Rollover problem when page viewed in IE7

Has anyone else come across the same problem:
I have made a navigation bar that uses rollover images in
Fireworks.
The nav bar works fine when viewing the page in IE6 but when
viewed in IE7 the rollover image seems to try and shrink by one or
two pixels producing a squashed effect.
I have tested this on three different machines running IE7
and all of them produces the same problem, viewing the same nav bar
in IE6 is fine in all three.
Any advice would be appreciated.
cheers
Matt

Matrix16;
Can you provide an example url? Tom Unger

Similar Messages

  • A problem when WebHelp launched in IE7.0

    We got a very serious problem when WebHelp was launched in
    IE7.0.
    We connected to the appointed locations in our applications
    by using bookmark of WebHelp.
    The computer code which we used in out applications such as :
    "C:\Program Files\Internet Explorer\IEXPLORE.EXE
    \\device\HHH0\Webhelp\HHH0HELP.htm#HHH0D010.htm#BLK01_HISTORY_NO"
    When WebHelp was launched in IE6.0, it is normal and can show
    out bookmark "BLK01_HISTORY_NO" in HHH0D010.htm correctly.
    But in IE7.0 it is abnormal and can't show out
    "#HHH0D010.htm#BLK01_HISTORY_NO" in the URL of IE7.0.
    It's look like can't connect bookmark "BLK01_HISTORY_NO".
    Please help us to solve this problem, and thank you very
    much.

    I wasn't familiar with command.exe so I looked it up in
    Google. That seems to suggest it is spyware! I am guessing that it
    may well be a valid method but one that has been hijacked. Be that
    as it may, could it be that there is something in IE7 that prevents
    command.exe from running ? I am not sure from your first post
    whether it fails on all calls or just bookmarked calls. If it is
    just the latter it probably rules out this train of thought.
    Outside my area but you or your developers may want to do the
    same Google search and see if it leads you anywhere.

  • Problems when viewing page in IE but not in Firefox - Help

    Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver. It looks fine on my Mac but when viewed on a PC in IE it appears as though there are lines or gaps between the cells of my table. How do I fix this? How can I make sure this doesnt happen again? For reference, the problem can be viewed here: http://www.amscattle.com
    Thank you for any and all help!
    SC

    Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver.
    Bad news - that action alone accounts for some significant percentage of the posts here on the forum.  The truth of the matter is this - the code that any graphics application writes is not usable for anything other than rapid prototyping.  This means it's not suitable for any production work.  Read this to discover one of the several reasons why that is the case -
    http://www.apptools.com/rants/spans.php
    Your gaps are a definitive proof of the brittleness of such table layouts.
    A much better approach would be to use a graphics application for what it does best - make graphics.  Build the page in DW.  Read this to see a suggested method - http://www.apptools.com/examples/pagelayout101.php

  • I am unable to view google ads running alongside and under videos on YouTube. This is only a problem when I use Firefox. If I use another browser, I can see the ads. I do not have adlock as it does not appear in my plug-ins/add ons. Please help..

    I have been using Firefox for about two years. For about a month now I have been unable to view any Google advertisements that run on YouTube pages alongside and under videos. This is important for my business. I would like to stay with Firefox, but this is only a problem when I use Firefox and is not a problem with Internet Explorer or Google Chrome as I checked. I tried uninstalling Firefox and all plugs ins and add ons and then reinstalling it. This did not work. Firefox seems to be blocking the Google codes that enable the ads to run on the pages. I look forward to your help. Thank you.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • Discoverer Plus - Problem with Page Orientation when printing pdf's

    Hi,
    When printing pdf's in Disco Plus I have a problem:
    My workbooks are a mixture of landscape and portrait pages.
    I am printing the entire workbook and then using cutepdf to produce a pdf.
    If I print to paper I get the correct landscape/portrait settings.
    If I print to pdf then landscape pages appear vertically when I view on screen so that the text is running from bottom to top of the page.
    So it is picking up th portrait/landscape settings from the individual worksheets but cutepdf has not realised that the pages are landscape so they appear on the screen vertically.
    This was not a problem on discoverer desktop so I am confident that this is not a problem with cutepdf.
    Any thoughts?
    Justin

    Thanks 2257648922,
    Version details are as follows:
    OracleBI Discoverer 10g (10.1.2.3)
    Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
    Discoverer Model - 10.1.2.55.26
    Discoverer Server - 10.1.2.55.26
    End User Layer - 5.1.1.0.0.0
    End User Layer Library - 10.1.2.55.26
    Oracle Database 10g Release 10.2.0.4.0 - Production
    Copyright © 1999, 2005, Oracle. All rights reserved.
    So I assume that means my version doesn't have the bug you mention.
    Any other thoughts would be appreciated.
    Justin

  • Acrobat X: Option to hide the dotted line in between pages when viewing in 2 page view?

    Acrobat X: Anyone know if there is an option to hide the dotted line in between pages when viewing in 2 page view?  So that the 2 pages can look seemlessly joined, with no gap and no dotted line?  This would be useful when viewing PDF magazines or books in which 2 pages join for a larger picture.

    Create a Page 0 item which will be available on all pages.OMG yes I can use items in page 0 ! I should have think of that :/ Shame on me.
    Application item values can be set from JavaScript using AJAX and an On-Demand Process.Yes I already tried ajax with ODP, my getappitem() function works but my setappitem() function won't assign value to application item, but it's not a problem now, I removed the ajax part and I will use page items :D
    Thank you fac586.
    Yann.

  • The contents of some yahoo mail e-mails does not display (except using No Style page View, or when doing a Reply), but IE works fine.

    For some (but only some) incoming Yahoo e-mails, Firefox does not show the text of the e-mail. I can see the text with the No Style page view. It also appears when I do a Reply. And, FYI, IE (both 8.0.7600.16385 and 8.0.6001.18702) have no problem with the same e-mails.
    == URL of affected sites ==
    http://mail.yahoo.com

    Executing a refreshing read all query, based on the required locations, on UnitOfWork A, after UnitOfWorkB has committed will update the vendors within the UnitOfWorkA, including those that may have been added to a location. This is most likely the easiest to implement. For efficiency you may wish to use your Read Only Session to execute the refreshing queries for the Vendors. By performing the query based on the possible Locations you will retrieve all of the available vendors, including those newly added.
    uow.refreshAllObject(collectionOfLocations);
    ..or
    ReadAllQuery query = new ReadAllQuery(Vendors.class);
    query.refreshIdentityMapResults();
    query.setSelectionCriteria(query.getExpressionBuilder().get("location").equal(location));
    uow.executeQuery(query);
    --Gordon

  • Printer Driver Problem?  Page margins shift when using paper tray vs. manual feed

    I am printing to an Apple LaserWriter 12/640 PS. The printed page and page margins are PERFECT (WYSIWYG; "What you see is what you get") when printing either to: (a) the MANUAL FEED TRAY of the Apple LaserWriter 12/640 PS; or (b) PDF to view on screen.
    HOWEVER, when printing to the LaserWriter using the (ordinary/usual) paper cassette (you know, the thing that holds the 200+ sheeets of blank paper), two margin problems occur: (1) the uppermost portion of page content is shifted down 3/4" (maybe closer to 11/16") vs. its position on the manually fed paper.  This, in turn, causes the botttom portion of the page content to run off below the printed page.  (2) The "unprintable region" on the right edge of the paper expands from 1/8" with the manually fed paper to 7/16" when using the paper cassette.  This shows up as an extra 5/16" (7/16" - 1/8" = 5/16") of white space/missing page content on the right edge.
    The problem is consistent and reproduceable.  It happens with cassette fed output from Safari, Word 2011, Acrobat X, TurboTax, Quicken Essentials for Mac, and TextEdit.
    BIG problem when printing long documents whose content and margin settings I cannot control (e.g., third-party documents from Acrobat, anything from Quicken Essentials or TurboTax, pages from Safari, etc.).  The only workaround is to feed everything manually (UGGH!).
    I suspect the printer driver is faulty since the problem detailed above happens with so many applications.  Is there a way to edit a plist (using the application/utility "Pref Setter" or similar) to overide the driver's margin settings?
    I believe the print driver is "Apple LaserWriter 12/640 PS v2015.105" (from Sytem Prefences->Print&Scan->Options and Supplies->Driver).
    Any help greatly appreceated.

    Thanks!  It works perfectly!  I even saved my original "oversize" document by printing it to PDF with the scaling so the problem is permanently cured, at least for this document.

  • Safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

    safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • What does the red text mean when I view the Page Source of a page I am developing?

    I am using Dreamweaver 8 to develop a simple web page. When I view the source code in Firefox, it marks mistakes (i think) in red text, like if i forgot to close some code. However, it also marks all the /'s red that Dreamweaver puts before closing a section of code. You can see my page at acoustiyah.com. View the page source in Firefox and you'll see what I mean. I can code this by hand without those slashes, but do I need to do that? Why are those forward slashes red?
    Thanks

    Thanks Scott,
    So those slashes will not cause a problem in Google search rankings or something like that? There must be some reason that Firefox doesn't like them, right? Or is it just because the Firefox dictionary isn't expanded enough yet?
    - ljh

  • Hi, i have an other problem, when people will visit my website they couldn't come back to the home page

    Hi, i have an other problem, when people will visit my website they couldn't come back to the home page

    Hello,
    Problem is in Plan mode.
    Please follow the steps below and you should be all set.
    1. Go to Plan View.
    2. Right click on page "ACCUEIL"
    3. Select "Menu Option" > "Include Page with Hyperlink"
    4. Save the file and then try to preview.
    You should be all set.
    Regards
    Vivek

  • Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

    Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
    My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture  the partial pageload then I can tell jquery to run the Muse formating routine.

    Jackie,  I am having the same issue and agree that it obscures our site analytics.
    I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that).  Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
    I hope there is a way to fix or block this.

  • Problems with Discoverer Viewer and the printable page

    Hi,
    I have a problem in Discoverer Viewer. I run a workbook, see the results and I click on "Printable Page". I set the page setup options to "Portait" and "100% scale". I preview the workbook in a PDF file and it's ok, I see the results in "Portait" and "100%".
    I close the PDF file and I click again on the "Printable Page". This time, I set the workbook to "Landscape" and "20% scale". I preview the workbook in a PDF file and it's NOT ok, the results are still in "Portait" and "100%". And the date/time in the workbook is the time when I run the workbook the first time. So, it's seems like a browser cache problem. The problem repeats until I clear the brower cache. At that moment, the workbook will take the page setup that I set at this time. However, it will be the same workbook with the same results until I clear the cache once again.
    If I save the PDF file on my Windows Desktop and I overwrite it each time, it's ok.
    Can somebody help me on this??
    Thank you!
    Mathieu

    Hi Michael,
    I'm clearing the browser cache by going in Tools -> Internet Options. In the "General" tab, I click on the "Delete files..." in the "Temporary Internet Files" section" (middle of the window).
    But I don't indicate that Discoverer is saving my printable page changes. I say that the first time I run a workbook, Discoverer saves it (the results) in the "Temporary Internet Files" folder in a PDF file. Each time I run the same workbook after that, Discoverer don't overwrite the file in the "Temporary Internet Files" folder. He takes the PDF file that is already there and show it to me. So, the results are the same even if the data has changed. It does this until I clear the browser cache (it deletes the PDF file in the "Temporary Internet Files" folder).
    Do you understand?
    Regards,
    Mathieu

  • How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

    Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

    See [[Firefox keeps opening many tabs or windows]]

  • Design problem when using Area Group Page -- BSP

    We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
    The problem:
    When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
    The strange thing is that if we refresh the iview the portal design is inherited.
    Why did it not work when opened at first?
    'Support portal integration' is ticked of in the BSP application.
    'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
    We are running ERP2004/WAS6.40.
    Anyone with the same experience?
    Regards
    Bjorn

    We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
    The problem:
    When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
    The strange thing is that if we refresh the iview the portal design is inherited.
    Why did it not work when opened at first?
    'Support portal integration' is ticked of in the BSP application.
    'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
    We are running ERP2004/WAS6.40.
    Anyone with the same experience?
    Regards
    Bjorn

Maybe you are looking for