Rollout Project Info Needed

Dear Experts,
Kindly send me some info and documents on Rollout project. Need some detailed documents or explanation.
Thanks in Advance,
Senthil

Hi Prasanth,
Need some documents on Rollout project in connection with solution manager. or in general roll out project document like what has to done and steps to be followed like wise.
Regards,
Senthil

Similar Messages

Need Information Regarding Rollout Project In Netweaver Portal

Hi,
Can anybody give me some information regarding how to rollout a project in Netweaver Portal or what exactly a rollout project is ?
If we are using Webdynpro for developing UIs , then what needs to be done on the Webdynpro side for doing the rollout .
I have been searching sdn regarding this but could not get any useful information .
Thanks a lot .

Hello Vijay,
<a href="http://www.sap.com/services/education/consultant/solutionacademy/index.epx">Here</a> you can find an overview of the different consultant training.
You have a track for Portal (<a href="https://websmp204.sap-ag.de/sapidp/011000358700003602072006E">link</a>) and also one for KM (<a href="https://websmp207.sap-ag.de/sapidp/011000358700003602162006E">link</a>).
Both can be done in a "technical" and a "development" flavor.
Regards,
Christophe

Project info help needed..

I can not find where I can view the entire project info size. I know how to view each clip info size but not entire project size. So where can I view entire project info size. Thanks...Newbie to FCE.

Thank you, Tom that was easy. I don't know why I could have thought that as well. Tom by the way when want to burn a video and slidshow all in in one DVD what are options do you use?

IDVD PROJECT help needed - file size

I have a new imac g5 and I used imovie to make a project. I uploaded my project in idvd 112 min and it says my project is 4.5gig??? and it won't let me burn this on a 4.7 gig single disks. It says I need a dual layer disk? Please help I don't know why I need another disk if I'm within the limit.

Hi pfruge,
Welcome to the Discussions.
Go to the iDVD's menu Project > Project Info, change the "Media type" to 4GB (Single-layer).

IDVD project info doesnt show content and wont burn properly

I am using iDVD 6 on a macbook. have successfully burned DVD's using iDVD in the past and now here is the deal I cant resolve. My imovie is first in DVD map and it is looped. It plays fine when played from this and other locations. I go to project info and it is .8GB for a 26 minute video on the DVD capacity.(which doesnt seem right.) When I burn it, it goes thru the paces and kicks out the DVD and it says current operation-done. In previous projects it has asked me if I would like to burn another copy. I press cancel and it says "cleaning up" and I end up force quitting iDVD. What am I doing wrong this time. i aprreciate any help, im racking my brain for hours. Thanks.

Hi a
And Your internal hard disk is Your Start-up hard disk ?
If so: Update following
• iMovie to 6.0.4
• QuickTime to 7.3.0
• Mac OS to X.4.11
Still problems: Do
• Start a new user/account and log into this
Still problems: Do
• Run Apple Disk Util tool and
Repair Permissions
Repair Hard disk (to do this You need to start Your Mac from a DVD or external hard disk
Yours Bengt W

Handling a big project - advice needed

Hi
I am using Premiere Pro CS4 to edit 1920*1080 AVCHD footage (3 hours in total) shot with a Canon HF10 camera. In that matter I have a three questions:
1) Since I don't have a Blu-Ray burner in my PC yet, I am chopping my movie up into several parts each with a length of approximately 30 minutes, so I can burn some DVD's with the movie. My question is then: How do I do this the easiest way? Do I make 6 different projects and edit the movie as if it was 6 independent movies, or is there any better way of doing this?
2) And how do I merge these 6 parts in one, which I will need when I get a Blu-Ray burner?
3) Would you think it is a bad idea to make such a huge project? I have tried several other programs to edit AVCHD with no luck - the programs always crashed at some point, so I am a bit nervous if a 3 hour project would be too huge to be handled properly even though Premiere Pro CS4 looks to be working good. So far I have been able to transcode 30 minutes footage to a DVD with success using Encore (haven't tried more yet). Then I burnt the ISO to a DVD with some freeware program and it looked amazing when I played it with my BD player.
In case you want info on my hardware I give it to you here:
Intel Core2Quad Q9450 2.6Ghz, 4 GB Memory, 1000GB Samsung F1 HD, GF8800GTS 512MB, Windows Vista Ultimate 32Bit
Please tell me if I am unclear about something or need to give you more information.
Thanks in advance :)

That AVCHD footage must be ***** to edit.
My P2 dvcprohd files are a gig a minute yet I get realtime playback with video's on 2 channels fullscreen uncompressed using a computer with just slightly higher - but almost the same - specs as yours. Using just a single SATA 640gb WD and my files are 4 times the size of your AVCHD files.
Hell now I can even playback the footage in After Effects realtime fullframe with now FX (something that comes in handy because I can use AE as my NLE if there isn't to much sound involved)
With big projects you need to split it down to 10-17 minutes parts. Once they get longer than that Premiere becomes sluggish. It's no problem putting all the 'projects' in to a feature length timeline just don't expect to do much editing when it's put together because it'll be real sluggish.
Render to an uncompressed still sequence because you can always restart where the render stopped if it crashes (and it's more likely to the bigger the project).
I'm finishing a feature that way and it's worked great all on CS4 (not that I'm happy with Adobe about Premiere CS4 at all). But I had around 20 hours of rough footage and with duplicates it's 4 terabytes or so.

Rollout project

hi friends,
can somebody explain in a rollout project
what will happen to entp structure?
what will happen to blue print ie as is and to be
what will happen to document types will it be all the same
whether the same team will be there
what are all mandatory things in a rollout project
if it is all same, we only do the configuration for the particular country related configurations or how
thanks for answering

Varada,
In RollOut Also The ASAP methodology covers 5 stages namely:
Stage 1: Project Preparation
Stage 2: Business Blueprint
Stage 3: Realization
Stage 4: Final Preparation
Stage 5: Go Live & Support (Rollout)
Stage 1-Project preparation
The core activities of this project include:
Establish project teams
Conduct kick-off meeting to confirm the project scope
Develop Project Charter
Perform review on all technical requirements of the project
Stage 2-Business Blueprint
The objective of this stage is to obtain a clear precise understanding of the detail
functional requirements
The major activities during this stage are as follows:
Develop System functional requirements
Develop Systems data conversion and authorization strategy
Identify training needs
Determine reporting requirements
Determine interface requirements
Initiate change readiness Assessment
Stage 3: Realization
The project teams are focusing on the configuration of the SAP modules using agreed functional requirements. The core activities that are being carried out at this stage include:
Configure SAP modules/develop customized modules
Develop forms, reports and interfaces
Establish profiles for authorization
Implement data conversion and migration plan
Setup training environment
Conduct awareness program
Develop change infrastructure; conduct change management activities relating to
communication and role definition
Stage 4: Final Preparation
Among the core activities to be carried out at this stage include:
Develop cut-over and go-live plan
Develop standard operating procedures
Develop offline procedures
Conduct end-user training for users at the pilot site
Complete the preparation of the production environment
Conduct communication and acceptance program
Stage 5: Go Live & Support (Rollout)
The final stage of the project relates to the roll out.. ie nothing but GO Live..
The last phase of the implementation project is concerned with supporting and optimizing the operative R/3 System, both the technical infrastructure and load distribution as well as the business processes. Activities such as the following are carried out:
Production support facilities are defined, for example, checking system performance on a daily basis
Validation of business processes and their configuration
Follow-up training for users
Signoffs, etc.
=====
Rollout Roadmap
The Rollout Roadmap has as its goal the creation of a local productive reference system and, in the case of distributed systems, the provision of a link to a central productive system in order to, for example, set up and maintain R/3 master records.
The Rollout Roadmap speeds up the implementation process in the local units, so that depending on the enterprise's requirements entire implementation series can be carried out. Redundant project activities can thus be pinpointed and avoided. The advantages of this roadmap are:
The realization of groupwide implementation standards, through an efficient rollout in the local units
A rollback procedure for the exchange of general experiences, which can then be incorporated into the template. In this way the changes are passed on to the local units quickly and comprehensively.
refer to the links below...
http://www.sapfans.com/sapfans/asap/be_08_e.htm
http://www.edgewater.com/Industries/Manufacturing/ManufacturingCaseStudies/caseStudies_finePaper.htm
REAWRD IF U FINDS HIS AS USEFUL..
Regds
MM

Automating Project Info in Preferences?

Hi,
Is there any way to automate the Project Info in Preferences?
It only appears when the project is open, as I create lots of
videos how can I automate all the info like web address, email
address, copyright info etc... instead of typing it every single
time?

Hi there
One option would be to create a seed project that contains all this information. Then when you need to create a new project you just open the seed project and peform a Save As.
Other than that, please alert Adobe using the Wish Form.
Click here to visit the Wish Form/Bug Reporting Form
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Project Info PDP

Is there a way to edit the Project Info PDP on Project 2010 in the following manner? I would like to add an explanatory description under the "Start Date" when a new project (EPT) is initiated in PWA.

Depending on how critical this need is, you could also consider using Javascript to add these decriptions. Here is an article that shows how to do it:
https://badalratra.wordpress.com/2013/02/03/javascript-code-to-add-custom-descriptions-underneath-project-field-on-the-pdp-page/
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

HELP: Burning double layer DVD does not work as expected by project info

Hi,
I have the following problem: I created an new project in iDVD and choose the following settings in the project info: Video-Modus=PAL, Coding=HighQuality, Format=16:9 and DVD-Typ=DoubleLayer. When I saved the project and open it again the project info dialog shows me the following amounts of used space: 1867 MB DVD-ROM, 4595 MB Diashows, 128 MB Menus, 0 MB Film, alltogether 6,48 GB and 200 minutes of duration.
NOW: When I choose to burn the DVD it first tells me that I need to use a double layer DVD because the project is too large to be burned to a normal DVD. If I press OK (having inserted the DL-DVD), I am back in the standard iDVD editing mode. If I then have a look to the settings in the project info it is as follows: 3733 MB DVD-ROM, 4595 MB Menus, 128 MB Menus, 0 MB Film, alltogether 8,31 GB and still 200 minutes of duration. This obviously does not fit to the 7,7 GB DL-DVD so I cannot make iDVD to burn my DVD...
QUESTION: What happend ? Why doubled the DVD-ROM space ? In fact what I can see is that there are several diashows doubled and even lots of picture more than once on the DVD. Could it be that there is a trash somewhere implemented ? I cut and pasted some of the diashows to a different place on the DVD...
Thanks for answers and support.

In fact what I can see is that there are several diashows doubled and even lots of picture more than once on the DVD.
Do you mean "slideshows" instead of diashows?
Did you add anything to the dvd-rom section of the DVD? If not, you may want to check this section to see what's going on.
Also what does map view look like? Does it show anything that may have been duplicated?
Please tell us your current ecoding settings.
In other words, is the encoding set to Best Quality, Best Performance, or Professional Quality?
Lastly, is this Dvd made up of of only slidesshows / images? Or did you also add a movie/s with actual video footage? And if so, what is the total playback / run time of this Dvd in hours and minutes? (keep in mind iDvd doesn't look at size/s but rather total QT playback in minutes; not to exceed 120 mins per SL Dvd-R and twice that amount for DL media).
Message was edited by: SDMacuser

Doubts with rollout project.

Dear Experts,
could you please through light on a Roll out project.
My company wish to have 2 more new company codes as a part of rollout project.
My company already been implemented the HR module.
As times comes to have new entites for furthur vivid picture of hr activities.
What configuration should we do for the process of entire rollout project.
Please advice.
Regards,
V SAI

Hi Dilek/sikindar,
Tthere are no changes in the policies and calculations of the Payroll and time mgt. and other activities related to other modules.How to access the same values or parameters for the newly created company codes.What is the node to add the previous configurations with newly created comapany codes.
What are the furthur steps to proceed after creating the enterprise structure and creation of organisational structure.
What are the changes we need to make for payroll india module.
Please advice.
Regards,
V Sai.

Questionnaire for rollout project

Hi,
I need to prepare SD questionnaire for roll out project.
Please help me regarding this.
urgent.
Regards
Prabudh

Hi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale

Details of Rollout Project

I want to what is a Rollout Project.
In this a Development i.e Custom Programs need to be developed.
Or is it a modification to a standard programs.
Could you please give me details of it.

Often the big groups have implemented SAP system only for certain companies of the group, when it wants to implement it for a new company it adapts an old SAP just implemented for the other companies.
This "adapting" process is the rollout project, so the main difference is it uses a system just customized.
Reward points if found helpfull.....
Cheers,
Chandra Sekhar.

HI all ,i am involving into sap hcm om,pa global rollout project for 6 countries.

om pa global rollout project for 6 countries, i have 6 company codes. how can i maintain number ranges for om objects with 6 company codes.
company code1     : om object number ranges from 1 to 10
company code2     : om object number ranges from 11 to 20
company code3     : om object number ranges from 21 to30
co code 4               : om object number ranges from 31 to 40
co code 5               : om object number ranges from 41 to 50
co code6                : om object number ranges from 51 to 60
how can i do this configuration.can you plz help me?

Hi Anand,
Standard SAP doesn't allow to differentiate between organizational numbers at company codes level. I think you would need to build user exit for the same.
SPRO> Personnel Management > Organizational Management > Basic Settings > Maintain Number Ranges > Customer Enhancement (User Exit): Individual Number Assignment
I hope this information helps.
Thanks and regards,
Vivek Barnwal

Can't Open "Project Info"

I am unable to access PROJECT INFO (command-I). Whenever I try to open PROJECT INFO, iDVD crashes and dumps me out to the Finder. I was able to access PROJECT INFO until a week ago. All other aspects of iDVD seem to be working properly.
I have tried creating new projects and have had the same problem.
I have deleted the iDVD & imovie preferences from the user perference folder AND boot disk Library (I have two physical drives). Rebuilt permissions. Also have erased iDVD & iMovie apps & reinstalled iLife '06 suite from master install disc and performed all of the current software updates.
I am running iDVD 6.0.3 (791)
Any suggestions?
Garry

from console.log after idvd quits:
Nov 28 12:28:39 garry-chuns-computer-2 authexec: executing /sbin/kextload
2006-11-28 13:26:24.373 iMovie HD[426] Looked for URLs on the pasteboard, but found none.
2006-11-28 13:26:28.721 iMovie HD[426] Looked for URLs on the pasteboard, but found none.
2006-11-28 13:28:26.444 iMovie HD[426] Looked for URLs on the pasteboard, but found none.
2006-11-28 13:39:16.212 iDVD[438] NSExceptionHandler has recorded the following exception:
NSRangeException -- * -[NSCFArray objectAtIndex:]: index (2) beyond bounds (2)
Stack trace: 0x954ee243 0x9264f2cb 0x926ac288 0x925deb2d 0x001a7618 0x001a6070 0x93349d88 0x933f7ce7 0x933f7a29 0x93328e16 0x9325c7fc 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
2006-11-28 13:46:40.363 iDVD[449] NSExceptionHandler has recorded the following exception:
NSRangeException -- * -[NSCFArray objectAtIndex:]: index (2) beyond bounds (2)
Stack trace: 0x954ee243 0x9264f2cb 0x926ac288 0x925deb2d 0x001a7618 0x001a6070 0x93349d88 0x933f7ce7 0x933f7a29 0x93328e16 0x9325c7fc 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
2006-11-28 13:47:34.537 iDVD[455] NSExceptionHandler has recorded the following exception:
NSRangeException -- * -[NSCFArray objectAtIndex:]: index (2) beyond bounds (2)
Stack trace: 0x954ee243 0x9264f2cb 0x926ac288 0x925deb2d 0x001a7618 0x001a6070 0x93349d88 0x933f7ce7 0x933f7a29 0x93328e16 0x9325c7fc 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Dual G4 1.25 Mac OS X (10.3.9)

Rollout Project Info Needed

Similar Messages

Maybe you are looking for