Rolling pixelation in moving photos

Ok so I made my project in FCP and exported it as QuickTime Movie, played it and it looked perfect. But when I put it into DVDSP4 the quality went way down. The still picts weren’t to bad but when there was any sort of motion or movement of the photos it got pixilated and there was an inward rolling effect of the pixels. This was most apparent on a B&W drawn picture. I have also tried QuickTime Compression, and H.264 through compressor, each with about the same result.
Video length 4 min (fairly short, doing some test movies)
Export as QuickTime Movie
SD | NTSC
Encoding-
4:3
Field Order - Bottom
2 Pass VBR
Bit Rate 4.0-8.0
Motion Estimation - Best
If any more info is needed please tell me.
Thanks
-Matt

Pictures and line can drive you crazy.
What you should do is make sure the timeline in FCP is set for best motion/scaling.
Export the movie as 8 or 10 bit uncompressed
Bring it into Compressor and create m2v from there
It should help somewhat, I have cleaned up stuff using this procedure, though of course there are more things to try if needed.

Similar Messages

Moving photos from photo stream to an album

How can I move pictures from a photostream to a album? do i need to move them to the camera roll first?

Moving photos first to the camera roll is the only solution to moving photos to an album...a bit time consuming if you have many photos.

TS3989 My photos on my iPhone 4 are on my camera roll and in my photo stream, but my recent photos have not moved to my photo stream folder on my computer (windows 7). What can I do?

My photos on my iPhone 4 are on my camera roll and in my photo stream, but my recent photos have not moved to my photo stream folder on my computer (windows 7). What can I do?

At 1.3GB available, your storage space is getting very thin no matter what you do further. As long as you have the photo's in the camera roll saved on your computer you can delete them. Just make sure first that they are in your photo software. If updating in iTunes, just backup/sync first, then update, and that will save the camera roll in the backup as well.
At only 1.3GB you eventually are going to find yourself unable to install or update some app, or unable to take any new pictures, or some other limitation that will force you to free up space anyway. So now, before updating, sounds like a good time to make sure everything is backed up or stored somewhere else, and clean house a bit, then update.

How do I free up space on my C drive by moving photos to a separate hard drive on the same pc?

I need to free up space on my C Drive by moving photos to Seagate expansion (H) drive. Currently use Windows Vista and elements 11 where I have organiser containing folders and albums which I want to keep intact after the move. Photos are currently held in C:users, valued customer, pictures. I’m pretty ignorant on how to do this but have tried to read and follow the FAQs and previous advice and think I have some understanding(!) I have made a catalog back up onto a separate Seagate expansion drive (F) and although the files appear to have been renamed as ‘B0000001’ for example, I believe this is normal and I can also see a backup.tly and a catalog.buc file so I’m assuming the backup was successful. I think I need to take the following steps;
1. drag and drop the folders containing my photos from the C drive into the (H) drive. (Does this have to be completed one folder at a time or can they all be highlighted and dragged and dropped in the same action)?
2. As I’m not changing computer then I’m assuming I don’t need to restore the catalog?
3. At this point I won’t have deleted anything off the C drive so how do I ensure the catalog establishes links with the photos that are now on the (H) drive if they’re still on the C drive?
4. Once I know the photos are safely on the (H) drive and all links to the catalog have been established I’ll take a new backup of the catalog onto the separate Seagate expansion drive (F)
5. Do I need to take a separate backup of the photos which are now on the (H) drive?
6. I’ll then delete the photos on the C drive.
7. In future any new photos I take and import into Element 11 organiser, I’ll save on the (H) drive.
Have I got the steps right? Any help would be appreciated as I don’t want to lose anything.
Thanks.

It's much simpler:
Dekka1 a écrit:
I need to free up space on my C Drive by moving photos to Seagate expansion (H) drive. Currently use Windows Vista and elements 11 where I have organiser containing folders and albums which I want to keep intact after the move. Photos are currently held in C:users, valued customer, pictures. I’m pretty ignorant on how to do this but have tried to read and follow the FAQs and previous advice and think I have some understanding(!) I have made a catalog back up onto a separate Seagate expansion drive (F) and although the files appear to have been renamed as ‘B0000001’ for example, I believe this is normal and I can also see a backup.tly and a catalog.buc file so I’m assuming the backup was successful.
Yes, the renaming is normal and the fact you can see a backup.tly file is good. However, even if you are 99% sure that the backup is ok, the only way to be 100% sure would be to restore somewhere else... (being somewhat paranoid!)
I think I need to take the following steps;
1. drag and drop the folders containing my photos from the C drive into the (H) drive. (Does this have to be completed one folder at a time or can they all be highlighted and dragged and dropped in the same action)?
Dragging a master folder also drags its subfolders, no problem.
2. As I’m not changing computer then I’m assuming I don’t need to restore the catalog?
No, no need to do that. When you move (by drag and drop or the move menu) the organizer automatically updates the catalog.
3. At this point I won’t have deleted anything off the C drive so how do I ensure the catalog establishes links with the photos that are now on the (H) drive if they’re still on the C drive?
The drag and drop procedure really moves, that is to say : copies the files to the new location AND deletes the files in the old location. Note that if there is a problem in the file transfer, the original files won't be deleted. The transfer of big libraries can require several hours. That happened to me with a power outage at 95% of the process. The files already copied stayed on the new computer, the original files were not deleted and the database of the catalog rolled back to the initial situation as if I had done nothing. So dragging and dropping is safe, at least on recent PSE versions.
4. Once I know the photos are safely on the (H) drive and all links to the catalog have been established I’ll take a new backup of the catalog onto the separate Seagate expansion drive (F)
5. Do I need to take a separate backup of the photos which are now on the (H) drive?
6. I’ll then delete the photos on the C drive.
7. In future any new photos I take and import into Element 11 organiser, I’ll save on the (H) drive.
Have I got the steps right? Any help would be appreciated as I don’t want to lose anything.
Thanks.
If you take a new backup, it will include all the files recorded in the catalog. If you still have pictures on your C: drive, and possibly others on other external drives, everything will be backed up. You can't specify a backup for images in a given disk, only for all images in a catalog. For instance, you can move only a part of your images on your C: drive. You can add pictures in the drive you want, C: or H:

Using iPad 2 photos and have not found key to organizing or moving photos from one album to another existing album

With ipad2 I have been almost successful in moving photos from the stream or roll to separate albums. It takes the commands but does not allow last step. What am I missing?

If you are wanting to copy photos from your computer to the iPad then you need to select all the folders that you want to copy together in one go - synced photos can't be deleted directly on the iPad, instead they are removed by not including them in the next photo sync, so on each photo sync you need to select all the photos that you want to remain on the iPad. So you will only do one photo sync to copy them.
So when you connect the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes, on the right-hand side on the Photos tab you need to select the parent folder under each those 100 folders are directly under - each of those 100 folders will then get their own album on the iPad. The folder to album relationship only works to 1 level i.e. if those folders have sub-folders in them then their photos will go into the parent's album on the iPad
Syncing photos : http://support.apple.com/kb/HT4236

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

I assume you have Photostream on, correct?
In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection. Both of these criteria must be met before the sync occurs.

Here is how the Help tell me of Moving Photos (BUT IT DOESN"T DO THAT!!)

I do exactly what it says but it doesn't copy the file to another event. I can however copy them anywhere else. It is **** of a work to copy them to the desctop and back to the event I want to have them be in...Do any1 have any Idea why it doesnt copy??
Select Events in the Source list.
Command-click to select two or more Events.
Double-click one of the chosen Events to open them.
If you have set your preferences to use the Event double-click to magnify photos, move your mouse to the bottom of the Event’s key photo and click the “Show photos” button when it appears.
Drag the photos you want to move into the Event you want to add them to.
To select multiple photos that are not next to one another, hold the Command key down as you click.
The moved photos will appear at the end of the Event.
You can also use cut and paste to move one or more photos from one Event to another.
To do so, select one or more photos you want to move and then choose Edit > Cut (or press Command X). Then select the Event you want to move the photos to, and choose Edit > Paste (or press Command V). The photos are removed from one Event and appear in the other.

It works for me. When you double click on one of the two selected Events (in the Events mode) do you get a window with the two events displayed like rolls were in iPhoto 6? I selected a photo from one of those events and dragged it (a green circle with the number of photos being dragged was created next to the cursor) into the other event. Worked as advertised like this.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Moving photos from one iPhoto library to another

Is there a way to move photos from one iPhoto library to another? I tried to use export, and that puts the photos in the other iPhoto library (I can see the photo if I open Hard drive>user>pictures>iPhoto Library but when I open iPhoto it is not in that Library's library.
If I have not made myself clear, please ask and I'll try again.
Dave

sudkcore
Is there really no other way than via third party software??
Yes there is, detailed above: export from one, import to another.
I love using iPhoto but this is a real drawback.
Wow, really?
I have bought an external disk so i can free the space on my laptop by moving photos and now I have to buy some software in order to do that??
You don't have to buy it. What's more the free version of iPhoto Library Manager will move up to 20 pics at a time. And the paid version is only $20.
BTW: you can run an entire library from the external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

How do I reduce the number of pixels in my photos?

How do I reduce the number of pixels in my photos?

Export them at a smaller size:
File -> Export - not the options at 'Size'
Regards
TD

Photos got deleted from roll after accepting icloud photo share, How do I recover?

Photos got deleted from roll after accepting icloud photo share. How could I recover them?

Hi JapArun,
The resource below explains what happens when you enable the iCloud Photo Library feature. I've highlighted the key information here for you. Click on the article for complete details.
Get help with your iCloud Photo Library - Apple Support
https://support.apple.com/en-us/HT204570
What happened to the Camera Roll album on my iOS device?
When you turn on iCloud Photo Library, The Camera Roll album is replaced with an All Photos album. The All Photos album gives you the same compact scroll view, now with all your photos and videos organized by the date you add them.
Take Care,
- Judy

HT201317 Will photos deleted from camera roll be deleted in photo stream?

There is so many contradicting answers online! I just want to take more photos and keep the ones I have. So, if I delete my camera roll, with the photo stream "backed-up" w/ iCloud, will the photos in photo stream be untouched?

I found that in my iphone 5 recently upgrade to iOS 8.1, I found that the photo in camera roll deleted, the same photo in photo stream will delete along. How to only delete photo in either camera roll or photo stream without delete once for both camera roll or photo stream ?

Moving photos between projects

I'm having a problem - erratically - moving photos from one project to another. When I select one photo & drag it to a different project - the entire project gets moved instead of just the one selected photo. (I've double checked that there are no photos selected before I select the photo that I want to move.)
If I cancel the move, I end up with missing thumbnails & sometimes missing photos.
This is erratic because sometimes dragging one photo to another project works.

It is really hard to tell what might be happening - we need more details:
What is your Aperture version? The most recent Aperture 3.4.1?
Are your images referenced or managed? Raw or jpegs?
How did you edit them? With Aperture or an external editor?
Do you create new versions when editing and stack them, or edit the current version?
And after moving to a new project, the preview of the version shows the original master, but the thumbnail shows the original edits? Is that correct?
I Suspect, when you moved the images, they lost their previews. As a test, duplicate an image version (Photo > Duplicate Version) and force the generation of a new preview (Ctrl-click, hold down the options key ⌥, select "Generate Preview"). Does that bring back the edits? Also you could try to export the image version ans see, if the edits are still there.
Regards
Léonie

How do I delete photos from camera roll but keep same photo in album

how do I delete photos from camera roll but keep same photo in album

You can't. The albums that you created on the iPad do not actually contain copies of the photos, but merely pointers to those photos. If you remove the photos from the camera roll, they will be removed from the iPad. Albums on the iPad are simply for your own organization on the device. Those albums cannot be imported to your computer either, since the photos do not exist in the albums.

Is it possible to rename photo in the "camera roll" OR reset the photo number in iphone 4s? (Clearly explained the situation)

Hi everyone, nice to meet you all. This is my first discussion starting in here and nice to meet you all. I used Android device before and this is my first apple mobile that I owned. I am using iphone 4s. (5.0.1)
I have search a lot but no answer that how can I rename the photo in the camera roll in iphone or in Windows 7.
What I want to do is:
I have IMG_0006, IMG_0007, IMG_0015, IMG_0016, IMG_0017, total 5 files.
I want to change the name that make their sequence will become IMG_0001, IMG_0002, IMG_0003, IMG_0004, IMG_0005 and I want the following picture will take place in IMG_0006. (This is just what I want but it never happened)
but seems that I can't rename them and I have tried that if I take 2 pictures after IMG_0017, but I delete them (which is delete IMG_0018 and IMG_0019), then take another new picture again, it will name as IMG_0020 instead of IMG_0018.
Questions:
1. Are there any methods to reset the photo number by deleting file under the "PhotoData" that we can see in iPhone Explorer?
OR
2. Are there any methods to rename the photo in the "camera roll" folder?
I have tried to rename the photo directly in iPhone Explorer but it will make the photo cannot be read in iphone.
3. Is it possible that I can rename them directly and rebuild the camera roll by deleting the Photos.sqlite under the PhotoData folder to solve the unreadable problem in iphone 4?
Thanks a lot to read all of the words above

Thanks for your quick reply. I think I have tried but I cannot.
There are no any options to let you choose "rename" in Windows 7 if you connect the iphone via USB
I have tried to rename the photo directly in iPhone Explorer but it will make the photo cannot be read in iphone and just got nothing to show on its screen until I rename it into the previos name again then the picture will show properly.
May be it can but I do not know how to rename them in Windows 7, could you please show me step by step?

IPhoto, moving photo's to my document folder, and remove thumbnails from iphoto.

iPhoto, moving photo's to my document folder, and remove thumbnails from iphoto.
How to? Please...I cut and paste items, it is removed from iphoto for a few seconds then they appear again.

The photos that are appearing on the mini - are they photos taken with an iPhone or iPad? If so, open System Preferences on both computers and select the iCloud tab. On the mini, click the Photos checkmark off and on the MBP click the Photos checkmark on (if it isn't already), then start iPhoto and select Preferences. Select the Photo Stream tab and make sure Photo Stream is on.

Rolling pixelation in moving photos

Similar Messages

Maybe you are looking for