from PM01, in assign enhancement tab it create multiple screens ,
my program name ZP018500, screen number 0200 generated,
on 0200 screen i need to display two subscreens tfor that
i have created subscreen area on srcreen 0200 which is already a subscreen.
and i am calling two subscreen 0201 and 0202 on that subscreen area.
while creating entries for 0185 infotype my screen keep going in continious loop for call subscreen statement on 0200 screen number.
roll in fail, session terminated error coming because of this.
is it correct to create subscreen area on subscreen and calling subscreen on that.
Guide me to solve the issue.
Thanks and Regards,
Syed

Dear Gopal,
Thanks for the reply,
But i can't make 0200 screen as normal screen because it is automatically generated by system while enhancing the standard infotype,
Please let me know any other solution.
Regards,
Syed Taj

Typical errors in process chains

hi gurus,
i wil be given the task of monitoring pc from nxt week.
can i have the typical errors regarding them and how to solve them plz.
regards,
rajesh

Hi Rajesh,
Production support for maintaining the process chains primarily involves monitoring activities of all the chains that are running in the background...
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
Majority of the issues will be based on these things only..
Hope it helps..
Regards
Manick

Maintaining a tickets

hi
can any one tell me details about maintaining a ticket and solving d tickets and closing d ticket if any body have tickets send me some tickets to [email protected]
thanking u.......
anand.

Production support for maintaining the process chains primarily involves monitoring activities of all the chains that are running in the background...
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
Majority of the issues will be based on these things only..
Hope it helps..
Regards
Manick

Adobe's new 64 bit multimedia operating system code named Quick Silver

As far as I know Adobe is not creating a 64 bit bit operating system but I wish they would. Or at the very least they should make a web browser called Quick Silver. I am writng this because I seen the Mozilla Fire Fox video. I think Moziila will soon write a mobile OS and maybe even a desktop OS. They are even asking for donations. I like Fire Fox because it is free. If they charge for it I would probably just use IE. I know Adobe has the free Acrobat Reader and Flash Player why not a web borwser? I think if Adobe created an OS and gave it away free for 18-19 months it could get a large amount market share. Two years later they could start to charge $35 for the OS. I think within 3 years Adobe could get 50% of the market share for new computers if the OS was only about $35.00 for the download version ($45.00 retail version). I don't doubt that Adobe could get a good 50% of the market share and other multimedia software and hardware vendors would also support the Adobe OS. Before I make the feature request I would like to know your thoughts.

Imagine if the car industry ran like software/hardware:
Dragging your car home with a rope (and no wheels because they were not included) to spend 8 hours removing unnecessary things like 'McAfee windshield wiper fluid made from glue', 'iMovie sticky gum' on the upholstery, and "VAIO media player lemon scent deeply rigged into the AC unit" which has pretty much nothing to do with the car... only to call the dealership and ask: "when I start my car and pres the window down button the right blinker turns on and then the vehicle stops" then be put on hold for 6 months to receive the following response "what was the number of times the blinker flashed before the car turned off? we need that number to determine what part to send"... and then when you finally DO get the wheels the dealership releases a new version of your car and the state puts a road law into effect that crashes your vehicle when it touches the road unless you pay the dealership to upgrade from car 1.5 to car 1.5.7390... which when you do the engine is not supported? So... you buy the NEW NEW car that comes with 1.6 installed in the engine and find out the wheels will not be released till next month.
dig?
~lol.
i do try remain cheerful and hopeful... but its not funny anymore.
you make a good point, but... are there some sales statistics for that?
light trolling, but seriously, does final cut have a support problem, roll out fail, error code and forum track record anything at all like this?
google ->site: forums.adobe.com = About 12,500,000 results
google ->site:forums.adobe.com = About 3,880,000 results
I think the FCP thing is a great idea. Lets check back in a year and see who bought it...
I would totally would have preferred to pay $6500.00 for a "Dedicated Adobe Tower Master Collection Desktop" @ $65 per month (hardware included)
instead of the $20,000 shelled out over the last 10 years on soft (PLUS another 2 desktops and 3 laptops and the gadgets since 2002)
not to mention the time lost. the valuable time I will want back on my deathbed. lol
Even if Adobe does not do a proprietary OS, I am thinking it still makes sense for some 3rd party to bundle, its not the same though...
Apple is on to something in my opinion.
Imagine Apple and Microsoft teaming up with Adobe to produce very specific machines?
Other industries do this, they communicate, they have standards, look at how Vehicles and Tire manufacturers collaborate...
When a new car comes out they don't just change the wheel well and expect the Tire manufacturers to follow suit later, no indeed, that kind of thing is rolled out proper and one can drive right off the lot the day its bought.

Restart a processin process chain

hi
can anybody tel me how to restart a process when a process fails. I want to know the load and other processes
thanks in advance

Hi Pradeep,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Need information-BW System administration-process chains

Hi gurus,
I need information about BW System administration-process chains
can anyone send me the docs related to
1)process chain modellin aspects
2)process chain monitoring &error handling
3)BW statistics and query tuning with aggregates
Thanks in advance..
regards
s ram

Hi,
Check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
Process Chain
process chain
BW STATISTICS
If you are asking abt the flags that you see in RSA1 -> Tools -> BW Stats...you can check BW Stats for each and every infoprovider. Whenever you create an infopprovider you should always decide whether you want to turn on the BW Stats for this infoprovider. This is a manual step and can be done in each and every box individually or can be transported across the systems. Coming to your question...BW Stats are of two kinds...
1) OLAP -
If you check this flag for an infoprovider...all the statistical data for the queries built on this infoprovider gets updated into the corresponding infocubes (0BWTC_C02 and 0BWTC_C03). An example would be like number of users that ran the report in a given time, the average run time of the query and so on. This data is of immense value in deciding the steps for performance tuning techniques like aggregates!
2) WHM (Warehouse Management) -
If you turn this flag on for an infoprovider, all the statistical data like how often the cubes are loaded, when are the requests deleted from the infocubes, data abt condensing of cubes and so on is loaded into the corresponding cubes like 0BWTC_C04, 0BWTC_C05, 0BWTC_C09 and 0BWTC_C11.
You have to activate the infopackages to load into these cubes and schedule them through process chain to run once in a while so that your statistical data is uptodate.
Production support for maintaining the process chains primarily involves monitoring activities of all the chains that are running in the background...
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
Majority of the issues will be based on these things only..
****Assign Points If Helpful****
Regards,
Ravikanth
Message was edited by:
RK.PNV

Roll up failed

Similar Messages

Maybe you are looking for