Rolling back the bios

Is there an easy way to downgrade the bios? I've tried following the instructions given on the archives section of this site to no avail. Would like to go from 3.6 to 3.3 on my system.
Athlon XP 1800+
K7T266 Pro2
256 SDRam
300 Watts PSU
Radeon 850
Windows XP
2x40GB HDD

Hey there,
What OS are you running....since it does depend.
Try doing it from the hard drive...it's less risky.
Go by the instructions on this link:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=69&boardid=8&styleid=1
P.S. - The zipped bios files are on the MSI site. Ater they
are unzipped it will contain your BIOS file the BIOS Flashing utility and the .DOC to tell you some more
handy info.
Let us know how it goes.
Again these instructions will give you the
FAT standard of Flashing ie 95,98,SE, ME
or NTFS NT, 2000 and so on
Hope that helps
Sladeiix980

Similar Messages

How do I roll back the BIOS update on Satellite U400-157?

I recently updated a Tempro alert for BIOS update for the note book. I now notice that the screen blanks out a few times at PC start up. It was't there before. How do I roll back the BIOS update to an earlier one.
I don't get to see the BIOS update screen else where other that the time that I did the BIOS update.

Hi
To be honest I dont understand exactly what is your problem.
You said: . I now notice that the screen blanks out a few times at PC start up.
What does this mean exactly? Is your display black until Windows has booted up?
To be honest, I dont think that BIOS update would be the reason for that go to BIOS (press F2) and set the BIOS to default settings (F9) and save the changes (F10).
If you want to get back the earlier BIOS version, then you will need to flash the BIOS ROM module using an DOS based BIOS version. On the Toshiba European driver page you can find only the win-based versions

How to "roll back" the model if a database update fails

I'd like to know if there's a way to "roll back" the model (the values in the managed beans) if a service call to a database fails during the Invoke Application phase. My understanding of the JSF lifecycle is that the values in the model are updated before a service call to a database would happen. If the database update operation fails, it seems to me that the data in the model and the database would be inconsistent.
For example, say I have a ridiculously simple application that updates a names database. The fields are id, last name, first name. The application has a simple view that allows the user to update a name in the database. The user updates the last name field for a particular record from "Doe" to "Smith" and clicks "submit". The request goes through the lifecycle, the model values are updated from the web form during the Update Model Values phase, then the call to update the database fails during the Invoke Applications phase (the database connection failed). When the Render Response phase completes, the UI would display an error message where I put <h:messages> but the last name value in the UI would show "Smith" instead of "Doe". Is there something I can do to roll the model value back to "Doe" if the database call fails?
I know that I could redirect to a technical error page, but I'd like to avoid it unless it is the best thing to do.
I'd appreciate any advice you can offer.
Thanks.
- Luke

I'd like to know if there's a way to "roll back" the model (the values in the managed beans) if a service call to a database fails during the Invoke Application phase. My understanding of the JSF lifecycle is that the values in the model are updated before a service call to a database would happen. If the database update operation fails, it seems to me that the data in the model and the database would be inconsistent.
For example, say I have a ridiculously simple application that updates a names database. The fields are id, last name, first name. The application has a simple view that allows the user to update a name in the database. The user updates the last name field for a particular record from "Doe" to "Smith" and clicks "submit". The request goes through the lifecycle, the model values are updated from the web form during the Update Model Values phase, then the call to update the database fails during the Invoke Applications phase (the database connection failed). When the Render Response phase completes, the UI would display an error message where I put <h:messages> but the last name value in the UI would show "Smith" instead of "Doe". Is there something I can do to roll the model value back to "Doe" if the database call fails?
I know that I could redirect to a technical error page, but I'd like to avoid it unless it is the best thing to do.
I'd appreciate any advice you can offer.
Thanks.
- Luke

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?
The notice is inserted first and the stopping point is second.

Da ich gar kein Englisch kann kann ich auch nicht sagen was sie mir
geschrieben haben ich kann nur Vermuten was das sein soll es tut mir leid
aber ich kann ihnen keine Konkreter Antwort geben alle Sprechen Englisch
nur ich nicht mehr kann ich dazu nicht sagen
Constantin Preda
2015-02-12 21:45 GMT+01:00 Claudio González <[email protected]>:
The install wizard stops and "rolls Back" the install and just gives
the attached notice of the install error...how can this be corrected?
created by Claudio González
<https://forums.adobe.com/people/Claudio+Gonz%C3%A1lez> in Adobe Reader
- View the full discussion
<https://forums.adobe.com/message/7189357#7189357>

Roll back the updated records

One of our application users accidently updated approximately 1000 records of one of our Production Database tables .There are 3-5 records usually added /modifiled to this table per day .we also
restore a copy of our production database to Test server each night .In this situation, we wanted to roll back all transactions for that table those are updated by user accidently
so we decided to rename the production table and tried to copy table to production from the test database .Unfortunally
we could not rename the table name since there are a few production database tables are dependent on that table .Finally we compared the affected records of production table
with Test database table and created update script that updated all affected records with the original values .This recovery step was very time consuming especially during the business hours . when someone accidently delete ,update and modified
data , in this case what would be the possible options that SQL DBA can use to roll back the transactions without any downtime ?
Has someone used the ApexSQL log against the Production database to recover data before ?
Thank you in adavance for you help .
Daizy

Always prepared for a rollback steps (Scripts ), and make sure you have scheduled backups ( full and tlog )
If you know the exact time then you may try for point-in-time recvery using your full_tlod backup.. for this you should aware the exact time and again you have to do some manual work, because this is unplanned and human mistakes always risky and etc.., You
have to make sure that you are executing correct scripts and you may have to test the same in Test servers before executing.
Not sure how this ApexSQL works for rollback... you may have to test using your Test servers
WITH FILE=5, NORECOVERY, STOPAT = 'Apr 15, 2020 12:00 AM';http://msdn.microsoft.com/en-us/library/ms179451.aspx
Raju Rasagounder Sr MSSQL DBA

Element 9 error "Rolling back the installation of Elements 9" failed.??

I just bought Elements 9 for Windows. And anytime I try to download it, it says "Rolling back the installation of Elements 9" then says "shared technologies failed"?
I have tried multiple things listed on here and nothing helps.
Does anyone know how to fix this??
Thanks~!

Hello,
I noticed that there is a log we can refer to:
C:\Windows\CCM\Microsoft.ConfigurationManager.AssetProvider.InstallLog
Since the client software is not installed successfully, I'm not 100% sure if the folder persists.
In addition please check event log. Pay attention to those logs regarding WMI.

Roll Back the Sales Order After Adding

Hi Experts,
I want to roll back the system form trasaction like Sales Order. After adding the Sales Order immediately i want to roll back the transaction.
I used the Company.Transaction Object, but it is only working on User Tables. Not in System Forms like Sales Order.
Can you please tell me the solution for this ASAP.
Thanks in Advance,
G.Suresh

Hi Petr,
You didnt get my point. In my concern is, i am going to add Sales Order by Manually not using code.
In FormDataEvent of the Sales Order
            Select Case BusinessObjectInfo.EventType
                Case SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD
                 If BusinessObjectInfo.ActionSuccess = True Then
/***** This Code for getting current transaction of the Sales Order *****/
                        Dim oObject As SAPbobsCOM.Documents
                        oObject = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
                        oObject.Browser.GetByKeys(BusinessObjectInfo.ObjectKey).
/**** here i want to rollback the saved sales order ****/
                End If
              End Select
Can you tell me, how i ll rollback the already saved transaction which added by user from Sales Order Screen not in code.
Thanks in Advance,
G.Suresh.

Roll back the last update

How can I roll back the last Firefox update on Feb 27th 2013. I really don’t like the built in PDF Viewer. I like it the way it was.
Thanks
Jay

Thanks
I set the Portable Document Format (PDF) to use Adobe Acrobat (in Firefox). It worked great, it works just like it did before the update.

Rolling back the journal in General Ledger

Hi All,
We are in 11.5.8 version.
There is a journal came from inventory (physical inventory process). Since the
account code combination is wrongly entered we want to correct the entries
from inventory and then post to GL.So is any way to roll back the journal and
then we can modify the code combination and then we want to create accounting
once again so that a new journal will be created.
Is any way to do this..
Awaiting the reply
Regards

Hi Dash,
Thanks for the reply
And the inventory transactions are huge in numbers. also the wrong code combination are given at the time of physical inventory process. so only we are trying to roll back the journals.
But we thought of trying to change the code combination from backend and in general ledger also. I have asked for the technical person to identify the tables and the links involved in this process.
anyways thanks alot
Regards

Can a Rejection in an Approval Step roll back the data from table

Hi All
We are using the BPC 7.5 MS Version SP 4 for Quantity & Sales Planning.
The main drive dimenion is the Material Dimenion whiich is having almost 65000 member id's and increasing.
I have a situation where the a High Level Planner Input some quantity and it allocated down at Material Level.
When the Surbodinate Planner under the High Level Planner looking at the allocated value, he has the option to change the quantity.
But after he make the changes to quantity and send the data to the data base, the High Level Planner can accept the Change or Reject the change.
If the High Level Planner Reject the change, make by the Subordinate Planner, the Data will Roll Back to its original value, meaning the Data Submitted by Subordinate Planner will be deleted from the table and the earlier Value from the High Level Planner will show.
Is this kind of facility available in BPC 7.5 MS Version of Rolling Back the Data already comiited to the data base.
Looking forward to hear from you all on the same.
Regards
Krish

One idea will be that you have to insert the users like dimension into BPC. This will be probably the way how you have to design your application.
In this way probably you will be able to simulate this behaviour.
Any way I will come back to your request.
Why the roll back it wil help?
May be the reject is just for planning of one material why do we have to roll back everything planned for other materials?
Other idea for implementation is related to what means the approval and reject. Are we speaking about work status or are we speaking about another type of approval.
It is not a simple discussion. We have to speak about detailed reguirements and function by that it can be easy achieved this behavour requested.
Regards
Sorin Radulescu

Apple company. Most of iPhone 4g phone users complain about the OS7. Set as a survey of users of iPhones 4g to roll back the OS 6.1.3. Apparatus doesn't work as has to work. Constant lags am feeling it is not iPhone. It is Android or is worse than

Apple company . Most of iPhone 4g phone users complain about the OS7. Set as a survey of users of iPhones 4g to roll back the OS 6.1.3. Apparatus doesn't work as has to work. Constant lags am feeling it is not iPhone. It is Android or is worse than the Chinese phone.

Apparatus doesn't work as has to work.Constant lags am feeling it is not iPhone.It is Android or is worse than the Chinese phone. Phone simply brakes... to it чото doesn't suffice

My HP Computer wont install itunes 10.5. it stalls at 'publishing product information' then rolls back the installment

My HP Computer wont install itunes 10.5. it stalls at 'publishing product information' then rolls back the installment. I am running on windows 7.

hi Katrina!
IF you are running DCOMCNFG to fix something, does that mean you got an error 1607?
here's what i think is going on with this poor chap.
our "publishing product quit"/1607 KB doc got revised on 31 january 2006:
iTunes for Windows installation quits while publishing product information
... and there's now an alternate set of treatment possibilities given in there for XP home users. people are being linked to the DCOM settings tip over at InstallShield:
Configure the DCOM Settings on Your Computer
so i think here that our OP has a "publishing product information" quit version of this problem, and followed up on that link, which is why DCOMCNFG got mentioned.
love, b

How to roll back my BIOS from f.63 to f.56

Few days ago, I updated my BIOS to f.63. And I need to roll back it to f.56.
Yesterday I contact with technician Fred, he told me to find help in this page :http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&cc=us&destPage=document&jumpid=reg_r10...
And I follow the steps, and use sp66269.exe, copy the file into my USB.But when I insert USB and try to open computer with win + B ,then the POWER button, the screen led just flash, screen was black.
Then I entered Hardware Diagnostics, try to use roll back function, but it only told me "unable to open BIOS signature file"
or "the BIOS is not compatible for this machine".
Then I found a page http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_...
I downloaded the 2-in-1 USB key, but it doesn't work, maybe I made some mistakes.
What should I do now?
Thanks.

Sorry, my machine is Envy 17 j184nr.

Is there a way to roll back the 725 update?

I have the IdeaPad K1 and I guess I got an early version that had stock Honeycomb. Netflix was not preinstalled but I was able to download it from the Lenovo appstore no problem.
Well this morning Lenovo pushes an update to my tablet and now my stock Honeycomb has some horrible overlay. The Standard Honeycomb icons for back, home and recent apps have been replaced with ugly white icons and I have a stupid chat bubble icon in the bottom center that opens a favorite apps wheel. Not only is this wheel unessecary, the chat bubble icon doesn't even make any sense and is ugly and obtrusive.
I don't want any of this crap. I want my old tablet back. I want stock Honecomb back. I'm assuming they flashed the bios with this update because performing a factory restore just takes me back to this new operating system.
Is there anyway to roll back to the system before this horrible update? I want the tablet I bought not this junk.

I wish I could revert back as well, the theme is an eyesore. I rarely use my k1 for that reason. I still keep it hoping that the next update will fix it.
I will probably sell it if they don't update soon, its a shame, its a well built device, that lenovo had to go and ruin

HT5318 Itunes 10.6.3 will not install in my computer. It says that it has found errors and is rolling back the install. What can I do? My laptop is also win7 and it did install there.

I have a Windows 7 OS 64 bit, ZT desktopcomputer with 16meg memory. I have not been able to install any updates
to itunes to my computer. It downloads, but then when installing, it looks like it is going to complete the install
and then it rolls back and says the errors occured and to try again. I have a win7 64bit HP Laptop that installed
the itune updates with no problem. I have to sync my iphone to my Laptop as it will not work with my desktop.
Please advise.
Thanks,
Roger

Do you have any other drive connected, which has a copy of FCP X?
I would make a copy of the application in some drive, just in case; then disconnect the drive, delete the application (could use FCS Remover to delete everything related).
Then, try installing from the purchases tab in the App Store.

Rolling back the bios

Similar Messages

Maybe you are looking for