Rolling Out Groupwise with Zen, Ico not shown

Hi folks,
we are rolling out Groupwise, based on batchfiles.
This ZenPacked is working ... in the half of time.
Sometimes the packed isnt shing in the zenapplications but all rewquirements
are OK.
Some Ideas ?
Thanks
Thorsten

Thorsten,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Problems with Zen MIcro not turning on or

I have a problem with my Zen Micro not turning on or off. The only way to turn it on is to plug it into the power or USB cable :-(
I have done a quick search and the posts that I have found on this topic suggest that I will need to send it back to Creative! Anyone found a "magic" solution for this problem other than sending it back?
I have done a firmware upgrade just in case that would solve the problem but unfortunately it did not.
What with this problem and the earlier problems I had with battery life I am thinking of sending the thing back and going for a different Creative player. The Zen Sleek seems to have a good range of features ... anyone had any good or bad experiences with the Sleek?
Any comments appreciated.

well..unfortunatly i have had this same problem. i made a topic about it and some of u may have read it..i can't seem to find it now. but i have found the resolution to this problem..send it back! i baught my from circuit city..i just got home from there..very nice guy helped me out at the customer service counter. grabbed my receipt,all the contents it origionally included and the box and headed to circuit city. i did exchange the zen micro for another zen micro. we both converstaed with eahochter about how i have heard other ppl complain about this problem. creative needs to do there homework. hopefully it won't happen to me again.

I AM STUCK WITH MOZILLA FIREFOX / NOT SHOWN ON MY LAPTOP SCREEN / USING HUGE AMOUNT OF RAM IN GENERAL - CAN YOU HELP????

Hi,
I have copied these problem on you site, as I could explain better then what they did, wich my problem remain the same as they have. And part me explaining what is really happen to my Laptop.
''Mozilla/Firefox 4 will not SHOW on my computer SCREEN.
Firefox won't load onto my computer. I have Windows 7, and each time I try to run the program to install it, it tells me I have another version still waiting to be installed that requires my computer to reboot. When I check "yes" to reboot, my computer reboots but still no Firefox. When I try to uninstall the the old Mozilla program from my Control Panels, there is no Mozilla files or programs listed not in my list of programs but when I go directly to the Windows File on the C: Drive, there's a Mozilla program file there. WHen I go into that file check, I attempt to open the uninstall program. I get an error message that says something to the effect of: "the version Mozilla on this computer is not compatable with my OS." Something about it being and 86bit program. My Firefox 3.6 worked fine 2 days ago. What's wrong??? ''
'''Firefox 4 using huge amounts of RAM on sites with Java scripts
I have been observing Firefox using huge amount of RAM when I am on sites that use Java Scripts to rotate images. I have tried a couple of different sites and have monitored the RAM usage. With Java script enabled Firefox 4 continues to grow its RAM usage by about 10MB a minute. I have had the usage hit as high as 1.5GB. As a comparison I have monitored the same sites in Internet explorer and have not seen the same issue. - Just to eliminate a site issue.
Turning off Java Script solves the issue and eventually frees the RAM.
I am using XP Pro, 3 GB RAM. '''''
My experince with Mozilla Firefox:
Here what really happen when I install the Mozilla Firebox on my La[top you can see the file is there but when I click the program to open its does not shown on the screen but when I check with WTM (Windows Task Manager) its shows that is ON and you can only witness the laptop going very slow and I have to reboot it, and I can not install any other Mozilla :( because of the same problem and all the above.
I really need Mozilla to work as soon as possible due to important deadlines I have pendent, and i can only use Chrome but is not my ideal program. Can you help me , please ?????
Thank you
Vitor Mendes

If it opens in safe mode, you may have a problematic add-on. Try the procedure in the [[Troubleshooting extensions and themes]] article.

Displaying ALV agan with deleted record not shown....

Hello Gurus,
I am working on ALV. The ALV deipalys data froma custom table. Now I have created a Button in application toollbar saying 'Delete'. I have wrirren logic in 'ALV_UC (i_callback_user_command) so that when user pushes 'Delete' button, the data record gets deleted from custom table.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = lv_progname
            i_callback_pf_status_set = 'ALV_STAT'
            i_callback_user_command = 'ALV_UC'
*            i_callback_top_of_page   = 'TOP_OF_PAGE'
            is_layout                = is_layout
            it_fieldcat              = field_lst
*            is_variant               = g_variant
            it_event_exit            = gt_event_exit
            i_save                   = 'A'
            it_sort                  = it_sort
            i_screen_start_column    = i_start_col
            i_screen_start_line      = i_start_ln
            i_screen_end_column      = i_end_col
            i_screen_end_line        = i_end_ln
       tables
            t_outtab                 = p_outtab
       exceptions
            program_error            = 1
            others                   = 2.
Now, I want the ALV to be dsiplayed with that deleted record not shown. How can I do this ? Is there a Refresh function or something ?
Thanks.
Regards,
Rajesh.

Hello Rajesh
A quick view into the documentation of IMPORTING parameter I_CALLBACK_USER_COMMAND would have answered your question:
Within the USER_COMMAND callback routine set
REFRESH = 'X'. " That's all
EXIT routine for command handling
   Description
     Passing an EXIT routine indicates to the ALV that the application wants
     to respond to certain function codes.
     Generally, these are function codes that are unknown to the ALV (that
     is, are not standard ALV functions) and that were defined and set by a
     user status.
     See also the documentation on parameter I_CALLBACK_PF_STATUS_SET.
     The interface of the form routine specified must be defined as follows:
             FORM user_command USING r_ucomm LIKE sy-ucomm
                                      rs_selfield TYPE slis_selfield.
     Parameter R_UCOMM contains the function code triggered.
     Structure RS_SELFIELD contains the following information:
     o   tabname : Name of the internal output table
     o   tabindex : Index of the internal output table
     o   fieldname: Field name
     o   endsum   : Cursor is located on the totals line
     o   sumindex : If >0, the cursor is located on a subtotals line
     o   value    : Value of the field on the list
     o   refresh : (Exporting) List should be set up again
     o   col_stable:(Exporting) Keep column position when list is set up
         again
     o   row_stable:(Exporting) Keep row position when list is set up again
     o   exit      :(Exporting) Exit list (and ALV)
     o   before_action: Call before standard action execution
     o   after_action : Call after standard action execution, before list
         setup
     o   ignore_multi : Internal use
     o   sel_tab_field: Internal use
     The EXIT routine is called whenever a function unknown to the ALV is
     triggered or if the routine call before/after the execution of a
     standard function code has been defined by interface parameter
     IT_EVENT_EXIT.
     See also the documentation on parameter IT_EVENT_EXIT.
     The function code and the current cursor position are then passed on to
     the calling program through the EXIT routine.
     If the user has selected multiple rows by selecting checkboxes, the
     output table field designated as the checkbox contains the current state
     of the checkbox in the list.
Regards
Uwe

Mail; emails with attachments are not shown in Sent folder

Since upgrading to Yosemite I have had lots of problems with Mail.
One is that it seems that some emails with attachments do not show in the Sent folder! Some of them can be found further down, On my Mac in a folder called Recreated letters, or something like that in English.
Anyone have the same problem?
Nina

What is your version of TB? Have you changed anything since the last time it worked? Mail servers changes done by your provider are also possible.
* Does it occur when an e-mail is sent immediately (before a possible auto-save, see below)?
* Can you copy any mail from any folder to the Sent folder?
I've heard of the error "saving to Sent" with older versions of TB, but not related to attachments.
So, for the general saving to Sent error, some people report that this
https://kb.wisc.edu/wiscmail/page.php?id=3679
has helped them.
I've also heard that turning off "Auto save every .. minutes" in TB preferences > Composition > General has helped some in older versions and IMAP.
You may check this page: http://kb.mozillazine.org/IMAP:_advanced_account_configuration
PS: You seem to use Firefox 16, an extremely outdated and insecure browser version. Same for Thunderbird? To be on the safe side (bugs, security), IMHO you should really upgrade regularly to the latest versions, of course backing up your profiles first, especially with TB ( http://kb.mozillazine.org/Profile_backup ).

Help with Zen Xtra not connect

Hi,
I have read all of the FAQs and posts reguarding this problem and I just can't seem to get this to work. I have a Creative Labs Nomad Jukebox Zen Xtra 40GB mp3 player. I downloaded and installed the playsforsure firmware yesterday so the mp3 player would be compatible with my Xbox 360. I moved all of my songs from the player to the Creative Mediasource PC music library before the install (sadly, I lost all of the music the Zen cam with). Well, after I installed this firmware, and I plug the Zen Xtra into the computer with the USB cable, it doesn't register that it is connected. For example, when I open the Creative Mediasource PC music library it doesnt have the Zen Xtra listed like it used to, so I cannot put any files back onto the mp3 player, also the Nomad explorer has the Zen listed as "not connected" and same with the Zen Xtra Media Explorer. I then downloaded a new playsforsure plugin for Creative media source and the most updated driver. Still noting... I tried going into device manager, it recognizes the portable media device without any problem, so its not the USB or the computer, its that its not connecting with Creative Media Source, Nomad Explorer or Zen Xtra Media Explorer. I clicked the driver, followed all those steps that were listed in one of the posts on this forum and installed the MTP device. It actually connected this time and I started moving my music back onto the player. Well, I accidently "x'ed" out the program and I went to Creative Media Source again but its not registering the device again. I retried instaling the MTP device again and it didn't work this time. I restarted the computer and tried again but I cannot get this Zen connected anymore. I have never, ever had a problem like this before with my Zen until I got this firmware. Please, if anyone knows what I am doing wrong, please help. Thanks.
--Frank

I believe you are not holding it down long enough----- I think in the manual it says to hold it down until rescue mode comes up..... it took a long tome for mine to come up when i did it
If holding it longer doesnt help, thats all i got

URL iView with KM Content not shown in Page - just a "thin line"

Hi,
I just created two URL-iViews which point to documents in the Knowledge Management Repository.
Content Admin --> Preview --> Works out --> Hooray!
I created two pages for the corresponding iView and deltalinked the iViews in. At this point I want to add I'm not doing this the first time, I have a few dozen KM-Pages here and they all work and are all set up with the exact same properties.
Content Admin --> Preview --> and THIS is what happens:
http://www10.pic-upload.de/20.02.12/xiswewmyirk.jpg
There's just some kind of thin line showing. I cleared the portal cache and looked for anything unusual in the NWA monitoring traces, but didn't find anything. I didn't find anything related on the forums either, probably because I don't really know what search terms to use for this strange occurence...
Does anyone have a hinch what could be the cause for this paranormal activity?...
Cheers, Lukas

Yes. You are correct. Shame on me..
The pages were configured correctly at FULL but one particular iView was set to AUTOMATIC so although the page was set to full display, the iview in behind was defaulting to automatic, thus this strange behaviour.
Thanks Meera!
Cheers, Lukas

Problem with Zen NX not being recognised by MediaSource Organi

Hi
I was just given my Aunt's old Creative Zen NX player, but she'd lost the disk with drivers etc on it, so i downloaded from the website the following:
Drivers: Creative Zen and Jukebox Driver Upgrade version .30.03
Firmware: Creative Jukebox Zen NX firmware update version .0.02e (For Europe Only) ZENX-FWARE-3-US
Applications: Creative MediaSource Player/Organizer 3.30.2 CMS-WEBUP-9-LB

but when i try to use MediaSource Organiser to transfer tracks from my PC to the MP3 player, it doesn't recognise that the mp3 player is connected. I've searched on the computer for new plug & play hardware, and it recognises that Nomad Jukebox Zen NX is connected to the USB port, but when i re-open MediaSource Organiser it still doesn't have the mp3 player listed in the "Sources" - it only lists "PC Music Library" and "My Computer"

One thing I have noticed is that on the a few of the downloadable files it says "If your Creative MediaSource version is lower than 3.20.57, download and install the latest version before installing this software package." - mine is 3.20.2 but that is the most recent one i can find on the website?
If anyone can help I'd really appreciate it

THANK YOU!!!!
Solved my problem perfectly

RSS feed with duplicates links not shown

I just realized that the RSS reader in Safari does not show entries in a feed which have the same link as some other link. For example:
entry1 - link1
entry2 - link2
entry3 - link3
entry4 - link1
entry5 - link2
will only show 3 entries with the link1 to link3; skipping entry4 and entry 5
Is there any way to force Safari to show all entries in a feed independent of duplicated links?

If you go to this site you will find the google code there.
http://code.google.com/
HTH
Sorry you have already done that, so just edit the code to point to your website, (this is where it says title and url).
Message was edited by: pziecina

Out.println with UTF-8 not working ..

Hi ,
My aim is to see this string on the browser and the encoding must be UTF-8
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.net.*" %>
<%
response.setContentType ("text/html;charset=UTF-8");
out.println(" pr��c��demment ");
%>
And when i see on the browser i see the out put sting corrupted ..like pr��demment
Any thoughts and help in sorting this is greately appreciated ..
Thanx a lot ..
Nag

Sorry the sting which i wanted to out put was
pr�c�dente .....

Budget data with 0 qty not shown in Input schedule

Hi All,
I have a problem that i uploaded sales budget data with material, sold-to with qty to acutal cube. Many of these line items have 0 value in Qty for budgeting purpose which i can see from the back end. However, these lines seems to be suppressed in the Input Schedule and I couldn't find a way to show them.
Any one has a idea?
Many thanks!

Hi nilanjan,
Thanks for the reply. The suppression option has been set to N for both Rows (Mat. and sold_to) but that doesn't help. No sure where to "checking the aggregated values in your listcube", i tried to check/uncheck the option of Mat. aggregration, and DB aggregration option, and in any case i can see the 0 value in the output list.
i even hard coded the Mat Row and sold_to row to individual material and sold_to (which has 0 value of Qty) and refresh the IS, then i got a #NODATA.

Zen Micro not recognized on one PC but is fine with 2 oth

Before I get totally frustrated with my PC, not the new Zen Micro 6g, what could I be overlooking to get the software and the PC to recognize this unit's This PC has Windows XP (no service packs installed), and after restoring system and reinstalling the software, I have the same problem: I connect the Zen to the USB cable, it says "Found New Hardware" and then proceeds to want to reinstall the software and drivers again from the CD. Naturally, it should have picked up the installed software and drivers but it hasn't.
On my other 2 PCs, one with Win XP sp2 and the other, my Toshiba laptop with Windows Media Player 2005 Edition, no problems at all. Immediately recognized the player after installation of the software and drivers.
I am almost at the point of not bothering to install it on the last PC as it works on 2 out of 3 fine but I would like to find out what could possibly be the problem. The two towers are identically set up: same Intel865Perl mbs, same hardware - only difference is the OS.
I have unistalled and reinstalled, system restored a few times, and I give up.
Any ideas are appreciated.

Thanks everyone. Oh, boy, I have a lot to search out, huh? Well, the chipsets are the same. The OS's are different though. I tried the USB from the mb....nothing. I do have an add-in card from Adaptec which is a dual connect card....contains 3 USB ports and 2 firewire ports. Nice card, usually works fine. All my other USB devices such as Canon camera, Sony camera, all work fine from both places. But, it might not like the Zen. Not sure why Zen wouldn't be compatible with an Adaptec USB card but I do know that Windows XP with no service packs does NOT recognize 2.0. just .. And I do get a message that states that I am connect a high-speed device with a non-high speed USB port. If that's the problem, why does it say "Found New Hardware" in the first place? And it does show up in Device Manager when connected, but with the yellow markings. It's listed under "Other Devices", and if I remove it, reboot and reconnect, the same message comes up asking me to install the drivers again.
I could upgrade this PC but I don't think that is going to make any difference, except that it will recognize the 2.0 USB ports.
I'm going to keep trying until I get it right. Any other ideas short of giving up?

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Zen Micro with Windows 2000 Not Recogni

Help!! My computer operating Windows 2000 no longer recognizes my Zen Micro. It used to but no longer. I have searched through all the help loading everything under the sun with no success. My Micro is operating with Version ..0 that I understand should and has worked in the past with W2000.
Please help. This is ridiculous - no Zen here.

I finally figured that out. With ME or 2000, I needed to:
) download the version firmware to my memory stick
2) take the player and V firmware to an XP machine
3) have the older firmware flashed into the player
4) reinstall the player on the ME machine
I did all that, had Best Buy do the reflash, and it's working now.
A few more questions:
If I later update the computer to an XP, any problem with reinstalling Version 2 firmware (other than loosing stored data in the player)?
Exactly how many features are not supported by version firmware? I'm aware that it won't support subscription services, e.g., Napster To Go, and audible format. Are there any other missing I should be aware of?
TIA
JRC

Inserted CD is not shown in Finder, neither possible to load nor to get it out... Any idea?

Inserted CD is not shown in Finder, neither possible to load nor to get it out again...
Restart with pressed left Mouse button or Reset didn't help...
Any idea? Thx

Have you tried using Disk Utility? Utilities Folder>Disk Utility, hopefully the CD will be listed on the left. Select it and then click on the 'eject' butoon.
Edit: If that didn't work, here's a few more suggestions: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Rolling Out Groupwise with Zen, Ico not shown

Similar Messages

Maybe you are looking for