Rollup failed

Hi,
I am trying to rollup the cube using process chain. Rollup was failed because of follwing error.
"Rollup terminated: Data target SDFRTYH, from 0000211066 to 0000211174. Request SID must be smaller than or equal to 211172"
Could you pls explain me the reason for failure?
Regards,
Kishore

Hi,
Here it goes.
as you are awre sid's are the system generated ids. and
If a request is too old (that means if it has a request-SID that is smaller than the Rollup-SID or the Compress-SID of an InfoCube), the system cannot update this request any more into this InfoCube, because the system would not be able to roll up or compress this request
Also check this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler
Hope this helps
Janardhan KUmar

Similar Messages

SUP Classification - Update Rollups Fail

Hi all,
We are configured to sync only Critical Updates, Definition Updates and Security Updates. The time zone (DST) patches are not getting synched because probably they fall under different category. Upon investigation, I found that they are classified as "Update
Rollups" so I decided to add that to list of synched classifications. Unfortunately, the syncing is keep failing since then with following error message in Wsyncmgr.log
"Failed to sync update xxxxx-xx-x-xxxxx-xx. Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcesor.DeserializeAndThrow"
I have rebuilt the SUP, reinstalled WSUS but still the same... anyone knows if there is anything wrong with adding Update Rollups classificiation and if there is a way to add DST patches in SUP?
Thanks

I have searched the forum and looked into some of them. Unfortunately, all of them what I have looked were pointing to Proxy related which is not true in my case as I am not using proxy. However, as soon as I enable "Update Rollup" in classification then
the error shows up otherwise it works without any problem.

Downstream wsus server 3.2 not rollup to upstream wsus server 6.2 !!!

Hi,
We have recently upgraded upstream server to 6.2 (server 2012) but downstream server is on 3.2 (2008R2). The synchronization works well in downstream server,downstream server gets updates from upstream server and all the clients in downstream
server gets updates as well.
Problem is downstream server status in upstream server console says " not rolled up yet", through downstream server gets all updates from upstream server. Because of this, we are not getting reports from downstream server through upstream server.
The mode of downstream server also says" autonomous" which does not make sense as we have set up downstream server as replica.
we have followed up all instruction from Microsoft to upgrade upstream server. I am getting only one error below in the downstream server software distribution log . There is no error reported in upstream server IIS log.
UTC Error Wsusservice.3 Rollupagetn.wakeupworkierthereadproc Rollup failed. Error = The request failed with HTTP status 401 :unauthorized. at microsfot.updateservices.internal.reporting.rollup.rollupagetn.wakeupworkerthreadproc()
I have checked all IIS config in both servers, Anonymous Access
for the "WSUS Administration" virtual server has been enable.
Is that a version mismatch causing a problem?

Hi Lawrence,
Thanks for reply. I have already been to you your other post and already checked kb2734608, it's installed on the downstream server. The downstream WSUS version shows up 3.2.7600.256.
Both server getting a time from NTP servers, only 40 seconds time difference on downstream server which shouldn't be a big deal, I guess.
There is only one error below in the downstream server software distribution log .
UTC Error Wsusservice.3 Rollupagetn.wakeupworkerthereadproc Rollup failed. Error = The request failed with HTTP status 401 :unauthorized. at microsfot.updateservices.internal.reporting.rollup.rollupagent.wakeupworkerthreadproc()
The only error getting in event log for upstream server for port 8530 when I check wsus health.
Because port 8530 is blocked on downstream server and only port 80 and 443 is open up. I can see in the log that it's upstream server communicating with downstream server through port 80 successfully. No problem with this.
Problem is downstream server status in upstream server console says " not rolled up yet", through downstream
server gets all updates from upstream server. Because of this, we are not getting reports from downstream server through upstream server. The mode of downstream server also says" autonomous" which does not make sense as we have set up downstream server as
replica.

Infocube- Summation/SIGMA Symbol appears

Gurus,
I dont know what has changed in the NEW version of BI infocube,however am seeing the weird summation symbol or can call SIGMA symbol appearing before my requests in
the manage of the cube.
Thanks for your help in advance.

Hello
Dont worry ,you are not the one whos invented these problem neither is these with new version ,it used to occur even in 3.x scenario.
Cause - Rollup fails and the system still thinks it is Running.
Solution Steps -
1)Identify the aggregates that have not been rolled up. On the aggregate screen look at column last rollup date.
2)Deactivate all the aggregates that do not have the current roll up date.
3)Go to table maintenance (se16) and table RSMDATASTATE
4)Input name of cube
5)Change the request i.d, request sid for which aggregates exist and request SID for aggregates compressed ( all values should be the same).
This table changes the readability flag for the data in a cube.
6)Check on the manage tab to see if request is available for reporting
7)Reactivate and refill aggregates that had to be turned off(Deactivated).
PS :- Caution
Changing the state of the data to available for reporting may cause the aggregates to be in an inconsistent state.
Please make sure that the rollup has failed and the appropriate aggregates are identified prior to changing the flag as detailed above.
Hope it Helps
Chetan
@CP..

DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail

Hi,
It could be a coincidence, but ever since installing Update rollup 4 onto DPM 2012 R2, (which was at UR3 I believe) I haven't been able to complete an Exchange express full backup or consistency check with verification using Eseutil checked. If I have the
eseutil check enabled I get the following error:
Type: Consistency check
Status: Failed
Description: Data consistency verification check failed for LOGS of Exchange Mailbox Database Mailbox Database 2011112513 on SERVER.xxx. (ID 30146 Details: The process cannot access the file because it is being used by another process (0x80070020))
Disabling the eseutil verification allows it to succeed, but I'm not happy to continue with that for too long.
I've had this running for many years and this is the first real issue with exchange, its a single stand alone exchange database.
Any ideas?
Thanks,
Andreas

Andreas,
the error is stating that something else has a handle to a file or files during the ESEUtil check. Typically this is AV. I have also seen where the Exchange limits are exceeded and that causes the issue.
Please ensure you have the DPM AV exclusions for the DPM server and I would advise the DPMRA.exe on the PS. You can also trying disabling or removing AV as a test.
DPM AV exclusions -
http://technet.microsoft.com/en-us/library/hh757911.aspx
You may also want to test using eseutil against the logs outside DPM and see if that fails with similar issue. Let us know. Thanks
Regards, A.Nadar, This posting is provided "AS IS" with no warranties, and confers no rights.

Rollup process is failing every day

Hi,
Bi statistics data is loading to info cube and this cube have Adjust process in process chain.
Adjust process is failing daily and giving following 18 messages and showing 16th point as error.
And one more thing is, even though Adjust process is failu2026.at cube level compression of aggregates and rollup of cube and aggregates is happening daily but in process chain this adjust process is failing daily.
 1. Roll up aggregates of Info Cube 0TCT_C01
 2. Rollup is running: Data target 0TCT_C01, from 0000603080 to 0000603371
 3. Editing of aggregate 100533 in main process
 4. Aggregate 100533(0TCT_C01) is rolled up to 603371
 5. Aggregate 100533 (0TCT_C01) rolled up in 4 seconds
 6. 1 aggregates are condensed
 7. Editing of aggregate 100533 in main process
 8. Aggregate 100533 is condensed to 0REQUID <= 603371 and 0CNSID <= 0
 9. Aggregation of Info Cube 100533 to request 603371
 10. Statistic data written
 11. Requirements check compelted: ok
 12. enqueue set: 100533
 13. compond index checked on table: /BIC/E100533
 14. Request statistics calculated for p-dimid 1864
 15. enqueue released: 100533
 16. *******SQL0802N Arithmetic overflow or other arithmetic exception occurred. SQLSTATE=22003 row=1***error
 17. Rollup was successful: Data target 0TCT_C01, from 0000603080 to 0000603371
 18. Rollup is finished: Data target 0TCT_C01, from 0000603080 to 0000603371
Can anybody please tell what is happening here and how we can avoid this perminently.ASAP?
Thanks and Regards,
Venkat

one of the key figure has type INT4. the figure to be uploaded into this key figure is bigger than the upper limit of the INT4 defenition. hence the overflow error
check note 992805
M.

DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

We have a DPM 2012 R2 Server with SQL Server 2012 installed locally.
We tried to install Rollup 4 for DPM 2012 R2 (KB3009516) using Windows Update
and it failed with error code 0x80070643. Now when we open the DPM Console
it is totally empty (no Protection Groups, Servers, Disks, just like a fresh install).
In the eventlog we get a lot of Errors and warnings:
Event 941 (MSDPM)
Unable to connect to the DPM database. Make sure that SQL Server is running and that it is configured correctly.
Cannot open database "DPMDB" requested by the login. The login failed.
Event 4209 (MSDPM)
The description for Event ID 4209 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM Writer encountered an internal error. Please restart the DPM Writer service, and then try the backup operation again. For additional troubleshooting information, review the application event log and the DPM Troubleshooting Guide.
Event 107 (Report Server Windows Service (MSSQLSERVER)
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event 274 (SQLISService110)
Microsoft SSIS Service:
Registry setting specifying configuration file does not exist.
Attempting to load default config file.
Then there are some Errors/warnings from SQLSERVERAGENT about failed scheduled Jobs.
I think the failed Installation changed some database Settings, so that now the DPM Console
cant access the database anymore.
I would be happy if someone can help me getting this Server working again!

Our biggest problem is, that the DPM is not working any more. So there is no chance to backup the SQL Server via DPM.
I think the main problem is that DPM have no access to the database. Every time I start the DPM Application, I get an error "verify that the DPM service is running on this computer". In the eventlog are many errors that the msdpm service was unable
to connect to DPM Database. Another "information" is that the user 'nt authority\system' failed to open the database of dpm.
We've tried to reinstall the DPM but its still the same problem. I suppose that is a corrupt database.
Tomorrow I try to restore the database and hope it will be the solution of our problem.

Patch rollup for Cisco Secure ACS 4.2 fails.

I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
Thanks

Thanks for the feedback. I attempted the patch rollup install again and it failed in the same place - on the database upgrade. I did think of one thing. Do I need to have my antivirus/protection services disabled prior to installing the rollup?
Also my versions are as follows:
Server OS - Windows Server 2003 R2
Cisco Secure ACS - 4.2.(0) Build 124
Thanks,
Richard Jaehne

Rollup process is getting failed in PC

Hi,
The Rollup job gets failed daily in PC with following error message
" Error when structuring the index of aggregate 100929 for InfoCube /BIC/FICPROB "and once i repeat the job it will get success.
I need to know the reason why it get fail, if anyone has faced the similar issue and fixed it.
Regards
Sunil

You can check the number of records in the Manage screen of the individual cubes.
RSA1 -> Cube name -> Right click -> Manage.
Here you will see the records transferred & added. We are interested in the number of added records.
The roll-up is running for 8 different cubes.
This may be resulting in a Lock of processes, as said above.
Is it possible to modify the chain with 2 roll-up processes -> four cubes in one process followed by another roll-up with the remaining cubes?
This may solve the issue.
Regards
Vishal

ORABPEL-10903 when installing AIA 2.0.1 rollup patch = build failed

Hello,
When installing on a RHEL 4.7 Linux server the AIA rollup patch 2.0.1, I got this error very often (even if the OUI said the installation is OK, the installActions logs are not OK):
[exec] [exec] compile:
[exec] [exec] [echo]
[exec] [exec] [echo] --------------------------------------------------------------
[exec] [exec] [echo] | Compiling bpel process QueryCustomerPartyListPortalProvABCSImpl, revision 1.0
[exec] [exec] [echo] --------------------------------------------------------------
[exec] [exec] [echo]
[exec] [exec] ORABPEL-01021
[exec] [exec]
[exec] [exec] Echec de la validation BPEL.
[exec] [exec] Echec de la validation de la source BPEL. Erreurs :
[exec] [exec]
[exec] [exec] *[Erreur ORABPEL-10903] : échec de la lecture du WSDL*
[exec] [exec] [Description] : dans "bpel.xml", Echec de la lecture du document WSDL.
[exec] [exec] Echec de la lecture du document WSDL dans "http://dvedvb40:7777/orabpel/default/AIAAsyncErrorHandlingBPELProcess/AIAAsyncErrorHandlingBPELProcess?wsdl". Cause : "Echec de la lecture du WSDL dans http://dvedvb40:7777/orabpel/default/AIAAsyncErrorHandlingBPELProcess/AIAAsyncErrorHandlingBPELProcess?wsdl : WSDL introuvable".
[exec] [exec] Assurez-vous que le document WSDL est valide. Vous devrez peut-être démarrer le serveur OraBPEL ou vérifier que le processus BPEL associé est correctement déployé.
[exec] [exec] .
[exec] [exec] [Solution potentielle] : Si votre site utilise un serveur proxy, vous pouvez configurer le serveur BPEL, BPEL Designer et votre navigateur Web avec les paramètres de configuration de ce serveur proxy (pour obtenir des instructions, reportez-vous à la note technique sur le site http://otn.oracle.com/bpel).
[exec] [exec] .
[exec] [exec]
[exec] [exec]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1133)
[exec] [exec]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[exec] [exec]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[exec] [exec]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[exec] [exec]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[exec] [exec]      at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
[exec] [exec]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[exec] [exec]      at java.lang.reflect.Method.invoke(Method.java:585)
[exec] [exec]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[exec] [exec]      at org.apache.tools.ant.Task.perform(Task.java:348)
[exec] [exec]      at org.apache.tools.ant.Target.execute(Target.java:357)
[exec] [exec]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[exec] [exec]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[exec] [exec]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
[exec] [exec]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[exec] [exec]
[exec] [exec] BUILD FAILED
When I copy/past those 2 URL into my browser:
http://dvedvb40:7777/orabpel/default/AIAAsyncErrorHandlingBPELProcess/AIAAsyncErrorHandlingBPELProcess?wsdl
http://dvedvb40:7777/orabpel/default/AIAAsyncErrorHandlingBPELProcess/1.0
they are perfectly found, though!
At the end of the install process, OUI says the installation was fine, but it's not what the installActions log says...
What do you think of that?
Thanks in advance.
Regards,
KaRiNe.
Edited by: user10975061 on 28 mai 2009 05:42

Hello,
We did go further into the installation process, but we still got this same old error at the end (after more than 6 hours!!!)... :((
Checking the processes status at the end of this installation, we can see the oc4j_soa server and HTTP server are Stop and Down which is not good:
dvedvb40:oracle:/exec/applis/tbaia/products/oracle/10.1.3.1/OracleAS/opmn/bin> ./opmnctl status
Processes in Instance: AIADB.dvedvb40
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
ASG | ASG | N/A | Down
OC4JGroup:default_group | OC4J:oc4j_soa | 6746 | Stop
OC4JGroup:default_group | OC4J:home | 6745 | Alive
HTTP_Server | HTTP_Server | N/A | Down
Regards,
KaRiNe.

Rollup process failing in process chain

Hi All,
Daily the rollup processin in our process chain failing due to the fallowing error
"ORA-01400: cannot insert NULL into
("SAPBIW"."/BIC/E100093"."KEY_100093U") "
But once we repeat the rollup process in the process chain it is getting successfull.
Can you suggest solution for this error.
Thanks
Suneel

Hi Suneel,
As correctly mentioned by other to check logs and PSA data, you shour also check notes available on this error.
Probabaly some data in a field is causing this error, so need to analyize the values which are coming.
There are few notes on this:
ORA-1406 error/ ORA-1400 Cannot insert NULL
SAP Note Number: 211617
Hope it helps...
Regards,
Ashish

Patch failed ( ATG rollup 5)

hai,
i am applying rollup 5 patch. after some time i got error
FAILED: file jtfpfrepgrants.sql on worker 1 for product jtf username JTF.
Deferred: file jtfpfrepgrants.sql on worker 1 for product jtf username JTF. (Deferment number 2 for this job)
Assigned: file jtfpfrepgrants.sql on worker 1 for product jtf username JTF.Spawned Process 29339
FAILED: file jtfpfrepgrants.sql on worker 1 for product jtf username JTF.
ATTENTION: All workers either have failed or are waiting:
FAILED: file jtfpfrepgrants.sql on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
i followd everthinh pre requists regarding this patch.
so what we will do regarding this issue.
regards
dba

Again, you need to check the adworker log file :)
You may also review the following notes:
Note: 429498.1 - Patch 5473858 11i.ATG_PF.H.delta.5 Fails on ademusr.sql - ORA-01031: insufficient privileges
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=429498.1
Note: 431067.1 - Patch 5473858 Failed On File ademusr.sql
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=431067.1

About Oracle HRMS Family Pack K Rollup 5 (RUP5) - Global Worker Failed On H

Hi People
Im busy appyling the Oracle HRMS Family Pack K Rollup 5 and its failing with Worker Failed On Hxcmprn.Sql
I've loggeg an SR with oracle, can some one please help me ASAP. I have applied all the prereq patches
as per suggested metalink notes
Thanks
SIbusiso
Edited by: Sibusiso on Apr 29, 2010 2:57 AM

Hi
Current system time is Thu Apr 29 11:03:21 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 11:03:21 2010
Current system time is Thu Apr 29 11:03:22 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 11:03:23 2010
Current system time is Thu Apr 29 11:03:23 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 11:03:24 2010
Current system time is Thu Apr 29 11:04:41 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 11:04:41 2010
Current system time is Thu Apr 29 12:20:38 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 12:20:39 2010
Current system time is Thu Apr 29 12:20:40 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 12:20:41 2010
Current system time is Thu Apr 29 12:20:41 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 12:20:41 2010
Current system time is Thu Apr 29 12:44:45 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 12:44:46 2010
Current system time is Thu Apr 29 14:07:57 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 14:07:58 2010
Current system time is Thu Apr 29 14:15:46 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 14:15:47 2010
Current system time is Thu Apr 29 14:18:50 2010
Uploading from the data file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11), /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt) to staging tables
Dumping LCT file /tujias/applmgr/1159/hxc/11.5.0/patch/115/import/hxctmcatimcatgry.lct(115.11) into FND_SEED_STAGE_CONFIG
Dumping LDT file /tujias/applmgr/1159/pa/11.5.0/patch/115/import/US/pazzhxctmca0007.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (HXC_TIME_CATEGORIES Projects Processing Fields , HXC_TIME_CATEGORY_COMPS Projects Processing Fields ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for HXC_TIME_CATEGORY_COMPS: TIME_CATEGORY_NAME = Projects Processing Fields, TC_NAME = Projects Processing Fields, ORA-20001: HR_6153_ALL_PROCEDURE_FAIL: N, PROCEDURE, hxc_time_categories LCT, N, STEP, Need to revisit tc comp exists test
Concurrent request completed
Current system time is Thu Apr 29 14:18:50 2010

Exchange 2010 sp3 rollup 7 fails

Exchange 2010 sp3 rollup 7 fails. This is ran at an elevated prompt and the UAC off. This server is also logged in as the domain Administrator account.
The server currently has rollup 4 SP3 installed. I'm wondering if I should uninstall it, reboot then try the Rollup 7 SP3 update?

Hi,
Can you please post the error?
At the same time please check these.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

SCOM 2012 SP1 : Update rollup installation failed

Hello,
I'm trying to update SCOM 2012 SP1 with UR7 but the installation rollback automatically.
Same error with others UR.
LOG MSP :
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server - Update 'System Center 2012 - Operations Manager SP1 UR7 Update Patch' could not be installed. Error code 1603. Additional information is available in the log file c:\logs3.log.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer installed an update. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: System Center 2012 - Operations
Manager SP1 UR7 Update Patch. Installation success or error status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Note: 1: 1729
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server -- Configuration failed.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer reconfigured the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: Unable to delete the file. LastError = 32
MSI (c) (08:1C) [14:49:24:772]: Grabbed execution mutex.
MSI (c) (08:1C) [14:49:24:772]: Cleaning up uninstalled install packages, if any exist
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: MainEngineThread is returning 1603
=== Verbose logging stopped: 15/10/2014 14:49:24 ===
MOMPerfCtrsInstall.log
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The uninstall has completed.
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.InstallLog.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The uninstall has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Maybe someone have a idea about that ?
Thank you !
Jérémy

Hi,
Have your tried to review the c:\logs3.log for any potential error or indication of cause?
For more information, please review the link below:
Update Rollup 7 for System Center 2012 Operations Manager Service Pack 1
http://support.microsoft.com/kb/2965420
Update rollup packages for System Center 2012 Operations Manager
http://support.microsoft.com/kb/2906925
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Rollup failed

Similar Messages

Maybe you are looking for