Rollout cross check list

Hi
We have implemented 7 module (FI, CO, PP, MM, SD, PM, QC) at two location. Now we have to roll-out the same at one more plant. I want to know if any standard check list is available to confirm whether roll-out has been done properly.
Regards,
Suresh

Hi
Check this
Rollout project
Thank You,

Similar Messages

Check list for testing

Hello everyone,
I am trying to put a document together to have a check list for integration testing. does anybody have anything like this that can share? Or any tips of what steps should be taken in consideration to complete integration testing?
Thank you for your help!

Hi,
1) Integration testing validate end to end business scenarios including interfaces. Use converted data (if applicable and based on the data strategy). Can be executed in multiple cycles based on the implementation strategy
2) Scenario-based testing across process areas
May include multiple t-codes, or equivalent units in a string or sequence
3) Testing across modules
4) Primarily deals with cross-application chains that directly or potentially impact each other
5) Consists mostly of positive testing with selected negative testing
6) Executed in the Quality Assurance test environment
7) Integration Testing will be performed in multiple cycles
8) Next cycle should not begin if critical discrepancies have not been dispositioned. All Integration test discrepancies must be closed by the end of the last integration test cycle
9) A discrepancy can be dispositioned if:
Retest Passes or
Workaround approved or
Alternate resolution approved
Regards
R. Senthil Mareeswaran.

How to cross check transports

Hi all,
we had moved all base objects to quality evry thing was fine, but we missed one already created object. So my question is for precaution sake i just want to check(cross check) all base objects which in dev,qlty,prod. Any short cut method to cross check such a big list.
Please give me some inputs to go ahead
Regards
ashwin
Edited by: ashwin kumar on Mar 4, 2008 10:10 AM

Sorry to all..its info objects... i had seen one option in MS-Office 2007 there is an option in formula as lookup..am not sure of that procedure, i tried but am not getting the result.. or is there any tool for lookup.
regards
ashwin

Cross Check Library With iPod?

Hey Everyone,
I was wondering if anyone knew of a way to cross check your iPod library with your iTunes library. The reason I am asking this question is because I go to my friend's house and get music off of their computers, and now when I look at my iPod, it has 3976 songs. However, my iTunes library only has 3967 songs. I wanted to be able to do a quick check of what songs are not in my iTunes library.
Thanks for all your help.
PS - No, syncing would not fix my problem for having the same on my ipod as that would erase all my songs on my ipod. Thanks.
Message was edited by: Confuzzeled

I figured it out. If you've been on manual management on the previous version, when you download 7.2 you have to reactivate your manual management on the options list or your Ipod does not connect with iTunes. As simple as that.

How to make my friends Profile picture in the bbm return back as normal. ( i dont check list the pp will be connect to the bbm contact)

Dear there...
do help me.. i have several problem:
1. i cant even log in to my bb application world, and i try sync from laptop, it still the same, download not success. what happen? so how to do so i cant direct log in through phone, they ask me to log in, but never give me the log in tab.it just keep appearing session expire please log in again.
2. i dont even check list my bbm pp will be the same with the bbm contact, why it still keep following the pp same with contact, therefore i cant even see what photo my friend them post. what to do for this?
3. my recent updates, it direct updates will a every single things my friend post, i just wanted it wil be the 1 post for each like usuall. now it one friends, then a lot of their post..
sorry, if my question is complicated, but i really frustate now. hope u can understand my question, thanks

Hey tiantian,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the issue: www.blackberry.com/btsc/KB28212
After this is done you should be able to login to BlackBerry App World™.
This should also resolve your BBM™ issue as well.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

SPF IPv4 IPv6 Cross-Checking Bug - Producing PermError, Rejecting Mails

Messaging Server SPF Query with IPv6 and IPv4 cross checking not skipped, but rather producing a PermError. This would reject a lot of incoming mails which have both ipv4 and ipv6 spf records published.
I suspect that it is a bug.
Linux:
bin/imsimta version
Oracle Communications Messaging Server 7u4-27.01(7.0.4.27.0) 64bit (built Aug 30 2012)
libimta.so 7u4-27.01 64bit (built 08:50:46, Aug 30 2012)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Linux mx1.mathewsystems.com 2.6.18-028stab101.1 #1 SMP Sun Jun 24 19:50:48 MSD 2012 x86_64 x86_64 x86_64 GNU/Linux
Solaris x86:
bin/imsimta version
Oracle Communications Messaging Server 7u4-27.01(7.0.4.27.0) 64bit (built Aug 30 2012)
libimta.so 7u4-27.01 64bit (built 08:47:11, Aug 30 2012)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
SunOS COMM1 5.10 Generic_147441-01 i86pc i386 i86pc
./spfquery -i 2a00:1450:400c:c05::22e -v gmail.com
Running SPF query with:
IP address: 2a00:1450:400c:c05::22e
Domain: gmail.com
Sender: [email protected] (local-part: postmaster)
HELO Domain: gmail.com
01:09:35.41: ----------------------------------------------------------------
01:09:35.41: SPFcheck_host called:
01:09:35.41: source ip = 2a00:1450:400c:c05::22e
01:09:35.41: domain = gmail.com
01:09:35.41: sender = [email protected]
01:09:35.41: local_part = postmaster
01:09:35.41: helo_domain = gmail.com
01:09:35.41:
01:09:35.41: Looking up "v=spf1" records for gmail.com
01:09:35.42: DNS query status: Pass
01:09:35.42: "v=spf1 redirect=_spf.google.com"
01:09:35.42:
01:09:35.42: Parsing modifier: "redirect = _spf.google.com"
01:09:35.42: Processing macros in _spf.google.com
01:09:35.42: Returned: _spf.google.com
01:09:35.42:
01:09:35.42: No match found, following redirect to _spf.google.com
01:09:35.42: Recursing into SPFcheck_host
01:09:35.42: ----------------------------------------------------------------
01:09:35.42: SPFcheck_host called:
01:09:35.42: source ip = 2a00:1450:400c:c05::22e
01:09:35.42: domain = _spf.google.com
01:09:35.42: sender = [email protected]
01:09:35.42: local_part = postmaster
01:09:35.42: helo_domain = gmail.com
01:09:35.42:
01:09:35.42: Looking up "v=spf1" records for _spf.google.com
01:09:35.43: DNS query status: Pass
01:09:35.43: "v=spf1 include:_netblocks.google.com include:_netblocks2.google.com include:_netblocks3.google.com ?all"
01:09:35.43:
01:09:35.43: Parsing mechanism: " include : _netblocks.google.com"
01:09:35.43: Assuming a Pass prefix
01:09:35.43: Processing macros in _netblocks.google.com
01:09:35.43: Returned: _netblocks.google.com
01:09:35.43: Recursing into SPFcheck_host
01:09:35.43: ----------------------------------------------------------------
01:09:35.43: SPFcheck_host called:
01:09:35.43: source ip = 2a00:1450:400c:c05::22e
01:09:35.43: domain = _netblocks.google.com
01:09:35.43: sender = [email protected]
01:09:35.43: local_part = postmaster
01:09:35.43: helo_domain = gmail.com
01:09:35.44:
01:09:35.44: Looking up "v=spf1" records for _netblocks.google.com
01:09:35.44: DNS query status: Pass
01:09:35.44: "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ip4:173.194.0.0/16 ?all"
01:09:35.44:
*01:09:35.44: Parsing mechanism: " ip4 : 216.239.32.0/19"*
*01:09:35.44: Assuming a Pass prefix*
*01:09:35.44: +"ip4" not supported for IPv6; returning PermError+*
+01:09:35.44: Mechanism failed with PermError+
01:09:35.44:
01:09:35.44: SPFcheck_host is returning PermError
01:09:35.45: Returned from recursion with status: PermError
01:09:35.45: Returning with status: PermError
01:09:35.45: Mechanism failed with PermError
01:09:35.45:
01:09:35.45: SPFcheck_host is returning PermError
01:09:35.45: Returned from recursion with status: PermError
01:09:35.45:
01:09:35.45: SPFcheck_host is returning PermError
01:09:35.45: ----------------------------------------------------------------
Mathew
Edited by: 994254 on 15.03.2013 17:18

Issue in Customize Clearance check list under the People Management form

Dear
We are on 11.5.10, we have created NEW template as "EXIT CHECK LIST" of People management, in which we have configured our own list which are mentioned below as example.
Check List
Name Date Status
IT Department user_input manually Verified/Pending
Finance user_input manually Verified/Pending
Human Resource user_input manually Verified/Pending
Now issue is, when head of above department change their corresponding record and successfully being update but system update last_updated_by column in all above three records who perform update/change record very last although he updated only IT record.
Therefore, we are not able to get their concern department Name in last updated by due to this issue.
Pls advice.

we handled similar situation through personalization as follows:
1a. Write the validation condition in personalization on WHEN-NEW-RECORD-INSTANCE of ORDER Block.
Through actions, display error message and disable Book button.
1b. Write the negative of validation condition in personalization on WHEN-NEW-RECORD-INSTANCE of ORDER Block.
Through actions, enable Book button.
2. Disable Book order button in LINES Block
3. Train the users to enter the order header first, order line next and then come back to header and click book (if allowed).
Thanks,
Hrishi

Check List Notification

Hello,
We realize that in the notification came out from the check list there is only minumim of data.
We are missing basic information such the employee's job, manager, department, grade etc...
Is there a way add this information to the check list notificattion?
How did you solve it in your projects?
Thank You,
Michal

Hello,
When a notification is created, the task performer need additional information about the employee in order to fully understand the task.
For instance - if the task is to allocate a laptop, need to know the employee's grade to know what kind of laptop this employee is entitle to.
If need to allocate a desk, need to know the employee's location
etc...
Hope this is clear.
Thanks, Michal

Cross checking values from two different arrays

Hi there,
I need some help with figuring out how to do this and hopefully someone here can help:
I've got movieclips of dice called "dicePicked1", "dicePicked2", etc all the way to 6. each of these movieclips has a graphics on keyframes with labels "One" to "Six".
Now I'm trying to find (in vain) a way to cross check the labels with arrays of numbers so that each time it finds a dicePicked with the appropriate label, it moves onto the next number to find. For example, I need to see if one of each dice has [1,2,3,4,5,6]. Once the program finds a dicePicked with the Label "One", it moves onto the next element which is 2 and so on.
If it finds the last element (and thus all the elements), it returns true. If it doesn't find an element (for example none of the dicePicked have a Label "Three") then it returns false. I'm trying to find a system that can accommodate different combinations and some with the same numbers multiple times (for example 3 different dicePicked have the label "three")
I'm having alot of trouble figuring out a good system for this and any help would be awesome!
Thanks and let me know if anything is unclear!

Unfortunately, your example lost me on the first roll... I don't see the combination in choosing the 1 and the 5 for 150 points. That would have me think that the roll with the 4 could be kept for 40 points. Also, I didn't see where getting a 5 or a 1 for the last roll would have yielded something.
Anyhow, if you look at what I did for the Yahtzee game, each possible combination has a function dedicated to testing for it. The difference with Yahtzee being that you have to choose which scoring element you use up for each turn, whether you earn that scoring element or forfeit it. Also keep in mind that I created that tangle of code when I was a youngin' in the programming realm, so there may be cleaner ways of dealing with things.
Since you appear to be automating the scoring process, you likely need to have something first detect that the "hold these" action has taken place and then do some evaluation on those held thru a top-down series of checks (meaning highest scoring combinations to lowest), and accept the first that fills the bill. I don't understand the logic as to why a 1 and a 5 score anything, but in any case, your code would need to have a test for that scenario. And if having the last die be a 1 or a 5 also scores, then you would need to retain something relative to that relkating to the 1 and 5 being selected earlier.

Quality assurance check list in XI/PI or work

Hi Experts,
what type of quality assurrance work or check list in XI/PI?
Friends please help me.
regards
elton
Edited by: eltonsaranya on Jun 27, 2011 9:02 AM

You don't dedicated/specifically need Quality Assurance Check List for PI. But you can have One dedicated section for QA for all points like General Points, Overview, Performance point of view, exception handling, Test conditions, also you can have Namestandards follwed or not etc in Technical Specification itself.
Regards
Pothana

G/l balances through cross check to view adjustment enteries

hi to all sap fico work force,
can any one provide theg/l balances through cross check to view adjustment enteries information, waiting for respond, thanks in advance.
regards,
supriya.thodimela.

FBL3N is the transaction to view all the G/L line items. In the selection screen, you can restrict to view the line items of a G/L account, based on several selection criteria like posting date, document date, etc.
Besides the standard selection options there is a three colored (red green blue) icon (Shift F4) to select from dynamic selections. When you click this icon, you can restrict further by document type and more. Here you can enter what was the document type that was applied for the adjustment entries. This way you can check the adjustment entries.

Cross check report for Ke25 data

I have uploaded planned sales volumes for 2010 for plant XX04 & XX03. I have confirmed these
numbers through T-code KE25 & it reflects these numbers correctly. Is there any other report where I can
cross check these numbers.
Thanks

Hi,
You can also view it in KEPM using appropriate planning package. Basically the plan line items are stored in table CE2XXXX (XXXX = operating concern) . The KE25 report basically extracts the data from CE2XXXX and displays in a user friendly form.
You can also create your own reports in KE30.
regards
Waman

Explain Plan understand technique & Query optimizing check list

Hello gurus,
Can some body help me with doc available or your experience to tell on how to understand Explain Plan & Query optimizing check list.
Thanks..

That's correct,
But unfortunately the institute is pretty far from home.. and travelling time will be high..
I am a working man..
Please suggest if some good book or link.
Thanks.

Check list field values using LINQ

I have to check if the CURRENT USER is already in the list USERS by comparing his AccountName to the list field ACCOUNTNAME.
If the USER is on the list I have to check if the field IsFollower is YES or NO and change it according to some conditions.
I think LINQ would be the correct way of doing this but I have no clue how to do that.
Any ideas pls, thanks

Hi,
Yes, you can query the list using LINQ.
You need to get the SPList Object firstly, and then you can query list item value using LINQ.
More information about how to check list field value using LINQ:
http://msdn.microsoft.com/en-us/library/office/ee538250(v=office.14).aspx
http://www.wolfsys.net/query-sharepoint-lists-with-linq/
http://geekswithblogs.net/TanviBlog/archive/2013/06/06/linq-in-sharepoint-and-querying-list-items.aspx
More information about how to use Server Object Model in SharePoint lists:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splist.aspx
http://msdn.microsoft.com/en-us/library/office/ms456030(v=office.14).aspx
Best regards

Check List for CR ( Chnage Request) And Type of CR's

Hi All,
I am going to work on Change Reqest in BI. So for going forward, i would like to know the Types of CR's and Check list of each type of CR. Please i need very urgent.Plz give your inputs as early as possiable.
Thanks & Regards,
Venkat
Edited by: vanarasi venkat on Apr 16, 2008 8:40 AM

Hi Venkat,
go through these links ...u can get the req info
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9]
[/people/evan.stoddard/blog/2006/01/03/sap-solution-manager-new-info-blog]
[https://websmp105.sap-ag.de/goinglivecheck]
here check on left for FAQs
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be]
go through this thread
[Is there a BW implementation checklist?;
regards,

Rollout cross check list

Similar Messages

Maybe you are looking for