Romanian characters in Description and captions

How do I get Romanian characters into the descriptions of my photos in iPhoto so they will appear in the captions of my slideshow?
I need characters like the t with the squiggly underneath and the s with the squiggly, a with a hat, a with a u above it, etc.
I read elsewhere that I could use option+c,X where X was s or t, but I immediately get the French character of c with squiggly underneath as soon as I release option+c.
I have the Romanian keyboard activated in Preferences.

Welcome to the Apple Discussions. See if this will let you select the right key combination to get what you want:
1 - go to the System/Language & Text Preference pane and click on the Input Sources button at the far top right.
2 - Then select the checkbox at the bottom for "Show Input menu in menu bar".
3 - click on the squarish mini keyboard in the menu bar on the right and select Show Keyboard Viewer.
Now you can depress various key modifiers (Command, Option, Control or a combination of them) to see what characters are under the various keys. It works for English so lets keep our fingers crossed.
OT

Similar Messages

How can i type international alphabet characters into keywords, title, and captions in Lightroom 4?

How can i type international alphabet characters into keywords, titles, and Captions in Lightroom 4? Usual Microsoft key shortcuts not working.

I haven't found a way to do that directly, but there is a workaround. It' s a bit cumbersome, so it's only good for the occasional character.
In MS Word or any other text editor create a file that contains all the international characters you need.
When you need to insert one of these characters into Lr (captions, title, keywords) copy the character from your text document and paste it into Lr where needed.
On Windows Ctrl + C / V works fine.

What determines whether the Label name and/or Caption appears in the context help window but in other cases, both the label and caption appear in the context help window?

I am trying to polish an application, and find that I cannot seem to reliably control which of the label or caption text appears in the context help window because I don't understand what rules are in place to determine which should appear. It seems like if I reate a named constant, then use it's right click menu command "Create Indicator" I get a control with only a Label (as long as I don't add a caption). This then appears in the context help window as the label name followed by the description text (after entering some description text). But if I add a caption, the label name is shown in bracket
s which is a 'feature' I would like to avoid, because I have certain controls where I would like to use a descriptive variable name on the block diagram side without using so much space on the front panel. It seems like there is no way to avoid showing the Label name in the context help for a control/indicator. Is this true?
I thought the purpose of having a seperate caption was to make the text that appears with a control programmatically controllable, but if that control is not extended to what appears in the context help window, it limits the usefulness of the caption and forces me to re-consider some Label names. However, the problem goes deeper than that because then even when I make the label and caption exactly the same, or if I delete (via a select caption text-backspace or select caption text- delete key .. sequence) the caption for a control, the label name in the context help window still appears in square brackets!
Can I have complete control over the context help fo
r a particular control (or has anyone found a third-party context help solution that functions compatibly with LabVIEW 7 in a built application that they will be so kind as to recommend?)
I have used LabVIEW for three years, and I am now using LabVIEW 7.0.

Sorry for that.. I was changing the text of my question and didn't read carefully enough in the preview stage. I wanted it to read "What determines whether the Label name and/or Caption appears in the context help window?"

Tagging an image with a callout and caption

The document is created in MSWord 2013. It contains screen captured images along with added call-outs and a caption for each (see image #2 below). The call-outs extend outside the image border. I used the 'group' option in Word to group each of the elements together as they tend to move around the page during the editing process. The 'picture' group is formatted as 'inline with text' or 'top and bottom'.
In Adobe Acrobat XI Pro, I am trying to fix the tags for the figures. Although each of the elements are group in Word, they are appearing as separate elements/tags. (see image #1 below) ...the image is one Figure, the call-out is another Figure and the caption is yet another Figure. How should I handle this type of situation? I have tried:
1. to tag all three elements as a 'Figure'. Sometimes this works; sometimes the caption and/or the text in the call-out disappear.
2. to tag all three elements as a 'Figure/Caption'; however, I get the same results as above...sometimes the caption and/or text in the call-out disappear.
3. I also tagged the call-out as 'background' and then tagged the image and caption together as either 'figure' or 'figure/caption'; however, when selecting the image and caption, I must select the call-out as well because of it's proximity to the image. End result: text in call-out disappears.
What is the proper way to tag in this situation?
As an aside, I find the entering the ALT text in MSWord does not carry over to the PDF. I've experimented with the too. I've added the ALT text to the image on its own and to the group. I've added it to the "Title" field; however, the ALT text field in the PDF is empty. I've given up on adding this in Word and now add them directly to the tag.
If someone can help point me in the right direction on how to fix the tag issues for images/callouts/caption, I'd be very grateful!!!!! (BTW, using a page layout application is not an option. I must use MSWord 2013 to create my documents.)

HI 'C' student!
Thanks for the info. I will give the Content pane a try.
I think my Word 2013 might have a bug. When i enter text into either the 'title' field or the 'description' field, the text does not move over or wrap around so that i can fully see what i've entered. i wonder if this is impacting the carry-over into the pdf file?
the company I work for does not 'officially' support this version of Word, as i am an 'early adoptor' of this version. until the rest of the company moves to this version, i'm kinda on my own. i am going to see who i can speak with to see about getting an update, though. maybe that will fix the problem.
thanks again,

Foreign language fonts for iMovie title pages and captions

I would like to write title pages and captions i iMovie in the Polish language.
Typically, characters that are specific to the Polish language are entered by using the alt key and the letter that is to be accented. This doesn't seem to work in iMovie.
How can these special accented letters be entered in iMovie title pages and captions?

Typically, characters that are specific to the Polish language are entered by using the alt key and the letter that is to be accented. This doesn't seem to work in iMovie.
Did you go to system preferences/language & text/input sources and check the box for the Polish keyboard layout, and then select it in the "flag" menu at the top right of the Finder? Which key does what can be seen using Keyboard Viewer.
Try Lucida Grande if the font does not have the necessary characters.

Write Superscript/Subscript Characters in Description Field

How to Write Superscript/Subscript Characters in Description Field?

aqeeliqbal2008 wrote:
Follow following path on your windows - start all programaccessories -- system tool -- character map.Here select the font as "lucida sans UNICODE". And here you will get symbol subscript 0 to 9.Select it, copy it and paste it in SAP wherever required.
The ones I mentioned from Wikipedia and lucida sans UNICODE are unicode characters... Both have same value, for example superscript 2 ( ² ) has uni-node value of U+00B2.
If it's working it does mean your system supports unicode in longtext.

I am making a calendar in iPhoto, picking photos from a folder, let's call it "2011 Pics," in iPhoto. After arranging all the photos and captions I decided I wanted to insert a new photo -- one that was not in "2011 Pics." So I inserted it into the folder

Add new photo to existing calendar folder in iPhoto
I am making a calendar in iPhoto, picking photos from a folder, let's call it "2011 Pics," in iPhoto. After arranging all the photos and captions I decided I wanted to insert a new photo -- one that was not in "2011 Pics." So I inserted it into the folder, but the picture does not show up on the scrolling menu of pictures at the left of the calendar-making page. This happened last year and in frustration I started all over again. But surely there is a way to add a new picture to a calendar that is already laid out.

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

Report on material code, description and all unit of measure conversions

report on material code, description and all unit of measure conversions ?
any ideas?

Material Number MATNR
with this key and SPRAS (the desired Language key)
from MAKT you can get the descriptions..
and with MATNR from MARM you can get alternative UOM and the conversion rates.
If you need help on MARM how to get the conversions please notify.
Hope it helped
Please reward if found useful
Best Regards

Right-Click pop-up more than one Description and tip

Is it possible to edit the run-time popup menu for a right click on a control?
My front panel has a cluster within a cluster and the right-click popup menu gives you two different "Description and Tip" to select from. This is confusing for the user.
How do I edit the run-time right-click popup menu?

hi
search for right click, context menu etc. in this forum. there are several posted vis to create your own right-click menues and catch the selected item (some of them are really neat).
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

SharePoint 2013: Error when clicking on Title, description, and logo

Hi.
I'm in the process of upgrading from SharePoint 2007 to 2013 and have come across an error which I think has occurred since trying to deploy a new feature to implement our "Company Theme" (Custom look). Please note, everything is otherwise behaving
as expected in the new 2013 environment and the issue does not occur for site collections/content db's that are deleted and restored from the interim 2010 upgraded backup, so I am assuming its something I've done as part of deploying, retracting and redeploying
the theme feature (a number of times).
So, on to the problem... When I click on "Title, description, and logo" in Site Settings I get the following error:
"Sorry, something went wrong
A list, survey, discussion board, or document library with the specified title already exists in this web site. Please choose another title."
My research suggests there is something wrong with the masterpage, which I had initially included as part of the feature but have since gone back to using the default "seattle.master" when creating the Composed look (only spcolor and spfont are
different now).
The same error also occurs when trying to preview a composed look.
Anyway, while I can probably get away with re-upgrading the affected site collections and re-enabling the theme feature, I'd like to know if I can fix this (or rather, what caused it) before going to production.
BTW, I'm getting the following errors in the Log file:
"The list "$Resources:core,webpageassetList;" in web "..." was not created"
"Failed to create list "... etc."
(I would copy the entire error messages but its not pasting - I'll try on a reply post)
Thanks,
Paul.

The list "$Resources:core,webpageassetList;" in web "http://myteam13test" was not created. hr = 0x81020012.
Failed to create list "$Resources:core,webpageassetList;" in web "http://myteam13test", HRESULT=0x27a2abc0. List XML: "<List xmlns:ows="Microsoft SharePoint" Title="$Resources:core,shareddocuments_Title_15;" Direction="$Resources:core,Direction;" Url="Shared Documents" BaseType="1"/>"
Failed to instantiate list 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\Features\DocumentLibrary\doclib'
A list, survey, discussion board, or document library with the specified title already exists in this Web site. Please choose another title.

How to display name of the table and the description and the table type

Hi,
Can you people tell me how to display the name of the table and the description and the table type (View, structure, etc...) used in the program.
I want to display in a list.
Kind Regards

use this program
TABLES : TSTC, tstct.
TABLES : DD03l, DD02l.
DATA : Program like sy-repid.
DATA : BEGIN OF I_FINAL OCCURS 0,
tabname LIKE dd02l-tabname,
TABCLASS LIKE dd02l-tabCLASS,
TEXT LIKE DD02T-DDTEXT,
END OF I_FINAL.
DATA : BEGIN of ITAB Occurs 0,
name like dd02l-tabname,
END OF ITAB.
DATA : TCD(100) TYPE C.
DATA : var1 LIKE dd02l-tabname.
DATA : DESC LIKE TSTCT-TTEXT.
selection-screen skip.
SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : r1 RADIOBUTTON GROUP r DEFAULT 'X'.
Parameters : Tcode like sy-tcode.
selection-screen skip.
PARAMETERS : r2 RADIOBUTTON GROUP r.
Parameters : Prog like sy-repid.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options : Type for dd02l-tabclass .
SELECTION-SCREEN END OF BLOCK B1 .
at selection-screen.
if r1 = 'X' and Tcode is initial.
message e001(00) with 'Enter Transaction Code' .
elseif r2 = 'X' and Prog is initial.
message e001(00) with 'Enter Program Name' .
endif.
START-OF-SELECTION.
if r1 = 'X'.
Prog = ' '.
select single * from TSTC where tcode = tcode.
if sy-subrc = 0.
program = TSTC-PGMNA.
select single TTEXT from tstct into desc where tcode = tcode and SPRSL = 'E'.
else.
Write :/ 'Invalid Transaction Code'.
exit.
endif.
elseif r2 = 'X'.
Tcode = ' '.
program = Prog.
endif.
CALL FUNCTION 'GET_TABLES'
EXPORTING
PROGNAME = Program
TABLES
TABLES_TAB = itab.
if itab is initial.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
ELSE.
PERFORM : categorize.
endif.
END-OF-SELECTION.
LOOP AT I_FINAL.
WRITE :/4 I_FINAL-tabname COLOR 2 INTENSIFIED OFF NO-GAP HOTSPOT ON, 35 I_FINAL-TABCLASS COLOR 2 INTENSIFIED OFF NO-GAP,
50 I_FINAL-TEXT COLOR 2 INTENSIFIED OFF NO-GAP.
ENDLOOP.
AT LINE-SELECTION.
TCD = SY-LISEL.
var1 = TCD+3(30).
set parameter id 'DTB' FIELD VAR1.
call transaction 'SE11' and skip first screen.
TOP-OF-PAGE.
WRITE :/45 'TABLE DETAILS RELATED TO THE TRANSACTION CODE' COLOR 7 .
WRITE :/2 'DATE : ' COLOR 1, SY-DATUM COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TRANSACTION CODE : ' COLOR 1, Tcode COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TCODE DESCRIPTION : ' COLOR 1, desc COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'PROGRAM NAME : ' COLOR 1, PROGRAM COLOR 1 INTENSIFIED OFF NO-GAP.
SKIP 1.
WRITE :/1(140) SY-ULINE.
WRITE :/4 'TABLE NAME' COLOR 5 INTENSIFIED OFF NO-GAP,35 'TABLE TYPE' COLOR 5 INTENSIFIED OFF NO-GAP,
55 'DESCRIPTION' COLOR 5 INTENSIFIED OFF NO-GAP.
WRITE :/1(140) SY-ULINE.
*& Form categorize
text
--> p1 text
<-- p2 text
FORM categorize .
SELECT dd02ltabname dd02ltabCLASS DD02T~DDTEXT
FROM dd02l INNER JOIN DD02T ON dd02ltabname = dd02Ttabname
INTO TABLE I_FINAL
FOR ALL ENTRIES IN itab
WHERE DD02L~TABNAME = ITAB-NAME AND TABCLASS IN TYPE AND DDLANGUAGE = 'E'.
if sy-subrc <> 0.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
endif.

Given filename or path contains Unicode or double-byte characters.Retry using ASCII characters for filename and path What does this mean? it happen when I publish an OAM

Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?

No, my file name is mainContent.oam
My project name is mainContent.an
This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
On a MacPro, 10.7.
Are you an Adobe person or just a nice helper?

Ibooks author inspection widget: grayed-out title and caption options when object is selected

I'm trying to add titles or captions to photos in an iBooks Author project. I select the photo, click on Inspector and Widget, then Layout. The only active option on Layout is the Accessibility Notes. Is this a bug? What am I missing?

Right.
You can create text boxes next to an image for title and caption, but otherwise, those are attributes for a widget with media.

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

Romanian characters in Description and captions

Similar Messages

Maybe you are looking for