Rolling upgrade from 11.2.0.2 to 11.2.0.3

Windows 2008. 2 node RAC
I attempted a rolling upgrade from 11.2.0.2 to 11.2.0.3 in a dev environment in prep to do my prod. I hit all kinds of issues and when googling I found there was a known issue with rolling upgrades between these versions and there was a patch I was meant to have applied before starting the rolling upgrade. I rolled back to 11.2.0.2 but for the life of me, I cant find reference to that patch now.
anyone know what it is?
/still looking/

Hello,
Please refer below document
Things to Consider Before Upgrading to 11.2.0.3 Grid Infrastructure/ASM (Doc ID 1363369.1)
You can check the section related to 11.2.0.2.
It is better to check complete document carefully before attempting the upgrade.
Regards,
Vijay

Similar Messages

Rolling upgrade from 11.1.0.6 to 11.1.0.7

Hello -
I am testing the "rolling upgrade" from 11.1.0.6. to 11.1.0.7. I have a two node cluster on Linux. Is there a way to upgrade either the ASM software or the dbms software without causing downtime to the entire cluster? I can upgrade the clusterware in a true rolling fashion. However, when I attempt to upgrade the ASM location, it ends up taking down the other node. Same for the rdbms software - The other instance ends up going down when I start the patching on one instance - from the remove operations being performed. Has anyone successfully patched an entire stack (without downtime)?
Thanks in advance for any insights!

Yes, I am following those instructions. The ASM instructions caused the other node to be inaccessible. But, when I did the rdbms upgrade, then node B was also inaccessible during that time. I will go through more iterations of this testing, but so far, I have not been able to develop a proof of concept for a true rolling upgrade from 11.1.0.6 to 11.1.0.7. If anyone has been able to do this, please let me know the procedures that were followed.
Thanks,
Mike

Java.io.StreamCorruptedException after rolling upgrade

Hi,
After removing a first class citizen Class file A in Version2 and performing a rolling upgrade from Version1 to Version2 of our software we find an entry for Class A in replicated cache of Version2. Once we try to read / remove / or overwrite it with null we get a "java.io.StreamCorruptedException".
Is there a way to get rid of these kind of entries in the cache after rolling upgrade is performed or even prevent Class A to be added into the cache during de-serialization?
Thanks

I'm not quite sure what you mean yet. Are you talking about the server code or the client code? And, can you be a little more specific on where the problem is? I'm sorry, it's just that I've spent quite a while on the code and I haven't found the problem yet. Thanks again.

Upgrade from iPhone 4 to 4S and all photos in Camera Roll went missing

I upgraded from iPhone 4 to iPhone4S. I did a restored from my last backup before the upgrade and all my photos in my camera roll has disappeared!
What I discover is that it is still stored in the iPhone 4S as it took up 25GB of storage. However, it is not accessible inside the iPhone 4S. The photos are stuck in the iPhone 4S and taken up a lot of storage in the iPhone. Please help!

What I meant was I bought a new iPhone 4S and restored my backup of my old iPhone 4 into iPhone 4S and the camera roll photos that were in the old iPhone 4 did not show up in my iPhone 4S despite occupying space in the iPhone 4S ...

Rolling back from OIM version 11g to 9.1.0.2

Experts,
OIM version upgrade from 9.1.0.2 to 11g(11.1.1.5) need to be rolled back due to some error.
Just wanted to know views of experts.
Following steps have been completed so far of the upgrade guide [http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm].
•Task 1: Identify and Prepare Oracle Database for Oracle Identity Manager 11g (Optional)
•Task 2: Use the Repository Creation Utility to Create the Schema in the Database
•Task 3: Install Oracle Fusion Middleware
•Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema
•Task 5: Create a WebLogic Domain for Oracle Identity Manager
•Task 6: Start the WebLogic Administration Server
•Task 7: Configure Oracle Identity Manager Server 11g
•Task 8: Configure Node Manager to Start Managed Servers
•Task 9: Start the SOA Managed Server
•Task 10: Start the Oracle Identity Manager Managed Server
•Task 11: Stop the Oracle Identity Manager Managed Server
Rollback strategy:-
1. Delete extra schemas(SOA MDC etc) created during Task2
2. Restoring the OIM DB schema (of version 9.1.0.2) from backup.
3. Updating back path and variables environment with old values
4. Starting the weblogic and OIM application from old Middleware_home and OIM_HOME.
Experts,
Above rollback strategy would be enough or should i take some other point in consideration.
If you can think of any other thing please share..
Thanks,
Manohar

Yes your strategies seems fine. for dropping schema you can RCU as well.
for restore, Drop all the entities manually from oim db schema So you don't have any grant issue while importing old 10g dump
--nayan

MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?

Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Issue with SAP GUI 7.30 launching with users upgrading from 7.10

We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
I don't know why the program is trying to search for saplogontree.xml.
I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
Windows Vista and higher, and will only cause further trouble later on in the updates
See note http://service.sap.com/sap/support/notes/1409494
Jude

Upgrading from iPhone 3g to iPhone 4 - how to with no dataloss?

I am upgrading from an iPhone 3g to a iPhone 4. I don't want to lose any data (messages/contacts/apps) between the switch. I am currently using a desktop that I am synchronized with. However, once I get the iPhone 4, I want to synchronize my phone with my laptop. Am I able to synchronize my 3g with my laptop and save all data. Then move to my iPhone 4 and synchronize with no data loss?
Message was edited by: hyperhtml

All iTunes content on your iPhone should be in your iTunes library on your computer - all music, movies, tv shows, and 3rd party apps.
If you have Sync Music selected under the Music tab for your iPhone sync preferences with iTunes - you don't have manually manage music and videos selected with their being no benefit with manually managing music and videos with an iPhone, after purchasing music from the iTunes store with your iPhone, the music will be copied to your iTunes library on your computer automatically the first time you sync your iPhone with iTunes after doing so.
The same with 3rd party apps when having Sync Apps selected under the Apps tab for your iPhone sync preferences, which should be selected for a number of reasons. With this selected, after downloading an app direct with your iPhone, the app will be copied to your iTunes library automatically the first time you sync your iPhone with iTunes after doing so.
Photos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera. The Camera Roll is for temporary storage no different with any other digital camera.
And photos transferred from your computer via the iTunes sync/transfer process should remain on your computer.
If you don't have Sync Music selected and Sync Apps selected, with your 3G connected to iTunes, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. This should transfer all music purchased/downloaded from the iTunes store direct with your iPhone and the same for all 3rd party apps.
http://support.apple.com/kb/HT2109

11g Upgrade from 10.2.0.4 in SUSE 10.

Hi Gurus,
We have 11g Database upgrade on our EBS 11i environment, database size is around 1.3 TB, i already did test upgrade it was not satisfactory results what client is expecting regarding downtime, i followed manual upgrade as i am very much familier with that, i your views and suggestions to reduce upgrade downtime.
11g Upgrade from 10.2.0.4 in SUSE 10.

Hi,
Is your database is RAC or NON-RAC.
If you are going for patchset upgrade then you can go for roll upgrade patch.
as you know, you cannot escape the downtime always. ;-)
i already did test upgrade it was not satisfactory results what client is expecting regarding downtime, i followed manual upgrade as i am very much familier with thatOracle introduces DBUA with many features, still why you are not going for DBUA?
You have to test the TEST environment using DBUA ;-)
If for example For 1.3 TB you are going to consistent backup, still you have down time. then there is no point to think on UPGRADE duration.
but you can perform pro-actively like.. install the 11g ORACLE_HOME before the downtime. & so on.

Rolling upgrade in MAA database with 2 node RAC on each site

All,
I have 2 node rac on SITE A, and it has Physical Standby database on SITE B it also 2 node RAC. Currently it is on 10.2.0.4 on AIX systems. We have mission crictical application runing and we can't aford the downtime of 5 to 6 hr to upgrade our CRS,ASM,DB oracle homes to 11G or even 10.2.0.5. I read rolling upgrade document on metalink and also documnet as well, and come up with following sequence.
SITE A==Primary Site, SITE B == Standby database
1) Shutdown DB on SITE B
2) Take the OS Level Backup of Binaries only on SITE B (Both node), I think this is just a Precautionary Measure
3) Start the DB on SITE B Still Physical Standby database let it synch with primary Site SITE A
4) Convert SITE B to Logical standby database
5) let it run for some time and be the two site SYNCH
6) now stop archivelog shipping to STANDBY SITE SITE B
7) Shutdown SITE B and apply the patch/upgrade binaries (CRS/ASM/DB)
8) Start and upgrade the DB on SITE B
9) Start the logical standby apply (SQL APPLY) and let it catch up with SITE A
10) Now Switchover to logical standby database on SITE B and ask application to connect to SITE B
11) Make sure the archivelogs are moving from SITE B to SITE A and SQL Apply is runing.
12) Now Stop archive log flow from SITE B to SITE A
13) Stop the database/ASM/CRS on SITE A
14) upgrade the SITE A binaries (CRS/ASM/DB)
15) Start and upgrade the DB on SITE A
16) Start the logical standby apply (SQL APPLY) and let it catch up with SITE B
17) Now Switchover Back to SITE A and let the application connect to SITE A
At this point by SITE B is a Logical Standby database
I think these summaries the steps involved in rolling upgrade, but I can't understand how I can go back to my MAA with physical standby database mode?
Does anyone has done this? Can anyone give me some tips or comments on my steps??
Help me if you can... thanks in advance.

Hi,
Is it you want to know the OS/Kernel side setting? You must comply with the following kernel requirements to install the clusterware.
http://docs.oracle.com/cd/B28359_01/install.111/b28259/pre_hpux.htm#BABJHCJI
Thanks.

Database rolling upgrade cpu patch with minimal service outage

Oracle 11gR2 Primary Instance
Oracle 11gR2 Active Physical Standby
Requirement of applying CPU and CVE patches with minimal downtime. I believe that I've been able to apply CPU patch to Active Standby after deferring redo transport and applying patch to active physical standby first and then performing a manual switchover to have the standby become the primary and former-primary become the standby and they apply CPU Patch there and then perform another role transition to its original role.
Appreciate your experience with primary and active physical standby rolling upgrades/patches. Thanks

Hello;
I believe you are over thinking this. All you have to do on the Standby is install the patch. No switchover, no SQL. No nothing.
The SQL will move from the Primary to the Standby.
Check the readme for the patch closely or post the patch number if you want to confirm.
OR
How do you apply a Patchset,PSU or CPU in a Data Guard Physical Standby configuration [ID 278641.1]
( If it helps I had the same thoughts after my first Data Guard setup !! )
If you are trying to avoid downtime entirely the switchover will take about as long as the patch.
If you have RAC this is interesting :
http://javeedkaleem.blogspot.com/2010/05/how-to-apply-oracle-database-patch.html
As is this :
http://docs.oracle.com/cd/B28359_01/server.111/b28282/schedule_outage.htm
Best Regards
mseberg

Upgrading from BW 3.1 to BI 7

Hi Experts,
Has anyone of you have experience in working on upgrading project from BW 3.1 to BI 7 ? Please do share it with me.
I have to start working on such project in a month or so...
So I need to know exactly what would be steps I need to go through from the scratch.
Please help me and I will certainly assign points.
Regards,
Akash.

hi Akash,
use the links,
BI Upgrade from 3.x to BI 7.0
http://csc-studentweb.lrc.edu/swp/Berg/articles/Portals%202004%20-%20Upgrade%20strategy%20v8.ppt
/people/prakash.darji/blog/2006/09/22/rolling-out-the-new-sap-netweaver-2004s-bi-frontend-tools
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
Upgrade to SAP BW 7.0 from 3.1: Impact on Business Content
with hopes
Raja Singh

Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

Hi
We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
Thanks
anu

Hi Anu,
1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
Thanks,
Sneha

Upgrading from BW 3.5 to BI7.0

Hi all,
What is the work involved in a upgrade process?Lets suppose we are upgrading from BW 3.5 to BI 7.0.
Thanks in Advance,
Aravind

Hi
go through this
Up grade 3.5 to BI 7.0
Upgrading BW 3.X to SAP NetWeaver 2004s BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
/people/prakash.darji/blog
Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
/people/prakash.darji/blog
hope this helps.
M Kalpana
Message was edited by:
Kalpana M

Oracle physru rolling upgrade problem

Hi, I'm having a problem with the Oracle Physru script provided from MOS note # 949322 I was hoping I could get some help with.
My system contains of two Oracle 11.1.0.7.0, one primary and one physical standby.
The hosts are two Oracle Solaris 10 Sparc x64 machines.
My goal is to update from 11.1.0.7.0 to 11.1.0.7.8 using the script that is provided, however I'm bumping into problems at the step where the script is checking the Apply lag on the logical standby (function "get_apply_lag"). The lag seems to increase, and to be that indicates a problem with the redo apply process. However, when I query the DBA_LOGSTDBY_EVENTS View i get the following:
SQL> SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS ORDER BY EVENT_TIMESTAMP, COMMIT_SCN;
EVENT_TIME STATUS EVENT
20-SEP-11 16:02:12 ORA-16111: log mining and apply setting up
20-SEP-11 16:02:12 Apply LWM 848622, HWM 848622, SCN 848622
Showing the output from Primary archive dest 2:
SQL> show parameter log_archive_dest_2;
NAME TYPE VALUE
log_archive_dest_2 string service="test08db2", LGWR ASYNC NOAFFIRM delay=0 OPTIONAL compression=DISABLE max_failure=0 max_connections=1 reopen=300 db_unique_name="db_test08db2" net_timeout=30 valid_for=(online_logfile,primary_role)
SQL> select from v$LOGSTDBY_STATS;*
NAME VALUE
logminer session id 1
number of preparers 1
number of appliers 11
server processes in use 15
maximum SGA for LCR cache (MB) 50
maximum events recorded 2000000000
preserve commit order TRUE
transaction consistency FULL
record skipped errors Y
record skipped DDLs Y
record applied DDLs N
NAME VALUE
record unsupported operations Y
realtime apply Y
apply delay (minutes) 0
coordinator state IDLE
coordinator startup time 20-SEP-11 16:02:11
coordinator uptime (seconds) 727
txns received from logminer 62
txns assigned to apply 29
txns applied 29
txns discarded during restart 33
large txns waiting to be assigned 0
NAME VALUE
rolled back txns mined 4
DDL txns mined 2
CTAS txns mined 0
bytes of redo mined 8195884
bytes paged out 0
pageout time (seconds) 0
bytes checkpointed 709802
checkpoint time (seconds) 0
system idle time (seconds) 479
standby redo logs mined 0
archived logs mined 4
NAME VALUE
gap fetched logs mined 2
standby redo log reuse detected 0
logfile open failures 0
current logfile wait (seconds) 0
total logfile wait (seconds) 0
thread enable mined 0
thread disable mined 0
distinct txns in queue 0
41 rows selected.
SQL> select type, high_scn, status, pid from v$logstdby order by type;
TYPE HIGH_SCN STATUS PID
ANALYZER 850320 ORA-16116: no work available 20702
APPLIER 848808 ORA-16116: no work available 20719
APPLIER 850320 ORA-16116: no work available 20731
APPLIER 850204 ORA-16116: no work available 20727
APPLIER 848895 ORA-16116: no work available 20725
APPLIER 848665 ORA-16116: no work available 20705
APPLIER 848677 ORA-16116: no work available 20709
APPLIER 848728 ORA-16116: no work available 20713
APPLIER 848740 ORA-16116: no work available 20715
APPLIER 848796 ORA-16116: no work available 20717
APPLIER 848842 ORA-16116: no work available 20721
TYPE HIGH_SCN STATUS PID
APPLIER 848854 ORA-16116: no work available 20723
BUILDER 850320 ORA-16116: no work available 20221
COORDINATOR 850326 ORA-16116: no work available 20119
PREPARER 850318 ORA-16116: no work available 20223
READER 850326 ORA-16116: no work available 20217
16 rows selected.
Physru Script Output:_
### Initialize script to either start over or resume execution
Sep 20 14:35:41 2011 [0-1] Identifying rdbms software version
Sep 20 14:35:41 2011 [0-1] database nobilldb is at version 11.1.0.7.0
Sep 20 14:35:42 2011 [0-1] database nobilldb is at version 11.1.0.7.0
Sep 20 14:35:44 2011 [0-1] verifying flashback database is enabled at db_test08db1 and db_test08db2
Sep 20 14:35:44 2011 [0-1] verifying available flashback restore points
Sep 20 14:35:45 2011 [0-1] verifying DG Broker is disabled
Sep 20 14:35:46 2011 [0-1] looking up prior execution history
Sep 20 14:35:46 2011 [0-1] purging script execution state from database db_test08db1
Sep 20 14:35:46 2011 [0-1] purging script execution state from database db_test08db2
Sep 20 14:35:47 2011 [0-1] starting new execution of script
### Stage 1: Backup user environment in case rolling upgrade is aborted
Sep 20 14:35:47 2011 [1-1] stopping media recovery on db_test08db2
Sep 20 14:35:48 2011 [1-1] creating restore point PRUP_0000_0001 on database db_test08db2
Sep 20 14:35:49 2011 [1-1] backing up current control file on db_test08db2
Sep 20 14:35:50 2011 [1-1] created backup control file /opt/oracle/product/11.1.0.7/dbs/PRUP_0001_db_test08db2_f.f
Sep 20 14:35:50 2011 [1-1] creating restore point PRUP_0000_0001 on database db_test08db1
Sep 20 14:35:51 2011 [1-1] backing up current control file on db_test08db1
Sep 20 14:35:52 2011 [1-1] created backup control file /opt/oracle/product/11.1.0.7/dbs/PRUP_0001_db_test08db1_f.f
NOTE: Restore point PRUP_0000_0001 and backup control file PRUP_0001_db_test08db2_f.f
can be used to restore db_test08db2 back to its original state as a
physical standby, in case the rolling upgrade operation needs to be aborted
prior to the first switchover done in Stage 4.
### Stage 2: Create transient logical standby from existing physical standby
Sep 20 14:35:53 2011 [2-1] verifying RAC is disabled at db_test08db2
Sep 20 14:35:53 2011 [2-1] verifying database roles
Sep 20 14:35:54 2011 [2-1] verifying physical standby is mounted
Sep 20 14:35:54 2011 [2-1] verifying database protection mode
Sep 20 14:35:55 2011 [2-1] verifying transient logical standby datatype support
Sep 20 14:36:00 2011 [2-2] starting media recovery on db_test08db2
Sep 20 14:36:11 2011 [2-2] confirming media recovery is running
Sep 20 14:36:12 2011 [2-2] waiting for v$dataguard_stats view to initialize
Sep 20 14:36:13 2011 [2-2] waiting for apply lag on db_test08db2 to fall below 30 seconds
Sep 20 14:36:13 2011 [2-2] apply lag is now less than 30 seconds
Sep 20 14:36:14 2011 [2-2] stopping media recovery on db_test08db2
Sep 20 14:36:15 2011 [2-2] executing dbms_logstdby.build on database db_test08db1
Sep 20 14:36:27 2011 [2-2] converting physical standby into transient logical standby
Sep 20 14:36:52 2011 [2-3] opening database db_test08db2
Sep 20 14:37:28 2011 [2-4] configuring transient logical standby parameters for rolling upgrade
Sep 20 14:37:29 2011 [2-4] starting logical standby on database db_test08db2
Sep 20 14:37:37 2011 [2-4] waiting until logminer dictionary has fully loaded
Sep 20 14:37:58 2011 [2-4] dictionary load 17% complete
Sep 20 14:38:09 2011 [2-4] dictionary load 32% complete
Sep 20 14:38:19 2011 [2-4] dictionary load 43% complete
Sep 20 14:38:30 2011 [2-4] dictionary load 59% complete
Sep 20 14:38:40 2011 [2-4] dictionary load 62% complete
Sep 20 14:38:50 2011 [2-4] dictionary load 70% complete
Sep 20 14:39:01 2011 [2-4] dictionary load 72% complete
Sep 20 14:39:11 2011 [2-4] dictionary load 75% complete
Sep 20 14:40:54 2011 [2-4] dictionary load is complete
Sep 20 14:41:00 2011 [2-4] waiting for v$dataguard_stats view to initialize
Sep 20 14:41:01 2011 [2-4] waiting for apply lag on db_test08db2 to fall below 30 seconds
Sep 20 14:42:02 2011 [2-4] current apply lag: 316
Sep 20 14:42:32 2011 [2-4] current apply lag: 316
Sep 20 14:43:03 2011 [2-4] current apply lag: 376
Sep 20 14:43:33 2011 [2-4] current apply lag: 376
Sep 20 14:44:03 2011 [2-4] current apply lag: 437
Sep 20 14:44:34 2011 [2-4] current apply lag: 437
Sep 20 14:45:04 2011 [2-4] current apply lag: 497
Sep 20 14:45:35 2011 [2-4] current apply lag: 497
Sep 20 14:46:05 2011 [2-4] current apply lag: 558
Sep 20 14:46:36 2011 [2-4] current apply lag: 558
Sep 20 14:47:06 2011 [2-4] current apply lag: 618
I would appreciate any help I could get, I'm stuck =/
Regards,

http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-upgrades-made-easy-131972.pdf

Rolling upgrade from 11.2.0.2 to 11.2.0.3

Similar Messages

Maybe you are looking for