Rollover items don't show?

When I am using Captivate to record, it doesnt seem to
capture items that I have rolled over. For example, I may rollover
an icon, which shows a descriptive text label, but when I view the
captivate file, its not there. Can I make rollover content show up
after recording?

Hi AZAlan
One way to do this after you have recorded is to grab screen
captures of the rollover items. Then you open the slide where they
should appear and click Insert > Rollover Image. Specify the
image(s) you captured. Then size the rollover area where you need
it to be.
If you click Options > Recording Options... followed by
the Edit Settings... button to the right of the recording mode,
have you tried enabling "Convert tooltips to rollover captions"?
Maybe that will do some of what you need?
Cheers... Rick

Similar Messages

Rollover images don't show up

I have a menu in which the menu items change color when the
user rolls the mouse over them. I am trying to recreate this using
rollover images. I have inserted two rollover images on the slide.
Only the first one shows up. For the second one, you can see the
mouse change when you roll over the target area, but the image
itself does not show up. The image should appear in the target
area. The first and the second image are close but do not overlap.
Also, I've played with the order, and that doesn't seem to help.
Any ideas on how to fix this? Thanks!

Hi all
I'm updating this thread for anyone that may have been
following and anyone that may search later. I connected with Linda
and observed her project. Unfortunately, that failed to reveal
anything immediately correctable. So I asked her to send me the
project so I might have a play. Here is what corrected the issue.
The image used for the rollover was in .BMP format. While it
appeared just fine from the Library, it refused to show itself on
rollover until it was converted to a different format. I converted
from .BMP format to .PNG. After re-importing back into the project
as .PNG, the rollover magickally appeared.
Go figure! Rick

Downloaded items don't show until reboot.

Hello,
When I have downloaded something from the internet, for example a pdf file, it doesn't show. After rebooting the files are available to open, does anyone know how to solve this? Thanks

You need to fill in the "Album" info for the songs in order to have them appaer on your iPod under "Artists."

Items don't show in Applications, Documents, and random other folders in Finder?

Hello Mac community,
Within the last week I've encountered a strange problem in Finder, in which I cannot view my main Applications or Documents folder. I mean, I can click on it, and it takes me there, but the folders appear to be empty -- nothing shows up. When I "get info," the size of the folder tells me that they're still there, but that doesn't help me very much.
Thankfully, my Dropbox folder still shows up, and that's where I have most of my often-used files. This isn't too much comfort. I have to open files by searching for them in Spotlight or by clicking on the Stacks that I've made prior. I have a Macbook Pro early 2011, running OS X 10.8.2 (12C60).
Any help would be greatly appreciated!

dtsteinb wrote:
Tried that on my IPAD mini and it doesn't work. Can't connect to server is the error.
The post you're referring to is over 2 years old, and since then Google pulled the plug on Active Sync, which means you can't use Exchange to set up a Gmail account in iOS. But the good news is, since that time the iOS 7 account profile for Gmail has improved and actually works pretty well ... about the only complaint I have is that it does not support push, but I'm not too bothered by that limitation.

Some font weights don't show up in Illustrator drop-down menu

This problem is happening with more than one font (on a Mac, OS10.6.6, CS5), but as an example:
I have the Futura font family, all weights from Light to Extra Bold Oblique, in my Fonts folder in my Home Library folder. When I select type, and choose Futura in the Font drop-down menu, only 4 weights of the font appear in the drop-down sub-menu, rather than all of those installed....

I have the very same problem. Though, it also occurs after logging out and back in.
To clarify, "Front Window" and "Menu Bar" speakable items don't show up after login, even though they are selected in the Speech Preferences. Toggling Speakable Items off/on will make them appear. However, they are suppose be available immediately.
How to test it out:
1. Go to the Speech Preferences in System Preferences.
2. Within the Speech Recognition tab, choose the Commands tab and select "Menu Bar" and "Front Window". I have selected all command sets in that list.
3. Turn on Speakable Items.
4. In the round Speech Feedback window that appears, there is a button at the bottom with a triangle pointing down. This is its menu. You can open the Speech Commands window from this menu and see a list of command sets, such as "Speakable Items", "Application Switching", "Address Book", and so on. In particular, there should be "Front Window" and "Menu Bar" since they have been selected in Speech Preferences.
5. Logout.
6. Login.
7. The Speech Feedback window should appear after login. You might also have the Speech Commands window if you didn't close it before logout. If not, then open the Speech Commands window from the menu on the Speech Feedback window.
8. Notice the command sets for "Front Window" and "Menu Bar" do not appear in the listing.
9. Open Speech Preferences in System preferences. Choose the Speech Recognition tab, and then the Commands tab within that, if not already chosen. Notice the "Front Window" and "Menu Bar" command sets are selected even though they did not appear in the Speech Commands Window.
10. Perform the workaround: toggle Speakable Items off/on. Notice the "Front Window" and "Menu Bar" commands will now show up in the Speech Commands window.
11. Feel free to repeat steps 5 - 10 as often as you like. sigh 8-|
Is this what happens for everybody else?
iMac 1.83 GHz Intel Core Duo Mac OS X (10.4.5) 512 MB RAM

Calendar items added on iPhone don't show in Outlook

There are four different color calendars showing on my iPhone 3GS. The items I add from my work PC on my Outlook calendar are blue. The items I add to my calendar on the iPhone are red. The red items do not show on my Outlook calendar. I've tried showing only the blue calendar, and adding the item on my iPhone, but it defaults back to the red calendar. How can I get appointments I add from my iPhone to show on my Outlook calendar?

Thank you! I had done a search but didn't find that earlier thread. The calendar items posted from my PC were blue, so I switched my default calendar to the blue calendar. I added a calendar item on my iPhone and it showed up on my calendar as blue. Before it was showing up as red. I'm sure this will be in my Outlook calendar on Monday.

Keywords imported but don't show up with photos

I am not getting keywords to show up with imported photos. i've done a lot of searching on this and other forums to try to figure out what is different about my situation but to no avail. here's what I've deduced though:
the keywords will import if I deselect “Copy the items to the iPhoto Library”. But if I leave the default box checked", I will not get keywords associated with the photos.
(the rest of my discussion deals with a library where the imported photos ARE copied to the library)
Interestingly, the keywords ARE imported into iPhoto (if one looks at the keyword list); they just aren't attached to the photos (i.e. clicking <Get Info> shows no keywords, as opposed to them being there but just not showing up on the screen with the image). Most (but not all) of my imported photos show up in iPhoto without any keywords attached. Most Events are all-or-nothing; i.e. all the photos of the event either have keywords or don’t. At least one Event is a mix. I cannot make any sense as to why some do, as the ones that do will be part of an event that all the other photo's don't show the keywords; additionally, neither the ones with nor the ones without keywords share any common feature or change (e.g. edited, rotated, file type, keyword/tag name, etc.).
I'm a pretty basic user when it comes to photos (but with a fair amount of common sense and computer knowledge); not trying to do anything fancy here. I don't know much about photography, so I'm not manipulating photo settings on my camera and am not (purposefully/knowingly) manipulating the metadata directly from the file. So, I'm baffled as to why my system would be acting differently than any other "out of the box" iMac.
In case it matters:
-- the photos being imported originated from a Windows-based PC and tagged by Adobe Photoshop Elements. I have the same problem regardless of whether I export them (using Photoshop) to a file on the iMac or directly import them over the network from the PC using iPhoto.
-- (Using iPhoto Library Manager) I created another iPhoto library to see if the same thing would happen with photos imported to a different library -- same problem. (BTW, I checked the new library's Keywords BEFORE I imported to make sure the keyword "library" wasn't somehow replicated from the previous library.)
-- In one of your forum discussions, you said that these “copies” would be in the “Originals” folder within the iPhoto package, right? If so, then they are the same size as the files being imported minus a few KBs, presumably due to the lack of associated keywords.
I assume that these "copied" files are suppose to retain their keyword/tag info. Any ideas why they aren't and/or what I can do about it? I tried rebuilding the database too but that didn't do any good. I'm figuring on trying to reimport everything again, but I fear I'll get the same result.

Welcome to the Apple Discussions. First try the simple fix: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Launch iPhoto and see if the keywords show up. If not, then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

My thumbnails are not showing up next to the icons in finder. Also the back arrow and forward arrow as well as the list options don't show up. Any suggestions how to get them back?

In my Finder window, the picture icons that usually show up next to the items are not there. i.e. in my sidebar, the little pictures that are usually by the Application, Desktop, Documents, etc items. Also, the back and forward arrows, list items and tasks don't show as well. Any ideas on how to get them back?

Hello AgentScaber,
You'll likely need to reinstall Mountain Lion.
OS X Mountain Lion: Reinstall OS X
http://support.apple.com/kb/PH10763
Cheers,
Allen

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

Indesign CS5.5 can't select objects, they don't show in layers panel either

I received an .indd file from a client. There are certain objects that I can't select. I know they aren't locked because I can't select "Unlock all on spread." The weird thing is, the objects don't show up in the layer panel. If I uncheck the layer's eye, they disappear. But if I uncheck the eyes of all the individual objects within the layer, the objects I can't select are still visible. I'm attaching a screenshot. Can someone help please?

The items are on a mster page.
In the Pages Panel, go to the master associated with the page you're on, there you'll find the things you're after.

I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?

I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Logo Component - Design mode shows the edit component toolbar don't show "Edit" button

I just created a Logo component on my website following the CQ "How to create a Fully Featured Internet Website" guide.
I do create the logo component, edited the jsp page with the following code
<%@include file="/libs/foundation/global.jsp"%>
<%@ page import="com.day.text.Text,
                 com.day.cq.wcm.foundation.Image,
                 com.day.cq.commons.Doctype" %>
<% String home = Text.getAbsoluteParent(currentPage.getPath(), 2);
    Resource res = currentStyle.getDefiningResource("fileReference");
    if (res == null) {
        res = currentStyle.getDefiningResource("file");
    log.error("path is:" + currentStyle.getPath());
%>
    <a href="<%= home %>.html"> <%
    if (res == null) {
        %> Home Page <%
    }else {
        Image img = new Image(res);
        img.setItemName(Image.NN_FILE, "file");
        img.setItemName(Image.PN_REFERENCE, "fileReference");
        img.setSelector("img");
        img.setDoctype(Doctype.fromRequest(request));
        img.setAlt("Home Page");
        img.draw(out);
    %>
    </a>
Then, I created the tag "<cg:include>" in my jsp page, calling this jsp.
After all that, I created the Design Dialog for my logo component, then a "items" node under the tab1 node of the design dialog.
After this, finnaly, the widget node (absParent), under the items created before.
A lot of propertys later, I got my Logo object in the page, but the toolbar with the "Edit" button on Design mode don't show me the "Edit button"
Someone can tell me how to get the button there?
Is some property that I may have forgotten?
Thanks.

Basically, the edit toolbar has the same with as your component, which indeed is problematic for narrow components.
But you can work-around that with a basic CSS hack:
.cq-editbar {
    min-width: 200px !important;
    _width: 200px !important; /* IE6 */
This seems to be fixed in CQ 5.5.

Drop down menus, context menus and auto fill menus items don't appear!

I have FF4 beta, this started since FF4 beta 7. I work on Windows 7 ultimate 64 bit.
The problem is that I can't see drop down menus unless they have alot of items, nor context menus (like highlighting a text then right-clicking it), auto fill bars don't show the auto fill info entered before .. the menu itself appears, kinda. but it's transparent and the I can't see the items, don't know where to click to select the thing I want.
I haven't got this problem before 4.0b7 .. after I got it, I thought it was one of the plugins, so I disabled them all but still have the problem!
An image describing the problem is here, taken now on this page, I highlighted a text, and right-clicked it: [http://imgur.com/e9juh.png here] you can see the menu is somehow appearing, surrounded by the red border, but I can't see it!

Hardware accelaration disabled also worked for me. ATI Radeon 4670.
Seems the issue isn't set on one type of card. My flicker/vanish only did so on my secondary monitor.

Applications don't show on CC drop down menu

After using CC for a while, suddenly available applications don't show on the drop-down menu on an iMac; I can run the apps but they perform inconsistently, sometimes crashing, sometimes the cursor behaves erratcly or don't allow to create pdf files. I've tried reinstalling CC, reassigning the CC seat, but nothing seems to work. Any suggestions?

This worked for me.
Step 1:
Open Finder application.Click on Go>Go to Folder.
Type /library and press return key.
Then navigate to Application support/Adobe folder.
Right click on Adobe folder and select 'Get info'.
Under Sharing and permissions, click on Lock icon and enter
Administrator user name and password.Click on symbol, select Admini
strators and click on Add, then give 'Read and Write' permissions to Administrators.
Click on symbol again, select current logged in user name and click
on Add, then give 'Read and Write' permissions to Administrators.
Give 'Read and Write' permissions to Everyone, System, Admin, users.
Then click on Gear icon and select the option 'Apply to Enclosed items'.
Step 2:
Open Finder application.Click on Go>Go to Folder.
Type ~/library and press return key.
Then navigate to Application support/Adobe folder.
Please give full permission as mentioned above.
Step 3:
Open Finder application.Click on Go>Go to Folder>>Type /library and
press return key>>navigate to Application support/Adobe folder folder.
Locate the folder named AAMupdater and rename it to AAMupdaterold and
OOBE to OOBEold.
Step 4:
Open Finder application.Click on Go>Go to Folder>>Type ~/library and
press return key>>navigate to Application support/Adobe folder folder.
Locate the folder named AAMupdater and rename it to AAMupdaterold and
OOBE to OOBEold.
Once you are done with the above steps, you can try launching the
Creative Cloud desktop application.
If you still face the same issue, please try the next steps.
(These steps were not necessary for me.)
Step 5:
Click on the below link to download the cleaner tool.
http://download.macromedia.com/pub/creativecloud/cleanertool/mac/AdobeCr
eativeCloudCleanerTool.dmg
Select the product as Creative Cloud and CS6, then select Creative Cloud
desktop/Adobe application manager and select clean.
Step 6:
Once you are done with the above steps, login to
https://creative.adobe.com/products/creative-cloud and try downloading
the Creative Cloud desktop application.

Iphoto 7.1.3. - pictures don't show even though they exist & library=fine

Hi all
got a crazy problem here, that seems to have originated from updating to 7.1.3 last week.
I cannot see my photos anymore. I see events, photos, see the Info of a photo, but Iphoto displays blanks instead of pictures.
Examining the package shows me that the photos do exist in their managed folders.
I tried rebuilding the db, rebuilding thumbnails, etc. Nothing shows the photos.
I tried restoring older libraries of a couple of weeks old (timemachine) but they don't show anything also. This leads me to believe that this version of iphoto seems to be broken. Maybe I can try downgrading (don't know how though)
Anybody have some suggestions? any help is much appreciated.
-arjan

arjan
Welcome to the Apple Discussions.
This version of iPhoto works fine, it's your database that has been damaged.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Rollover items don't show?

Similar Messages

Maybe you are looking for