Romote controll button activation - Please

Could someone help me and tell me how to allow the remote control buttons
to function for a DVD I have created I can not figure out how to connect them through the connections pane. any help is very much appreciated!

Many of the buttons have default settings which can't be changed. However, you can alter the menu call, Title menu call and return button (if it exists on your handset).
Click on the disc icon in outline view, then look in the property inspector - you will see the drop down settings boxes for the remote control there - these are the overarching settings which would govern the entire disc behaviour for these buttons.
However, you can over ride the disc settings within an individual track. Click on the track in outline view and check the property inspector again. You may see the remote settings set to 'Same as Disc' - they have inherited the disc level settings. You can simply change these to what you want for each track, story or slideshow.
There are other settings which you can use, called User Operations. These govern fine detail in the playback and use of the remote control, and are generally left alone unless you know what they are doing. You can, for example, disable the handset button for fast forward, or disable the menu button completely for a particular track - such as an intro FBI warning - so that the viewer has to watch it. You can also disable or enable a whole raft of other controls in there as well... use with caution!
Finally, you need to be aware of how the buttons actually respond when you are in different locations on your DvD. For example, if you play a track and use the menu button, you will go to a menu. If you press the menu button again when you get there, you go back to the track (it acts like a resume function). This is all normal and yet causes so much grief when people expect it to take them up through the menu hierarchy. The Title button will take you to the first menu on your disc from pretty much anywhere (unless it is disabled). The return button is designed to move you through the menu hierarchies, but there are limitations on its use.
The other buttons generally can't be trapped and made to perform anything other than their default actions as defined by the DVD Spec.

Similar Messages

Trouble getting banner rotator control buttons to line up. Please help!

Hi guys,
I had some help making a banner rotator and it all works fine but I can't get the control buttons to line up with each other properly.
You can check my example by clicking here.
Basically the left and right control arrows should align with the lights. Does anyone know how I can get them to line up?
Thank you,
S

Spindrift wrote:
I tried what you said and it kind of worked but I more want to bring the <ul> up to the level of the arrows, rather than giving the arrows a top margin to bring them down, if that makes sense. I want the black box to be a thin strip.
Any other ideas?
Add margin: 0; to your 'banner-rotation ul' css selector (as shown below)
.banner-rotation ul {
 float: left;
 padding: 1px 0 0;
 width: 148px;
height:11px;
margin: 0;

Mousepad/touchpad problem control button activates

Hi,
Just bought a pavilion g6 and i have a problem with the touch pad. when moving the cursor around the screen the control button seems to suddenly activate.
for example the "find your cursor when pressing control" function kicks in and a circle highlights the location of the cursor on the screen
or even worse the webpage will zoom in and out as if I held the control button and swiped up or down with the touchpad page scroll option.
I am not using the mouse pad in any weird way. eg just using one (slender) finger. I cant find any reference to this being a known problem but i am checking here before leaving my laptop back.
is there meant to be some in built touchpad function that causes the control button to be able to be activated from the touchpad? If so can i disactivate it?
regards,
d500b
This question was solved.
View Solution.

Hi
Please find the link givenbelow might help you to resolve your issue.
Using and Configuring the Touch Pad
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

IPod Shuffle 4th Generation's control buttons not working.

My iPod Shuffle 4th Generation's control buttons are not working. Sometimes it works after formatting it stopped again.. Please give a solution ASAP...

Hello.. When I switch on the iPod Green light appears. after 10 - 15 secs 3 times orange light blinks... After that I wont be able to increase / decrease the volume nor change the song. If I need to change the song, I should switch off n switch it on back. Actually I washed the iPod. It was in my jeans pocket.. Put in the washing maching without knowing that iPod was in the pocket. Charge also not staying long...
**Warranty is there for the iPod. Unfortunately it has two dents, so its not eligible for the replacement..

How to keep the save-button active all the time?

Hi!
I'm using mobile sales 4.0.
On a tile i've only fixed questions and combo boxes with yes and no ...
When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
What are the settings i've to do to keep the save-button active all the time?
Thanks a lot in advance.
Best regards,
Ingo

Hi Ingo,
If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
In the combobox_OnValueChanged2 event, make a call to makeDirty method in the tile:
If boundAttributeChanged Then
anchorthatyourcombotiedto.bo.MakeDirty True
End If
This will make the Save button enabled.
Regards, Vadim.

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I break a for loop (inside) and a while loop (outside) at the same time by a control button

I have a while loop (outside) and a for loop (inside) and a control button within the for loop. I want to stop the program by click the botton without finishing the for loop. How can I do that?
Thank you in advance.

HI Please find attached snapshot Regards, Santosh
Message Edited by SanRac on 12-17-2009 05:12 AM
Message Edited by SanRac on 12-17-2009 05:13 AM
Attachments:
Snap1.png ‏4 KB

Help...Brightness control button in Lenovo All In One C360-4061 not working

Hi,
I just bought All in one C360-4061, and the monitor very birght,it hurts my eyes...i tried to push the birghtness control button but not working.i tried the keyboard shortcut (fn+home and fn+end) but not working either.
anyone can help how to solve it ???
thanx
best regards
Solved!
Go to Solution.

hi esurjopurwanto,
Welcome to Lenovo Community Forums!
Open device Manager and look under Display adapters.
Uninstall the Intel HD graphics place a check under delete driver software for this device.
Then Download and install this driver for your Windows 8.1
Intel VGA Driver
Please let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Re: Satellite A305-S6872 media control buttons driver?

Ok, so I just got this laptop on Sunday.
It has the media control buttons on it, but they won't work.
I've read a few posts about it, saying that I need to download the Control driver..
Well, I spent hours last night looking for it. :\
Anyone have the direct link to it?

Hallo Kitsune
Try to reinstall Value added Package. You can download it from Toshiba support page. If you have US notebook model please visit http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
Hallo Glead
In users manuals is described that this button is not for 2 functions but just for one. Either for MUTE or for enabling/disabling the LEDs. I have Satellite A300 too and this button is for disabling LEDs only.
Have a look into this symbol and you will see it is not speaker but symbol for light.
Compare it with symbol on ESC button and you will see it is not the same.

Cannot operate youtube videos in Firefox. Cannot use play, pause, volume, or any of the control buttons.

None of the control buttons work, it's as if the darn video window is part of the backgroun.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Button Activation Sequence.

Hi Everyone,
I am creating a program which controls a voice coil controller. In the program, I have a series of buttons that need to be pressed in a specific order, in order for the controller to operate correctly. Various users will be using this program so it's imperative that they are used in the correct order to prevent controller malfunction. I was wondering if there was a way, for when the program starts, all of the buttons except one be disabled. Once that first button is clicked, a second one becomes enabled, and so on.. until they all have been clicked in the right order. Finally, when a stop or reset button is clicked, the initial state of only one button active becomes true. I have attached the project if anyone would like to view the GUI. "Updated GUI Fretter" is the program and the "Test Control" tab is the one I am referring to. I'd initially like the "Download Program" button to be active, then once that is clicked, "set home position" becomes available for use, and so on to the right.
Any ideas or suggestions on how to make this function are greatly appreciated.
Attachments:
UPDATED GUI Fretter.vi ‏63 KB

I take it back. Event structure is just what you need:
Attachments:
buttons.vi ‏15 KB

Batch Master Classification View - Inconsistent button active

Hi
We are encountering a problem of the Inconsistent button getting active in the Batch Master Classification tab (Material is batch controlled). We know the reason why this is getting active : Due to a wrong inbound value for a field called 'Sterilization Site' in the classification data (data element: ATWRT) through an interface from a legacy system.
We also know the solution to get around this: Go into the batch master in edit mode and delete the inconsistency by clicking on the Inconsistent button and then the delete button on the pop-up screen which gives the inconsistent value.
My requirement is: How do we identify all the 'inconsistent' batches in the system? Is there a way to identify a batch having an inconsistent characteristic value? (inconsistent value => value not existing in the allowed list of values for the particular characteristic)
When I try to do a F1 on the 'inconsistent' button, I get a help screen giving "Program: SAPLCHRG; Function: VCON".
Thanks
Chandra

Steve,
You have given me the right solution, but in this one particular case that I am tracking, I think there is an aberration.
I've got an output of all batches by using the option 'Show Incomplete Status' in CL2A. But this particular batch has the 'Inconsistent' button active, yet the classification status is showing as 'Released'
Any idea how to deal with such batches and extract this information?
Regards
Chandra

Media control button isn't ON - Satellite P305D-S8828

I reformat my laptop and didn't save the drivers (boohoo!).
I can't use the touchpad and tried installing both Alps and Synaptic but neither works.
Another problem is that the Media Control Buttons (located beside the Power Button) are not lit.
I use the Media Buttons yesterday but when I turn the laptop on today, it wasn't lit.
Please help! I don' know what to do anymore...
Message was edited by: mhylz

Hi
You could try to setup the multimedia button using the TOSHIBA Button Support.
The application in +Program Files\Toshiba\TBS\Backlight.exe+ controls the illumination
Check these threads for more details:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=150879
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=145425

VC FORM CONTROL BUTTONS

how can we enable the fields without touching the Control Buttons on the form Tool bar?
CE 7.2 I am getting a problem in VC form where only if I click on "Enable" button the controls like date, input field, checkbox are getting enabled else all are disabled , any idea why this problem?

Hi,
This is probably because the form is connected to a node of cardinality 0..1 (for example in a service input or output). If you want it to always be enabled you can add a record to the form with the Initialize Data button of the element the form is connected to. You could also change the node to be of 1..1 cardinality.
Please note that if the form data is then sent to a service, the service should be aware that it will always receive a record (for example if it checks if any data was sent).
best regards,
Tal.

Power button and voice control buttons won't work on my macbook pro retina

I found that my power and voice control buttons won't work on my new Macbook pro retina. I can't shut it down or restart it in any way. And Im afraid if I force to shut it down I can't turn on it cuz the power button won't work. What should I do? Any idea???

Please read this whole message before doing anything.
Back up all data.
Quit Facetime and Messages if either is running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following item from the Library folder to the Trash (either may not exist):
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try the applications again. If they work now, stop here. Close the Library folder.
Step 2
If you still have problems, quit again. In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.imdsmsrecordstore
com.apple.imservice
Move them all to the Trash. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash too.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again.

Romote controll button activation - Please

Similar Messages

Maybe you are looking for