Rollup setup

Hi all,
I'm FI-SL consultant but I never used Rollup until now. Thus, I would like to create it because I need only some amounts summarized, but I don't understand why I have to create a Reset set or Rollup set ?
I just want a standard Rollup which summarizes 2 fields per account and company code.
Why do I have to create those sets ? I don't want to limit by any value. I just want to summarize all data by account and use it in Report Painter ?
Regards,
Gilles.

Thank's Kyoko.
But I just would like to reduce the whole sources data to only 2 fields (account and amount). Thus, I don't understand why I have to use "set" for reset or for anything else. I don't want to reduce all values.
To explain, if I have in source data 2 lines with 20 fields, I only need 2 of them. So I just want in target ledger 2 lines with 2 fields (Account and amount )
But, I guess I creating a simply new ledger with only 2 fields for the new ledger and I will post on 2 ledgers.
Best regards,
Gilles.

Similar Messages

  • Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

    Dear forum,
    I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
    After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
    I let it alone for more than an hour but nothing happens.
    Launching it with /log returns this line at the end:
         "InstallFiles: File: Copying new files,  Directory: ,  Size: "
    Do you have already meet this issue or do you have any idea about the cause?
    Thanks for your help.

    Hi Amy,
    You'll find below the errors found in the rollup setup log:
    DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
    1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
    DEBUG: Error 2726:  Action not found: PreNgenEndDlg
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
    Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
    Just tell me if you need the whole log.
    Thanks

  • Exchange Rollup 7 SP3 Setup Prematurely Ended

    Hello Everyone,
    I am trying to install exchange rollup 7 sp3 on our Exchange 2010 server. It is currently setup on Windows Server 2008 R2 Enterprise edition x64. I Couldnt post the fill windowsupdate log file so just pasted anything that looks important.
    When installing from windows update i receive an the following error code 80070643
    I ran the windowsupdate.log file through a 3rd party tool and here is what it gave me:
    1
    2014-12-15 19:08:25
    AGENT
    WARNING: failed to access the auth cab, fatal error 0x80070003
    2
    2014-12-15 19:08:25
    AGENT
    WARNING: Invalid service in the backup data store; cleaning up
    3
    2014-12-15 19:08:25
    AGENT
    WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
    4
    2014-12-15 19:08:25
    AGENT
    WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
    5
    2014-12-15 19:10:35
    AGENT
    * WARNING: Online service registration/service ID resolution failed, hr=0x8024A005
    6
    2014-12-15 19:10:35
    AGENT
    * WARNING: Exit code = 0x8024A005
    7
    2014-12-15 19:10:35
    AGENT
    WARNING: WU client failed Searching for update with error 0x8024a005
    8
    2014-12-15 19:10:35
    AU
    # WARNING: Search callback failed, result = 0x8024A005
    9
    2014-12-15 19:10:35
    AU
    # WARNING: Failed to find updates with error code 8024A005
    10
    2014-12-15 19:10:38
    PT
    WARNING: Cached cookie has expired or new PID is available
    11
    2014-12-15 19:15:24
    DTASTOR
    WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/06/4418367_58b6396367cff62f838d6ac831f1ce2e9985ae81.cab for file WLY5Y2fP9i+DjWrIMfHOLpmFroE= when file
    has not been previously added to the datastore
    12
    2014-12-15 19:15:24
    DTASTOR
    WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/updt/2011/04/windows6.1-kb982018-v3-x64_7853a1c9c63611e17cd2c923704bf2e924bdfe7b.msu for file eFOhycY2EeF80skjcEvy6SS9/ns=
    when file has not been previously added to the datastore
    tastore
    454
    2014-12-15 19:15:28
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    459
    2014-12-15 19:18:51
    AGENT
    WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point
    460
    2014-12-15 19:18:51
    AGENT
    WARNING: LoadLibrary failed for srclient.dll with hr:8007007e
    461
    2014-12-15 19:21:58
    HANDLER
    : WARNING: First failure for update {8A89B318-0B37-4630-A38B-216EBC10F7B7}, transaction error = 0x8024200b, MSI
    result = 0x80070643, MSI action = CA_SAVEDATA_STOP_SERVICES
    462
    2014-12-15 19:21:58
    AU
    # WARNING: Install failed, error = 0x80070643 / 0x80070643
    463
    2014-12-15 19:21:58
    HANDLER
    : WARNING: Operation failed at update 0, Exit code = 0x8024200B
    464
    2014-12-15 19:21:58
    AU
    # WARNING: Install call completed, reboot required = No, error = 0x00000000
    465
    2014-12-15 19:21:58
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    466
    2014-12-15 20:31:08
    AU
    WARNING: ApproveUpdatesInternal failed with hr:8024000c
    467
    2014-12-15 20:31:08
    WUAPP
    WARNING: IAutoUpdateClient::ApproveUpdates failed with hr:8024000c
    468
    2014-12-15 20:31:08
    WUAPP
    FATAL: ElevatedApproveUpdates failed for 1 updates, hr=8024000C
    469
    2014-12-15 20:31:08
    WUAPP
    FATAL: Failed to begin install for 1 updates, error code 8024000C
    470
    2014-12-15 20:32:10
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    471
    2014-12-15 20:32:15
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    472
    2014-12-15 20:32:20
    AU
    WARNING: Returning due to error from GetDownloadProgressUx, error = 0x8024000C
    473
    2014-12-15 20:32:20
    AU
    WARNING: GetInteractiveInstallProgress failed, error = 0x8024000C
    474
    2014-12-15 20:32:20
    WUAPP
    WARNING: Call to GetInteractiveInstallProgress failed, hr=8024000C
    475
    2014-12-15 20:32:26
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    476
    2014-12-15 20:32:28
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    477
    2014-12-15 20:32:28
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    478
    2014-12-15 20:32:28
    AGENT
    WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point
    479
    2014-12-15 20:32:28
    AGENT
    WARNING: LoadLibrary failed for srclient.dll with hr:8007007e
    480
    2014-12-15 20:37:18
    HANDLER
    : WARNING: First failure for update {8A89B318-0B37-4630-A38B-216EBC10F7B7}, transaction error = 0x8024200b, MSI
    result = 0x80070643, MSI action = CA_SAVEDATA_STOP_SERVICES
    481
    2014-12-15 20:37:18
    AU
    # WARNING: Install failed, error = 0x80070643 / 0x80070643
    482
    2014-12-15 20:37:18
    HANDLER
    : WARNING: Operation failed at update 0, Exit code = 0x8024200B
    483
    2014-12-15 20:37:18
    AU
    # WARNING: Install call completed, reboot required = No, error = 0x00000000
    484
    2014-12-15 20:37:18
    WUAPP
    WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
    485
    2014-12-15 21:49:50
    COMAPI
    WARNING: Received service shutdown/self-update notification.
    486
    2014-12-15 23:01:33
    COMAPI
    WARNING: Received service shutdown/self-update notification.
    507
    2014-12-16 15:06:42
    COMAPI
    WARNING: Received service shutdown/self-update notification.
    I then downloaded the update rollup 7 for exchange server 2010 sp3 msi file and ran it in verbose mode . I downloaded the winodws sdk and used wilogutl.exe to examine the log files.  It gave me 6 different errors
    Errors Found For Log File C:\cailogs\exchangerollup7sp3.log
    ======================================================
    6 Non-Ignored Errors
    ======================================================
    Believed Error Found:
    MSI (s) (B8!E0) [21:14:00:878]: Creating MSIHANDLE (22) of type 790531 for thread 6624
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    MSI (s) (B8!E0) [21:14:00:878]: Closing MSIHANDLE (22) of type 790531 for thread 6624
    CustomAction CA_SAVEDATA_STOP_SERVICES returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (B8:A4) [21:14:00:878]: Closing MSIHANDLE (20) of type 790536 for thread 6940
    Action ended 21:14:00: InstallExecute. Return value 3.
    Proposed Solution To Error:
      A standard action or custom action caused the failure.
    Believed Error Found:
    MSI (s) (B8:1C) [21:14:02:112]: Transforming table InstallExecuteSequence.
    MSI (s) (B8:1C) [21:14:02:112]: Transforming table InstallExecuteSequence.
    MSI (s) (B8:1C) [21:14:02:112]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038 
    Action ended 21:14:02: INSTALL. Return value 3.
    Summary for log file C:\cailogs\exchangerollup7sp3.log
    ======================================================
    MSI Version : 5.0.7601
    Date & Time : 
    Command Line: 
    User        : (none)
    Admin Rights: Yes
    Client Priviledge Details: MSI (c) (38:40) [21:09:39:329]: Running product '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}' with elevated privileges: Product is assigned.
    Server Priviledge Details: MSI (s) (B8:1C) [21:13:57:613]: Product {4934D1EA-BE46-48B1-8847-F1AF20E892C1} is managed.
    MSI (s) (B8:1C) [21:13:57:613]: Running product '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}' with elevated privileges: Product is assigned.
    ======================================================
    Believed Error Found:
    MSI (s) (B8!E0) [21:14:00:878]: Creating MSIHANDLE (22) of type 790531 for thread 6624
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    MSI (s) (B8!E0) [21:14:00:878]: Closing MSIHANDLE (22) of type 790531 for thread 6624
    CustomAction CA_SAVEDATA_STOP_SERVICES returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (B8:A4) [21:14:00:878]: Closing MSIHANDLE (20) of type 790536 for thread 6940
    Action ended 21:14:00: InstallExecute. Return value 3.
    Proposed Solution To Error:
      A standard action or custom action caused the failure.
    Proposed Solution To Error:
      A standard action or custom action caused the failure.
    Believed Error Found:
    MSI (s) (B8:D8) [21:14:02:191]: Destroying RemoteAPI object.
    MSI (s) (B8:8C) [21:14:02:191]: Custom Action Manager thread ending.
    MSI (c) (38:40) [21:14:02:206]: Back from server. Return value: 1603
    MSI (c) (38:40) [21:14:02:206]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (38:40) [21:14:02:206]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.
    Action ended 21:14:02: ExecuteAction. Return value 3.
    Proposed Solution To Error:
      A standard action or custom action caused the failure.
    Believed Error Found:
    MSI (c) (38:58) [21:14:02:237]: Note: 1: 2262 2: Error 3: -2147287038 
    DEBUG: Error 2826:  Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
    Action 21:14:02: FatalError. Dialog created
    Action ended 21:33:53: FatalError. Return value 2.
    Proposed Solution To Error:
      User canceled action.
    Believed Error Found:
    MSI (c) (38:58) [21:14:02:237]: Note: 1: 2262 2: Error 3: -2147287038 
    DEBUG: Error 2826:  Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
    Action 21:14:02: FatalError. Dialog created
    Action ended 21:33:53: FatalError. Return value 2.
    Action ended 21:33:53: INSTALL. Return value 3.
    Proposed Solution To Error:
      A standard action or custom action caused the failure.
    Believed Error Found:
    MSI (c) (38:40) [21:33:53:195]: Windows Installer reconfigured the product. Product Name: Microsoft Exchange Server. Product Version: 14.3.123.4. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603.
    MSI (c) (38:40) [21:33:53:211]: Grabbed execution mutex.
    MSI (c) (38:40) [21:33:53:211]: Cleaning up uninstalled install packages, if any exist
    MSI (c) (38:40) [21:33:53:226]: MainEngineThread is returning 1603
    Proposed Solution To Error:
      Fatal error during installation.
    0 Ignored Errors
    ======================================================
    Believed Error Found:
    No Error Found!
    Proposed Solution To Error:
      No Solution Needed!
    Policies Set For Log File C:\cailogs\exchangerollup7sp3.log
    ======================================================
    Machine Policies
    ======================================================
    AllowLockDownBrowse      : ?
    AllowLockdownMedia       : ?
    AllowLockdownPatch       : 0
    AlwaysInstallElevated    : 0
    Debug                    : 0
    DisableBrowse            : ?
    DisableMSI               : 1
    DisablePatch             : 0
    DisableRollback          : 0
    DisableUserInstalls      : 0
    EnableAdminTSRemote      : ?
    EnableUserControl        : ?
    LimitSystemRestoreCheckpointing: 0
    Logging                  : ?
    SafeForScripting         : ?
    TransformsSecure         : ?
    DisableLUAPatching       : 0
    DisablePatchUninstall    : ?
    DisableFlyWeightPatching : 0
    EnforceUpgradeComponentRules: 0
    MaxPatchCacheSize        : 10
    User Policies
    ======================================================
    AlwaysInstallElevated    : 0
    DisableMedia             : ?
    DisableRollback          : 0
    SearchOrder              : ?
    TransformsAtSource       : ?
    I do not have network policy server setup.
    I have disabled certificate revocation list from internet options
    I have added all the windows update sites to the trusted domains list
    I have spent over 10 hours trying to figure out what is going on here. Could someone please help me? I thank you in advanced and all input is accepted.

    Hi Scott,
    Please verify whether you have installed KB2506143:
    https://support.microsoft.com/kb/2506143 .
    If it is the case, please try to uninstall this KB.
    Thanks
    Mavis Huang
    TechNet Community Support

  • List of Manual Setup required for iSetup to work

    Hi All,
    This is Mugunthan from iSetup development. Based on my interaction with customers and Oracle functional experts, I had documented list of manual setups that are required for smooth loading of selection sets. I am sharing the same. Please let me know if I anyone had to enter some manual setup while using iSetup.
    Understanding iSetup
    iSetup is a tool to migrate and report on your configuration data. Various engineering teams from Oracle develop the APIs/Programs, which migrates the data across EBS instances. Hence all your data is validated for all business cases and data consistency is guarantied. It requires good amount of setup functional knowledge and bit of technical knowledge to use this tool.
    Prerequisite setup for Instance Mapping to work
    ·     ATG patch set level should be same across all EBS instances.
    ·     Copy DBC files of each other EBS instances participating in migration under $FND_SECURE directory (refer note below for details).
    ·     Edit sqlnet.ora to allow connection between DB instacnes(tcp.invited_nodes=(<source>,<central>))
    ·     Make sure that same user name with iSetup responsibility exists in all EBS instances participating in migration.
    Note:- iSetup tool is capable of connecting to multiple EBS instances. To do so, it uses dbc file information available under $FND_SECURE directory. Let us consider three instances A, B & C, where A is central instance, B is source instance and C is target instances. After copying the dbc file on all nodes, $FND_SECURE directory would look like this on each machine.
    A => A.dbc, B.dbc, C.dbc
    B => A.dbc, B.dbc
    C => A.dbc, C.dbc
    Prerequisite for registering Interface and creating Custom Selection Set
    iSetup super role is mandatory to register and create custom selection set. It is not sufficient if you register API on central/source instance alone. You must register the API on all instances participating in migration/reporting.
    Understanding how to access/share extracts across instances
    Sharing iSetup artifacts
    ·     Only the exact same user can access extracts, transforms, or reports across different instances.
    ·     The “Download” capability offers a way to share extracts, transforms, and loads.
    Implications for Extract/Load Management
    ·     Option 1: Same owner across all instances
    ·     Option 2: Same owner in Dev, Test, UAT, etc – but not Production
    o     Extract/Load operations in non-Production instances
    o     Once thoroughly tested and ready to load into Production, download to desktop and upload into Production
    ·     Option 3: Download and upload into each instance
    Security Considerations
    ·     iSetup does not use SSH to connect between instances. It uses Concurrent Manager framework to lunch concurrent programs on source and target instances.
    ·     iSetup does not write password to any files or tables.
    ·     It uses JDBC connectivity obtained through standard AOL security layer
    Common Incorrect Setups
    ·     Failure to complete/verify all of the steps in “Mapping instances”
    ·     DBC file should be copied again if EBS instance has been refreshed or autoconfig is run.
    ·     Custom interfaces should be registered in all EBS instances. Registering it on Central/Source is not sufficient.
    ·     Standard Concurrent Manager should up for picking up iSetup concurrent requests.
    ·     iSetup financial and SCM modules are supported from 12.0.4 onwards.
    ·     iSetup is not certified on RAC. However, you may still work with iSetup if you could copy the DBC file on all nodes with the same name as it had been registered through Instance Mapping screen.
    Installed Languages
    iSetup has limitations where it cannot Load or Report if the number and type of installed languages and DB Charset are different between Central, Source and Target instances. If your case is so, there is a workaround. Download the extract zip file to desktop and unzip it. Edit AZ_Prevalidator_1.xml to match your target instance language and DB Charset. Zip it back and upload to iSetup repository. Now, you would be able to load to target instance. You must ensure that this would not corrupt data in DB. This is considered as customization and any data issue coming out this modification is not supported.
    Custom Applications
    Application data is the prerequisite for the most of the Application Object Library setups such as Menus, Responsibility, and Concurrent programs. iSetup does not migrate Custom Applications as of now. So, if you have created any custom application on source instance, please manually create them on the target instance before moving Application Object Library (AOL) data.
    General Foundation Selection Set
    Setup objects in General foundation selection set supports filtering i.e. ability to extract specific setups. Since most of the AOL setup data such as Menus, Responsibilities and Request Groups are shipped by Oracle itself, it does not make sense to migrate all of them to target instance since they would be available on target instance. Hence, it is strongly recommended to extract only those setup objects, which are edited/added, by you to target instance. This improves the performance. iSetup uses FNDLOAD (seed data loader) to migrate most of the AOL Setups. The default behavior of FNDLOAD is given below.
    Case 1 – Shipped by Oracle (Seed Data)
    FNDLOAD checks last_update_date and last_updated_by columns to update a record. If it is shipped by Oracle, the default owner of the record would be Oracle and it would skip these records, which are identical. So, it won’t change last_update_by or last_updated_date columns.
    Case 2 – Shipped by Oracle and customized by you
    If a record were customized in source instance, then it would update the record based on last_update_date column. If the last_update_date in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
    Case 3 – Created and maintained by customers
    If a record were newly added/edited in source instance by you, then it would update the record based on last_update_date column. If the last_update_date of the record in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
    Profiles
    HR: Business Group => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
    HR: Security Profile => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
    MO: Operating Unit => Set the Operating Unit name for which you would like to extract data from source instance. After loading Operating Unit onto the target instance, make sure that this profile option is set if required.
    Navigation path to do the above setup:
    System Administrator -> Profile -> System.
    Query for the above profiles and set the values accordingly.
    Descriptive & Key Flex Fields
    You must compile and freeze the flex field values before extracting using iSetup.
    Otherwise, it would result in partial migration of data. Please verify that all the data been extracted by reporting on your extract before loading to ensure data consistency.
    You can load the KFF/DFF data to target instance even the structures in both source as well as target instances are different only in the below cases.
    Case 1:
    Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
    Target=> Loc1, Loc2, Loc3 (Mandate), Loc4, Loc5 and Loc6
    If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3, Loc4, then locations will be loaded to target instance without any issue. If you do not provide value for Loc3, then API will fail, as Loc3 is a mandatory field.
    Case 2:
    Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
    Target=> Loc1 (Mandate), Loc2
    If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3 and Loc4 and load data to target instance, API will fail as Loc3 and Loc4 are not there in target instance.
    It is always recommended that KFF/DFF structure should be same for both source as well as target instances.
    Concurrent Programs and Request Groups
    Concurrent program API migrates the program definition(Definition + Parameters + Executable) only. It does not migrate physical executable files under APPL_TOP. Please use custom solution to migrate executable files. Load Concurrent Programs prior to loading Request Groups. Otherwise, associated concurrent program meta-data will not be moved even through the Request Group extract contains associated Concurrent Program definition.
    Locations - Geographies
    If you have any custom Geographies, iSetup does not have any API to migrate this setup. Enter them manually before loading Locations API.
    Currencies Types
    iSetup does not have API to migrate Currency types. Enter them manually on target instance after loading Currency API.
    GL Fiscal Super user--> setup--> Currencies --> rates -- > types
    Associating an Employee details to an User
    The extract process does not capture employee details associated with users. So, after loading the employee data successfully on the target instance, you have to configure them again on target instance.
    Accounting Setup
    Make sure that all Accounting Setups that you wish to migrate are in status “Complete”. In progress or not-completed Accounting Setups would not be migrated successfully.
    Note: Currently iSetup does not migrate Sub-Ledger Accounting methods (SLA). Oracle supports some default SLA methods such as Standard Accrual and Standard Cash. You may make use of these two. If you want to use your own SLA method then you need to manually create it on target instances because iSetup does not have API to migrate SLA. If a Primary Ledger associated with Secondary Ledgers using different Chart of Accounts, then mapping rules should be defined in the target instance manually. Mapping rule name should match with XML tag “SlCoaMappingName”. After that you would be able to load Accounting Setup to target instance.
    Organization API - Product Foundation Selection Set
    All Organizations which are defined in HR module will be extracted by this API. This API will not extract Inventory Organization, Business Group. To migrate Inventory Organization, you have to use Inventory Organization API under Discrete Mfg. and Distribution Selection Set. To extract Business Group, you should use Business Group API.
    Inventory Organization API - Discrete Mfg & Distribution Selection Set
    Inventory Organization API will extract Inventory Organization information only. You should use Inventory Parameters API to move parameters such as Accounting Information. Inventory Organization API Supports Update which means that you can update existing header level attributes of Inventory Organization on the target instance. Inventory Parameters API does not support update. To update Inventory Parameters, use Inventory Parameters Update API.
    We have a known issue where Inventory Organization API migrates non process enabled organization only. If your inventory organization is process enabled, then you can migrate them by a simple workaround. Download the extract zip file to desktop and unzip it. Navigate to Organization XML and edit the XML tag <ProcessEnabledFlag>Y</ProcessEnabledFlag> to <ProcessEnabledFlag>N</ProcessEnabledFlag>. Zip it back the extract and upload to target instance. You can load the extract now. After successful completion of load, you can manually enable the flag through Form UI. We are working on this issue and update you once patch is released to metalink.
    Freight Carriers API - Product Foundation Selection Set
    Freight Carriers API in Product Foundation selection set requires Inventory Organization and Organization Parameters as prerequisite setup. These two APIs are available under Discrete Mfg. and Distribution Selection Set. Also,Freight Carriers API is available under Discrete Mfg and Distribution Selection Set with name Carriers, Methods, Carrier-ModeServ,Carrier-Org. So, use Discrete Mfg selection set to load Freight Carriers. In next rollup release Freight Carriers API would be removed from Product Foundation Selection Set.
    Organization Structure Selection Set
    It is highly recommended to set filter and extract and load data related to one Business Group at a time. For example, setup objects such as Locations, Legal Entities,Operating Units,Organizations and Organization Structure Versions support filter by Business Group. So, set the filter for a specific Business Group and then extract and load the data to target instance.
    List of mandatory iSetup Fwk patches*
    8352532:R12.AZ.A - 1OFF:12.0.6: Ignore invalid Java identifier or Unicode identifier characters from the extracted data
    8424285:R12.AZ.A - 1OFF:12.0.6:Framework Support to validate records from details to master during load
    7608712:R12.AZ.A - 1OFF:12.0.4:ISETUP DOES NOT MIGRATE SYSTEM PROFILE VALUES
    List of mandatory API/functional patches*
    8441573:R12.FND.A - 1OFF:12.0.4: FNDLOAD DOWNLOAD COMMAND IS INSERTING EXTRA SPACE AFTER A NEWLINE CHARACTER
    7413966:R12.PER.A - MIGRATION ISSUES
    8445446:R12.GL.A - Consolidated Patch for iSetup Fixes
    7502698:R12.GL.A - Not able to Load Accounting Setup API Data to target instance.
    Appendix_
    How to read logs
    ·     Logs are very important to diagnose and troubleshoot iSetup issues. Logs contain both functional and technical errors.
    ·     To find the log, navigate to View Detail screens of Extracts/ Transforms/Loads/Standard/Comparison Reports and click on View Log button to view the log.
    ·     Generic Loader (FNDLOAD or Seed data loader) logs are not printed as a part of main log. To view actual log, you have to take the request_id specified in the concurrent log and search for the same in Forms Request Search Window in the instance where the request was launched.
    ·     Functional errors are mainly due to
    o     Missing prerequisite data – You did not load one more perquisite API before loading the current API. Example, trying to load “Accounting Setup” without loading “Chart of Accounts” would result in this kind of error.
    o     Business validation failure – Setup is incorrect as per business rule. Example, Start data cannot be greater than end date.
    o     API does not support Update Records – If the there is a matching record in the target instance and If the API does not support update, then you would get this kind of errors.
    o     You unselected Update Records while launching load - If the there is a matching record in the target instance and If you do not select Update Records, then you would get this kind of errors.
    Example – business validation failure
    o     VONAME = Branches PLSQL; KEY = BANKNAME = 'AIBC‘
    o     BRANCHNAME = 'AIBC'
    o     EXCEPTION = Please provide a unique combination of bank number, bank branch number, and country combination. The 020, 26042, KA combination already exists.
    Example – business validation failure
    o     Tokens: VONAME = Banks PLSQL
    o     BANKNAME = 'OLD_ROYAL BANK OF MY INDIA'
    o     EXCEPTION = End date cannot be earlier than the start date
    Example – missing prerequisite data.
    o     VONAME = Operating Unit; KEY = Name = 'CAN OU'
    o     Group Name = 'Setup Business Group'
    o     ; EXCEPTION = Message not found. Application: PER, Message Name: HR_ORG_SOB_NOT_FOUND (Set of books not found for ‘Setup Business Group’)
    Example – technical or fwk error
    o     OAException: System Error: Procedure at Step 40
    o     Cause: The procedure has created an error at Step 40.
    o     Action: Contact your system administrator quoting the procedure and Step 40.
    Example – technical or fwk error
    o     Number of installed languages on source and target does not match.
    Edited by: Mugunthan on Apr 24, 2009 2:45 PM
    Edited by: Mugunthan on Apr 29, 2009 10:31 AM
    Edited by: Mugunthan on Apr 30, 2009 10:15 AM
    Edited by: Mugunthan on Apr 30, 2009 1:22 PM
    Edited by: Mugunthan on Apr 30, 2009 1:28 PM
    Edited by: Mugunthan on May 13, 2009 1:01 PM

    Mugunthan
    Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
    One of them is
    ===========>>>
    Uploading snapshot to central instance failed, with 3 different messages
    Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
         at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
    please assist.
    regards
    girish

  • Can I use multiple values for a rollup key on the same Endeca record?

    We have a business need to to aggregate our records using different criteria, based on user navigation. We are thinking of using a rollup key with multiple values to help with the aggregation, but we are running into some issues.
    Here is a made-up xample of what we want to do: assume we have a group of products and these products can be organized into groups using parent-child relationships. We would like to create an aggregate record for each parent, and we want the aggregate record for each parent to include all the children for the parent. To achieve this, we use a field called "parent_rec_spec" that holds the parent record spec and we set the same value on the field for the parent and its children. When we do rollup using the parent_rec_spec as the rollup key, we are able to see one aggregate record for each parent (with its children).
    The previous setup worked perfectly for us so far. But now we are getting a business requirement that allows children nodes to be linked to multiple parents at the same time. We were hoping of using another dimension to limit the records based on user roles/characteristics , so that only applicable parents/children are displayed (for example, we can use "market" as an additional filtering property, and we decide to show all parents/children for "North America", while hiding the parents/children for other markets).
    This caused an odd behavior when children are linked to multiple parents. For example, assume that SKUs A and B were linked to parents in "North America" and "Europe" at the same time, and assume that the user chose the "North America" market. The navigation state would eliminate the parents/children that are no in North America, and will also cause the parents/children that are labeled for North America to show up and be aggregated correctly. This however will lead to the creation of additional aggregate records for the A and B using the parent_rec_spec values that would have linked them to the Europe parents (even though the parents are hidden away).
    Here is an example index file that we used to load the test data:
    Update||1
    Market||North America
    Record Type||Product
    Name||Parent 1
    rec_spec||P1
    parent_rec_spec||P1
    EOR
    Update||1
    Market||Europe
    Record Type||Product
    Name||Parent 2
    rec_spec||P2
    parent_rec_spec||P2
    EOR
    Update||1
    Market||North America
    Record Type||Product
    Name||Child A
    rec_spec||A
    parent_rec_spec||P1
    EOR
    Update||1
    Market||North America
    Market||Europe
    Record Type||Product
    Name||Child B
    rec_spec||B
    parent_rec_spec||P1
    parent_rec_spec||P2
    EOR
    Update||1
    Market||North America
    Market||Europe
    Record Type||Product
    Name||Child C
    rec_spec||C
    parent_rec_spec||P1
    parent_rec_spec||P2
    EOR
    Update||1
    Market||Europe
    Record Type||Product
    Name||Child D
    rec_spec||D
    parent_rec_spec||P2
    EOR
    In this setup, we have parent P1 marked for North America with children A, B and C, and parent P2 marked for Europe with B, C and D as children. When we use North America as a filter in the navigation state, and parent_rec_spec as the rollup key, then we will see an aggregate record for P1, A, B and C. But we will also see an aggregate record for B and C by itself (presumably because of the other parent_rec_spec value on these records).
    The actual data that we are testing with is more complicated, but the end result is similar. We also noticed that the additional aggregate records would not be created always, depending on the ordering of the records.
    The question that I need help with is this: is there a way to fine tune the rollup logic so that it can only include certain records (in the example above, we can change the rec_spec from PA and PB to PA_North_America and PB_Europe and then we would be interested in rolling up using values that end with NorthAmerica).
    By the way, we considered using separate rollup keys for each context (like parent_rec_spec_north_america and parent_rec_spec_europe), but the number of contexts is dynamic, and might grow large. So it is not easy for us to create the additional properties on the fly, and we are concerned about the possible large number of dimensions.

    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=2&threadid=1157850

  • A note on Setup Manager - Application Change Management Pack

    Hi All,
    This is Mugunthan, Development manager for iSetup and Setup Manager. I am happy to begin my note with the launch of Application Change Management Pack 3.1. For those who are not aware of Application Change Management Pack, it is a new product built on top of Oracle Enterprise Manager and comprises of three major modules namely Setup Manager, Customization Manager and Patch Manager. You can find more information about this pack here (LCM: Oracle Application Change Management Pack Setup Manager is enhanced and advanced version of iSetup on Oracle Enterprise Manager. There were good amount of reasons to re-architect iSetup on Oracle Enterprise Manager as Setup Manager.
    Why Setup Manager?
    Ability to migrate to data over point releases of EBS – EBS comes up with rollup patches on top of major releases periodically. It means that you have to certify the patch before it get deployed on to production which means that setup data are to be certified again. iSetup cannot connect between 12.0.4 to 12.0.6 or 12.0.6 to 12.1.1. We have achieved the data migration for above scenarios in Setup Manager (11i to R12 is not supported in Setup Manager)
    Projects – Setup Manager supports grouping of Extracts, Transforms, Loads and Reports as a single entity and can be deployed multiple times to multiple targets. The project consists of one or more tasks (of type Extract/Load/Transform/Report) and can be orchestrated according to your ends. Project execution supports scheduling which means that you can use this feature to sync up setup data between two instances at periodic internal. Projects can be shared with other users which is remarkable difference between iSetup and Setup Manager. You can share your projects with others in a combined development environment. The functional configuration data (Extracts) are stored in Oracle Enterprise Manager. This means that you can refresh EBS without losing Extracts.
    Integration with Change Approval mechanism – Execution of projects is integrated with change approval mechanism which means that you can control who executes what. Also, you have fine grain access control where you can control EBS targets assigned to a user.
    Offline Transformation – I would say this is the most unique feature of Setup Manager and as an implementer you would welcome this feature very much. iSetup has got very limited capability on Transformation. Here we have gone way ahead and support Transformation on almost all Setup Objects. We present you the extracted data in excel sheets. You can download the excel template and work offline. All the attribute value fields in the excel sheet are editable which means that you supply your own value. For example, you can download Operating Unit data in xls file and change operating unit “OU100” to “OU200” and upload it back to system and load to target instance. Please note that any attribute of Operating Unit setup data can be edited. Also, system has got intelligence and once you upload the excel sheet, it automatically changes all the inventory organization which belongs to “OU100” to “OU200”. This behavior can be controlled using attribute mapping which you can create in Setup Manager. Hold on, this is not the end, also you can add more operating unit in excel, say OU300 and OU400 and load it to target instance. You can delete few Operating Units from extracted data in excel sheet and load the remaining to target instance. This gives you complete flexibility to manage (add/edit/delete) functional configuration data offline. This is fantastic feature and please have a look at how it works.
    Advanced Filtering – Filter support in iSetup is not flexible where you cannot use comma separated values and complex sql join conditions. Also you do not know what query is executed behind the scenes to the data. All this problems are addressed in Setup Manager 3.1. We show you the “select clause” (SQL) associated with interface and provide you a text field where you can refer the select clause and provide your own custom where criteria (SQL). This means that filter support is unlimited and you can set filter any database columns. For example, you can extract “Responsibilities/Menu” which are active or created as on yesterday. You can extract all Operating Units excluding “OU100 and OU200”. We support all filter criteria that are supported by SQL.

    Hi,
    your note very interesting. Is there any other way to extract the configuration using SQL? not using Enterprise Manager? hope this will be fastest way then using GUI base.
    Thanks,
    Fahmi Fahlevi

  • Assembly cost rollup wrong for averag cost org

    HI,
    For two of the assembly items , when we complete wip jobs cost is coming as very less.
    When i see the item cost for these 2 assembly items , it seems cost rollup is not correct.
    Cost elements unit cost and material are showing up same value :X$
    Remaining fileds material overhead,Resource, Outside processing and resource overhead are blank with no cost.
    Include in rollup is already enabled and it is make item.
    So Cost rollup is not done properly for these 2 assembly items , but need a way how can we correct them.
    Please let me know the way to correct them.
    Thanks
    Vasudha.

    Hi,
    1. are all the 4 lines for same job? -- Yes
    please provide details of accounts on each of the 4 lines.
    For first 2 lines -- I00195-050002001-0-0-WB02-0-0-0 -- Inv valuation
    for 2nsd 2 lines -- I00195-052000000-0-0-WB02-0-0-0 -- WIP valuation
    2. have you setup any overheads?
    My guess is that the 4 lines corresponds to
    16625.29 WIP Assy Completion 30 => Inv Valuation Debit
    5689.43 WIP Assy Completion 30 => Inv Valuation Debit
    -16625.29 WIP Assy Completion -30 => WIP Material Account Credit
    -5689.43 WIP Assy Completion -30 => WIP Resource Account Credit
    Can you confirm? --Yes
    3. Go thru item cost history of finished good item and see if there is any change in cost on transaction date of WIP Completion Transaction.
    Check the details of cost elements.
    Distribution 4 lines are with date 02-FEB-2012 14:07:26
    If I look at record history of item costs form for this item last update date is -- 10-MAY-2012 15:19:03 and cost elements also of same date (costs button in item costs window)
    Here I can see costs as below
    Cost element basis rate or amount unit cost
    Material item 17.88 17.88
    Material item 0 0
    OSP item 0 0
    OSP item 0 0
    Please let me know if anything is required from my side to analyse the issue .
    Thanks for your response
    Vasudha.

  • Upgrade of Exchange 2007 SP2 rollup 5 to SP3

    Hi,
    We are trying to Upgrade Our Exchange 2007 server from todays SP2 With rollup 5 to the SP3 package.
    During the installation it stops right after stopping all of the services and asks for the exchangeserver..msi file, if i point it the that file in the SP3 package it still just asks me for the file again.
    Exchange Server is running on a Windows Server 2008 system
    Any ideas of what the solution could be?
    e is what i have from the exchangesetup.txt:
    [02.04.2014 22:56:54] [0] Setup will run the task 'uninstall-msipackage'
    [02.04.2014 22:56:54] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'' 
    [02.04.2014 22:56:54] [1] Beginning processing.
    [02.04.2014 22:56:54] [1] Property 'PackageName' is 'exchangeserver.msi'.
    [02.04.2014 22:56:54] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
    [02.04.2014 22:59:50] [1] [ERROR] Unexpected Error
    [02.04.2014 22:59:50] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. The installation source for this product is not available. Verify that the source exists and that you can access it. Error code is 1612.
    [02.04.2014 22:59:50] [1] [ERROR] The installation source for this product is not available. Verify that the source exists and that you can access it
    [02.04.2014 22:59:50] [1] Ending processing.
    [02.04.2014 22:59:50] [0] The Exchange Server Setup operation did not complete. For more information, visit
    http://support.microsoft.com and enter the Error ID.
    [02.04.2014 22:59:50] [0] End of Setup
    [02.04.2014 22:59:50] [0] **********************************************
    And here is the relevant from the exchangesetup.msilog file:
    === Verbose logging started: 02.04.2014  22:56:54  Build type: SHIP UNICODE 4.05.6002.00  Calling process: D:\Temp\exchange\Setup\ServerRoles\Common\ExSetup.exe ===
    MSI (c) (48:20) [22:56:54:795]: Resetting cached policy values
    MSI (c) (48:20) [22:56:54:795]: Machine policy value 'Debug' is 0
    MSI (c) (48:20) [22:56:54:795]: ******* RunEngine:
               ******* Product: {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (48:20) [22:56:54:796]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (48:20) [22:56:54:796]: Grabbed execution mutex.
    MSI (c) (48:20) [22:56:54:800]: Cloaking enabled.
    MSI (c) (48:20) [22:56:54:800]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (48:20) [22:56:54:809]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (34:B8) [22:56:54:815]: Running installation inside multi-package transaction {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (s) (34:B8) [22:56:54:815]: Grabbed execution mutex.
    MSI (s) (34:88) [22:56:54:818]: Resetting cached policy values
    MSI (s) (34:88) [22:56:54:818]: Machine policy value 'Debug' is 0
    MSI (s) (34:88) [22:56:54:818]: ******* RunEngine:
               ******* Product: {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (34:88) [22:56:54:819]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (34:88) [22:56:54:820]: Warning: Local cached package 'C:\Windows\Installer\b335acd4.msi' is missing.
    MSI (s) (34:88) [22:56:54:820]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (34:88) [22:56:54:820]: User policy value 'DisableMedia' is 0
    MSI (s) (34:88) [22:56:54:820]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Looking for sourcelist for product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Adding {24B2C164-DE66-44FE-B468-A46D9D5E6B31}; to potential sourcelist list (pcode;disk;relpath).
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Now checking product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Media is enabled for product.
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Trying source C:\Users\administrator.LKG\Desktop\Exchange 2007 sp2\.
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 2203 2: C:\Users\administrator.LKG\Desktop\Exchange 2007 sp2\exchangeserver.msi 3: -2147287037
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Processing net source list.
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Processing media source list.
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 2203 2:  3: -2147287037
    MSI (s) (34:88) [22:56:54:824]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:824]: SOURCEMGMT: Processing URL source list.
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:825]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (48:F0) [22:56:54:825]: User policy value 'DisableMedia' is 0
    MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Prompting user for a valid source.
    MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'DisableBrowse' is 0
    MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'AllowLockdownBrowse' is 0
    MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Browsing is enabled.
    MSI (c) (48:F0) [22:56:54:830]: Font created.  Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (48:F0) [22:56:54:830]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Now checking product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Media is enabled for product.
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing net source list.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing media source list.
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Trying media source ;1.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing URL source list.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:14) [22:58:49:184]: SOURCEMGMT: Trying source D:\Temp\exchange\exchangeserver.msi.
    MSI (c) (48:14) [22:58:49:184]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ExpMSI (s) (34:B8) [22:59:50:653]: I/O on thread 5248 could not be cancelled. Error: 1168
    MSI (s) (34:B8) [22:59:50:653]: I/O on thread 6584 could not be cancelled. Error: 1168
    MSI (s) (34:B8) [22:59:50:653]: I/O on thread 3208 could not be cancelled. Error: 1168
    MSI (s) (34:B8) [22:59:50:653]: I/O on thread 9372 could not be cancelled. Error: 1168
    MSI (s) (34:88) [22:59:50:654]: SOURCEMGMT: Failed to resolve source
    MSI (s) (34:88) [22:59:50:655]: MainEngineThread is returning 1612
    lorer 3: 2
    MSI (c) (48:14) [22:58:49:251]: SOURCEMGMT: Source is invalid due to client source out of sync (product code is the same).
    MSI (c) (48:14) [22:58:49:252]: Note: 1: 1731 2: -2147483645 3: exchangeserver.msi
    MSI (s) (34:B8) [22:59:50:656]: User policy value 'DisableRollback' is 0
    MSI (s) (34:B8) [22:59:50:656]: Machine policy value 'DisableRollback' is 0
    MSI (s) (34:B8) [22:59:50:657]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (34:B8) [22:59:50:657]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (34:B8) [22:59:50:658]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (34:B8) [22:59:50:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (34:B8) [22:59:50:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (34:B8) [22:59:50:659]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (34:B8) [22:59:50:660]: Restoring environment variables
    MSI (c) (48:20) [22:59:50:663]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (48:20) [22:59:50:664]: MainEngineThread is returning 1612
    === Verbose logging stopped: 02.04.2014  22:59:50 ===

    Hi
    Its the problem with the installation file  
    Its better you download a fresh installation pack from the tech-net and start the upgrade and it will be successful probably the latest one below SP3 RU9
    http://www.microsoft.com/en-us/download/details.aspx?id=36016
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you
    But that download is only the rollup 9 for the SP3.
    The current system is SP2 With rollup 5, will i not have to Upgrade With the SP3 package first?
    Before moving on to the rollups?

  • Entity data in alternate rollup not rolling up to parent.

    We have a number of different entity hierarchies in our application.  In our main entity hierarchy we have system rules setup to pull specific account data down to STAT accounts for particular entities and then that same STAT account data is pulled over to another entity multiplied by -1 as an offset so when the two entities rollup to a common parent the result is 0.  This offset entity exists in other hierarchies.  In the other hierarchies this offset entity STA account data does not rollup to the parent.  The data only shows up to Parent Currency Total in the value dimension.  Anything above that is empty, but viewing the parent.child combo in the main hierarchy and we can see data populated all the way up to Contribution Total, therefore roling up to the parent.  Below is the rules we have setup.
    Here in simplier terms is what we see.
    Hierarchy 1
    Entity A = $10
    Entity B = -$10
    Parent Entity C = $0
    Hierarchy 2
    Entity B = -$10 (Entity A does not exist in this hierarchy)
    Parent Entity D = $0 (should be -$10)
    Has anyone see an issue like this before?
    Rule
    If HS.Scenario.Member <> "ProForma" Then
       If HS.Value.Member <> "[Elimination]" Then
      If HS.Entity.Member() = "E261" Then
       HS.Clear "A#AC90285"
       HS.Exp "A#AC90285 = A#AC76740"
       HS.Clear "A#AC90286"
       HS.Exp "A#AC90286 = A#AC70160"
      End If
      If HS.Entity.Member() = "E271" Then
       HS.Clear "A#AC90285"
       HS.Exp "A#AC90285 = A#AC76740"
       HS.Clear "A#AC90286"
       HS.Exp "A#AC90286 = A#AC70160"
      End If
    'E103 - Corporate offset
    If YearPOV > "2013" Then
      If EntityPOV = "E103" Then
       HS.Clear "A#AC90285"
       HS.Exp "A#AC90285.I#[ICP None] = (E#E300.A#AC90285.I#[ICP Top] + E#E104.A#AC90285.I#[ICP Top]) * (-1)"
       HS.Clear "A#AC90286"
       HS.Exp "A#AC90286.I#[ICP None] = (E#E300.A#AC90286.I#[ICP Top] + E#E104.A#AC90286.I#[ICP Top]) * (-1)"
       HS.Clear "A#AC90287"
       HS.Exp "A#AC90287.I#[ICP None] = (E#E300.A#AC90287.I#[ICP Top] + E#E104.A#AC90287.I#[ICP Top]) * (-1)"
       HS.Clear "A#AC90288"
       HS.Exp "A#AC90288.I#[ICP None] = (E#E300.A#AC90288.I#[ICP Top] + E#E104.A#AC90288.I#[ICP Top]) * (-1)"
      End If
      End If

    There are trigger account rules, but not for this scenario.  This also occurred before we added those rules.  If you see below in our main hierarchy E100 we have a corporate offset for -2,695,080 which goes against the data rolling up in E104 and E300.  In the secondary hierarchy only E103 exists with one other entity E428 and for some reason that offset data does not roll up to the parent E060.

  • Oracle 10g Reports: Control Break using Group By Rollup

    Oracle 10g Contol-Break Reporting
    Hello. I am trying to create a report using Group By Rollup. The report should look like:
    MONTH......._WEEK_..... CODE.... TOTAL
    JULY..........WEEK 1..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ................WEEK 2..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ...............WEEK 3..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ...............WEEK 4..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ..........................MTH Tot:.....16
    AUG..........WEEK 1..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ................WEEK 2..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ...............WEEK 3..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ...............WEEK 4..... K1...........2
    ............................. K1...........2
    .............................SUB:.........4
    ..........................MTH Tot:.....16
    ..........................GRND TOT: 32
    Not sure how to group the codes into the correct month/week and the labels are a problem. Here is the table/data and a my poor attempt at using the Group by rollup. I'm still working on it but any help would be very nice.
    create table translog
    ttcd          VARCHAR2(5) not null,
    stime TIMESTAMP(6) not null,
    etime TIMESTAMP(6)
    insert into translog ( TTCD, STIME, ETIME)
    values ('T4', '01-JUL-12 12.00.01.131172 AM', '01-JUL-12 12.00.16.553256 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T4', '01-JUL-12 12.00.17.023083 AM', '01-JUL-12 12.00.37.762118 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('K2', '01-JUL-12 12.00.38.262408 AM', '01-JUL-12 12.00.40.686331 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('U1', '01-JUL-12 12.00.40.769385 AM', '01-JUL-12 12.00.41.281300 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('SK4', '08-JUL-12 12.00.41.746175 AM', '08-JUL-12 12.00.51.775487 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '08-JUL-12 12.00.53.274039 AM', '08-JUL-12 12.00.53.802800 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1','08-JUL-12 12.00.54.340423 AM', '08-JUL-12 12.01.03.767422 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '08-JUL-12 12.01.04.699631 AM', '08-JUL-12 12.01.04.744194 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('S2', '15-JUL-12 12.01.04.796472 AM', '15-JUL-12 12.01.04.817773 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '15-JUL-12 12.01.04.865641 AM', '15-JUL-12 12.01.05.154274 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '15-JUL-12 12.01.05.200749 AM', '15-JUL-12 12.01.05.508953 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '15-JUL-12 12.01.06.876433 AM', '15-JUL-12 12.01.07.510032 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '15-JUL-12 12.01.07.653582 AM', '15-JUL-12 12.01.07.686764 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('S2', '15-JUL-12 12.01.07.736894 AM', '15-JUL-12 12.01.08.163321 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-JUL-12 12.01.08.297696 AM', '22-JUL-12 12.01.08.562933 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '22-JUL-12 12.01.08.583805 AM', '22-JUL-12 12.01.08.620702 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-JUL-12 12.01.08.744821 AM', '22-JUL-12 12.01.08.987524 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-JUL-12 12.01.09.096695 AM', '22-JUL-12 12.01.09.382138 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-JUL-12 12.01.09.530122 AM', '22-JUL-12 12.01.10.420257 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '01-AUG-12 12.01.10.550234 AM', '01-AUG-12 12.01.10.581535 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('S2', '01-AUG-12 12.01.10.628756 AM', '01-AUG-12 12.01.10.656373 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '01-AUG-12 12.01.10.740711 AM', '01-AUG-12 12.01.10.768745 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '01-AUG-12 12.01.10.819635 AM', '01-AUG-12 12.01.10.900849 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '01-AUG-12 12.01.09.530122 AM', '01-AUG-12 12.01.10.420257 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '08-AUG-12 12.01.11.231004 AM', '08-AUG-12 12.01.24.073071 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '08-AUG-12 12.01.24.202920 AM', '08-AUG-12 12.01.24.244538 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('S2', '08-AUG-12 12.01.24.292334 AM', '08-AUG-12 12.01.24.318852 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '08-AUG-12 12.01.24.362643 AM', '08-AUG-12 12.01.24.397662 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1','15-AUG-12 12.01.09.530122 AM', '15-AUG-12 12.01.10.420257 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1', '15-AUG-12 12.01.24.414572 AM', '15-AUG-12 12.01.24.444615 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L2W', '15-AUG-12 12.01.24.478739 AM', '15-AUG-12 12.01.25.020265 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('K4', '15-AUG-12 12.01.25.206721 AM', '15-AUG-12 12.01.25.729493 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '15-AUG-12 12.01.25.784746 AM', '15-AUG-12 12.01.39.226921 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1','15-AUG-12 12.01.39.517953 AM', '15-AUG-12 12.01.50.775295 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-AUG-12 12.01.57.676446 AM', '22-AUG-12 12.01.58.252945 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-AUG-12 12.01.09.530122 AM', '22-AUG-12 12.01.10.420257 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-AUG-12 12.01.58.573242 AM', '22-AUG-12 12.02.10.651922 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('L1', '22-AUG-12 12.02.11.209305 AM', '22-AUG-12 12.02.24.140456 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('SK4','22-AUG-12 12.02.25.204035 AM', '22-AUG-12 12.02.25.580603 AM');
    insert into translog ( TTCD, STIME, ETIME)
    values ('T1','22-AUG-12 12.02.25.656474 AM', '22-AUG-12 12.02.25.689249 AM');
    select
    decode(grouping(trunc(stime)),1, 'Grand Total: ', trunc(stime)) AS "DATE"
    ,decode(grouping(ttcd),1, 'SUB TTL:', ttcd) CODE,count(*) TOTAL
    from translog
    group by rollup (trunc(stime),ttcd);}
    Thank you.

    830894 wrote:
    Oracle 10g Contol-Break Reporting
    Hello. I am trying to create a report using Group By Rollup. The report should look like:Couple of things:
    1) Your test data setup dows not match with your expected output &
    2) layout of data (like control break) should ideally be carried out using reporting tools
    Here is what you are probably looking for:
    SQL> select * from v$version ;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE     10.2.0.1.0     Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL> create table translog
      2  (
      3  ttcd VARCHAR2(5) not null,
      4  stime TIMESTAMP(6) not null,
      5  etime TIMESTAMP(6)
      6  );
    Table created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T4', '01-JUL-12 12.00.01.131172 AM', '01-JUL-12 12.00.16.553256 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T4', '01-JUL-12 12.00.17.023083 AM', '01-JUL-12 12.00.37.762118 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('K2', '01-JUL-12 12.00.38.262408 AM', '01-JUL-12 12.00.40.686331 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('U1', '01-JUL-12 12.00.40.769385 AM', '01-JUL-12 12.00.41.281300 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('SK4', '08-JUL-12 12.00.41.746175 AM', '08-JUL-12 12.00.51.775487 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '08-JUL-12 12.00.53.274039 AM', '08-JUL-12 12.00.53.802800 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1','08-JUL-12 12.00.54.340423 AM', '08-JUL-12 12.01.03.767422 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '08-JUL-12 12.01.04.699631 AM', '08-JUL-12 12.01.04.744194 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('S2', '15-JUL-12 12.01.04.796472 AM', '15-JUL-12 12.01.04.817773 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '15-JUL-12 12.01.04.865641 AM', '15-JUL-12 12.01.05.154274 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '15-JUL-12 12.01.05.200749 AM', '15-JUL-12 12.01.05.508953 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '15-JUL-12 12.01.06.876433 AM', '15-JUL-12 12.01.07.510032 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '15-JUL-12 12.01.07.653582 AM', '15-JUL-12 12.01.07.686764 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('S2', '15-JUL-12 12.01.07.736894 AM', '15-JUL-12 12.01.08.163321 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-JUL-12 12.01.08.297696 AM', '22-JUL-12 12.01.08.562933 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '22-JUL-12 12.01.08.583805 AM', '22-JUL-12 12.01.08.620702 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-JUL-12 12.01.08.744821 AM', '22-JUL-12 12.01.08.987524 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-JUL-12 12.01.09.096695 AM', '22-JUL-12 12.01.09.382138 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-JUL-12 12.01.09.530122 AM', '22-JUL-12 12.01.10.420257 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '01-AUG-12 12.01.10.550234 AM', '01-AUG-12 12.01.10.581535 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('S2', '01-AUG-12 12.01.10.628756 AM', '01-AUG-12 12.01.10.656373 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '01-AUG-12 12.01.10.740711 AM', '01-AUG-12 12.01.10.768745 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '01-AUG-12 12.01.10.819635 AM', '01-AUG-12 12.01.10.900849 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '01-AUG-12 12.01.09.530122 AM', '01-AUG-12 12.01.10.420257 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '08-AUG-12 12.01.11.231004 AM', '08-AUG-12 12.01.24.073071 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '08-AUG-12 12.01.24.202920 AM', '08-AUG-12 12.01.24.244538 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('S2', '08-AUG-12 12.01.24.292334 AM', '08-AUG-12 12.01.24.318852 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '08-AUG-12 12.01.24.362643 AM', '08-AUG-12 12.01.24.397662 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1','15-AUG-12 12.01.09.530122 AM', '15-AUG-12 12.01.10.420257 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1', '15-AUG-12 12.01.24.414572 AM', '15-AUG-12 12.01.24.444615 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L2W', '15-AUG-12 12.01.24.478739 AM', '15-AUG-12 12.01.25.020265 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('K4', '15-AUG-12 12.01.25.206721 AM', '15-AUG-12 12.01.25.729493 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '15-AUG-12 12.01.25.784746 AM', '15-AUG-12 12.01.39.226921 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1','15-AUG-12 12.01.39.517953 AM', '15-AUG-12 12.01.50.775295 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-AUG-12 12.01.57.676446 AM', '22-AUG-12 12.01.58.252945 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-AUG-12 12.01.09.530122 AM', '22-AUG-12 12.01.10.420257 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-AUG-12 12.01.58.573242 AM', '22-AUG-12 12.02.10.651922 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('L1', '22-AUG-12 12.02.11.209305 AM', '22-AUG-12 12.02.24.140456 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('SK4','22-AUG-12 12.02.25.204035 AM', '22-AUG-12 12.02.25.580603 AM');
    1 row created.
    SQL> insert into translog ( TTCD, STIME, ETIME)
      2  values ('T1','22-AUG-12 12.02.25.656474 AM', '22-AUG-12 12.02.25.689249 AM');
    1 row created.
    SQL> commit ;
    Commit complete.
    SQL> select case when row_number() over (partition by mth order by mth, wk, ttcd) = 1 then mth end as "Month"
      2        ,case when row_number() over (partition by mth, wk order by mth, wk, ttcd) = 1 and wk is not null then 'WEEK '||wk end as "Week"
      3        ,case when gttcd = 1 and gwk = 0 and gmth = 0 then 'SUB:'
      4              when gttcd = 1 and gwk = 1 and gmth = 0 then 'Month Total:'
      5              when gttcd = 1 and gwk = 1 and gmth = 1 then 'Grand Total:'
      6              else ttcd
      7         end as "Code"
      8        ,cnt as "Total"
      9    from (
    10          select trunc(stime, 'MM') as mth, to_char(stime, 'W') as wk, ttcd, count(*) as cnt
    11                ,grouping(trunc(stime, 'MM')) as gmth, grouping(to_char(stime, 'W')) as gwk, grouping(ttcd) as gttcd
    12            from translog
    13           group by rollup(trunc(stime, 'MM'), to_char(stime, 'W'), ttcd)
    14           order by trunc(stime, 'MM'), to_char(stime, 'W'), ttcd
    15         ) ;
    Month     Week   Code              Total
    01-JUL-12 WEEK 1 K2                    1
                     T4                    2
                     U1                    1
                     SUB:                  4
              WEEK 2 L1                    2
                     SK4                   1
                     T1                    1
                     SUB:                  4
              WEEK 3 L1                    1
                     S2                    2
                     T1                    3
                     SUB:                  6
              WEEK 4 L1                    4
                     T1                    1
                     SUB:                  5
                     Month Total:         19
    01-AUG-12 WEEK 1 L1                    1
                     S2                    1
                     T1                    3
                     SUB:                  5
              WEEK 2 L1                    1
                     S2                    1
                     T1                    2
                     SUB:                  4
              WEEK 3 K4                    1
                     L1                    3
                     L2W                   1
                     T1                    1
                     SUB:                  6
              WEEK 4 L1                    4
                     SK4                   1
                     T1                    1
                     SUB:                  6
                     Month Total:         21
                     Grand Total:         40
    35 rows selected.

  • Unable to install Exchange 2007 SP3 Rollup 13

    Grettings,
    I have a Server 2008 SP2 (64bit) DC with Exchange Server 2007 SP3 installed.
    I have followed all the pre-reqs per http://technet.microsoft.com/en-us/library/ee221147%28EXCHG.80%29.aspx?ppud=4
    However, it keeps failing. I've run the install in debug mode (/lvx*) and have narrowed it down to the following, but I can't make sense of it.
    All the proper services are running (WMI, various exchange services), all proper rights are give (domain admin, exchange admin, etc...) And proper user-rights are setup.
    No GPO's are setup.
    Need help. Here is a partial log:
    MSI (s) (74:14) [12:42:39:535]: Doing action: InstallExecute
    Action 12:42:39: InstallExecute.
    Action start 12:42:39: InstallExecute.
    MSI (s) (74:14) [12:42:39:550]: Running Script: C:\Windows\Installer\MSI16A2.tmp
    MSI (s) (74:14) [12:42:39:550]: PROPERTY CHANGE: Adding UpdateStarted property. Its value is '1'.
    MSI (s) (74:14) [12:42:39:550]: Machine policy value 'DisableRollback' is 0
    MSI (s) (74:14) [12:42:39:550]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (74:14) [12:42:39:550]: Executing op: Header(Signature=1397708873,Version=405,Timestamp=1151821140,LangId=1033,Platform=589824,ScriptType=1,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
    MSI (s) (74:14) [12:42:39:550]: Executing op: ProductInfo(ProductKey={24B2C164-DE66-44FE-B468-A46D9D5E6B31},ProductName=Microsoft Exchange Server,PackageName=exchangeserver.msi,Language=1033,Version=134414419,Assignment=1,ObsoleteArg=0,,,PackageCode={16D94F8A-4406-41EA-9146-7A80F4F42DC1},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
    MSI (s) (74:14) [12:42:39:550]: Executing op: DialogInfo(Type=0,Argument=1033)
    MSI (s) (74:14) [12:42:39:550]: Executing op: DialogInfo(Type=1,Argument=Update Rollup 13 for Exchange Server 2007 Service Pack 3 (KB2917522))
    MSI (s) (74:14) [12:42:39:550]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back actions,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
    MSI (s) (74:14) [12:42:39:550]: Executing op: SetBaseline(Baseline=0,ProductVersion=8.3.83)
    MSI (s) (74:14) [12:42:39:566]: Executing op: SetBaseline(Baseline=1,)
    MSI (s) (74:14) [12:42:39:566]: Executing op: ActionStart(Name=CA_CUSTOMER_PATCH_ROLLBACK,,)
    Action 12:42:39: CA_CUSTOMER_PATCH_ROLLBACK.
    MSI (s) (74:14) [12:42:39:566]: Executing op: CustomActionSchedule(Action=CA_CUSTOMER_PATCH_ROLLBACK,ActionType=1345,Source=BinaryData,Target=CAQuietExec,CustomActionData="D:\Program Files\Microsoft\Exchange Server\\bin\QuietExe.exe" "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe"
    " -command . 'D:\Program Files\Microsoft\Exchange Server\\scripts\customization\CustomPatchInstallerActions.ps1' PatchRollbackActions")
    MSI (s) (74:14) [12:42:39:566]: Executing op: ActionStart(Name=CA_CUSTOMER_PREPATCH_INSTALL,,)
    Action 12:42:39: CA_CUSTOMER_PREPATCH_INSTALL.
    MSI (s) (74:14) [12:42:39:566]: Executing op: CustomActionSchedule(Action=CA_CUSTOMER_PREPATCH_INSTALL,ActionType=1089,Source=BinaryData,Target=CAQuietExec,CustomActionData="D:\Program Files\Microsoft\Exchange Server\\bin\QuietExe.exe" "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe"
    " -command . 'D:\Program Files\Microsoft\Exchange Server\\scripts\customization\CustomPatchInstallerActions.ps1' PrePatchInstallActions")
    MSI (s) (74:14) [12:42:39:566]: Creating MSIHANDLE (17) of type 790536 for thread 5908
    MSI (s) (74:F8) [12:42:39:566]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI183A.tmp, Entrypoint: CAQuietExec
    MSI (s) (74:EC) [12:42:39:566]: Generating random cookie.
    MSI (s) (74:EC) [12:42:39:582]: Created Custom Action Server with PID 4576 (0x11E0).
    MSI (s) (74:40) [12:42:39:660]: Running as a service.
    MSI (s) (74:40) [12:42:39:675]: Hello, I'm your 32bit Impersonated custom action server.
    MSI (s) (74!80) [12:42:40:832]: Creating MSIHANDLE (18) of type 790531 for thread 3712
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    MSI (s) (74!80) [12:42:40:832]: Closing MSIHANDLE (18) of type 790531 for thread 3712
    MSI (s) (74!80) [12:42:40:832]: Creating MSIHANDLE (19) of type 790531 for thread 3712
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    MSI (s) (74!80) [12:42:40:832]: Closing MSIHANDLE (19) of type 790531 for thread 3712
    MSI (s) (74:F8) [12:42:40:832]: Closing MSIHANDLE (17) of type 790536 for thread 5908
    MSI (s) (74:14) [12:42:40:847]: Executing op: ActionStart(Name=CA_ROLLBACK_SAVEDATA_STOP_SERVICES,,)
    Action 12:42:40: CA_ROLLBACK_SAVEDATA_STOP_SERVICES.
    MSI (s) (74:14) [12:42:40:847]: Executing op: CustomActionSchedule(Action=CA_ROLLBACK_SAVEDATA_STOP_SERVICES,ActionType=1281,Source=BinaryData,Target=CAQuietExec,CustomActionData="D:\Program Files\Microsoft\Exchange Server\\bin\QuietExe.exe" "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe"
    " -command . 'D:\Program Files\Microsoft\Exchange Server\\bin\servicecontrol.ps1' AfterPatch")
    MSI (s) (74:14) [12:42:40:847]: Executing op: ActionStart(Name=CA_SAVEDATA_STOP_SERVICES,Description=Stopping services,Template=Service: [1])
    Action 12:42:40: CA_SAVEDATA_STOP_SERVICES. Stopping services
    MSI (s) (74:14) [12:42:40:847]: Executing op: CustomActionSchedule(Action=CA_SAVEDATA_STOP_SERVICES,ActionType=1025,Source=BinaryData,Target=CAQuietExec,CustomActionData="D:\Program Files\Microsoft\Exchange Server\\bin\QuietExe.exe" "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe"
    " -command . 'D:\Program Files\Microsoft\Exchange Server\\bin\servicecontrol.ps1' BeforePatch")
    MSI (s) (74:14) [12:42:40:847]: Creating MSIHANDLE (20) of type 790536 for thread 5908
    MSI (s) (74:BC) [12:42:40:847]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI1D3D.tmp, Entrypoint: CAQuietExec
    MSI (s) (74!44) [12:50:03:781]: Creating MSIHANDLE (21) of type 790531 for thread 5444
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    MSI (s) (74!44) [12:50:03:797]: Closing MSIHANDLE (21) of type 790531 for thread 5444
    MSI (s) (74!44) [12:50:03:797]: Creating MSIHANDLE (22) of type 790531 for thread 5444
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    MSI (s) (74!44) [12:50:03:797]: Closing MSIHANDLE (22) of type 790531 for thread 5444
    MSI (s) (74:BC) [12:50:03:797]: Closing MSIHANDLE (20) of type 790536 for thread 5908
    Action ended 12:50:03: InstallExecute. Return value 3.
    /r
    Joe Hanchey

    Hi Joe,
    Glad to know that you have solved this issue.
    Thanks for your generous sharing.
    Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Supply Chain Cost Rollup error

    Hi All,
    need some help with this ...we have setup a new Standard Costed Inventory org and then we are trying to run the program : Supply Chain Cost Rollup - Print Report for this new org.
    This program has been ending in error mentioned below for this org while it is running fine for all the other inventory orgs.
    Could someone please advise what could be the issue here :
    stat_low = 86
    stat_high = 0
    emsg:was terminated by signal 6
    Enter Password:
    JVMCI161: FATAL ERROR in native method: Wrong method ID used to invoke a Java method
         at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
         at oracle.reports.engine.EngineImpl.run(EngineImpl.java:441)
         at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:975)
         at oracle.reports.server.ExecAsynchJobThread.run(ExecAsynchJobThread.java:54)
    Report Builder: Release 10.1.2.3.0 - Production on Mon Feb 27 11:10:39 2012
    JVMDG217: Dump Handler is Processing Signal 6 - Please Wait.
    JVMDG303: JVM Requesting Java core file
    JVMDG304: Java core file written to /applcommon01/EPRODR/log/EPRODR/javacore64618496.1330361288.txt
    JVMDG215: Dump Handler has Processed Error Signal 6.
    With due Regards..

    user5149250 wrote:
    No it works fine for the other Standard & Average costed orgs.
    Is there anything which could be cross checked or confirmed.Have you reviewed these docs?
    Account Analysis - (180 Char) Error: JVMCI161: FATAL ERROR in native method [ID 1300008.1]
    R12 Trial Balance Detail Report (GLRTBD) Errors With: 'JVMCI161: FATAL ERROR in native method' [ID 1085923.1]
    FAPROJ Depreciation Projection Terminated by Signal 6 [ID 1319134.1]
    Thanks,
    Hussein

  • Error 1603 when installing Rollup 4 for Exchange 2010 SP2

    Hi There,
    I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems.  However I have hit a problem with my 4th server.
    I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
    I have tried the following without success:
    Turning off UAC
    Running from elevated CMD prompt
    Running from elevated Powershell command
    Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
    Re-downloading the RU4 install package to the local disk on the server
    Adding more RAM and CPU resources
    I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
    but then all of a sudden just begins "Rolling back actions".
    The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
    to do so, could this have anything to do with it?
    I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
    I am running out of ideas so any help would be greatly appreciated.

    skippy-85,
    Any updates on this Issues?
    In case if the issue stands
    resolved, Please mark Solution for this Thread and close this.
    In case if you still have
    the issue with the RU4 installation do let us know!
    Thanks
    Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!!

  • Install MS CRM 2013 Rollups

    Could you please let me know the prerequisites for Installing MS   Dynamics CRM 2013 latest Rollup 
    During early stage of CRM development environment setup, While Installing Rollup, I had corrupted the  MS CRM Environment L
    Please let me know the steps for installing MS CRM 2013 latest Rollup

    Just download and install the rollup. Note that, if you want Crm 2013 service pack 1 installed, then you'll need to install CRM 2013 RTM, then Crm 2013 service pack 1, then the most recent update rollup for Crm 2013 service pack 1. The update rollups for
    Crm 2013 RTM are different from those for CRM 2013 service pack 1
    Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

  • Sub-project rollup to Master project-How to achieve this??

    Dear Dina,
    In capital project: There is 1 master project, under master project there are 10 sub-projects ,how to rollup the sub-projects information into master project [client wants to see the all sub-project information at master project level only as well as sub-project level also]
    Each Sup-Project has a Project ID and Project Name,If we consider each sub project as one task but as per the client requirement each sub-project has a separate Project ID, and as well as Master project also has Project ID (in this scenario how to roll-up the sub-project information into master project).
    Here client wants to see all sub-project information at master project level with the code of Project ID and as well as individual at sub-project level with the code of Sub-project Project ID”,each project has [Sub-project and master project] Project ID, Project name, and Project Number
    could u help me on rolling up concept on the sub-project informations into master project level....
    thanks a lot n advance.....

    Hi
    The ability to see the rollup information is part of Project Management.
    When you setup the master project, go to Option and open the Structures page. Flag the check box named "Enable the project as a Program".
    Now go to Tasks pages, and open a lowest level task. Open the Options page for the task, and you will see there "sub Project Association. Select that option and on the opened page you can list the subproject. Note you can link all sub-projects to the same task, or to different tasks of the master project.
    Go to Project Reporting Tab of Project Management. There you should select the report as a project if you want to see data on each project, master and sub-projects, individually. Select the report as 'Program' to see the rollup up data for he master project and all its sub-projects.
    Dina

Maybe you are looking for