ROLLUPTIME as variable in customer exit

Hi,
my Customer needs a query, where several variables (last date, month, ... previous month, ...) should be set based on a date when the data was last refreshed (ROLLUPTIME).
I know how to show this information on the WEB (Text element) but I would actually need it in a Customer exit procedure.
Can anyone help me with this issue.
Thanks.

Hi Tomaz,
Please try attached sample code in program ZXRSRU01
In my example variable Z_FISCP'(please create it)
represents a single value of Io 0FISCPER and is filled
with rollup year and month from table RSREQDONE. In order to
determine the most current request as key for reading this table
you have to restrict a key figure in your query with
variable 0S_RQMRC' of IO REQUEST ID and hide it.
I couldn't testist, hope it works.
WHEN 'Z_FISCP'.
    Data: WA_DATE Type sy-datum.
    Data: WA_FISCP(7) Type N.
    IF I_STEP = 2.         "after variable popup
            LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = '0S_RQMRC'.
Select single TDATUM from RSREQDONE into WA_date where RNR = LOC_VAR_RANGE-low.
CONCATENATE WA_DATE(4) '0' WA_DATE+4(2) INTO WA_FISCP.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW = WA_FISCP.
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.
Regards
Joe

Similar Messages

Formula variable in Customer exit

Hi Experts,
I need help.
I create
 first Formula variable (Z_OPTSEL) for a user entry, mandatory, ready for input, dimension ID = Number and
 second Formula variable (Z_OPT1), customer exit, mandatory, not ready for input, dimension ID = Number .
User Exit code in ZXRSRU01 is :
When 'Z_OPT1'.
case i_step.
when '2'.
clear e_t_range.
read table I_T_VAR_RANGE INTO loc_var_range with key vnam = 'Z_OPTSEL'.
if sy-subrc = 0.
 if loc_var_range-low = '1'.
 l_s_range-low = '2'.
 endif.
 if loc_var_range-low = '2'.
 l_s_range-low = '0'.
 endif.
endif.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
clear l_s_range-high.
APPEND l_s_range TO e_t_range.
endcase.
Unfortunately, I get no value in loc_var_range-low (from Z_OPTSEL) so , I never can fill up Z_OPT1 !! What could I do to fix it ?
Any help would be welcome .
Thanks


My Dear Friend 
Please try the below code: 
Case vnam. 
When 'Z_OPT1'. 
check i_step = 2. 
 
read table I_T_VAR_RANGE INTO loc_var_range with key vnam = 'Z_OPTSEL'. 
 
if sy-subrc = 0. 
Clear l_s_range. 
if loc_var_range-low = '1'. 
l_s_range-low = '2'. 
endif. 
if loc_var_range-low = '2'. 
l_s_range-low = '0'. 
endif. 
endif. 
l_s_range--sign = 'I'. 
l_s_range-opt = 'EQ'. 
APPEND l_s_range TO e_t_range. 
endcase. 
 
Hope it helps. 
Cheers Abhijit 

Removed

Prob in text variable with customer exit

Hi to all
I am working in PA module in HR ,In my Report i have to count total number of trainee and lateral in given Date range that From date to To Date , Before that i have to calculate a Total Employee Strength before one day of From date , suppose user enter a 1st of April 2007 to 1st of jun 2007 , so Employee strength should be calculated on the 31march 2007, for that i have written custome exit , now i am getting a value also , for Display that date have a created a text variable with customer exit , but i am not able to get that date , it should be display strength as on 31march2007 , instead of it is displaying Strength as on 00.00.0000.I am giving a cod also
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = 'EB1A'.
append LS_Range to e_t_range.
WHEN 'ZPA_DATE'.
if i_step = 3.
READ TABLE I_T_VAR_RANGE INTO L_S_VAR_RANGE WITH KEY VNAM = 'ZPA_DATE'.
IF SY-SUBRC = 0.
ZTEST = L_S_VAR_RANGE-LOW.
ztest1 = ZTEST - 1.
export p = ztest1 to MEMORY ID 'VALUE'.
ENDIF.
endif.
WHEN 'ZFRMDAT'.
if i_step = 3.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest.
append LS_Range to e_t_range.
endif.
when 'ZPA_CDAT'.
if i_step = 3.
ztest1 = ztest - 1.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest1.
append LS_Range to e_t_range.
endif.
when 'ZPA_VAR3'.
if i_step = 3.
ztest1 = ztest - 1.
import p = ztest1 from memory id 'VALUE'.
concatenate ztest16(2) ztest14(2) ztest1+0(4) into date separated by '.'.
move date to temp.
move 'Hello' to temp.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = temp.
append LS_Range to e_t_range.
endif.
Please help me to come out
Thanks

Hi Stefania,
to me it looks like your local variable num_mese is not defined with the correct data type.
Try to change
if num_mese = 09 to if num_mese = '09',
same for 10 -> '10', 11 -> '11'.
If that does not help please let me know your coding where you define the type of num_mese (DATA statement).
Regards
Stephan

Formula Variable with customer Exit (ABAP Code)

Hi Experts,
Please advise me wether i am going in the right way to achieve my requirment else please advise me any alternate approach and update me with the abap code for my customer exit as i am not familiar with ABAP.
My Requirment:
Data :
Emp_ID----Start_Date(DATS)---End_Date(DATS)
I had a user entry (intreval) VARIABLE created on Start_Date
User will enter the date intreval he want to analyze...
Ex: 01.01.2008 to 01.02.2008
Now i want to use the No of Days between user entered date intreval in my calculaction of a keyfigure
In the above example it is 31 days
So i created a Formula Variable of Customer Exit now i need a code that will
pass the user entered dates to
FM: FIMA_DAYS_AND_MONTHS_AND_YEARSImport parameters Value
I_DATE_FROM 01.01.2008
I_DATE_TO 01.02.2008
I_FLG_SEPARATE ' '
Export parameters Value
E_DAYS 31
E_MONTHS 1
E_YEARS 1
and need to pass the E_DAYS (31) to the result of formula
User Entry Variable (Intreval) : ZST_VAR
Formula Variable (Customer Exit) : ZND_EXIT
Code
WHEN 'ZND_EXIT'.
    DATA: low_date2 TYPE d,
    high_date2 TYPE d,
    num_days TYPE N,
    new_low_date2 TYPE d.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO ls_varrange WHERE vnam = 'ZST_VAR'.
        CLEAR l_s_range.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        ls_varrange-low = low_date2.
        ls_varrange-high = high_date2.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
    I_DATE_FROM          = low_date2
    I_DATE_TO            = high_date2
    I_FLG_SEPARATE       = ' '
IMPORTING
    E_DAYS               = NUM_DAYS
l_s_range = NUM_DAYS.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endif.

Hello,
Before the WHEN statement it shoud have a CASE statement. In the user exit coding place your WHEN statement anywhere between CASE...ENDCASE statement.
your code should look like
DATA: low_date2 TYPE d,
high_date2 TYPE d,
num_days TYPE N,
new_low_date2 TYPE d.
Case i_vnam.
WHEN 'ZND_EXIT'.
IF i_step = 2.
LOOP AT i_t_var_range INTO ls_varrange WHERE vnam = 'ZST_VAR'.
CLEAR l_s_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
low_date2 = ls_varrange-low.
high_date2 = ls_varrange-high.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = low_date2
I_DATE_TO = high_date2
I_FLG_SEPARATE = ' '
IMPORTING
E_DAYS = NUM_DAYS
l_s_range-low = NUM_DAYS.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endcase.
Thanks
Chandran

Formula Variable with customer exit

Hi,
can we use Formula variables with customer exit based on characteristics(ex Bill date)? if yes, can you guys help me on this.
Thanks
kri

Yes , you can use a formula variable with customer exit based on characteristics .
Depends on the requirement what you want to show in the formula variable ,
Eg : if you want to show the max fiscal year period , in that case :
create a new formula in the keyfigure section of your query , go to edit , you can see formula variable below the keyfigures ,
right click on the same and create new formula variable :
Write the code for the formula varible in the backend as we do for normal customer exit varaible :
for this e.g the code will be :
FORM get_variable_value
      tables E_T_RANGE      type RSR_T_RANGESID
      using I_VNAM          type RSZGLOBV-VNAM
            I_VARTYP        type RSZGLOBV-VARTYP
            I_IOBJNM        type RSZGLOBV-IOBJNM
            I_S_COB_PRO     type RSD_S_COB_PRO
            I_S_RKB1D       type RSR_S_RKB1D
            I_PERIV         type RRO01_S_RKB1F-PERIV
            I_T_VAR_RANGE   type RRS0_T_VAR_RANGE
            I_STEP          type I.
DATA L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA loc_var_range LIKE rrrangeexit.
Data : l_inPer TYPE string.
IF i_step = 1.
Select min( distinct FISCPER )
        from /BIC/A(DSO name)
        into l_minper .
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    l_s_range-low = l_minper .
    APPEND l_s_range TO e_t_range.
endif.
drag the formula variable in the new formula created and exexcute the query , you will be able to see the output .
This is just an example , your code will differ as per your requirement .

Text Variable With Customer Exit Logic/ABAP Code

Hi Experts,
Could you please help me with the Logic/Code that i need to use in Calculacting The TEXT Variable Using CUSTOMER EXIT
I had a rolling report in which there are 14 Calculacted Keyfigures (Not Restricted KF),Which are
M-1,M-2,M-3,M-4,M-5........M-14
In MAY2009
M-1 represents (Current Month -1) APR2009
M-2 represents (Current Month -2) MAR2009
M-3 represents (Current Month -3) FEB2009
M-4 represents (Current Month -4) JAN2009
M-5 represents (Current Month -5) DEC2008
M-6 represents (Current Month -6) NOV2008
M-7 represents (Current Month -7) OCT2008
M-13 represents (Current Month -13) APR2008
M-14 represents (Current Month -14) MAR2008
In JUNE2009
M-1 represents (Current Month -1) MAY2009
M-2 represents (Current Month -2) APR2009
M-3 represents (Current Month -3) MAR2009
M-4 represents (Current Month -4) FEB2009
M-5 represents (Current Month -5) JAN2009
M-6 represents (Current Month -6) DEC2008
M-7 represents (Current Month -7) NOV2008
M-13 represents (Current Month -13) MAY2008
M-14 represents (Current Month -14) APR2008
Currently the Description of CKF is named as M-1,M-2..M-14.My requirment is to develop Text Variables that displays the description as MMMYYYY

Sample code, NO syntax check...!!
CASE i_vnam. " Variablenname
WHEN 'M-1'. "For Variable <M-1>
 Data: l_peri type E_BUPER, "Declare variable for Period
 l_year type E_GJAHR "Declare variable for year
 IF i_step = 2.
 DATA l_s_range LIKE LINE OF e_t_range.
 CLEAR l_s_range.
 CALL FUNCTION 'DATE_TO_PERIOD_CONVERT' " By providing Date this FM gives period and year
 EXPORTING
 I_DATE = SY-DATUM "System Date
 I_PERIV = V3 "Fiscal Variant
 IMPORTING
 E_BUPER = l_peri "for period is date is today period = 005
 E_GJAHR = l_year. "for Year = 2009
 l_peri = l_peri - 1. "To reduce 1 from period (005 - 1 = 004)
 IF l_peri = '004' "Check value of period.
 Concatenate 'APR' l_year into l_s_range-low. "concatenate 'APR' & Year into Low.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
 ENDIF.
For M-2 subtract 2 and repeate same.

Text Variable With Customer Exit ABAP Code

Hi Experts,
Could you please help me with the Logic/Code that i need to use in Calculacting The TEXT Variable Using CUSTOMER EXIT
I had a rolling report in which there are 14 Calculacted Keyfigures (Not Restricted KF),Which are
M-1,M-2,M-3,M-4,M-5........M-14
My requirment is to get the MMM.YYYY based on Sy Date as a title of the column
In MAY2009
M-1 represents (Current Month -1) APR2009
M-2 represents (Current Month -2) MAR2009
M-3 represents (Current Month -3) FEB2009
M-4 represents (Current Month -4) JAN2009
M-5 represents (Current Month -5) DEC2008
M-6 represents (Current Month -6) NOV2008
M-7 represents (Current Month -7) OCT2008
M-13 represents (Current Month -13) APR2008
M-14 represents (Current Month -14) MAR2008
In JUNE2009
M-1 represents (Current Month -1) MAY2009
M-2 represents (Current Month -2) APR2009
M-3 represents (Current Month -3) MAR2009
M-4 represents (Current Month -4) FEB2009
M-5 represents (Current Month -5) JAN2009
M-6 represents (Current Month -6) DEC2008
M-7 represents (Current Month -7) NOV2008
M-13 represents (Current Month -13) MAY2008
M-14 represents (Current Month -14) APR2008
Currently the Description of CKF is named as M-1,M-2..M-14.My requirment is to develop Text Variables that displays the description as MMMYYYY

Amrit I think u72720 wanted to know how to get MMYYYY in the column headings.
this can be achieved using text variable easily.
steps
1. Right click and go to properties and click the button next to description box.
2. Add any existing text var from the list
3. now right click on this var in the desription box and select 'new variable'
4. give var name description
   processing type ->replacement path
   replace with char-> fiscal period (or calmonth if that is what restricted in your column)
   select value as 'Key'
finish creation and use this var in all the selection column headings (remove M-1, M-2 etc)
you will get mmyyyy decriptions for every column depending on month of that column

Text Variable using Customer Exit .

Hello Friends. I have a requirement to create Text Variable using Customer Exit . So I created the Text Variable as "ZVRBMS" and assigned that with YTD &ZVRBMS& in the Structure of Query Desigener . so that Out put will YTD AUTO
OR YTD RETAIL
Now this Auto And Retail comes from Version that user choose via variable ZFIBMSVER IN User Promt. if ZFIBMSVER = 10
then ZVRBMS = auto . and if ZFIBMSVER = 20
then ZVRBMS = RETAIL
Please correct my ABAP code in customer exit and let me know to make this work
when 'ZVRBMS'.
    if I_STEP = 2.
      clear LOC_VAR_RANGE.
      loop at I_T_VAR_RANGE into LOC_VAR_RANGE.
        if LOC_VAR_RANGE-VNAM = 'ZFIBMSVER'.
      if SY-SUBRC = 0 OR LOC_VAR_RANGE-LOW = '10'.
        L_S_RANGE-LOW = 'AUTO'.
      elseif LOC_VAR_RANGE-LOW = '20'.
        L_S_RANGE-LOW = 'RETAIL'.
      L_S_RANGE-SIGN ='I'.
      L_S_RANGE-OPT = 'EQ'.
      append L_S_RANGE to E_T_RANGE.
endif.
endif.
exit.
      endloop.
endif.
Thanks
Soniya

The code should be:
when 'ZVRBMS'.
if I_STEP = 2.
clear LOC_VAR_RANGE.
loop at I_T_VAR_RANGE into LOC_VAR_RANGE.
if LOC_VAR_RANGE-VNAM = 'ZFIBMSVER'.
if LOC_VAR_RANGE-LOW = '10'.
L_S_RANGE-LOW = 'AUTO'.
elseif LOC_VAR_RANGE-LOW = '20'.
L_S_RANGE-LOW = 'RETAIL'.
endif.
L_S_RANGE-SIGN ='I'.
L_S_RANGE-OPT = 'EQ'.
append L_S_RANGE to E_T_RANGE.
endif.
exit.
endloop.
endif.

Variables with customer exit

Please search the forums before posting
i want an example for variables using customer exit with steps
Edited by: Arun Varadarajan on Mar 15, 2009 7:25 PM

Hi,
You can define 'Formula' variables in your customer exit..for example..
you need to calculate no of machine running hours per month, in order to
caculate the machine total utilization time..in this context.. you need to know
how may hours are there in an month by month..
you can define a variable and write the code in the customer exit for deriving the total no. of hours available for that month and get that value into a variable for further calution like deducting the down time and set up time so on..in your
calculated KF..
Hope this helps..
Assign points if useful..
Cheers,
Pattan.

Characterstic variable with customer exit

Can u some bady help me.
How to express about Characterstic variable with customer exit
Edited by: chenna reddy on Aug 7, 2008 9:48 PM

Hi,
The variable may be personalized with some value.
To remove the personalization for a user:
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

Double Role for Analysis Authorization using Variable via Customer Exit

Hi Guys I have been implementing AA using variable via customer exit and I have run into this problem, I wonder anyone have encountered this.
Example I have a User having 2 sets of authorization Roles
Role 1
Personnel Area = A, B
Personnel Sub Area = 1,
Role 2
Personnel Area = A
Personnel Sub Area = 1, 2
And what we can derive this that is the user is able to see A-1 B-1 and A-2 BUT NOT B-2 when we run all.
But instate when we run the report it is drawing B-2 as well as because we are entering
Personnel Area = A,B
Personnel Sub area = 1,2
Any idea how to solve this?
<removed by moderator>
Edited by: Siegfried Szameitat on Dec 3, 2008 2:41 PM

Hello Chee Jason,
Are you working with version 3.5 or 7.0
How do you specify Hierarchy variable?
Any advise you can share is very much appreciated.
Thanks,
Patrick

Hierarchy Authorization using Variable via Customer Exit

Hi experts,
I am wondering if I can do Hierarchy Authorization using Variable via Customer Exit? I know it can be done on normal value authorization by putting $+(the variable name). So can we do the same for Hierarchy authorization?
For my case I have a 0ORGUNIT and I would allow the role to access anything below its node. So do I put $VARORGUNIT in Technical Node Name and Hierarchy name as ORGEH, Type of authorization = 1 and Area of Validity = 3.
Points will be given!
Thanx!

Hello Chee Jason,
Are you working with version 3.5 or 7.0
How do you specify Hierarchy variable?
Any advise you can share is very much appreciated.
Thanks,
Patrick

I need example for VARIABLES with Customer Exit.

hi every body i need example for Variable for Customer Exit.

Hi,
You can define 'Formula' variables in your customer exit..for example..
you need to calculate no of machine running hours per month, in order to
caculate the machine total utilization time..in this context.. you need to know
how may hours are there in an month by month..
you can define a variable and write the code in the customer exit for deriving the total no. of hours available for that month and get that value into a variable for further calution like deducting the down time and set up time so on..in your
calculated KF..
Hope this helps..
Assign points if useful..
Cheers,
Pattan.

Using Formula Variable in Customer Exit variable

Hi,
I want to assign valuees of 2 Formula Variables to one cstomer exit variable based on some Characteristic.
Example. Formula variables are Early and Late. If Early = 3 and Late = 4 , I want to pass value to the Customer Exit variable as Low = 3 and High = 4.
The problem is in I_T_VAR_RANGE there is no value for formula variable in LOW field.
Other variables based on Characteristics have values in this field.
What can I do in this case?
Regards
SSS

SSS,
You can restrict your characteristic with two variables in the value range options of restricting.
One can be used as low and the other can be high.
Hope that helps.
Thanks.

Issue with Variables using Customer Exit.

Dear All,
I have the following scenario,
I the Variable Screen I have 4 variables, lets say for eg: Plant, Material, Material Group, Calendar Day.
Then I have 4 Customer Exit Variables in the report, 2 of type Char Value Variables and 2 of type Text Variables.
I have written the customer exit code and all the 4 customer exit variables derive their values from the Calendar Day Variable from Variable Screen.
In the Variable screen if i give the values only for the variable calendar the report executes fine.
But along with Calendar Day If I enter values for any other variable the report gives the following error message - "No value could be determined for variable VAR_CALDAY_CEXIT_1." VAR_CALDAY_CEXIT_1 is the name of my one of the Customer Exit Variables.
Please let me know how to solve this problem.
Cheers,
Neel.

IF i_step = 2.
CASE i_vnam.
       WHEN 'VAR_CALDAY_CEXIT_1'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 1.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
       WHEN 'VAR_CALDAY_TEXT_CEXIT_1'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 1.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
        WHEN 'VAR_CALDAY_CEXIT_2'.
        LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 2.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
       WHEN 'VAR_CALDAY_TEXT_CEXIT_2'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 2.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
ENDCASE.
ENDIF.
'VAR_CALDAY_MULSIN_MAN' is the Calenday Day Variable from the Variable Screen.
It is of type multiple single values.
The User enters two dates and then the code is utilized to pass these 2 dates to 2 Char Value Variables and 2 Text Variables.
Once again, if i do not enter the values for any other variable then the report executes fine.
Cheers,
Neel.

ROLLUPTIME as variable in customer exit

Similar Messages

Maybe you are looking for