Rollback to 10gR2 a 11gR2 Upgrade
Dear all,
At this time we're testing the rollback plan for the 11g upgrade on a RAC+ASM 10g Architecture. For that purpose we made a full backup of the database and created the new 11g Installation on a separated Oracle_Home.
Our aim is to test the required steps and components that we would need in case the upgrade proces fails and we be forced to return to 10G.
My initial plan was to shutdown the Oracle 11g software, start RAC+ASM in 10g and restore the DB from the 10G backup prior to the upgrade.
Is there any additional step that you find necessary (backup of asm instances, ocr and voting disks) ?
Thanks in advance for your help.
Regards
Hi Sebastian,
Basically the problem that I have is that CRS doesn't start and if I take a look at the CRS logs I see the error that I've written before:
output from CRS_HOME/log/node/crsd/crsd.log :
+
2011-03-24 20:41:43.167: [ default][307591920][ENTER]0
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2011-03-24 20:41:43.167: [ default][307591920]0CRS Daemon Starting
2011-03-24 20:41:43.168: [ CRSMAIN][307591920]0Checking the OCR device
2011-03-24 20:41:43.182: [ CRSMAIN][307591920]0Connecting to the CSS Daemon
[ OCRUTL][307591920]u_version_compatible: Versions are not compatible. Program Ver [10.2.0.4.0] Persist Ver [11.2.0.2.0]
2011-03-24 20:41:43.223: [ CLSVER][307591920]0Version of Daemon 10.2.0.4.0incompatible with the installed CRS software version 11.2.0.2.0
2011-03-24 20:41:43.223: [ CRSD][307591920][PANIC]0CRSD exiting: Version Compatibility check failed
2011-03-24 20:41:43.223: [ CRSD][307591920]0Done.
+
The only error I get when I execute root.sh is that in the last node a timeout raises starting CRSD services.
In the alert fille (crs_home/log/node/alertnode.log) those are the last lines:
+
[cssd(7530)]CRS-1601:CSSD Reconfiguration complete. Active nodes are seuractst01 .
[cssd(7530)]CRS-1601:CSSD Reconfiguration complete. Active nodes are seuractst01 seuractst02 .
2011-03-24 20:13:15.340
[cssd(7530)]CRS-1612:node node02 (2) at 50% heartbeat fatal, eviction in 29.002 seconds
2011-03-24 20:13:16.343
[cssd(7530)]CRS-1612:node node02 (2) at 50% heartbeat fatal, eviction in 28.002 seconds
2011-03-24 20:13:30.340
[cssd(7530)]CRS-1611:node node02 (2) at 75% heartbeat fatal, eviction in 14.002 seconds
2011-03-24 20:13:31.343
[cssd(7530)]CRS-1611:node node02 (2) at 75% heartbeat fatal, eviction in 13.002 seconds
2011-03-24 20:13:39.350
[cssd(7530)]CRS-1610:node node02 (2) at 90% heartbeat fatal, eviction in 5.002 seconds
2011-03-24 20:13:40.352
[cssd(7530)]CRS-1610:node node02 (2) at 90% heartbeat fatal, eviction in 4.248 seconds
2011-03-24 20:13:41.343
[cssd(7530)]CRS-1610:node node02 (2) at 90% heartbeat fatal, eviction in 3.002 seconds
2011-03-24 20:13:42.346
[cssd(7530)]CRS-1610:node node02 (2) at 90% heartbeat fatal, eviction in 2.002 seconds
2011-03-24 20:13:43.348
[cssd(7530)]CRS-1610:node node02 (2) at 90% heartbeat fatal, eviction in 1.002 seconds
2011-03-24 20:13:44.350
[cssd(7530)]CRS-1610:node node02 (2) at 90% heartbeat fatal, eviction in 0.248 seconds
2011-03-24 20:13:45.113
[cssd(7530)]CRS-1607:CSSD evicting node node02. Details in /u01/crs/oracle/product/10/crs/log/node01/cssd/ocssd.log.
[cssd(7530)]CRS-1601:CSSD Reconfiguration complete. Active nodes are node01 .
[cssd(7530)]CRS-1601:CSSD Reconfiguration complete. Active nodes are node01 node02 .
+
On the referenced file these are the last lines, there are many errors but at the end it seems to perform the operation sucessfully:
+
[ CSSD]2011-03-24 20:15:43.444 [1161517376] >TRACE: clssnmsendConnAck: node 2, node state 0
[ CSSD]2011-03-24 20:15:43.444 [1161517376] >TRACE: clssnmSendConnAck: connected to node 2 , ninfcon (0x7d3c4e0), state (0)
[ CSSD]2011-03-24 20:15:43.444 [1161517376] >TRACE: clssnmConnComplete: connecting to node 2 (con 0x7d3c4e0), ninfcon (0x7d3c4e0), state (0)
[ CSSD]2011-03-24 20:15:44.353 [1234946368] >TRACE: clssnmDoSyncUpdate: Initiating sync 4
[ CSSD]2011-03-24 20:15:44.353 [1234946368] >TRACE: clssnmDoSyncUpdate: diskTimeout set to (57000)ms
[ CSSD]2011-03-24 20:15:44.353 [1234946368] >TRACE: clssnmSetupAckWait: Ack message type (11)
[ CSSD]2011-03-24 20:15:44.353 [1234946368] >TRACE: clssnmSetupAckWait: node(1) is ALIVE
[ CSSD]2011-03-24 20:15:44.353 [1234946368] >TRACE: clssnmSetupAckWait: node(2) is ALIVE
[ CSSD]2011-03-24 20:15:44.353 [1234946368] >TRACE: clssnmSendSync: syncSeqNo(4)
[ CSSD]2011-03-24 20:15:44.354 [1234946368] >TRACE: clssnmWaitForAcks: Ack message type(11), ackCount(2)
[ CSSD]2011-03-24 20:15:44.354 [1161517376] >TRACE: clssnmHandleSync: diskTimeout set to (57000)ms
[ CSSD]2011-03-24 20:15:44.354 [1161517376] >TRACE: clssnmHandleSync: Acknowledging sync: src[1] srcName[seuractst01] seq[13] sync[4]
[ CSSD]2011-03-24 20:15:44.354 [4292134128] >USER: NMEVENT_SUSPEND [00][00][00][02]
[ CSSD]2011-03-24 20:15:44.354 [1234946368] >TRACE: clssnmWaitForAcks: done, msg type(11)
[ CSSD]2011-03-24 20:15:44.354 [1234946368] >TRACE: clssnmDoSyncUpdate: node(2) is transitioning from joining state to active state
[ CSSD]2011-03-24 20:15:44.354 [1234946368] >TRACE: clssnmSetupAckWait: Ack message type (13)
[ CSSD]2011-03-24 20:15:44.354 [1234946368] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[ CSSD]2011-03-24 20:15:44.354 [1234946368] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmWaitForAcks: Ack message type(13), ackCount(2)
[ CSSD]2011-03-24 20:15:44.355 [1161517376] >TRACE: clssnmSendVoteInfo: node(1) syncSeqNo(4)
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmWaitForAcks: done, msg type(13)
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmCheckDskInfo: Checking disk info...
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmEvict: Start
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmWaitOnEvictions: Start
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmSetupAckWait: Ack message type (15)
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
[ CSSD]2011-03-24 20:15:44.355 [1234946368] >TRACE: clssnmSendUpdate: syncSeqNo(4)
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >TRACE: clssnmUpdateNodeState: node 1, state (3/3) unique (1300992895/1300992895) prevConuni(0) birth (1/1) (old/new)
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >TRACE: clssnmUpdateNodeState: node 2, state (2/3) unique (1300994141/1300994141) prevConuni(0) birth (4/4) (old/new)
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >USER: clssnmHandleUpdate: SYNC(4) from node(1) completed
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >USER: clssnmHandleUpdate: NODE 1 (seuractst01) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >USER: clssnmHandleUpdate: NODE 2 (seuractst02) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2011-03-24 20:15:44.356 [1161517376] >TRACE: clssnmHandleUpdate: diskTimeout set to (200000)ms
[ CSSD]2011-03-24 20:15:44.356 [1245436224] >TRACE: clssgmReconfigThread: started for reconfig (4)
[ CSSD]2011-03-24 20:15:44.356 [1245436224] >USER: NMEVENT_RECONFIG [00][00][00][06]
[ CSSD]2011-03-24 20:15:44.356 [1245436224] >TRACE: clssgmEstablishConnections: 2 nodes in cluster incarn 4
[ CSSD]2011-03-24 20:15:44.356 [1234946368] >TRACE: clssnmWaitForAcks: Ack message type(15), ackCount(0)
[ CSSD]2011-03-24 20:15:44.356 [1234946368] >TRACE: clssnmDoSyncUpdate: Sync 4 complete!
[ CSSD]2011-03-24 20:15:44.358 [1119557952] >ERROR: clssnmvReadFatal: voting device corrupt (0x00000000/0x00000000/0//dev/raw/raw2)
[ CSSD]2011-03-24 20:15:44.411 [1203476800] >TRACE: clssgmInitialRecv: (0x7d3c290) accepted a new connection from node 2 born at 4 active (2, 2), vers (10,3,1,2)
[ CSSD]2011-03-24 20:15:44.411 [1203476800] >TRACE: clssgmInitialRecv: conns done (2/2)
[ CSSD]2011-03-24 20:15:44.411 [1245436224] >TRACE: clssgmEstablishMasterNode: MASTER for 4 is node(1) birth(1)
[ CSSD]2011-03-24 20:15:44.411 [1245436224] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[ CSSD]2011-03-24 20:15:44.412 [1245436224] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 4 with 2 nodes
[ CSSD]CLSS-3001: local node number 1, master node number 1
[ CSSD]2011-03-24 20:15:44.413 [1245436224] >TRACE: clssgmReconfigThread: completed for reconfig(4), with status(1)
+
Many thanks for your help
Similar Messages
-
R0 Rollback Segment in Import of 10gR2 into 11gR2 Database
I have a new install of Oracle Database Server Enterprise Edition 11.2.0.3.6 on AIX 7.1.
I used the DBCA to create two databases and used export datapump and import datapump to upgrade two 10gR2 database to 11gR2.
One of the import logs includes the following messages:
Processing object type DATABASE_EXPORT/ROLLBACK_SEGMENT
ORA-39083: Object type ROLLBACK_SEGMENT failed to create with error:
ORA-02221: invalid MAXEXTENTS storage option value
Failing sql is:
CREATE ROLLBACK SEGMENT "R0" TABLESPACE "SYSTEM" STORAGE(INITIAL 131072 NEXT 131072 MINEXTENTS 2 MAXEXTENTS 2147483645)
I verified that the source database has R0 with maxextents of 2147483645.
I can copy and modify the CREATE ROLLBACK statement and lower the value assigned to MAXEXTENTS, or use MAXEXTENTS UNLIMITED, then run the command in the target database.
In light of the fact that the DBCA did not create R0 in my two 11gR2 databases, I want to know if I still need to create R0 in the one that showed the error in the import log. Has anyone else noticed the disappearance of R0?
Here are the rollback segments that exist in the 11gR2 database at this time:
SQL> Select SEGMENT_NAME, OWNER, TABLESPACE_NAME, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE, STATUS
from SYS.DBA_ROLLBACK_SEGS;
SEGMENT_NAME OWNER TABLESPACE_NAME INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_EXTENTS PCT_INCREASE STATUS
SYSTEM SYS SYSTEM 114688 57344 1 32765 ONLINE
_SYSSMU1_3638931391$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU2_3033359625$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU3_2670780772$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU4_286801445$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU5_1738828719$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU6_3548494004$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU7_700714424$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU8_2755301871$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU9_2087597455$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU10_3267518184$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
11 rows selected.
Thanks,
BillSrini,
Both the 10gR2 and 11gR2 versions of the database are using automatic undo management.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> show parameter undo
NAME TYPE VALUE
_undo_autotune boolean TRUE
undo_management string AUTO
undo_retention integer 14400
undo_tablespace string UNDOTBS1
SQL>
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 14400
undo_tablespace string UNDOTBS1
SQL>
Do you know anything about Oracle no longer automatically creating R0 in 11gR2?
Thanks,
Bill -
EBS 11.5.10.2
Sue Linux 10 SP2
HRMS application
Database 10.2.0.4
I am planning on upgrading 10gr2 to 11gr2(11.2.03) in EBS 11.5.10.2.
I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
Thanks.I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
The doc says "Also apply patch 9835302" in addition to AutoConfig patches, so you need to apply both -- (Patch 9835302 and Patch 9535311).
Thanks,
Hussein -
OWB 10gR2 and 11gR2 integrate which with oracle database versions
I request a clear definite reply as I need to suggest the client to upgrade their production databases. I did try searching on the oracle sites, but did not get any sure answer.
Question:
The client has databases on 8i, 9i & 10g. Will OWB 10gR2 support these data sources?
If not, either I will have to ask clients to upgrate 8i & 9i to oracle 10g or have them upgrade the same and also have them upgrade to OWB 11gR2.
So, please confirm support of database versions for both OWB 10gR2 & OWB 11gR2.
Thanks much!I already had the 'Release notes' link for both 10g and 11g which you provided.
The issue is when I launch the URL, I am taken to https://support.oracle.com/CSP/ui/flash.html.
Here I've to submit and register Sun Contract Number or Oracle Support Identifier. I don't have these details.
Isn't there a simple way to get the valid information on platform-specific requirements?
I mean this should be given easily on Oracle site.
Thanks much! -
Going from 10gR2 to 11gR2 - any obvious performance 'pitfalls'?
Hi, there,
I'm moving some databases from 10gR2 to 11gR2. I was wondering whether there were any obvious pitfalls in performance that I should be aware of (like the optimizer ones in previous versions). I'm taking the SPFILE from 10gR2 and modifying it as little as possible to use as my 11gR2's SPFILE.
Also, I've heard murmurs of timezones being an issue in migrating to 11gR2? I'm either going to be using export/import or TTS to move my data. I wonder if the timezone issue is related to RMAN somehow.
MarkHi,
I performed an Upgrade from 10.2.0.4.4 to 11.2.0.1 two weeks ago.
I used a note from oracle support for manual upgrade to 11gR2
the database had database vault and also had auditing enabled.
these peculiarities are all covered in the note.
I would suggest that if you have auditing enabled, set the parameter audit_trail=none before you commence upgrade.
In addition make sure the you have tested the upgrade before implementing on your production environment, this would prepare you greatly.
after the upgrade, the timezone was upgraded to 11, database vault was turned on, EM upgraded, database vault application redeployed.
all the best
samuelk
Edited by: Samuel K on Feb 24, 2011 3:13 PM
Edited by: Samuel K on Feb 24, 2011 3:14 PM
Edited by: Samuel K on Feb 24, 2011 3:15 PM -
Hidden parameters appears after Oracle 11gR2 upgrade
Platform: HP-UX B.11.31 U ia64
Upgrading from: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Upgrading to : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Issue : There are around 130 hidden parameter appear after Oracle 11gR2 upgrade.
Before upgrade I have commented the hidden parameters on the PFILE. PFILE only to start the database for the Oracle 11gR2 upgrade.
Before upgrade, checking the hidden parameter:
SQL> SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\';
optimizerextended_cursor_sharing_rel
optimizer extended cursor sharing for relational operators
allowlevel_without_connect_by
allow level without connect by
I am using client parameter file ( PFILE ) commented the hidden parameters highlighted above.
However after successful upgrade to 11gR2, creating SPFILE from the PFILE ( commented the hidden parameters) now i am getting 132 hidden parameters.
SQL> select count(1) from sys.V$PARAMETER where name like '\_%' escape '\';
COUNT(1)
132
SQL> select name from sys.V$PARAMETER where name like '\_%' escape '\';
name
aggregationoptimization_settings
alwaysanti_join
alwayssemi_join
andpruning_enabled
btree_bitmap_plans
bloomfilter_enabled
bloomfolding_enabled
bloompruning_enabled
complexview_merging
compressioncompatibility
connectby_use_union_all
convertset_to_join
costequality_semi_join
cputo_io
dimensionskip_null
eliminatecommon_subexpr
enabletype_dep_selectivity
fastfull_scan_enabled
firstk_rows_dynamic_proration
gbyhash_aggregation_enabled
generalizedpruning_enabled
globalindexpnum_filter_enabled
gsanti_semi_join_allowed
improvedouterjoin_card
improvedrow_length_enabled
indexjoin_enabled
ksbrestart_policy_times
leftnested_loops_random
localcommunication_costing_enabled
minimalstats_aggregation
mmvquery_rewrite_enabled
newinitial_join_orders
newsort_cost_estimate
nljbatching_enabled
optimadjust_for_part_skews
optimenhance_nnull_detection
optimnew_default_join_sel
optimpeek_user_binds
optimizeradaptive_cursor_sharing
optimizerbetter_inlist_costing
optimizercbqt_no_size_restriction
optimizercoalesce_subqueries
optimizercomplex_pred_selectivity
optimizercompute_index_stats
optimizerconnect_by_combine_sw
optimizerconnect_by_cost_based
optimizerconnect_by_elim_dups
optimizercorrect_sq_selectivity
optimizercost_based_transformation
optimizercost_hjsmj_multimatch
optimizercost_model
optimizerdim_subq_join_sel
optimizerdistinct_agg_transform
optimizerdistinct_elimination
optimizerdistinct_placement
optimizereliminate_filtering_join
optimizerenable_density_improvements
optimizerenable_extended_stats
optimizerenable_table_lookup_by_nl
optimizerenhanced_filter_push
optimizerextend_jppd_view_types
optimizerextended_cursor_sharing
optimizerextended_cursor_sharing_rel
optimizerextended_stats_usage_control
optimizerfalse_filter_pred_pullup
optimizerfast_access_pred_analysis
optimizerfast_pred_transitivity
optimizerfilter_pred_pullup
optimizerfkr_index_cost_bias
optimizerfull_outer_join_to_outer
optimizergroup_by_placement
optimizerimprove_selectivity
optimizerinterleave_jppd
optimizerjoin_elimination_enabled
optimizerjoin_factorization
optimizerjoin_order_control
optimizerjoin_sel_sanity_check
optimizermax_permutations
optimizermode_force
optimizermulti_level_push_pred
optimizernative_full_outer_join
optimizernew_join_card_computation
optimizernull_aware_antijoin
optimizeror_expansion
optimizerorder_by_elimination_enabled
optimizerouter_join_to_inner
optimizerouter_to_anti_enabled
optimizerpush_down_distinct
optimizerpush_pred_cost_based
optimizerrownum_bind_default
optimizerrownum_pred_based_fkr
optimizerskip_scan_enabled
optimizersortmerge_join_inequality
optimizersqu_bottomup
optimizerstar_tran_in_with_clause
optimizersystem_stats_usage
optimizertable_expansion
optimizertransitivity_retain
optimizertry_st_before_jppd
optimizerundo_cost_change
optimizerunnest_corr_set_subq
optimizerunnest_disjunctive_subq
optimizeruse_cbqt_star_transformation
optimizeruse_feedback
orexpand_nvl_predicate
orderednested_loop
parallelbroadcast_enabled
partitionview_enabled
pivotimplementation_method
prerewrite_push_pred
predmove_around
pushjoin_predicate
pushjoin_union_view
pushjoin_union_view2
pxminus_intersect
pxpartition_scan_enabled
pxpwg_enabled
pxual_serial_input
queryrewrite_setopgrw_enable
removeaggr_subquery
replacevirtual_columns
resourcemanager_plan
rightouter_hash_enable
selfjoinmv_duplicates
sqlmodel_unfold_forloops
sqltunecategory_parsed
subquerypruning_enabled
subquerypruning_mv_enabled
tablescan_cost_plus_one
unionrewrite_for_gs
unnestsubquery
usecolumn_stats_for_functionI just came across a similar case: 1 (just one) of our (RAC-) databases has 130-something underscore-parameters set to non-default values.
version is still 11.1.0.7 (e.g. not 11gR2).
All of those hidden parameters seem to be CBO related (list on request).
Weird is: Only one of our (very similar, supposedly same-config) databases have these hidden parameters set.
Colleagues justly wonder: Who, When, What has caused these parameters to be expliclty set for this one system?
Note: we do not have the complete history of this system documented (systems have been managed by 3 different parties already).
It is quite possible they came in with some patch or upgrade (catupgr?) somewhere between 11.1.0.1 and 11.1.0.7, but a confirmation would be nice.
Information welcome.
System info:
Linux hostname 2.6.18-164.9.1.el5 #1 SMP Wed Dec 9 03:27:37 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Versions
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected. -
hi
I am dong (just started few days back)10g OCP (DBA).
i love to play with it lot.so i installed 11gr2 db version first.then i deleted the db orcl using dbca.NOW i am trying to install RAC..if i install RAC and create a db or restore a db from taking backup backup from a 10gR2 single instance(actually my institute run this db) db using rman.what would be the case?
will this db use the all the fetures of RAC 11gR2 or it will be just a single instance db by default OR do i really need to run rconfig after restoring it?
what it would be if the backed up db not using ASM?
My assumption is the 11gR2 will fail to restore the 10gR2 db.OR my be some parameter need to be change in spfile.
plz suggest
regardsdamorgan wrote:
You can not create a RAC cluster with the hardware you likely have.
Describe in detail hardware, operating system (w/ version), shared storage solution (and sharing the C drive in not an acceptable answer, and cache fusion interconnect solution.For RAC i have x86_64 two machines running with OEL5.4 /OEL5.2 ( and planned for using ASM).
>
For someone just learning Oracle I would recommend that you not even think about RAC for 2-3 years. You jumping into RAC is roughly equivalent to a student pilot deciding they want to fly the Space Shuttle. It isn't going to have an attractive outcome.do not get scares i am trying at my home.
First of all i would like to say:
............can you describe the thing theoretically?
in my case the incorporation is from win xp 32 (my institute runs by win xp 32bit )to oel 5.4 x86_64.that is the db of which i am taking backup is running under win xp and 10gR2 NOW i am restoring it under 11gR2 which is running under OEL5.4.
what will be the case?is it possible or not?
[as per i can remember the OCA stuff if i took the control /datafile/spfile file os level backup(ie.just copy-paste method ) and just try to restore it manually it may work--probably one of my friend did so(if my memory saves) ]
Another thing is that do i need to change something in spfile?if i can remember my OCA stuff well ,the Spfile probably stores some version information of the database release.so it should be changed or not?
regards
NB:- Actually i asked to my OCP instructor.he said it is not possible even from single instance backup and restoration if it is the case from 10gR2 to 11gR2 using rman.I just want a experts suggestions.... -
Hi,
I can to install both the version of Oracle DB 10GR2 and 11GR2 ?
Thank You
Gaetano883279 wrote:
Hi every one..
I have very few knowledge on linux.
I have downloaded the two linux_11gR2_database_1of2 and linux_11gR2_database_2of2, and I have followed so many forums installation process
but somewhere my linux is getting crashed, each time I am deleting the vmware linux installed and re installing that...
Please let me know the steps as I am a biginner to install this.
Thanks in advance ....
:)Pl do not hijack another post as it is considered to be rude - pl create a new thread for your issue.
In order to get the help that you need, it is best to provide as much specific info as you can. What you have essentially stated is - "Help ! My car won't go ! How can I make my car go ?".
The more specific details you provide, the better the quality of the responses
HTH
Srini -
Using Oracle SE RAC 10gR2 or 11gR2 on NetApp NAS
Hi,
I'd like to know if Oracle certifies Oracle SE RAC 10gR2 or 11gR2 on NAS storage like NetApp FAS2552A dual controller, 24 x 900 GB SAS, 8x 10GbE + 4x 1GbE, 7-
mode, iSCSI, CIFS, NFS, FCP.
I have read some documents by Oracle and, in my opinion, it seems that the best approach is: NetApp NAS with iSCSI.
Reading NetApp documentation it seems that NetApp NAS has a proprietary protocol to manage storage (ONTAP ?).
Is the NetApp approach to manage storage for Oracle RAC a certified solution ?
Thank you very muchI run Oracle RAC on NetApp without any problems. I suggest you work with NetApp. They will be able to answer questions about their specific hardware. They also have documentation on how to configure their disk solution specifically for Oracle RAC databases.
HTH,
Brian -
Help needed in 10gR2 to 11gR2 EBS Database Upgrade
Hi,
I am upgrading EBS Database from 10gR2 (10.2.0.3) to 11gR2 11.2.0.3. While going through Oracle Note Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1], under the point 3 of "Recommendations from Source database" it says:
"Disable the custom triggers that would fire before/after DDL and enable them after the upgrade is complete."
I want to know is it compulsory to disable the custom triggers? If yes then how can I get the list of those custom triggers and disable/enable them before and after the database upgrade?
Please let me know the commands. My operating system is Oracle Enterprise Linux 5.8.
Thanks,
AbdulHi Srini,
Thanks for the docs.
EBS version is R12 (12.0.6) and 10gR2 (10.2.0.3).
Currently I am only upgrading EBS Database from 10gR2 (10.2.0.3) to 11gR2 (11.2.0.3) and want to use it with my current R12 version.
Currently I am following these Oracle notes:
- Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1]
- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 [ID 1058763.1]
I hope I am on the right track?
Regards,
Abdul -
Upgrade from 10gr2 to 11gr2 - error during impdp
Current server is 10gr2 on windows 2003 64 bit, running TDE. On the new server, I've copied the wallet to the new server, opened it using the alter system set encryption wallet open command. Verifed it's open. When I run impdp on the 11gr2 server, I get a ton of these errors:
ORA-39083: Object type INDEX failed to create with error:
ORA-28374: typed master key not found in wallet
Failing sql is:
CREATE INDEX "BANK"."RTXN_DX29" ON "BANK"."RTXN" ("RTXNTYPCD") PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "INDEXES" PARALLEL 12
Followed by a ton of errors like this
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-02270: no matching unique or primary key for this column-list
Failing sql is:
ALTER TABLE "BANK"."ACCT1099M" ADD CONSTRAINT "ACCT1099M004" FOREIGN KEY ("PARENTACCTNBR", "PARENTRTXNNBR") REFERENCES "BANK"."RTXN" ("ACCTNBR", "RTXNNBR") ENABLE NOVALIDATE
Any ideas? I'm doing my practice runs for the real upgrade, which is this weekend, and I've had several successful upgrades, but this time I can't get past this error.I do not have any experience with TDE, but see if MOS Doc 1260584.1 can help
HTH
Srini -
Hi Guys,
Wish u all a very happy new year.
We have upgraded our Client UAT system on solaris 10 from 10gR2(10.2.0.4) to 11.2.0.3 with latest PSU patch 11.2.0.3.8 Solaris SPark 64 bit.
Post DB upgrade new parameters have been incorporated into the system namely
1. Memory_Target
2. Memory_Max_Size.
Now although we have our SGA and PGA set to some specific values in our system, what i want to know is how can we utilize the Two parameters i named above in the system and
how can it provide me better performance in relationship with SGA and PGA set in the system.
Probably on what concept does Memory_Target and Memory_max_size parameters work in 11gR2 system.
It would be really great if some one can provide the details with explanation.
Your help is appreciated.
Regards,
Milan Rathod.Hi,
Automatic Memory Management(AMM) was introduced in ORACLE 11g to automate the size of SGA and PGA(takes full control of managing memory)
To configure AMM ,need to initialize MEMORY_TARGET and MEMORY_MAX_TARGET parameters.
MEMORY_TARGET:
The amount of shared memory available for Oracle to use when dynamically controlling the SGA and PGA.
This parameter is dynamic, so the total amount of memory available to Oracle can be increased or decreased, provided it does not exceed the MEMORY_MAX_TARGET limit. The default value is "0".
MEMORY_MAX_TARGET:
This defines the maximum size the MEMORY_TARGET can be increased to without an instance restart.
If the MEMORY_MAX_TARGET is not specified, it defaults to MEMORY_TARGET setting.
Let say If you are setting MEMORY_MAX_TARGET=2GB, then oracle will use these 2GB to manage the memory(Boh SGA and PGA)
If you set db_cache_size=1GB based on your requirement , then AMM always retains this 1GB memory for db_cache_size and it will use the remainng 1GB memory for other processes. -
Enviroment variables after upgrade 10gR2 to 11gR2 grid
Hello,
Oracle teaches us (for example, in appendix F "How to Upgrade to Oracle Grid Infrastructure 11g Release 2") that before upgrade you must unset such variables like ORACLE_BASE, ORACLE_HOME, ORACLE_SID etc. So, I did it, upgrade from 10gR2 clusterware to 11gR2 grid was succesful. Now I couldn't find any info, must I restore back these variables, or what must to do with them. For example I couldn't run anything from the new grid home ("command not found"), because CRS_HOME was unset, must I just add new grid home to PATH ?Execute the below command at OS level and verify from which home is the crsctl utility is being called
which crsctl
Ensure that the above command is being called from the correct home
If the path from which crsctl utility is being called is the correct one, then perform starce on the crsctl command and verify the starce output to check if it truly is using 10g binaries or not
If not, then try unlocking and locking the GI binaries using "rootcrs.pl -unlock" (to unlock) and "rootcrs.pl -patch" (to lock the binaries), once done verify if you are still getting the same issue or not
Regards,
Vandana - Oracle -
Upgrade 10gR2 to 11gR2 with apps 11.5.10.2 - Please help with rpm package
Hi
OS : Oracle Enterprise Linx 4 update 5
DB: 10.2.0.4
Apps: 11.5.10.2
I am upgrading my current 10.2.0.4 db with 11.5.10.2 apps TO 11.2.0 db and apps 11.5.10.2
When I am installing 11g software only. I am getting the following error
Package: ocfs2-tools-1.2.7
it says this is prereq for 11g and also shows actula value ocfs2-tools-1.2.4.-1
I have installed ocfs2-tools-1.2.4.1 from my oel 4 cd. Problem is it is expecting ocfs2-tools-1.2.7-1
I have searched everywhere on oss.oracle.com and google. did not find ocfs2-tools-1.2.7.-1 package , can anyone please help me.
same issue with glibc-2.3.4-41 package
expected value = glibc-2.3.4-41
actual value = glibc-2.3.4-2.36
ThanksSrini,
Thanks your reply
It says I need to register. So , is it paid site or how to complie my own rpm from source with public key which is mentioned on the website
Oracle's Enterprise Linux: OCFS2 Tools 1.2.7-1 packages for EL4 and EL5 are available on the Unbreakable Linux Network. Subscribers can upgrade to this release by issuing the following command:
$ up2date --install ocfs2-tools ocfs2console
What is this up2date, when I run that it is asking for username and password. Please give me instructions.
Thanks
Rao -
Migrating from 10gR2 to 11gR2 using impdp with network_link fails
Hi,
I'm trying to migrate a database from 10gR2 (Novell SLES 10) to a new server (Novell SLES 11) with 11gR2. I created a database on the new system with all required users and tablespaces. Then I used impdp in 11g with a database link to the source database:
impdp system/pw@db NETWORK_LINK=X_SourceServer FULL=Y
This command fails immediately with ORA-39113: unable to determine database version. Even using the parameter VERSION=10.2.0 doesn't change the result.
The Oracle Upgrade Guide tells me that upgrading is possible from 10* to 11* and recommeds impdp and network link. Is the failure perhaps a bug in the NETWORK_LINK procedure? Should I better try expdp on the source and impdp on the target with a dumpfile as intermediate (the database ist rather big, so dealing with files across the network will take a lot of storage capacity)?
Has anyone tried this method with success?
Thanks
Friedhelm
Edited by: user8964905 on 02.09.2011 02:34This is due to an bug. The workaround is in the DOC
IMPDP From 10g TO 11g Gives ORA-39113, ORA-4052 & ORA-6544 PL/SQL: internal error, arguments: [55916] (Doc ID 1062428.1)
Maybe you are looking for
-
Question about retina display on the New Ipad.
I know when it comes to big screen tv's. The rule of thumb is that only if it's 50 inches or more that you get the benefits of 1080p. It would stand to reason that you wouldn't be able to tell the difference on a 9.7 inch screen. Any thoughts? As the
-
How Do I Include Frame Lines In Exported PDF?
I've created a layout template using rectangle frames. I want to use File > Adobe PDF Presets > [Press Quality] to export a pdf version of the layout. However, when I do that, I am not seeing the frame lines. I have checked, Include.. "Non-printing O
-
Illustrator CS5 - why can't I drag my document window to a larger view?
When trying to expand my document window by dragging a corner, upon letting go it snaps back to an even smaller window view. It is driving me crazy, is anyone else experiencing this? (I use a Wacom tablet, too.)
-
How to syn Iphone 5 with my computer to download photos
How to syn Iphone 5 with my computer to download photos from my pc with windows 7 to Iphone 5
-
I have this error when download itunes 10.5
To quote.... "An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32".version=8.0.50727.6195.publicKeyToken="1fc8b3b 9a1e18e3b"processorArchitecture=x86"". please refer to help and support for more information. HRESULT: