Rollover Slidelet does not function when the trigger & display areas overlap

Hi everyone,
I am trying to use a rollover slidlet where the user hovers over a specific area (my target area) and then an image appears within that same area; thus I want my target area and display area to be the same. Then when the user clicks on this same area, I also would like the slide to continue onto the next slide. The technique works fine when the trigger area and and the display area DO NOT overlap, but once they do the image in the display area no longer appears and my mouse begins pulsing. Does anyone know how I can get the slidelet to behave like I want it to? Or know of any other way I can accomplish this? Advanced actions?
Thanks so much.

Indeed, you cannot have Rollover area and Rollover slidelet in the same place, very annoying.
Advanced actions cannot be triggered by a rollover event, except for Rollover slidelet, and that is the issue. If you really want a hover over effect, the only way I see is using the Eventhandler widget from InfoSemantics, it is not free:
http://www.infosemantics.com.au/catalog/widgets/interactive/wdgt_event_handler_01
Lilybiri

Similar Messages

My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.

My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.

That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

How to block the 'save' function when the required fields are not filled?

Hello, Everyone
I am new for this scripting. My question is:
How to block the 'save' function when the required fields are not filled?
I designed a PDF file with some required fields and I do not want the user to save the document until all required fields are filled. My idea is to write some scripts in Willsave method like:
if (this.getField("Family Name").value == ""){
app.alert('You should fill the Family Name field firstly!');
But I do not think it works as finally the document is saved after all.
Please help me on that!
So much thanks.

Dear Randybearwang,
I am a Rocky myself and I know how though it is to establish some good codes. Since I created some forms with validation options myself I might have a code for you. The code also creates an alert box (Yes/no option) if the user chooses yes the form will be validatet, if he chooses "no" the alert window will be closed.If everything is filled out correctly the form will be saved otherwise the textbox will be higlighted and gets focus.
If you need further assistance , please let me know
Have fun with the code.
P.s I don´t know how to upload the "PDF" document. I wrote you an email, please get back to me if you still need the file.

Hey ! I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is locked

hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is locked

sounds like a hardware failure. Return the phone to Apple.

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Just bought "the Great Gatsby" at iTunes but it does not play, all the other movies are playing

just bought "the Great Gatsby" at iTunes but it does not play, all the other movies are playing - any ideas

Hello cf-design,
You may need to delete, then redownload the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
If you're still unable to watch the movie, please report the issue to the folks in the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

TS3899 Why do I keep getting emails downloaded over and over again. It seems that iCloud does not recognize when the emails have already been downloaded to my iPad.

Why do I keep getting mails from iCloud over and over again? It seems that iCloud does not recognize that the emails were previously downloaded.

Does the iPhone NOT tell iTunes if you've played a track or not?
Yes, but the entire track must be listened to - until the track ends.
A song is not marked as played until the song has completed and the iPod starts playing the next song. The song must be played until the very end, and the same with a podcast.

HT4910 My iCloud contact list does not contain all the contacts that are in my phone. If I delete one from my phone it will delete it instantly from the iCloud contacts. But how do I get all those other contacts on my phone to the iCould on my Windows c

My iCloud contact list does not contain all the contacts listed in my iPhone 5S. If I delete a contact from the phone it instantly deletes it from the iCloud on my PC. But my PC iCloud list is lacking many of the contacts on my phone.

And which account did you enter these contacts in?
On My Mac
or
iCloud?

"The file you selected does not exist" when the file definitely exists?

Hi all,
Using Contribute CS3 against Contribute Publishing Server--
I have the site uploaded and set up within Contribute and
CPS. But I am experiencing consistent "The selected file
does not exist" errors whenever I try to open most
documents within the site. I click the "Choose"
button, navigate to a file -- I can see its contents in the
"Preview" box within the Choose dialog -- and
when I click "OK", I get that file does not exist
error.
This is happening with most but not all files in my site
tree. Trying to find a common denominator, it certainly does seem
that files which trigger this error are all templated files.
Non-templated files open fine.
Contribute is configured to talk to the server (IIS) via
WebDAV.. Am trying to get the sysadmins to enable FTP to see if
this behavior also shows up then, but have not been able to get
this done yet.
Thanks all :-)
Reuben

Would I have been better off posting this in the General
Discussion section? Could the moderators move it if so,
please?

Dialog Box does not function when called a second time

I have created a dialog box that only seems to work once in a larger application. The box is designed to be a MatLab code debugger. My idea was to allow a user to interactively create/debug Matlab code from LabView using ActiveX automation. Anyway, I have created a test vi that uses this dialog box twice. The first time it is called it functions as expected, but the second time nothing on the front panel (of the dialog box) responds and I cannot close the window or interrupt the vi. I am using LabVIEW 7.0 on Windows 98. Please see the attached vi's. MatlabDebugger.vi is the dialog that's causing the problem. Matlabx2.vi is the sub vi that handles the ActiveX automation. Debuggertest.vi is the test v
i in which the dialog will not word a second time.
Thanks in advance for any help or suggestions.
Attachments:
Debuggertest.vi ‏51 KB
MatlabDebugger.vi ‏303 KB
Matlabx2.vi ‏361 KB

The problem is caused by the nested event structures; you have an event structure inside an event structure, acting on the same controls. When the main one reacts to the cancel the other one get's stuck...so on the next call the main event structure just halts due to the stuck event structure inside it. It's not obvious why this is a fault, you may be able to spot it now that you're on the track though.
MTO

Powerbook does not sleep when the lid is closed

my tibook does not go to sleep when i close the lid. the screen stays on when the lid is closed. the screen was replaced a few months ago. i have to hit the power button and choose sleep or choose sleep from the menu. does anyone know how to fix this. Thanks.

Hi, fatchance. You have a hardware issue. The reed switch that puts the PB to sleep when it is closed is a two-part device. The latch mechanism in the main body of the Powerbook contains a magnet (which you can detect by moving a paper clip over it), and the switch itself is located inside the small latch opening in the display bezel. When the display is closed, the magnet is supposed to actuate the switch, putting the PB to sleep. If that isn't happening on your PB, the switch is broken or its wiring is damaged. Either way, the remedy will be to replace the entire display assembly. It's made not to be disassembled. Most technicians won't do so, because of the great likelihood of damaging the display housing/bezel or the display itself while prying it apart (it's epoxied together). Since the display is the PB's most costly part, replacing it merely to fix your reed switch would be a poor bargain, and I can't recommend it. Just put the PB to sleep manually or set a suitable sleep delay in the Energy Saver control pane instead.

The type or namespace name 'Reporting' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

I have a Windows app that was built some 7 years ago on a WinXP machine using VS2005. It uses Crystal Reports for the reporting. We recently got new machines with Win7 x64 and I installed VS 2013 Pro. I moved the app to my machine and upgraded
it to that VS version. It previously had a .NET Framework target of version 2.0. I changed the target to version 4.5.
I want to use the MS Reporting instead of Crystal Reports. However, I cannot get the ReportViewer control to show up in the Toolbox.
I downloaded and installed the ReportViewer Runtime 2012. I installed the ReportViewer using the NuGen GUI and console. I tried adding the control to the Toolbox using Tools > Choose Toolbox Items... but it never shows up after I browse to
the Microsoft.ReportViewer.WinForms.dll file and select it. I manually typed 'Microsoft.Reporting.WinForms.ReportViewer' and the intellisense came up fine. But when I build the project I get the error shown in this post's title.
I'm at a complete loss. I've searched all over and tried everything I can find on the subject with no luck.
Can anybody help?
Thanks.

Thank you for taking the time.
The Report Viewer will not appear on the Toolbox, even with references to that assembly. However the Crystal Reports viewer IS in the Toolbox.
I think it may be because Crystal Reports is installed and integrated? I don't know. I just can't get it to work.
Thanks again.
Hello,
From
ReportViewer Controls (Visual Studio), we could get that ReportViewer Controls are included in VS2013, that means we don't need to install that control manually.
To confirm whether this issue is related to your Visual Studio or Crystal Reports, I would recommend you consider testing it with the following ways.
1. Create a simple windows form application, and open a form designer window, and check whether reportviewer is inside the tool box.
If it is available, then we could focus on your project to narrow down this issue.
If it is still missing, we could test it with #2.
2. Uninstall Crystal Reports and disable all add-ins of VS2013, and if possible, you could also uninstall and reinstall VS2013 to make sure the environment is clean enough. Next repeat the steps of #1.
It will be much helpful if you could share the detailed results with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Experiencing "The type or namespace name 'DirectoryServices' does not exist in the namespace 'System' (are you missing an assembly reference?)" compilation error

I am just starting to implement a new user login authentication process wherein after prompting user for username & password, I hope to authenticate them againts our company Active Directory user data. Since I am just starting, I only have very few things
done at this point which is how I wanted to work on this so that my development environment is still at its simplest state.
I am using the following for development:
MS-Visual Studios Professional 2013 Version 12.0.30501.00 Update 2, and
MS .NET Framework Version 4.5.50938.
Here are my project solution's current items:
Web.config:
<?xml version="1.0"?>

<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
</system.web>
<system.webServer>
<defaultDocument enabled="true">
<files>
<add value="Login.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
Web.Debug.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">

<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />

</system.web>
</configuration>
Web.Assemblies.config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="false" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<assemblies>
<add assembly="System.DirectoryServices, Version=4.0.0.0, Culture=neutral PublicKeyToken=b03f5f7f11d50a3a"/>
</assemblies>
</system.web>
</configuration>
Login.aspx:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div id="loginForm" style="height: 562px; width: 399px; margin-left: 0px" title="Login Form">
    
<asp:Label ID="loginPageLabel" runat="server" Font-Bold="True" Font-Names="Arial Black" Font-Size="Large" Text="Please Log In"></asp:Label>
<br />
<br />
        
<asp:Label ID="loginUsernameLabel" runat="server" Text="Username:"></asp:Label>
   
<asp:TextBox ID="loginUserNameTextBox" runat="server" OnTextChanged="loginUserNameTextBox_TextChanged" Width="213px" Wrap="False" AutoPostBack="True" TabIndex="1"></asp:TextBox>
<br />
<br />
        
<asp:Label ID="loginPasswordLabel" runat="server" Text="Password:"></asp:Label>
   
<asp:TextBox ID="loginPasswordTextBox" runat="server" OnTextChanged="loginPasswordTextBox_TextChanged" Width="212px" Wrap="False" AutoPostBack="True" TabIndex="2"></asp:TextBox>
<br />
<br />
                           
<asp:RadioButton ID="loginUAradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginUAradioButton_CheckedChanged" Text="TUPSS Associate" AutoPostBack="True" TabIndex="3" />
  
<asp:RadioButton ID="loginAFradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginAFradioButton_CheckedChanged" Text="Area Franchisee" AutoPostBack="True" TabIndex="4" />
<br />
<br />
<br />
                            
<asp:Button ID="loginSubmitButton" runat="server" Font-Bold="True" OnClick="loginSubmitButton_Click" Text="Log In" TabIndex="5" />
               
<asp:Button ID="loginCancelButton" runat="server" Font-Bold="True" OnClick="loginCancelButton_Click" Text="Cancel" TabIndex="6" />
<br />
<br />
  
<asp:Label ID="loginStatusInstructionLabel" runat="server" Text="Status/Instruction:"></asp:Label>
<br />
  
<asp:TextBox ID="loginStatusInstructionTextBox" runat="server" Height="230px" MaxLength="100" Rows="12" TextMode="MultiLine" Width="360px" EnableViewState="False" OnTextChanged="loginStatusInstructionTextBox_TextChanged" ReadOnly="True" TabIndex="-1"></asp:TextBox>
</div>
</form>
</body>
</html>
Login.aspx.cs:
using System;
using System.DirectoryServices;
public partial class Login : System.Web.UI.Page
private string uName; // user-entered username
private string pWord; // user-entered password
private int loginLoadCycles; // just keeping track of how many times Page_Load is called
protected void Page_Load(object sender, EventArgs e)
if (this.loginUserNameTextBox.Text == String.Empty &&
this.loginPasswordTextBox.Text == String.Empty &&
this.loginUAradioButton.Checked == false &&
this.loginAFradioButton.Checked == false)
this.loginInit();
this.setLoginVisibilityAndFocus();
this.loginLoadCycles += 1;
private void loginInit()
this.uName = String.Empty;
this.pWord = String.Empty;
this.loginLoadCycles = 0;
private void setLoginVisibilityAndFocus()
// Decide on whether or not the Login submit & cancel buttons should be enabled or not
if ( this.loginUserNameTextBox.Text == String.Empty ||
(this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false) )
this.loginSubmitButton.Enabled = false;
this.loginCancelButton.Enabled = false;
this.loginStatusInstructionTextBox.Text = "Please specify if you are a TUPSS Associate or an Area Franchisee by checking either the 'TUPSS Associate' or 'Area Franchisee' checkbox.";
else
this.loginSubmitButton.Enabled = true;
this.loginCancelButton.Enabled = true;
if (this.loginPasswordTextBox.Text == String.Empty)
this.loginStatusInstructionTextBox.Text = "Now that you have entered your username & type, please enter your password.";
else
this.loginStatusInstructionTextBox.Text = "When you are ready, please select either the Log In button to login, or the Cancel button to abort.";
if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false)
this.SetFocus(this.loginUAradioButton);
else if (this.loginUserNameTextBox.Text == String.Empty)
this.SetFocus(this.loginUserNameTextBox);
else if (this.loginPasswordTextBox.Text == String.Empty)
this.SetFocus(this.loginPasswordTextBox);
else
this.SetFocus(this.loginSubmitButton);
protected void loginUserNameTextBox_TextChanged(object sender, EventArgs e)
protected void loginPasswordTextBox_TextChanged(object sender, EventArgs e)
// For some reason, after specifying that the password entry box's textmode to 'Password' setting,
// the UI's password textbox is emptied
this.loginStatusInstructionTextBox.Text = "NOTICE:\nThis application is still under development.\n\n" +
"This is why the password you entered is visible. Once this portion of the application is ready, it will be masked.\n\n" +
"Also, still need to figure out why when changing this to Password entry mode to mask its entered data, password is getting reset.";
protected void loginSubmitButton_Click(object sender, EventArgs e)
this.loginLoadCycles = 0;
this.uName = this.loginUserNameTextBox.Text;
this.pWord = this.loginPasswordTextBox.Text;
if (this.loginUAradioButton.Checked == true && this.loginAFradioButton.Checked == false)
this.loginLADPauthenticate('U'); // authenticate UPS Associates against UPS Corp's Active Directory
else if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == true)
this.loginLADPauthenticate('A'); // authenticate Area Franchisees against UPS Store's iNet Active Directory
else
// set colors to show that this is an error instead of a status message or instruction
this.loginStatusInstructionTextBox.Text = "ERROR: Cannot log in without specifying if you are an UPS Associate or an Area Franchisee!";
protected void loginCancelButton_Click(object sender, EventArgs e)
this.loginStatusInstructionTextBox.Text = "You have selected to cancel from logging in...";
// Still need to plan what to do when user cancels out of logging in. For now, just initialize class attributes
this.loginInit();
protected void loginUAradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginUAradioButton.Checked == true)
this.loginAFradioButton.Checked = false;
msg = "Thanks for specifying that you are a TUPSS Associate. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
protected void loginAFradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginAFradioButton.Checked == true)
this.loginUAradioButton.Checked = false;
msg = "Thanks for specifying that you are an Area Franchisee. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
private void loginLADPauthenticate(char whichActiveDirectory)
String msg = "Authenticating user '" + this.uName + "' with password '" + this.pWord + "' against ";
if (whichActiveDirectory == 'U')
msg += "UPS Corp's Active Directory...";
else if (whichActiveDirectory == 'A')
msg += "The UPS Store's Franchisee Active Directory...";
msg += "\n\nNOTICE:\nThis is still under development.\n\nAt this point, this application is supposed to do something else now but is not yet ready.";
this.loginStatusInstructionTextBox.Text = msg;
this.loginStatusInstructionTextBox.AutoPostBack = true;
// Authenticate using LDAP
protected void loginStatusInstructionTextBox_TextChanged(object sender, EventArgs e)
I confirmed that I have System.DirectoryServices.dll located in
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\v4.0_4.0.0.0__b03f5f7f11d50a3a\ folder and that I as well as System have read as well as read&execute privileges
not only to all folders in its path but also to the DLL file itself.
I would appreciate any help in trying to resolve this compilation error so that I can proceed with implementing LDAP features for this endeavor.
Thanks so much,
hguico @ The UPS Store

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

SY-PAGNO does not appear when the report is run in background

Dear all,
I have one customised program that has page number included in each page. When I run it online, it will display the page number. But, when I run it in background, the page number disappear!!
The command of WRITE: 'PAGE NUMBER:', SY-PAGNO was done under TOP-OF-PAGE.
Am I doing it correctly? Please advice. Thank you.

Dear Seshu,
This is my complete coding under TOP-OF-PAGE.
      write: /130 'VA DYNAMICS SDN BHD',
             /122 'Stock Ageing Report as at ', s_budat.
      skip 1.
      write: /270 'Page: ', SY-PAGNO.
      skip 1.
      format intensified on color col_heading .
      write: /01(292) sy-uline.
      write: /01 sy-vline, 'Part No.                  ',
                  sy-vline, 'Mat.Grp. ',
                  sy-vline, 'Description                             ',
                  sy-vline, 'GT 2 Years           ',
                  sy-vline, '1 - 2 Years          ',
                  sy-vline, '6 - 12 Months        ',
                  sy-vline, '3 - 6 Months         ',
                  sy-vline, '3 Months             ',
                  sy-vline, '7 Days               ',
                  sy-vline, 'Quantity      ',
                  sy-vline, 'Value           ',
                  sy-vline, 'Avg.Price',
                  sy-vline, 'ValA',
                  sy-vline, 'Loc. ',
              292 sy-vline.
      write: /01(292) sy-uline.
Below is my report declaration:
REPORT ZTEST_STKAGE_VAD NO STANDARD PAGE HEADING LINE-SIZE 295 LINE-COUNT 65 .
All this while, I used the same way of displaying SY-PAGNO. No problem at all. Now it give me a problem.
Regards.

Rollover Slidelet does not function when the trigger & display areas overlap

Similar Messages

Maybe you are looking for