Rolling restart of rac database
what happens to the already present connections while doing a rolling restart of rac database?
if it is already established connection to a node and doing something what will happen, will it wait till that session completes what it is doing?
>>what happens to the already present connections while doing a rolling restart of rac database?
>> if it is already established connection to a node and doing something what will happen, will it wait till that session completes what it is doing?
As said if TAF is configured only SELECT queries will be failed over to other instance. If it is DDL then it success will depend on the parameter such as IMMEDIATE/TRANSNATIONAL supplied with SHUTDOWN command.
HTH,
Pradeep
Similar Messages
-
Metalink Document IDs for RAC database
Hello,
This is Khalid, Plz any body could give me metalink document id's for RAC database managing and monitoring, backup and recoveries etc.. plz any document id related to RAC databases.....
Thanks & Regards
KhalidClusterware References
Metalink Notes
259301.1 CRS and 10g RAC
This note contains a useful awk script to improve the output of crs_stat -ls
436067.1 Windows CRS_STAT script to display long names correctly
309541.1 How to start/stop the 10g CRS Clusterware
263897.1 How to stop Cluster Ready Services (CRS)
298073.1 How to remove CRS auto start and restart for a RAC instance
295871.1 How to verify if CRS install is valid
316583.1 VIPCA fails complaining that interface is not public
341214.1 How to cleanup after a failed (or successful) Oracle Clusterware installation
280589.1 How to install Oracle 10g CRS on a cluster where one or more nodes are not to be configured with CRS immediately
357808.1 CRS Diagnostics
272331.1 CRS 10g Diagnostic Guide
330358.1 CRS 10g R2 Diagnostic Collection Guide
331168.1 Oracle Clusterware consolidated logging in 10gR2
342590.1 CRS logs not being written
357808.1 Diagnosability for CRS/EVM/RACG
459694.1 Procwatcher: Script to Monitor and Examine Oracle and CRS Processes
289690.1 Data Gathering for Troubleshooting RAC and CRS issues
265769.1 Troubleshooting CRS Reboots
240001.1 Troubleshooting CRS root.sh problems (10g RAC)
239989.1 10g RAC - Stopping Reboot Loops when CRS problems occur
294430.1 CSS Timeout Computation in 10g RAC
284752.1 10gRAC: Steps to Increase CSS Misscount, Reboottime and Disktimeout
462616.1 Reconfiguring the CSS disktimeout of 10gR2 Clusterware for proper LUN failover
293819.1 Placement of voting and OCR disk file in 10g RAC
317628.1 How to replace a corrupt OCR mirror file
452486.1 Moving OCR and Voting Disk to another location
399482.1 How to recreate OCR/Voting disk accidentally deleted
358620.1 How to recreate OCR/Voting disk in 10gR1/R2 RAC
279793.1 How to Restore a Lost Voting Disk in 10g
264847.1 How to Configure Virtual IPs for 10g RAC
283684.1 How to change interconnect/public interface IP subnet in a 10g cluster
276434.1 Modifying the VIP or VIP Hostname of an Oracle 10g Clusterware Node
294336.1 Changing the check interval for the Oracle 10g VIP
219361.1 Troubleshooting Instance Evictions (ORA-29740)
297498.1 Resolving Instance Evictions on Windows platforms
315125.1 What to check if the Cluster Synchronization Services daemon (OCSSD) does not start
270512.1 Adding a node to a 10g RAC Cluster
269320.1 Removing a node from a 10g RAC Cluster
338706.1 Cluster Ready Services (CRS) rolling upgrade
399031.1 Step-by-step installation of Oracle Clusterware one-off and bundle patches for Oracle 10g
401783.1 Changes in Oracle Clusterware after applying 10.2.0.3 Patchset
405820.1 Known Issues After Applying 10.2 CRS bundle patches
316817.1 Cluster Verification Utility (CLUVFY) FAQ
372358.1 Shared disk check with the Cluster Verification Utility
338924.1 CLUVFY Fails with error - could not find a suitable set of interfaces for VIPs
Bugs
5849200 CRS LOGS ARE NOT BEING WRITTEN
5137401 OPROCD LOGFILE IS CLEARED AFTER A REBOOT
Fixed in Oracle 10.2.0.4+ and 11.1.0.6+
source: http://www.juliandyke.com/References/Clusterware.html
regards,
Rajeshkumar Govindarajan.
http://oracleinstance.blogspot.com -
Hi,
Oracle RAC database 10.2.0.3/RedHat4 with 2 nodes.
In the begining we had an error ORA-600[12803] so only sys can connect to database I find the note 1026653.6 this note said that we need to create AUDSES$ sequence but befor that we have to restart the database.
When we stop the datanbase we had another ORA-600 and it's impossible to start it!!
Here is a coppy of our alert file:
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 524288000
__shared_pool_size = 310378496
__large_pool_size = 4194304
__java_pool_size = 8388608
__streams_pool_size = 8388608
spfile = +DATA/osista/spfileosista.ora
nls_language = FRENCH
nls_territory = FRANCE
nls_length_semantics = CHAR
sga_target = 524288000
control_files = DATA/osista/controlfile/control01.ctl, DATA/osista/controlfile/control02.ctl
db_block_size = 8192
__db_cache_size = 184549376
compatible = 10.2.0.3.0
log_archive_dest_1 = LOCATION=USE_DB_RECOVERY_FILE_DEST
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +DATA
db_recovery_file_dest = +FLASH
db_recovery_file_dest_size= 68543315968
thread = 2
instance_number = 2
undo_management = AUTO
undo_tablespace = UNDOTBS2
undo_retention = 29880
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=OSISTAXDB)
local_listener = (address=(protocol=tcp)(port=1521)(host=132.147.160.243))
remote_listener = LISTENERS_OSISTA
job_queue_processes = 10
background_dump_dest = /oracle/product/admin/OSISTA/bdump
user_dump_dest = /oracle/product/admin/OSISTA/udump
core_dump_dest = /oracle/product/admin/OSISTA/cdump
audit_file_dest = /oracle/product/admin/OSISTA/adump
db_name = OSISTA
open_cursors = 300
pga_aggregate_target = 104857600
aq_tm_processes = 1
Cluster communication is configured to use the following interface(s) for this instance
172.16.0.2
Wed Jun 13 11:04:30 2012
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=8560
DIAG started with pid=3, OS id=8562
PSP0 started with pid=4, OS id=8566
LMON started with pid=5, OS id=8570
LMD0 started with pid=6, OS id=8574
LMS0 started with pid=7, OS id=8576
LMS1 started with pid=8, OS id=8580
MMAN started with pid=9, OS id=8584
DBW0 started with pid=10, OS id=8586
LGWR started with pid=11, OS id=8588
CKPT started with pid=12, OS id=8590
SMON started with pid=13, OS id=8592
RECO started with pid=14, OS id=8594
CJQ0 started with pid=15, OS id=8596
MMON started with pid=16, OS id=8598
Wed Jun 13 11:04:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=8600
Wed Jun 13 11:04:31 2012
starting up 1 shared server(s) ...
Wed Jun 13 11:04:31 2012
lmon registered with NM - instance id 2 (internal mem no 1)
Wed Jun 13 11:04:31 2012
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Jun 13 11:04:31 2012
LMS 0: 0 GCS shadows cancelled, 0 closed
Wed Jun 13 11:04:31 2012
LMS 1: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Wed Jun 13 11:04:31 2012
LMS 0: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:04:31 2012
LMS 1: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:04:31 2012
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=8877
Wed Jun 13 11:04:43 2012
alter database mount
Wed Jun 13 11:04:43 2012
This instance was first to mount
Wed Jun 13 11:04:43 2012
Starting background process ASMB
ASMB started with pid=25, OS id=10068
Starting background process RBAL
RBAL started with pid=26, OS id=10072
Wed Jun 13 11:04:47 2012
SUCCESS: diskgroup DATA was mounted
Wed Jun 13 11:04:51 2012
Setting recovery target incarnation to 1
Wed Jun 13 11:04:52 2012
Successful mount of redo thread 2, with mount id 3005749259
Wed Jun 13 11:04:52 2012
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: alter database mount
Wed Jun 13 11:05:06 2012
alter database open
Wed Jun 13 11:05:06 2012
This instance was first to open
Wed Jun 13 11:05:06 2012
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 13 11:05:07 2012
Started redo scan
Wed Jun 13 11:05:07 2012
Completed redo scan
61 redo blocks read, 4 data blocks need recovery
Wed Jun 13 11:05:07 2012
Started redo application at
Thread 1: logseq 7924, block 3, scn 506098125
Wed Jun 13 11:05:07 2012
Recovery of Online Redo Log: Thread 1 Group 2 Seq 7924 Reading mem 0
Mem# 0: +DATA/osista/onlinelog/group_2.372.742132543
Wed Jun 13 11:05:07 2012
Completed redo application
Wed Jun 13 11:05:07 2012
Completed crash recovery at
Thread 1: logseq 7924, block 64, scn 506118186
4 data blocks read, 4 data blocks written, 61 redo blocks read
Switch log for thread 1 to sequence 7925
Picked broadcast on commit scheme to generate SCNs
db_recovery_file_dest_size of 65368 MB is 0.61% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
SUCCESS: diskgroup FLASH was mounted
SUCCESS: diskgroup FLASH was dismounted
Thread 1 advanced to log sequence 7926
SUCCESS: diskgroup FLASH was mounted
SUCCESS: diskgroup FLASH was dismounted
Thread 1 advanced to log sequence 7927
Wed Jun 13 11:05:11 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=31, OS id=12747
Wed Jun 13 11:05:11 2012
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=32, OS id=12749
Wed Jun 13 11:05:12 2012
Thread 2 opened at log sequence 7176
Current log# 4 seq# 7176 mem# 0: +DATA/osista/onlinelog/group_4.289.742134597
Wed Jun 13 11:05:12 2012
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Wed Jun 13 11:05:12 2012
Successful open of redo thread 2
Wed Jun 13 11:05:12 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 13 11:05:12 2012
ARC0: Becoming the heartbeat ARCH
Wed Jun 13 11:05:12 2012
SMON: enabling cache recovery
Wed Jun 13 11:05:15 2012
Successfully onlined Undo Tablespace 20.
Wed Jun 13 11:05:15 2012
SMON: enabling tx recovery
Wed Jun 13 11:05:15 2012
Database Characterset is AL32UTF8
Wed Jun 13 11:05:16 2012
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_9174.trc:
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []
Wed Jun 13 11:05:16 2012
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_9174.trc:
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []
Error 600 happened during db open, shutting down database
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9174
ORA-1092 signalled during: alter database open...
Wed Jun 13 11:06:16 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth0 172.16.0.0 configured from OCR for use as a cluster interconnect
Interface type 1 bond0 132.147.160.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 524288000
__shared_pool_size = 314572800
__large_pool_size = 4194304
__java_pool_size = 8388608
__streams_pool_size = 8388608
spfile = +DATA/osista/spfileosista.ora
nls_language = FRENCH
nls_territory = FRANCE
nls_length_semantics = CHAR
sga_target = 524288000
control_files = DATA/osista/controlfile/control01.ctl, DATA/osista/controlfile/control02.ctl
db_block_size = 8192
__db_cache_size = 180355072
compatible = 10.2.0.3.0
log_archive_dest_1 = LOCATION=USE_DB_RECOVERY_FILE_DEST
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +DATA
db_recovery_file_dest = +FLASH
db_recovery_file_dest_size= 68543315968
thread = 2
instance_number = 2
undo_management = AUTO
undo_tablespace = UNDOTBS2
undo_retention = 29880
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=OSISTAXDB)
local_listener = (address=(protocol=tcp)(port=1521)(host=132.147.160.243))
remote_listener = LISTENERS_OSISTA
job_queue_processes = 10
background_dump_dest = /oracle/product/admin/OSISTA/bdump
user_dump_dest = /oracle/product/admin/OSISTA/udump
core_dump_dest = /oracle/product/admin/OSISTA/cdump
audit_file_dest = /oracle/product/admin/OSISTA/adump
db_name = OSISTA
open_cursors = 300
pga_aggregate_target = 104857600
aq_tm_processes = 1
Cluster communication is configured to use the following interface(s) for this instance
172.16.0.2
Wed Jun 13 11:06:16 2012
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=18682
DIAG started with pid=3, OS id=18684
PSP0 started with pid=4, OS id=18695
LMON started with pid=5, OS id=18704
LMD0 started with pid=6, OS id=18721
LMS0 started with pid=7, OS id=18735
LMS1 started with pid=8, OS id=18753
MMAN started with pid=9, OS id=18767
DBW0 started with pid=10, OS id=18788
LGWR started with pid=11, OS id=18796
CKPT started with pid=12, OS id=18799
SMON started with pid=13, OS id=18801
RECO started with pid=14, OS id=18803
CJQ0 started with pid=15, OS id=18805
MMON started with pid=16, OS id=18807
Wed Jun 13 11:06:17 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=18809
Wed Jun 13 11:06:17 2012
starting up 1 shared server(s) ...
Wed Jun 13 11:06:17 2012
lmon registered with NM - instance id 2 (internal mem no 1)
Wed Jun 13 11:06:17 2012
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Jun 13 11:06:18 2012
LMS 0: 0 GCS shadows cancelled, 0 closed
Wed Jun 13 11:06:18 2012
LMS 1: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Wed Jun 13 11:06:18 2012
LMS 0: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:06:18 2012
LMS 1: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:06:18 2012
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=18816
Wed Jun 13 11:06:18 2012
ALTER DATABASE MOUNT
Wed Jun 13 11:06:18 2012
This instance was first to mount
Wed Jun 13 11:06:18 2012
Reconfiguration started (old inc 2, new inc 4)
List of nodes:
0 1
Wed Jun 13 11:06:18 2012
Starting background process ASMB
Wed Jun 13 11:06:18 2012
Global Resource Directory frozen
Communication channels reestablished
ASMB started with pid=22, OS id=18913
Starting background process RBAL
* domain 0 valid = 0 according to instance 0
Wed Jun 13 11:06:18 2012
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Jun 13 11:06:18 2012
LMS 0: 0 GCS shadows cancelled, 0 closed
Wed Jun 13 11:06:18 2012
LMS 1: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Wed Jun 13 11:06:18 2012
LMS 0: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:06:18 2012
LMS 1: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:06:18 2012
Submitted all GCS remote-cache requests
Fix write in gcs resources
RBAL started with pid=23, OS id=18917
Reconfiguration complete
Wed Jun 13 11:06:22 2012
SUCCESS: diskgroup DATA was mounted
Wed Jun 13 11:06:26 2012
Setting recovery target incarnation to 1
Wed Jun 13 11:06:26 2012
Successful mount of redo thread 2, with mount id 3005703530
Wed Jun 13 11:06:26 2012
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Wed Jun 13 11:06:27 2012
ALTER DATABASE OPEN
This instance was first to open
Wed Jun 13 11:06:27 2012
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 13 11:06:27 2012
Started redo scan
Wed Jun 13 11:06:27 2012
Completed redo scan
61 redo blocks read, 4 data blocks need recovery
Wed Jun 13 11:06:28 2012
Started redo application at
Thread 2: logseq 7176, block 3
Wed Jun 13 11:06:28 2012
Recovery of Online Redo Log: Thread 2 Group 4 Seq 7176 Reading mem 0
Mem# 0: +DATA/osista/onlinelog/group_4.289.742134597
Wed Jun 13 11:06:28 2012
Completed redo application
Wed Jun 13 11:06:28 2012
Completed crash recovery at
Thread 2: logseq 7176, block 64, scn 506138248
4 data blocks read, 4 data blocks written, 61 redo blocks read
Picked broadcast on commit scheme to generate SCNs
Wed Jun 13 11:06:28 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=28, OS id=19692
Wed Jun 13 11:06:28 2012
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=29, OS id=19695
Wed Jun 13 11:06:28 2012
Thread 2 advanced to log sequence 7177
Thread 2 opened at log sequence 7177
Current log# 3 seq# 7177 mem# 0: +DATA/osista/onlinelog/group_3.291.742134597
Successful open of redo thread 2
Wed Jun 13 11:06:28 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 13 11:06:28 2012
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 13 11:06:28 2012
ARC1: Becoming the heartbeat ARCH
Wed Jun 13 11:06:28 2012
SMON: enabling cache recovery
Wed Jun 13 11:06:28 2012
db_recovery_file_dest_size of 65368 MB is 0.61% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
SUCCESS: diskgroup FLASH was mounted
SUCCESS: diskgroup FLASH was dismounted
Wed Jun 13 11:06:31 2012
Successfully onlined Undo Tablespace 20.
Wed Jun 13 11:06:31 2012
SMON: enabling tx recovery
Wed Jun 13 11:06:31 2012
Database Characterset is AL32UTF8
Wed Jun 13 11:06:31 2012
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_19596.trc:
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []
Wed Jun 13 11:06:32 2012
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_19596.trc:
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []
Error 600 happened during db open, shutting down database
USER: terminating instance due to error 600
Instance terminated by USER, pid = 19596
ORA-1092 signalled during: ALTER DATABASE OPEN...
Wed Jun 13 11:11:35 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth0 172.16.0.0 configured from OCR for use as a cluster interconnect
Interface type 1 bond0 132.147.160.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 524288000
__shared_pool_size = 318767104
__large_pool_size = 4194304
__java_pool_size = 8388608
__streams_pool_size = 8388608
spfile = +DATA/osista/spfileosista.ora
nls_language = FRENCH
nls_territory = FRANCE
nls_length_semantics = CHAR
sga_target = 524288000
control_files = DATA/osista/controlfile/control01.ctl, DATA/osista/controlfile/control02.ctl
db_block_size = 8192
__db_cache_size = 176160768
compatible = 10.2.0.3.0
log_archive_dest_1 = LOCATION=USE_DB_RECOVERY_FILE_DEST
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +DATA
db_recovery_file_dest = +FLASH
db_recovery_file_dest_size= 68543315968
thread = 2
instance_number = 2
undo_management = AUTO
undo_tablespace = UNDOTBS2
undo_retention = 29880
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=OSISTAXDB)
local_listener = (address=(protocol=tcp)(port=1521)(host=132.147.160.243))
remote_listener = LISTENERS_OSISTA
job_queue_processes = 10
background_dump_dest = /oracle/product/admin/OSISTA/bdump
user_dump_dest = /oracle/product/admin/OSISTA/udump
core_dump_dest = /oracle/product/admin/OSISTA/cdump
audit_file_dest = /oracle/product/admin/OSISTA/adump
db_name = OSISTA
open_cursors = 300
pga_aggregate_target = 104857600
aq_tm_processes = 1
Cluster communication is configured to use the following interface(s) for this instance
172.16.0.2
Wed Jun 13 11:11:35 2012
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=16101
DIAG started with pid=3, OS id=16103
PSP0 started with pid=4, OS id=16105
LMON started with pid=5, OS id=16107
LMD0 started with pid=6, OS id=16110
LMS0 started with pid=7, OS id=16112
LMS1 started with pid=8, OS id=16116
MMAN started with pid=9, OS id=16120
DBW0 started with pid=10, OS id=16132
LGWR started with pid=11, OS id=16148
CKPT started with pid=12, OS id=16169
SMON started with pid=13, OS id=16185
RECO started with pid=14, OS id=16203
CJQ0 started with pid=15, OS id=16219
MMON started with pid=16, OS id=16227
Wed Jun 13 11:11:36 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=16229
Wed Jun 13 11:11:36 2012
starting up 1 shared server(s) ...
Wed Jun 13 11:11:36 2012
lmon registered with NM - instance id 2 (internal mem no 1)
Wed Jun 13 11:11:36 2012
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Jun 13 11:11:36 2012
LMS 0: 0 GCS shadows cancelled, 0 closed
Wed Jun 13 11:11:36 2012
LMS 1: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Wed Jun 13 11:11:36 2012
LMS 1: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:11:36 2012
LMS 0: 0 GCS shadows traversed, 0 replayed
Wed Jun 13 11:11:36 2012
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=16235
Wed Jun 13 11:11:37 2012
ALTER DATABASE MOUNT
Wed Jun 13 11:11:37 2012
This instance was first to mount
Wed Jun 13 11:11:37 2012
Starting background process ASMB
ASMB started with pid=22, OS id=16343
Starting background process RBAL
RBAL started with pid=23, OS id=16347
Wed Jun 13 11:11:44 2012
SUCCESS: diskgroup DATA was mounted
Wed Jun 13 11:11:49 2012
Setting recovery target incarnation to 1
Wed Jun 13 11:11:49 2012
Successful mount of redo thread 2, with mount id 3005745065
Wed Jun 13 11:11:49 2012
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Wed Jun 13 11:22:25 2012
alter database open
This instance was first to open
Wed Jun 13 11:22:26 2012
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 13 11:22:26 2012
Started redo scan
Wed Jun 13 11:22:26 2012
Completed redo scan
61 redo blocks read, 4 data blocks need recovery
Wed Jun 13 11:22:26 2012
Started redo application at
Thread 1: logseq 7927, block 3
Wed Jun 13 11:22:26 2012
Recovery of Online Redo Log: Thread 1 Group 1 Seq 7927 Reading mem 0
Mem# 0: +DATA/osista/onlinelog/group_1.283.742132543
Wed Jun 13 11:22:26 2012
Completed redo application
Wed Jun 13 11:22:26 2012
Completed crash recovery at
Thread 1: logseq 7927, block 64, scn 506178382
4 data blocks read, 4 data blocks written, 61 redo blocks read
Switch log for thread 1 to sequence 7928
Picked broadcast on commit scheme to generate SCNs
Wed Jun 13 11:22:27 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=31, OS id=13010
Wed Jun 13 11:22:27 2012
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=32, OS id=13033
Wed Jun 13 11:22:27 2012
Thread 2 opened at log sequence 7178
Current log# 4 seq# 7178 mem# 0: +DATA/osista/onlinelog/group_4.289.742134597
Successful open of redo thread 2
Wed Jun 13 11:22:27 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 13 11:22:27 2012
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 13 11:22:27 2012
ARC1: Becoming the heartbeat ARCH
Wed Jun 13 11:22:27 2012
SMON: enabling cache recovery
Wed Jun 13 11:22:30 2012
db_recovery_file_dest_size of 65368 MB is 0.61% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
SUCCESS: diskgroup FLASH was mounted
SUCCESS: diskgroup FLASH was dismounted
Wed Jun 13 11:22:31 2012
Successfully onlined Undo Tablespace 20.
Wed Jun 13 11:22:31 2012
SMON: enabling tx recovery
Wed Jun 13 11:22:32 2012
Database Characterset is AL32UTF8
Wed Jun 13 11:22:32 2012
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_11751.trc:
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []
Wed Jun 13 11:22:33 2012
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_11751.trc:
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []
Error 600 happened during db open, shutting down database
USER: terminating instance due to error 600
Instance terminated by USER, pid = 11751
ORA-1092 signalled during: alter database open...
regards,Hi;
Errors in file /oracle/product/admin/OSISTA/udump/osista2_ora_9174.trc:Did you check trc file?
ORA-00600: code d'erreur interne, arguments : [kokiasg1], [], [], [], [], [], [], []You are getting oracle internal error(ORA 600) which mean you could need to work wiht oracle support team. Please see below note, if its not help than i suggest log a sr:
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
for your future rac issue please use Forum Home » High Availability » RAC, ASM & Clusterware Installation which is RAC dedicated forum site.
Regard
Helios -
Upgrade of RAC database in 10g or 11g
Hi,
Can we upgrade RAC database without downtime like we do patch?
Regardsuser602441 wrote:
Hi,
Can we upgrade RAC database without downtime like we do patch?
RegardsHi,
The Oracle Clusterware software always fully supports rolling upgrades, while the ASM software is rolling upgradeable at version 11.1.0.6 and beyond.
Rolling upgrade: we mean upgrading software (Oracle Database, Oracle Clusterware, ASM or the OS itself) while the cluster is operational by shutting down a node, upgrading the software on that node, and then reintegrating it into the cluster, and so forth one node at a time until all the nodes in the cluster are at the new software level.
For the Oracle Database software (RAC), it is possible only for certain single patches that are marked as rolling upgrade compatible. Most Bundle patches and Critical Patch Updates (CPU) are rolling upgradeable. Patchsets and DB version (10g to 11g) changes are not supported in a rolling fashion, one reason that this may be impossible is that across major releases, there may be incompatible versions of the system tablespace, for example. To upgrade these in a rolling fashion one will need to use a logical standby with Oracle Database 10g or 11g.
Regards,
Levi Pereira -
Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?
While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
or incompatibility within the X-window product itself with certain kernel levels.
Patching may overwrite some packages that you may install, however, _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
back after the patching is completed.
From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
please create an SR so that we can review packages / rpms on an individual basis.
Once again: the main criteria for not supporting rpms is regarding the kernel itself
Chuck -
Disable auto restarting of Rac instances.
hello guys,
we can use the SRVCTL disable command to disable a particular ASM instance or Rac database instance from clusterware to restart it manually if we are performing some maintenance activities. but in oracle 11gR2 RAC databases the databases can be either administrator managed or policy managed. again there are two policies automatic and manual. automatic with automatically restart the instances. here if we set the policy to manual the clusterware cannot restart the database instance.
1.now we have a RAC database with 5 instances and and we set the policy to manual. it means that after a system restart the clusterware cannot restart all the database instances automatically.. is this correct.
2. we can change the current policy to another policy using the SRVCTL modify database -d RAC -Y management_policy.. here the management policy can be only either automatic and manual right...
help guys..Hi ,
Point 1 and point 2 seems to be correct for oracle 11g rel2 Databases.
srvctl -y {AUTOMATIC | MANUAL} Management policy for the database.
1*.If AUTOMATIC
(the default), then the database is automatically
restored to its previous running condition (started or
stopped) upon restart of the database host computer.
If MANUAL, then the database is never automatically
restarted upon restart of the database host computer.
A MANUAL setting does not prevent Oracle Restart
from monitoring the database while it is running and
restarting it if a failure occurs.
srvctl modify option
*2.Enables you to modify the instance configuration without removing and adding
Oracle Clusterware resources. Using modify preserves the environment in the OCR
configuration that would otherwise need to be re-entered. The configuration
description is modified in the OCR configuration, and a new Oracle Clusterware
profile is generated and registered. The change takes effect when the application is
next restarted.
Eg:
srvctl modify asm
Modify the listener used by Oracle ASM, the disk group discovery string used by
Oracle ASM, or the SPFILE used by Oracle ASM for a single-instance database or a
cluster database.
Hope it answered your queries.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/
Edited by: Rafi (Oracle DBA) on Dec 2, 2010 9:39 PM -
Listener target is offline on rac database
hi all,
os-linux
oracle 10.0.2
i am using two node rac (rac1,rac2).
i used rconfig for converting a non rac database to rac database.
Everything is working fine but when i fire command crs_stat
i am getting
NAME=ora.rac1.LISTENER_RCONFIG_RAC1.lsnr
TYPE=application
TARGET=OFFLINE
STATE=ONLINE on nrac1
NAME=ora.rac2.LISTENER_RCONFIG_RAC2.lsnr
TYPE=application
TARGET=OFFLINE
STATE=ONLINE on nrac2
please give me the solution.
Edited by: varun4dba on Nov 15, 2010 12:28 PMWhat is the output of:
crs_stat -v ora.rac1.LISTENER_RCONFIG_RAC1.lsnrTry to stop listeners and and to restart them with crs_start:
crs_start ora.rac1.LISTENER_RCONFIG_RAC1.lsnr -
Restoring Back To 10g After A Failed 11g Upgrade Of a RAC Database
I'm testing this out on a small test RAC database. I successfully upgraded it from 10.2.0.4 to 11.2.0.2 but wanted to test the scenario of having to go back to 10g if the upgrade really hosed up. The first recovery attempt seemed to be successful but after bringing the DB down with srvctl, it failed on the next startup saying it needed to be started in upgrade mode. Something from 11g was still in place or the fact that I was trying to restart a 10g database managed by 11g clusterware was the issue. I tried starting the DB from both 10g and 11g environments and got the same result. Even starting each instance individually got the same result.
In all that I tried, I got the usual incarnation and "until time before reset time" messages. I've been doing this all through RMAN without EM or Grid Ctl. As usual, any docs I found have had just a little information and I have to piece my own instructions together from all of them, not knowing for sure it all steps would apply in my situation.
Can anybody point me to a good doc or other resource that might help me out? Many thanks!Now I have a different issue with apparently the same problem. I successfully did the restore/recover as before but the thing pukes when I open resetlogs at the end. Something, somewhere is still pointing to 11g but I have no idea where or what has changed since the last time I did this. Maybe I've messed things up by doing this multiple times. Here are my RMAN commands:
RMAN> connect target
RMAN> startup force nomount;
RMAN> RESTORE SPFILE TO '+DATA/jimg/spfilejimg.ora' from '/local/oracle/10.2.0/db_1/dbs/c-2526333028-20110915-01';
RMAN> shutdown immediate;
(in a different session, from command line)
% mv /local/oracle/10.2.0/db_1/dbs/initJIMG1.ora.bak /local/oracle/10.2.0/db_1/dbs/initJIMG1.ora
RMAN> startup force nomount pfile='/local/oracle/10.2.0/db_1/dbs/initJIMG1.ora';
RMAN> restore controlfile from '/local/oracle/10.2.0/db_1/dbs/c-2526333028-20110915-01';
RMAN> alter database mount;
RMAN>
run {
restore database;
recover database;
RMAN> alter database open resetlogs;
The errors I get after resetlogs are:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/16/2011 09:24:50
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-03114: not connected to ORACLE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/16/2011 09:24:50
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
This is being done on a small, expendable database for practice. I think I've learned enough about what NOT to do to keep me from getting in this jam to begin with. Any thoughts? -
Hi All,
can you please explain abt rolling upgrades in rac env
suppose i am having rac setup on 10.2.0.1 if i want to apply patch set 10.2.0.4 is it required downtime
As per the readme of 10.2.0.4
1)Stop every thing on node 1 and apply patch set
2)stop every thing on node 2 and apply patch set
3)stop the database and run the catupgrd.sql script.
My question is for running catupgrd script i have to bring down the db so what the meaning of rolling upgrade??
And in this type of sece which type of upgrade is best one rolling or non-rolling.
KK
Edited by: user12061936 on May 20, 2010 2:35 PMHi HTH
Thank you for clearing my doubts regarding Rolling upgrades and i have gone though the link and i have noticed the following steps
For Standalone system
1) Install Oracle 10g to a separate Oracle Home on the same server
2) Create a 10g database with only the base tablespaces: SYSTEM, SYSAUX, UNDO, and TEMP
3) On the 9i database, put all your tablespaces into read only mode (write downtime begins)
4) Perform a transportable tablespace export of all non-system tablespaces (as a sysdba user)
5) Shut down the 9i database (true downtime begins)
6) Start up the 10g database
7) Perform a transportable tablespace import into the 10g database (end true downtime)
8) Make all your tablespaces read/write (end write downtime)
The above steps is going to work only for 9i to 10g or can we use it to any version to version.
BY using TTS is it suggestable method to do the upgrade??
KK
Edited by: user12061936 on May 21, 2010 11:41 AM -
Is your RAC database working good??
Hi, all.
I have a 2 node RAC database 10.2.0.2.0 on 32bit windows 2003 EE SP1.
I am wondering if your RAC database is working good.
In my case, there are a number of gc related wait events such as gc buffer busy and gc cr request. Thus, I need to restart one node from time to time.( on average, one time per a week)
How about yours??
Thanks and Regards..In my case, there are a number of gc related wait events such as gc buffer busy and gc cr request. Thus, I need to restart one node from time to time.( on average, one time per a week)Seeing excessive/high gc related wait events usually indicates poor interconnect performance and that the interconnect may not have the required bandwidth and is the possible bottleneck. In other words, your data requests via the interconnect are much higher than what it could support without waits. The holding instance may not be able to make the requested block available immediately and thus the wait occurs.
Just curious, how did you decide that these gc waits are causing performance problems and that restarting the nodes would fix it? Are you noticing better performance after restarting the nodes?
Thanks
Chandra -
Unable to startup 12c RAC database, can't open spfile in ASM
hello,
I'm testing 12cRAC database on RHEL5 and need your help to troubleshoot and fix the following issue -
DBCA fails at the end of the configuration to create and startup new RAC database with the following errors
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/TDB1/spfileTDB1.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/TDB1/spfileTDB1.ora
ORA-15056: additional error message
ORA-17503: ksfdopn:2 Failed to open file +DATA/TDB1/spfiletdb1.ora
ORA-01017: invalid username/password; logon denied
I also tried executing script (which was created by DBCA) to create the new DB manually and got the same results - it happens during first attempt to start it up using SPFILE after new DB was successfully created (it was started up using pfile)
Clusterware with ASM install was successful, binaries were also installed without issues,
cluster seems healthy, I see correct files within ASM using asmcmd etc ..
got stuck here and need some directions ... very confused by ORA-01017 password error
wonder if anyone had same or similar issues ?
Thank you !Fixed.
Thank you everyone for suggestions and recommendations -
ASM is accessible using asmcmd and I can see all the DB files incuding spfile, they were created by DBCA, alert log showed same information I posted
After extensive troubleshooting and testing the issue was idedntified and fixed - 'dba' group needs to be the primary group for 'oracle' user, not the secondary one. I suspected that something was not right with 'oracle' user access to asm based on that strange password error. There is more I need to check as the issue and fix with swapping groups seems strange. Secondary group is not enough ti have proper rights ??? my first reaction was - seriously ? wtf ?
Anyway - I need to move one now ...
Thank you again ! -
How can I have a collective AWR report for RAC database in 10gR2 and 11gR1?
Plz correct me here
awrrpt.sql takes the snapshot at the instance level and incase we have 5 instances we have to take 5 awr reports for a particular period.correct???
If above is true ,any wayout to collect a single collective AWR report for RAC database which includes information on all the instances in Oracle 10g R2 or 11gR1 ?
Thanks in advance
GaganI have never come across a way for this. though I can n't say it is not there.
But I guess it may not be feasible too becuase as we know the current AWR report contains data which is specific for one instance.
Various hit ratios, top events, instance effeciency reports.... what not ..
It would be really nice to see something is a new format where it lists values from each instance in a single report.. I guess such a thing Does not exiist as of now. -
Question about DBCA generate script o create RAC database 2 node cluster
Question about creating two node RAC database 11g after installing and configuration 11g clusterware. I've used DBCA to generate script to create a rac database. I've set
environment variable ORACLE_SID=RAC and the creating script creates instance of RAC1 and RAC2. My understanding is that each node will represent a node, however there should only be one database with a name of 'RAC'. Please adviseYou are getting your terminology mixed up.
You only have one database. Take a look, there are one set of datafiles on shared storage.
You have 2 instances which are accessing one database.
Database name is RAC. Instance names are RAC1, RAC2, etc, etc.
Also, if you look at the listener configuration and if your tnsnames is setup properly then connecting to RAC will connect you to either one of the instances wheras connecting to RAC1 will connect you to that instance. -
ORA-20600 error while trying to add RAC database
I'm receiving the following error while trying to add the RAC database in grid control. Any idea?.
ORA-20600: The specified target is in the process of being deleted
This database doesn't exists in targets. But, I'm still unable to add.Check the metalink Note: Unable To Add Rac Database To Grid Control Getting Error Ora-20600 [ID 1218797.1]
You need to wait for a while and check the status. -
Anybody using 11g RAC Database with OIM 9.1.0.2?
Hi,
We have poor performance problems with 11g RAC Database with OIM 9.1.0.2.
It looks like the issue could be because of RAC Ccluster.
Anybody using 11g RAC Database with OIM 9.1.0.2?
If so, What is the JDBC Driver r u using? Also what App Server (Weblogic or OAS etc) ?
Appreciate your input.
Regards
Vijay ChinnasamyWe are using weblogic 10.3. And I am sorry to tell you that we are yet to move to production.
We are planning to have Database in RAC, so i just thought of taking inputs from you.
can you tell me under what operations you face the poor performance issue?
For us the max no. of users in production is around 6k. So I am wondering how this RAC availability will affect the performance.
Thanks for sharing your inputs.
Maybe you are looking for
-
What's wrong about those layouts??
Well, I've been working like crazy to be able to do something with layouts... Let me explain how our program is made... Main window: - JContentPane - JSplitPane with two parts in each, i have 5 JPanels with information in it I'm working with Eclipse
-
Icons Strangely Bouncing in Dock?
Recently I've had a lot of hickups thorughout the graphic of my system. I am running 10.8.3 on a three week old non-retina macbook pro. Today I launched safari and it bounced above the dock like normal, but continued falling below the dock and screen
-
How to display date and time on jsf page
Hi, how to display date and time on jsf page we are using 11.2.0.0 jdeveloper on windows. thanks Edited by: user12187801 on 26-Jul-2012 01:42
-
Updater Not Working (Mac Lion/CS6)
Hello, My updater says I have updates, but my updater says this when I open it: "Update Failed Updates could not be applied You are running the Adobe Application Manager. Please close all instances of Adobe Application Manager before applying updates
-
I have problems updating my softwarebecause my computer freezes when it restarts to install. I have enough disk space and I checked for disk repairs and everthing is ok. Still can't update and not my cumputer is taking longer to turn on. There is an