Rollover not showing in preview

CS4 Fireworks doesn't want to preview my simple rollover, nor does it export successfully. I've only got 2 states with hotspots, went to first state and clicked on behavior handle to choose "Add Simple Rollover Behavior" as directed by Fireworks CS4 Help. That option was not there! Instead chose, "Add Swap Image Behavior" and dialog box with pre-selected State No.2 appeared and clicked OK. I was supposed to be able to view action in the preview pane at this point, but nothing. Also F12 and nothing.
In the dialog box for "Add Swap Image Behavior" after top text "When rolling over the current slice, swap image in the slice chosen below:" there are two mysterious blank boxes, one square, the other rectangle, that take up most of the box but don't seem to do anything!?
I also tried the drag n' drop method, dropping on the same slice and yet I see no "blue behavior line representing a rollover interaction" as indicated in Help.
I also went direct to Behavior panel and used "+" to choose "Simple Rollover" instead of "Swap Image" (meaning I deleted the latter) for the slice in state1. Still nothing.
Each time, the preview panes shows a change in cursor from pointer to hand when I mouse over, but no change in image.
So what am I missing? Whatever it is, the Help directions are also missing it.

Add a slice rather than a hotspot and give adding the behavior another try.

Similar Messages

  • Cell background colors are not showing in preview - help? - DW4

    Hi,
    I created a horizontal table for my menu bar, and gave each cell a different color by creating a separate class for each with background image - image is a block of color created in Photoshop. In design mode they look they way I want, but in preview (Safari) the colors don't show up at all - the whole area is gray, and all I see is the text for each cell. Can someone tell me what I'm doing wrong? Alternatively, is there a better way I can set this up to have different colors for each button?
    Thank you!

    Here is the HTML code, and the CSS code for the menu bar follows: 
         ul.MenuBarHorizontal           
    ></style><style type="text/css"><!body {     background-color: #FFF;     font-family: Arial, Helvetica, sans-serif;}-->
        h1.  
         ul.MenuBarVertical          
    [about | MS_about.html]
    [fiction | MS_fiction.html]
    [dramatic work | MS_dramaticwork.html]
    [arts | MS_arts.html]
    [contact | MS_contact.html]
    [blog | MS_blog.html]
    <!-- end #header ><div id="mainContent"><p> </p><table width="950" border="0" cellspacing="10" cellpadding="12">        <tr>          <td width="106"><p> </p></td>          <td width="766"><p> </p>            <p>Miriam Seidel is a writer, critic and curator whose work is informed by her background in art, music and dance. </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p>          <p> </p></td>        </tr>        <tr>          <td colspan="2" bgcolor="#CCCCCC"><p>c Miriam Seidel 2011 all rights reserved</p></td>        </tr>    </table><script type="text/javascript"><!var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", );var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", );var MenuBar3 = new Spry.Widget.MenuBar("MenuBar3", );//></script></body>     <! end #mainContent --></div></html> 
    CSS CODE:
    @charset "UTF-8";
    /* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */ 
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding /ul.MenuBarHorizontal/ Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html /ul.MenuBarActive{     z-index: 1000;     font-family: Arial, Helvetica, sans-serif;     font-size: medium;     color: #FFF;     background-color: #FFCC99;     background-repeat: no-repeat;     left: auto;     top: auto;     right: auto;     bottom: auto;}/ Menu item containers, position children relative to this container and are a fixed width /ul.MenuBarHorizontal li/ Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) /ul.MenuBarHorizontal ul/ Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item /ul.MenuBarHorizontal ul.MenuBarSubmenuVisible/ Menu item containers are same fixed width as parent /ul.MenuBarHorizontal ul li/ Submenus should appear slightly overlapping to the right (95%) and up (-5%) /ul.MenuBarHorizontal ul ul/ Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible 
    /* Submenu containers have borders on all sides /ul.MenuBarHorizontal ul/ Menu items are a light gray block with padding and no text decoration /ul.MenuBarHorizontal a/ Menu items that have mouse over or focus have a blue background and white text /ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus{     background-color: #6C9;     color: #999;     font-family: Arial, Helvetica, sans-serif;     font-size: medium;     font-style: normal;     line-height: normal;     font-weight: normal;     font-variant: normal;     text-decoration: none;     text-align: center;     vertical-align: middle;     height: 50px;     width: 115px;}/ Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible{     background-color: #FFCC99;     color: #FFF;     font-family: Arial, Helvetica, sans-serif;     text-decoration: none;     font-size: medium;}
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) /ul.MenuBarHorizontal a.MenuBarItemSubmenu{     background-image: url(SpryMenuBarDown.gif);     background-repeat: no-repeat;     background-position: 95% 50%;     text-align: center;}/ Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) /ul.MenuBarHorizontal ul a.MenuBarItemSubmenu{     background-image: url(SpryMenuBarRight.gif);     background-repeat: no-repeat;     background-position: 95% 50%;}/ Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) /ul.MenuBarHorizontal a.MenuBarItemSubmenuHover{     background-image: url(SpryMenuBarDownHover.gif);     background-repeat: no-repeat;     background-position: 95% 50%;}/ Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover{     background-image: url(SpryMenuBarRightHover.gif);     background-repeat: no-repeat;     background-position: 95% 50%;}
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe /ul.MenuBarHorizontal iframe/ HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */@media screen, projection{     ul.MenuBarHorizontal li.MenuBarItemIE     {          display: inline;          f\loat: left;          background: #FFF; 
    Date: Mon, 20 Jun 2011 15:30:46 -0600
    From: [email protected]
    To: [email protected]
    Subject: Re: cell background colors are not showing in preview - help? - DW4 
    NEED to see the code.
    Otherwise it's like dialing a random phone number, and asking whoever answers, where you left your keys.
    >

  • Finder not showing .avi preview in columns

    Just a small problem, but annoying...
    With Finder set to column views, I used to get a small, playable preview of movies in last column.
    Suddenly, however, I don't get this preview with .avi files. MPG and MOV files give a preview, but not the AVI. I get the Play/Stop buttons and the timeline bar, but no preview image. Plus, it seems to take the finder ages to decide to not show the preview!
    Anyone got a solution to this?
    Thanks in advance!

    Check out the suggestions made in the section "More Like This",to the right side of your question.
    Best.

  • Why my child or subpages not showing in preview or when published?

    Why are my child or subpages not showing in preview or when published?

    Hi,
    Are you unable to see the child pages in the Menu? If yes, please make sure you select "All pages" in the Menu type dropdown. By default, "Top level pages" is selected.
    Cheers!
    Aish

  • Some fonts not showing in Preview

    I have received PDF files from clients and consultants in which a font does not show up on screen or print using Preview but is there when viewed and printed from Reader.
    Seemingly related somehow, after marking up a PDF in Preview and attaching to an email, themarked up text does not appear in the attachment preview onscreen in the email although it is visible and prints when the attachment is opened in Preview.
    Any help out there? Is this a Preview bug? Who knows how much stuff we have missed because of this problem.

    Are you saying the font won't show up in Preview along?
    What about other applications, such as TextEdit, does it show up there?
    Are the fonts deselected in your Font Book?
    Remember to mark as helpful or solved.
    -benny-

  • Bridge does not show image previews anymore on one of my drives

    Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

    I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
    Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

  • TIFFs does not show in Preview app or DVDSP

    I'm rendering TIFFs for subtitles using Belle Nuit.
    The TIFFs (either TIFF-RLE for Final Cut Pro or TIFF-DVD for DVDSP) are generated just fine.
    But they do not show when using the default Preview. Preview Inspector just says "No document"...(!)
    I can view them just fine in Photoshop, QuickTime player 7 or other apps.
    And the TIFF-RLEs works just fine in Final Cut Pro (but I can't look at the TIFFs beforehand using Preview).
    Now, the problem really is that DVDSP does not show the TIFFs/subtitles at all - and that's a problem. The STL Graphics file works just fine. The TIFFs are placed on the Track just fine, but they do not show at all.
    What might have happened? Checking one of the TIFFs, I have read/write access to the file.

    Problem solved - semms like Apple did a change in the system-wide TIFF importer, that caused the TIFFs generated to be seen as 0x0 pixels in size.
    The maker of Belle-Nuit have solved the issue in the 2.1.0b1 beta.

  • Character palette not showing type preview – CS5.5 (Mac)

    Hello, I had a problem that appeared literally out of nowhere with Illustrator CS5.5 on the Mac – I've been running 10.9.5 without issue until now when the contextual menu that usually shows a preview of the fonts available stopped showing all but two or three previews (attached an image to show the issue). I tried re-installing Illustrator which didn't make any difference, I then tried going to Illustrator > Preferences > Type and in the options there turned "Font Preview" off. The list of fonts then re-appeared but disappeared when that options was turned back on. I then tried altering the Font Preview size to small and that finally brought back the proper font previews in the contextual menu. They were also present when the large option, however they will not appear with medium selected as the font preview size. I then closed Illustrator, and trashed the preferences by holding down Command, Shift, Option and Control when starting Illustrator backup. I'm not sure if anyone else has had this issue or similar, but hopefully it'll help what can be a frustrating glitch!

    This is a problem on Mac OS. Go to System Preferences/Accessibility/Display and check the box that says Reduce Transparency.

  • Stacked Column Chart Value does not show in Preview or SWF

    I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
    I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
    Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

    Hi Rich,
    Try to rebind the data with the component and preview and see.
    Also check with other charts to see if you get the same behaviour.
    Try placing a table component and display those cell and see what values are there when you preview.
    There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
    Let me know if this helps.
    Thanks,
    Amit Mathur.

  • Fonts not showing in Preview

    I'm experiencing a most bizarre problem. All of a sudden last week Preview
    decided to suddenly stop showing pdf files properly - many characters are
    often missing and in some cases whole fonts (e.g. the italic version of a font) are missing. I can view the pdf in Acrobat (6) without any problem. I first noticed this with files I was creating using TeXShop, but it also happens when viewing pdf files using Safari. Rebooting the machine seems to work for a while, and then the whole thing starts over again. I can view the pdfs using Preview on other machines with 10.4.7 installed no problem. I've moved the plist and that had no effect. Running Console at the same time gives errors along the lines of the following (this was a particularly bad case where nothing appeared in Preview - the document was produced using TeXShop and used only Computer Modern fonts)
    Aug 24 11:01:33 ruppia /Applications/Preview.app/Contents/MacOS/Preview: can't find glyph 0.
    Aug 24 11:01:33 ruppia /Applications/Preview.app/Contents/MacOS/Preview: can't find glyph 0.
    Any advice, suggestions, thoughts on how to fix this would be most appreciated as it is getting annoying to reboot my machine once or twice a day (it reminds me of using a W**** machine).
    Thanks,
    Adrian
    G5   Mac OS X (10.4.7)  

    Hi Mark,
    Well, something is corrupt. The problem remains even after signing on
    as another user. Now, another machine (also a quad core G5) is having
    the same problem. This second mac has not shared files with the first one. Sometimes the glyphs from the fonts are just not
    there, and at other times they are replaced with symbols.
    One can immediately view the pdf properly and without error by opening it
    with Acrobat.
    So this problem is intermittent (it goes away for a while after rebooting),
    occurs whenever pdfs are viewed with Preview (e.g. from within Safari
    or straight loadad into Preview). This is getting very very annoying.
    I'm begining to think that only a total re-install will solve the problem,
    but since it is now happening on a second machine, I'm worried that
    something more insidious is happening.

  • Pushpins not showing in preview and hence not showing on embedded map

    have imported KLM file OK after finding import only works in internet explorer but when i click share and look at preview the pushpins aren't  showing and the same when i embed into website just the base map .
    Have i missed a process ?

    Have you specified a custom icon in the KML styles? If so, is it a full URL path of a relative path. If it is a relative path then it will be looking on the Bing servers for the image where it won't be and thus will not render.
    Also, collections cannot be used outside of the Bing Maps consumer site in embedded maps.
    http://rbrundritt.wordpress.com

  • Firefox 21 is not showing theme preview images

    In Firefox 21 for Mac OS, there is no longer any preview image, which is usually a little screenshot of the left end of the toolbar, shown for a theme when you click the "More" link to get more information about the theme. The only image there now is the theme icon. Where did that preview go and why is it gone? The preview images are still in the .jar files in all the themes I have, so they are still available.

    Try to delete the addons.sqlite file in the Firefox profile folder.
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder
    It is also possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar ("Find Updates" button in older Firefox versions) to check if there is a compatibility update available.

  • Proper Data Not showing in Preview Mode

    Hello,
    I'm using the Dashboard Design tool to create a dashboard with Input controls on 2 stack column charts.
    There are 7 Input Targets  pointing to 1st stack column chart, the SUM of all these targets need to be populated on one of the values in the second chart.
    e.i. Two stack column charts=Revenue By Month and Revenue By week
    Target Inputs  are pointed to Revenue By week, so target's which are assigned to each week of a certain month need to Sum and populate in 'Revenue by Month' chart, on top of the corresponding  month.
    I have all the logic inputted, when i edit values in the excel sheet, changes are occurring, all values are being populated in both charts. However, when i Preview the dashboard and input targets i am only seeing targets populating in "revenue by Week"  and 'Revenue By Month" is not populating any target data.
    Any idea's on why this might be?
    Thanks in advance for any feedback

    Hi Zena,
    It looks something is breaking within the formula or logic. Try the below steps to narrow down:
    1. Preview the swf in Xcelsius.
    2. Take the snapshot of data in Excel( File->Snapshot->current excel data).
    3. Check the data if showing correct in the excel sheet.
    This would also help you isolate which formula or function is breaking.
    Thanks,
    Amit

  • Animation does not show when previewed or published

    I have an animation that appears to be working, and shows in edit mode, but that does not appear at all when I preview or publish. It is a countdown clock I need to an activity.

    Hi there
    What version of Captivate are you using?
    If it's version 4, note that you may choose an Actionscript version to use.
    Click Edit > Preferences...> Project node > Publish Settings node.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Data from repeating group not showing in preview

    Hello experts,
    I would like to consult with you regarding a problem I have in BI publisher.
    I have tried creating a delivery receipt using BI publisher and when I preview it in word, everything is fine.
    The problem is that when I finally upload to BI publisher and try to view it there, the data that is supposed to show up within the repeating groups are missing.
    I have already validated the template before uploading and they look fine.
    I also am doubtful that the cause is because of a lack of data source because I have some fields that are outside the repeating group, but they have been retrieved without any problems.
    I have created a similar report using an older version of the XML Publisher and I didn't encounter a problem like this. I have also tried searching online but nothing really nails the problem that I am having. Do you have any insights regarding this?
    Appreciate your soonest response on this. Thank you!
    ~Jovee

    Hi sam thanks...I can see that data in extractor but not in PSA , that means it should not be in tra str /update rules/. the problem must be in extractor ...please help how to get this date in PSA as is...
    I have one more issue, when Iam loading the data from PSA to cube the data was half loaded and then the remaining half has yellow status in monitor...when I checked in simulation mode the following message is coming " Enter rate USD / rate type M for 30.03.2007 in the system settings" do you have any idea on how to fix this ?
    thanks
    Edited by: sam on Jan 25, 2008 9:17 PM

Maybe you are looking for

  • Utility to export selected data from an SQL Query?

    I would like to know if there is any utility available in Oracle that I could use to export data selected on the basis of a query? Our requirement is to export the selected data to .dat file. This should be besides imp or exp built-in utilities avail

  • How do I install snow Leopard?

    Greetings, I had downloaded snow leopard to my Macbook and in order to install it, I need a cd, but I looked up alternatives and they said i can partition my hard drive. Im currently running 10.5.7 and whenever i try to partition my MAcintosh HD it a

  • System Recovery disk for Windows 8.1

    Hi, I have upgraded my pc from Windows 7 to Windows 8. Every thing went ok. Now I have upgraded it to Windows 8.1. So far every thing went fine. However, can some one tell me how I can create a System Recovery Disk at this stage? I have managed to cr

  • Profit center field in FIBLFFP- free form payment

    Hi, We need profit center field in the screen of FIBLFFP as it is not present currently in the t code FIBLFFP. We needed this field as New G/l has been implemented and document splitting is active based on the profit center but we have not marked man

  • Default value to Table Control?

    DearAll, How to assign a default value to any field of Table Control at runtime? Regards, Dharmesh