Room directory overview lost after upgrade to stack 12

Hi,
after upgrading to stack 12 I can't see the created rooms anymore.
Under collaboration > room directoy I see that there are 5 rooms cause there are 5 lines but the room names I can't see anymore.
Consequently I can't access the rooms anymore.
What's going wrong? Can anybody help me?
Thanks
Susanne

Hi Gilles,
thanks, the note solved a part of the problems.
Now I can see the rooms in the directory and I can create new one. But if I access into an old room I see only empty content and an empty navigation panel.
New created rooms have no problems. Do you have the same
problem?
Also I can't delete the test rooms again.

Similar Messages

How can I recover all my MAIL emails lost after upgrading to TIGER?

Hello,
I just bought Mac OSX Tiger today and after upgrading from the previous Mac OSX and after launching Mail, I discovered that all my INBOX emails were LOST!!!
I still have the Draft emails, the Sent emails and Trash but no trace of my 1,425 ancient and precious INBOX emails!
Please help me recover them. I tried lots of ways to get them back but cannot find them. I'd like to also understand what happened.
Thank you!
iBookG4

HI Greta, Did you Clean Install Tiger, or Upgrade from a previous OS? as if the latter, you might find them in the ARchived files.
I upgraded to Tiger in December and it caused problems with mail but I didnt lose the messages. So I am thinking you did a clean install.
Post back with more info please
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.3) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.3) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1

GMAIL Lost after upgrade to IOS 8.3

I have lost access to my GMAIL accounts after upgrading to IOS 8.3 !
IOS Settings does not provide me a way to enter a new application password for the account - there is NO PASSWORD box displayed anywhere in the GMAIL configuration. So I tried deleting the account and re-adding it but i get stuck in an endless loop of two-step confirmation and it "appears" to add the account (prompts me for which features - mail, notes, calendar, etc.) but then when all is said and done NO GMAIL ACCOUNT shows up in my list of accounts. WTH?
And trying to navigate Apple's support screens has become an exercise in frustration and futility!
Anyone got any ideas how to fix this mess?

Just wanted to add to this thread. I found out that this might be related to using the iCloud Keychain on iOS and with a computer using Mac OS X. Due to how iCloud Keychain stores all passwords across all synced devices, which can be both iOS devices and Mac OS X computers, the methods for accessing and updating those passwords has changed. Not sure whether this is intentional by Apple or not, but it seems that the ability to update passwords stored in iCloud Keychain is not something you can do through iOS (or at least, I have not been able to find a way to access the keychain and view/update any of the passwords stored there).
If you have a computer set up to use iCloud Keychain, you can use the Keychain.app to view/modify any passwords that are stored there, which "should" update the passwords stored on the iOS device, if that keychain item is actually synced to the iCloud Keychain. (Tested this and confirmed)
The problem appears to arise specifically if you only have one iOS device (or only have iOS devices) using iCloud Keychain. The option to update passwords seems to be missing. Not sure it this is new to 8.3, but this is the first time I have run into this problem, and cannot seem to find any reports detailing this problem anywhere else. In fact, to a greater degree, most articles/sites that discuss the iCloud Keychain only refer to the usernames and passwords stored by Safari, which are not the only passwords and information stored by the iCloud Keychain. This issue being a prime example.
I did notice that when re-adding my gmail account using my iPhone, the login page was actually just a webkit presentation of the gmail login page (webkit being the underpinnings of Safari, used for displaying HTML, but not actually the full app or Safari), which is where I entered my username and password, which I am assuming is now stored in my iCloud Keychain. I even checked in Settings>Safari>Passwords&Autofill>Saved Passwords, and my gmail username and password are NOT listed there, so iCloud Keychain is storing some items somewhere else, which is not accessible by the end user through the UI.

All data lost after upgrading

I lost all data after upgrading my iPhone 3G to iOS4. I was able to recover only the information that syncs with mobileme, everything else was gone, in all apps: bank accounts, passwords, notes, games, settings, etc -everything
I already restored and restarted, even used time machine, nothing seems to work. Any help?

I am trying to update to the newest software, and get a warning that i need to save/transfer new purchases to my library. I know the last time i did this update i went with continue, and as the others in the posting have indicated lost information. It didnt matter to me at that time, but now that I have more info to lose, i dont want to do it, so the other option on it is to do as it asks. But, I am having a hard time doing that. I have done what they have asked by going to file and transferring, but, it doesnt seem to be working. As i continue to get the same warning. I am not going to update this till i get the answer to do it properly this time. But, want to know why it doesnt want to transfer the info that it requires, for me to continue on. I think this is why the others in the thread are losing their info.

Attached documents lost after upgrade to iCal 4.0.4

Attached documents lost in iCal after upgrade to iCal 4.0.4; I used to scan documents (written invitations etc.) and attach them to the iCal event. Can I restore them or are they lost forever?

I have exactly the same problem. Came to add a scanned letter to an appointment, and found a) there's nowhere to put it and b) my appointments with similar attached files are now file-less. Where are they? Anyone know?

Airport connections lost after upgrade to Snow Leopard

After upgrading to Snow Leopard, I am no longer able to connect to the Internet wirelessly. I have had to resort to connect via wired connection. I have tried to reconfigure the connection. It finds my wireless network, but when I type in my password it says it is not correct. I know it is an issue with Snow Leopard as it worked fine prior to the upgrade and my other devices connect with no problem.

Go into Displays Preferences and, if you haven't already done so previously, put a checkmark in the box for "Show displays in menu bar". Then, click on the resulting icon that shows up in the menu bar to drop the menu and select "Number of Recent Items" and set it to 10. Now drop the menu a second time and see if there are two 1920 x 1080 resolutions. If so, one of them may be the older one previously in use that was working.

IWorks documents lost after upgrading to ios8

How can i get my iWorks documents after upgrading to ios8?

Other than the fact that you cannot connect to WiFi, we have no idea what you have tried, so see if something in ether of these support articles helps.
http://www.techradar.com/us/news/phone-and-communications/mobile-phones/ios-8-wi fi-battery-drain-fix-problems-1266599
iOS: Troubleshooting Wi-Fi networks and connections

Mutli-room dvr stopped working after upgrade to 500 gb dvr

I've been running in circle with the online chats. I upgraded my dvr and since then my remote dvr and mutli room dvr will only work for a few mins after resetting the boxes:
I've done the start the boxes, factory reset of the router and took the coax off and back on.
any help I'm starting to frustrated by all the running around and time I'm spending on my own time
Any other suggestions

Hello lyndi742,
We were able to resolve this issue for you. We are going to close your private support case. Please let us know if there is anything else we can do to help!
Thank you and Happy Independence Day!
-Rachel

Boot camp lost after upgrading to Yosemite from mountain lion

I lost my windows7 boot camp after I upgrade to Yosemite from mountain lion. When I press ALT when rebooting there is no more alternative to boot for window anymore. I did read some thread about this but my case is different since when I tried to type 3 steps(diskutil.......etc) as LonerT user answers it did not work. The attached files here are what I faced with. Please help. I have a lot of important files in windows

If you look at the GAP between GPT3 and GPT4 it is start/size of 782929176/37595880 but the NTFS header starts at 782929920 according to your Testdisk output shown here.
MS Data                782929920 976773112 193843193
The difference is 782929920 - 782929176 = 744 bytes. You will need to delete the current GPT4 and recreate a new GPT4. Please stop if you see any error messages and post here.
1. Delete the old entry and create a new entry at GPT#4.
sudo gdisk /dev/disk0
p
d
4
n
4
782929920
976773112
0700
p
w
y
Here is an example of the delete/new...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI System Partition
   2          409640      1452940543   692.6 GiB   AF00 Customer
   3      1452940544      1454210079   619.9 MiB   AB00 Recovery HD
   4      1454211072      1954209791   238.4 GiB   0700 Microsoft basic data
2. This is a tedious process and you want to check after the second 'p'rint command that it looks reasonable, before the 'w'rite and 'y'es to confirm.
3. You will need to reboot after the change, because the disk you are booted from is the one being modified. Reboot will rebuild disk0s4 using the start/end you entered.
4. Run the dd command - sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C and check that the first line contains "R.NTFS".
5. Once you have a working GPT#4, a new hybrid MBR needs to be created which will overwrite what you see in your Fdisk output. This is also done using GPT Fdisk (Gdisk). Your numbers will look different than what are in the following example. In most cases, you will use the default except entry 4, which should have a 'y' for bootable flag.
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 490234752 sectors, 233.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 59BDFEEB-1EB4-4529-94FE-3CBC2C3CD513
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 490234718
Partitions will be aligned on 8-sector boundaries
Total free space is 2604 sectors (1.3 MiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EF
   2          409640       401060383   191.0 GiB   AF05 Macintosh HD
   3       401060384       402329919   619.9 MiB   AB00 Re
   4       402331648       490233848   41.9 GiB    0700 Microsoft basic data
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 2 3 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
6. a. Test 1 - Can you see your Bootcamp volume in Finder.
    b. Test 2 - Can you files in the Bootcamp volume?
    c. Test 3 - Can you see Bootcamp in your System Preferences -> Startup Disk.
    d. Test 4 - If Test 1-3 are successful, select Bootcamp and click on Restart. You may need Windows startup repair, if you see a hanging underline cursor at the top left corner of your screen. In most cases, it is not required.
Here is an example...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI System Partition
   2          409640      1452940543   692.6 GiB   AF00 Customer
   3      1452940544      1454210079   619.9 MiB   AB00 Recovery HD
   4      1454211072      1954209791   238.4 GiB   0700 Microsoft basic data

LR4: tone curve settings lost after upgrade

I've find an annoying bug in this new version that makes me really crazy.
I've a Nikon D300S and a D7000.
After the importation of the catalog in the new Lightroom 4 all the D7000 .dng files have lost all the tone curve settings (I normally use linear).
The D300S files instead retain the tone curve settings.
It's a very strange behaviour: I've lost more than half of my old photo settings.
It's really frustrating.
Will be resolve soon this problem?
Until that day, for my older works I'll be obliged to continue to use LR3.

I've probably found a sort of workaround!
I've made some "organized" tests and here I report my findings.
Using LR3.5, I prepared a "test catalog" using 4 images from 7 different cameras (28 images total): for each of them, I used both the original nef and the dng converted file (56 files in the catalog), all develop process was set to "2010".
The cameras were Nikon D70, D90, D200, D300s, D700, D5000, D7000.
I applied a strong tone curve to each image in a way that the appearance was heavily characterized.
Before exit LR3.5, I SAVED ALL THE METADATA TO THE FILES.
Opening and converting the catalog using LR4, doesn't show any visual change until I zoom in library or open the develop module: both these operation lead to a flat image with the strong tone curve lost.
Curiously, the history retains the original steps but they are ineffective: histogram and tone curve changes according to the visual change but for some camera the "new" tone curve is "medium contrast", for others (D5000, D90) is "linear", for D300s is "custom" (linear with blacks cut at 9.8%, and this explain my initial impression that D300s's curves were untouched, sorry). This last behavior may depend on the fact that I've different default develop settings depending on the camera serial number.
Finally, the update to the 2012 process only minimally changes the visual appearance and surely doesn't restore the lost tone curves.
And here is the UNEXPECTED WORKAROUND: doing a READ METADATA FROM FILES IT RESTORES THE TONE CURVES (and the 2010 process)! Upgrading the process to 2012 minimally changes the visual appearance again but now the strong tone curve is present and evident.

Volume lost after upgrading

I've created a directory /Volumes/HD2/ and after the upgrade to Snow Leopard, the complete directory is gone. Has anybody experienced the same?
Is the volume completely gone or is it just not mounted?
Desperate man.

Guys see my thread - https://discussions.apple.com/thread/5493304
For those of you who are using Apogee Duet (Firewire or USB) and just UPDATED to Maverics - DONT INSTALL NEW APOGEE DRIVERS!
The reason is - once you install new driver, software volume control keys (on your keyboard) wont work! You will have to use DUET's knob which is not always confortable.
There is no fix for this yet and maybe wont be, because of Apogee "great" costumer support - (such problems with DUET first appeared in Lion)
If your drivers from Mountain Lion (or older) works fine, dont update it or reinstall it. You will be unable to install previous version in Mavericks.
If you're the one who installed fresh copy of Mavericks from USB Flash, i dont think there is a way to fix the problem. One thing that i didnt try was using Pacifist to force replace driver files.
Hope this message was helpful
Seems like this problem appears not only on Duet, but on al Apogee products.. =(

Many functions lost after upgrading to OS5 on iPhone 3GS

Recently, I've upgraded my OS for my iPhone 3GS to OS5 version, and many of the useful, or rather basic function on the default iphone apps are gone.
For example, firstly, the symbol in the calendar app is missing, and I could no longer add an event or activities when I open the calendar overview application. Although, there is a new app called "Reminders" which came with the new OS5 version, I could only input one alert reminder, which in the past I could create two alerts to alert me twice (different day/time count-down) for the coming event activity.
Second, the "Contacts" application. Likewise, same issue with that of the calendar app, the symbol too was missing and no longer available to add new contacts. I have to open up the "Phone" app, and had go onto the recent calls tab to create a new contact. Another added bug for the "Contact" application, is that when I select on any of my contact in the phonebook, the "Edit" is no longer available too. It used to have it there...now I can't edit anything or add any further information of a particular contact, not to mention delete/ remove it too.
Third, I heard the new OS5 is able to allow 3GS iPhones to function/ act as a router for internet tethering when personal hotspot is turned on. But it seemed like, it only works on iPhone 4 and above.
Fourth, I used to be able to set to manual synch whenever I plug my phone to my comp, but I can no longer do so as the iTunes does not automatically open when I plug my iPhone into my comp. I had to tick the "open iTunes when iPhone is connected", but it automatically synch my phone and backup the data when I wanted to manually choose to do it like before selecting through the "File" in the top menu.
So far, these are the major basic problems I've encountered. Would Apple please dedug and resolve these problem ASAP??? I am getting pretty impatient after have feedback to Apple since 3 weeks ago after the upgrade, yet no new OS updates is been available to resolve the bugs..
"Disappointed iPhone user..."

valenceparadigm wrote:
The question I have is; "WHY does this work?"
How about it Apple "Gurus"
Well, it would seem that the issue here is that iOS4 is not properly reading the backup that was created before the update. Or the backup is not being created in a properly formatted manner. There are just too many cases of a post upgrade issue being solved by restoring as a new phone for it not to be bad data.
Pain in the hiney, I know. And this is nothing new. All the way back through the iPhone's iPod roots, there has alway been a point in the troubleshooting tree that comes down to "restore the iPod". Just a more awkward thing now that the iPod has evolved into a phone and is trying to keep any number of settings straight. Not to mention no one wants to take their phone down unless there is no other option.

IPod music lost after upgrading to iOS 8.3

I own a 5th generation iPod touch. When I connected to my computer the iTunes prompted me to update to the latest iOS available i.e., 8.3 and I accepted it. In the process it downloaded the software and restarted my iPod but somewhere in that process I got a prompt in iTunes stating a Unknown error occurred. I verified the iPod to see if the device is up and running. It showed the latest OS version 8.3 but to my dismay there were no music albums at all. All the songs which I had in the iPod prior to the upgrade were vanished.
I tried the restore option in iTunes which was backed-up just before the upgrade (automatically by the upgrade process), but looks like it only restores contacts, calendars etc but not the music.
When I connect my iPod to the computer it sometimes shows the space usage as if the music prior to the upgrade is still in the iPod. Even the Songs and other information are still shown in both the iPod & the iTunes. But when I play it will show exclamation mark against that file in iTunes and in iPod it just keeps skipping to the next song and nothing gets played as there are no songs at all.
Please let me know if there is any solution for this weird loss of data from iPod.

First get the songs to play in iTunes on the computer. Re Import CD music to iTunes or redownload iTunes purchases
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Then
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

PDF presets are lost after upgrade to CS6 and uninstallation CS4

Since upgrading to CS6 from CS4 and subsequently uninstalling CS4 (and CS3) - as advised by IT - I have lost the presets I had when I export to pdf from Illustrator & Indesign - the drop down menu options of PRESS QUALITY, HIGH QUALITY and SMALLEST FILE SIZE have gone.
I have a back up of CS4's settings but no idea which one I need and what to do with it in order to reinstate these options.
Any ideas?
Thanks so much

You simply would have to copy the presets into the folder:
C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Settings
I'd be careful, though. Overwriting default presets with an older version may cause compatibilty issues.
Mylenium

Music, photos, and apps lost after upgrading on new computer

Someone please help! I just upgraded 3G to 3.1.3 on new computer and lost all my music, photos, and apps. Is there anyway I can get them back. I backed up my phone before the upgrade, the phone was wiped clean, then retored to original settings, then it restored to back up, but I lost all the above in the process. Thanks Sheila

By design, the iPhone syncs iTunes-managed media content (music, videos, apps, photos) with _one and only one_ computer. That content was erased from the phone. The backup won't help - iTunes content is not backed up. You need to sync to the computer you synced to +prior to+ upgrading (the 'old computer'). Or, move your iTunes library, etc., from the old computer to the new computer and sync to that.

Room directory overview lost after upgrade to stack 12

Similar Messages

Maybe you are looking for