Roll-up not possible; no filled aggregates available

hi sapgurus,
        I am facing the following while running my process chains:
Roll-up not possible; no filled aggregates available
Rollup is ended with error;
My problem i don't have sufficient authorization to cube to do the manual roll
Please help me,and how to proceed with this error.

ashwin,
  Thanks for your reply.
  Though i am not able to see the data in cube,i am able to see the aggregates in the cube by clicking on aggregates button on right side of the cube.
I observed that button "filled/switched off" is red should i activate them .How to do that?.
Please help me with this?.
thanks in advance.
Message was edited by:
        NRUPAL CHOWDARY

Similar Messages

  • Roll-up not possible - Help

    Hi,
    COPA delta load is successfully loaded in to the data target, some how i am getting the following error message and Roll up failed for the last two times.
    Roll-up not possible; no filled aggregates available
    Issue happend in Production, Could you please help me, to complete the roll up for the last two requests, which is loaded without any error into the target.
    Thank You
    Senthil

    Hi Raj,
    Sorry, There is an aggregate available for the data target and half a million records loaded to the target in the past two requests.
    Anyway thanks.

  • DSL contract changes not possible since FIOS is available?

    I've been a Verizon DSL customer for 4-5 years. Only the 1.5Mbps is available to us. FIOS became available shortly after I signed for DSL. For the past year (or 2?), I've been considering moving out of state, as a result, I've been on the monthly plan (~$39/month). Yesterday I called Verizon because I wanted to see what the current DSL prices were (768Kbps service and the yearly price for the 1.5Mbps service) and if maybe the 3Mbps service had become available. To my surprise, I was told that I could not make any change to my DSL service since FIOS was available..... Now, I would love to need FIOS, but I can not justify the price for that cool toy when I don't even benefit from/use in full the 1.5Mbps DSL service....
    Is this everybody's experience? Is that a new move for Verizon to try to pay for the fiber optic infrastructure they laid down? I mean, this is not something I asked them to do.... I'd rather have them go with faster DSL speed instead of fiber (that's what they have in other countries, ADSL 20 or 30Mbps) rather than not provide me a choice.... I've been a loyal customer and feel cheated. As much as I hate it, I'll have to look at what the cable company now offers since every dollar spent counts.
    I'm probably a bad customer for all players involved (cheapest phone service, cheapest TV service, not cheapest DSL service).

    When I moved in Auguest I had no problem getting the current DSL at my new place. I flat out told them if they said I had to have FIOS I would go to Comcast. Maybe you got someone new or something. I would try again. If you don't get the answer you want talk to a supervisor and if you still don't get the answer you want they have a line for people who have been unable to resolve issues through those normal channels. It is in the phone book. I have used it before. Good luck. I hope you are able to work it out.

  • HT4743 Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it have been aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..

    Hi,
    Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it's aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..
    Thanks,
    Rennuss

    Ask the content provider.

  • IPhoto update can't be installed on my MAC ref. "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?

    Recent upgrade to OS X Yosemite on my MAC and iPhoto update can not  now be installed msg reads, "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?

    That error message can be misleading. It means, that iPhoto on your Mac is not associated with your Apple ID.
    Either you did not set up  your Mac using the same Apple ID - did someone help with your setup and use a different ID? Perhaps a family member? Or did you let someone borrow your installer disks?
    Or did you not yet "Accept" iPhoto and other iLife apps to your Apple ID? Check the "Purchased" tab of the App Store, if any applications are waiting to be accepted. If you see "Accept" buttons, press them.
    You may  be unable to "Accept" now, if you missed the update to iphoto 9.5.1 on Mavericks. You could try to buy iPhoto, however. If you are lucky, it may show for free.
    Backup your iPhoto library, if you do not have a current backup.
    Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put it back,if need be.
    Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
    Open the main page "Featured" of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/

  • I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

    I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

    The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
    That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
    For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

  • IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

    IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately.  IMEI 013311005943507. Help please! the official service Moscow  representation FDA ipad offer to send in the U.S. for $ 500!

    Hello this is happening to us also (minus the Bluetooth speaker).  We can't figure out what is causing the data usage.  I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started.  Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours.  My husband called Verizon  and got the usual doubting Thomas response.  I understand that they don't know my device settings.  So over the phone we check all the settings and turned  off every possible culprit eating up the data and end the call.  By now I have purchased another gig for the month!  Assured we are NOT using mobile data, we continue on the IE path to bliss.  HA!  A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data.  After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card.  This has stopped the data usage, but it defeats the purpose of having the data plan.  I could have just stuck with my Surface.  Verizon sent us a new sim card.  Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot.   I am surprised at the number of complaints about this device.  When we called the Verizon support acted as though this was the first time they had heard about this.   Loved your post, you should write for a living.

  • HT204390 Before the recent iOS 7 update I could get closed captioning on amazon prime movies, now it's not possible even the ones that have CC available ..  I've turned in on in setting on my iPad mini but it doesn't work. Netflix is no problem.

    Before the recent iOS 7 update I could get closed captioning on amazon prime movies, now it's not possible even the ones that have CC available ..  I've turned it on in setting on my iPad mini but it doesn't work. Netflix is no problem.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Delta extraction is not possible at the moment

    Hello,
    I am trying to run a delta load and am getting the message "Delta extraction is not possible at the moment".  This is actually a repeat because i have tried this load multiple times with no success.
    The Diagnosis in the error message is:
    The delta extraction is not possible at the moment because the status list of the request is locked in the Cube. This can be for a number of reasons:
    1. Another extraction is taking place in the target BI.
    2. The control parameters of the request in the InfoCube are locked by deletion or compressing processes.
    I dont see that any other extraction or a deletion or compression job.  I've tried going through each failed job in the monitor and red lighting them but that hasnt helped.  Any ideas what to check or how to fix the problem?
    Regards,
    TMS

    Hi,
    From what you are describing, there is already some process going on on the infoprovider you are trying to load the data to. Check if a data load is still active/activation is happening, if its a cube then are there aggregates and are they rolling up. You can check the process in SM66 or SM50 and the jobs in SM37.
    The process has locked the infoprovider and no delta or for that matter any process can be done until the earlier one finishes. You can take help from the BASIS team to find out what is locking your infoprovider.
    Cheers,
    Kedar

  • Why it is not possible to attache documents or photos to mail ??

    Why it is not possible to attache documents/photos/mp3s to mails?it is very much inconvenient!!!

    Why would you send an mp3 via email in the first place?
    The iPhone allows you to attach a single picture to an email. In addition to pictures that you take with your phone's camera, you can also send images that you have synced with iTunes or saved from your iPhone's Safari browser. When you attach a picture, the Mail application allows you to optimize your picture's file size before sending it.
    Step 1
    Tap "Photos" on the Home screen and tap "Camera Roll" under "Albums."
    Step 2
    Tap the photo that you want to attach to an email and tap the "Options" icon on the bottom left corner of the screen. Select "Email Photo" and enter the recipient's email address next to "To." Type any additional information in your email's body, if necessary.
    Step 3
    Tap "Send" and choose the file quality that you want to use for the picture.
    Researching something before purchasing is always a smart step to consumerism. If you dont see the feature, than compromise and use a 3rd party app. with millions of apps available I'm sure you can google it to find something to attach documents.

  • NOT POSSIBLE TO START ESSBASE WHEN SSO INITIALIZATION FAILS

    Version is 11.1.1.3. My Essbase is not starting. Issues from the logs and what I have attempted are as follows. I have highlighted the relevant areas in bold.
    When Starting Essbase from products/Essbase/bin/start.bat:
    C:\Hyperion\products\Essbase\bin>start.bat
    C:\Hyperion\products\Essbase\bin>REM eis
    C:\Hyperion\products\Essbase\bin>net start "Hyperion Integration Services"
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Hyperion\products\Essbase\bin>REM APS
    C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\aps\bin\start.bat
    C:\Hyperion\products\Essbase\bin>REM aps
    C:\Hyperion\products\Essbase\bin>net start HyS9aps
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Hyperion\products\Essbase\bin>REM EAS
    C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\eas\bin\start.bat
    C:\Hyperion\products\Essbase\bin>REM eas
    C:\Hyperion\products\Essbase\bin>net start HyS9eas
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Hyperion\products\Essbase\bin>REM EssbaseAgent
    C:\Hyperion\products\Essbase\bin>net start hypservice_1
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    C:\Hyperion\products\Essbase\bin>REM EssbaseStudio
    C:\Hyperion\products\Essbase\bin>C:\Hyperion\products\Essbase\EssbaseStudio\Server\startServer.bat
    C:\Hyperion\products\Essbase\bin>setlocal
    C:\Hyperion\products\Essbase\bin>set CONFIGTOOL_HOME="C:\Hyperion\common\config\9.5.0.0"
    C:\Hyperion\products\Essbase\bin>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
    Logging configuration file is not found. Expected filename is C:\Hyperion\products\Essbase\bin\.\server.properties
    Log file location is:
    C:\Hyperion\logs\esbstudio\server.log
    13:23:09 11/01/11 INFO Starting up
    13:23:09 11/01/11 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Bui
    ld 090, June 25 2009
    13:23:16 11/01/11 (system) WARNING Failed to load driver for sap
    13:23:16 11/01/11 (system) SEVERE Cannot load Teradata connector
    13:23:16 11/01/11 (system) WARNING Failed to load driver for teradata
    13:23:16 11/01/11 (system) WARNING Failed to load driver for mysql
    13:23:16 11/01/11 (system) WARNING Failed to load driver for netezza
    Essbase.log:
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051223)
    Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051198)
    Single Sign-On Initialization Failed !
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051232)
    Using English_UnitedStates.Latin1@Binary as the Essbase Locale
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051527)
    In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
    AND
    C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
    2011-10-25 11:26:11,039 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    2011-10-25 11:26:11,039 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
    2011-10-25 11:26:11,085 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
    2011-10-25 11:26:31,023 ERROR [main] 20:1092:Failed to initialize EPM System registry. *[Root Cause: java.sql.SQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
    *2011-10-25 11:26:31,023 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\,* com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    2011-10-25 11:26:31,023 INFO [main] CSS system intialization failed. : [21484 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    What I have attempted:
    - Attempted to connect to Shared Services, Workspace url's - YES
    - Checked openLDAP & my Database is running - YES
    - Added following to Configuration File :
    SharedServicesLocation machinex 28080
    AUTHENTICATIONMODULE CSS http://machinex:28080/interop/framework/getCSSConfigFile YES, but same error
    - Changed essbase.bak to essbase.sec YES but same error
    - netstat -an to check for 1423. Port 1423 is not listening, although ALL TCP Ports have been enabled. So YES but same error.
    - Read Knowledgebase article # 954322.1 - the suggested things in there don't seem to apply to my case, unless I am missing something.
    At this point does anybody have any suggestions ?

    An update: Just for kicks, I tried restarting Essbase using Start->Programs-EPMSystem->Essbase->EssbaseServer->Essbase.bat and apparently now Essbase is started.
    EAS, Studio and Planning however are down.
    Excerpt from the HyS9eas-sysout.log:
    [ERROR] RegistryUtils - SQL Exception when trying to create a new connection [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect
    * CRITICAL ERROR: Common Security Services initialization failed. Please *
    * make sure that a valid entry is provided for SECURITY_CONFIGURATION in *
    * OlapAdmin.properties. This is required if Shared Services is enabled. *
    * Please restart the server after the changes. *
    Stopping DAO factory!
    HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
    java.lang.ExceptionInInitializerError
    .... bunch of java code.
    This is really strange. There is NOTHING that I changed, started or stopped which could have caused Essbase to start magically all of a sudden.
    Any insights into the cause of all this ?

  • NTLM Authentication : why is it not possible to create more than one NTLM realm ?

    Hello,
    I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
    Can you explain exactly what is the blocking point ?
    Thanks in advance
    Regards

    Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship.  From that point it is all based on how NT/Active Directory domains work.   As long as there is a trust between the domains, you can can auth users from as many domains as you like.
    There is an agent in the works.  The ADAgent will be released with 7.5.  The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA.  At this point, current versions still require trust relationships between all of the domains touched.
    Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
    Before you configure even a single domain controller machine using the
    adacfg dc create
    command, ensure that the AD Agent machine is first joined to a domain (for example, domain
    J
    ) that has a trust relationship with each and every domain (for example, domain
    D[i]
    ) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
    Depending on your Active Directory domain structure, the following scenarios are possible:
    1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
    2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
    3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
    a. A two-way external trust relationship can be established between the two domains, D[i] and J
    b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

  • Why is it not possible to install apple remote desktop (from appstore bought earlier) on my new imac 21?

    why is it not possible to install apple remote desktop (from appstore bought earlier) on my new imac 21?

    hello Dahveed, thanks for your reply, i solved it with the help of the migration assistant from another mac - now it works (but before as more info: for my new imac it was not possible to install apple remote desktop from appstore (the install-button not available, the same as installed already...) - and i don't know why...? - is it possible that the reason is the number of owned macs?)

  • Not possible to scroll the menu without lagging - Set Up a Repair service is not working

    Hi,
    It is not possible to scroll the menu without lagging.
    The latest version has been restored but nothing.
    I think the touch screen is having some problems.
    I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
    As soon as push the Continue button, nothing happens.
    Is there anybody from Apple who can check this issue please?
    Thank You.
    Anmary

    Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
    You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is  part of the backup.
    More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
    Not being able to fill in the passcode is not much different from forgetting it.
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Also have a look at this one: iTunes: About iOS backups

  • The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

    Hi all ,
    Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
    But im getting below error, even i removed the select query still same error is occuring.
    Error when processing your request
      What has happened?
    The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
    Note
    The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
    The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
    Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
    Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
    Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
    Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
    Method: INIT of program CL_WDR_CONTROLLER=============CP
    Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

    Thanks Rama,
    Acutally i accidentally commented the lo_nd_student = wd_context ....etc
    this line was commented .
    i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
    my table node is student having attributes as name , city and number , all are of type strings.
    now i created one custom table zstudent having ID - char of length 10,
    name of type string
    city of type string
    num of type string
    i have inserted records
    but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
    im getting same above error.

Maybe you are looking for

  • How to change the Destination URI value of a item table at run time

    I'd like to change the Destination URI of item of a table region when a column X of my view is not NULL. Where should I set the new Destination URI value for the item table region for specific row? Is in the RowImpl for the view object or in the Cont

  • Import Fireworks slideshow to Dreamweaver page

    Hi, I created a photo gallery (slideshow) in Fireworks CS4 and everything is working smoothly. Now I want to add this slideshow to my Dreamweaver page BUT I am new to this and I don't know how to include it. I noticed that depending on the type of fi

  • Infotype 0008 Not Updated

    Hi Gurus, We have created a dynamic action running in background in order to update infotype 0008 with the new Grades and Levels of the employee,when an Organizational Reassignment is executed. However, the user who executes the action doesn't have s

  • How to call System Form base on User Form

    I want to reuse System Form that "list of items" on service call, Show the "list of items" Form base on my own Form, How to do? thanks Tony

  • Okay, what is the deal with ITUNES plus?

    I've read multiple threads and post. I've downloaded the new version. From what I've gathered, it seems only EMI artists are currently part of the ITUNES plus? I also understand you are "supposed" to be getting a better quality of sound from artists