Room list slow loading .....

Hi SDNs,
It take about 1 minutes until we can see the room list in the portal ...
the rest of the pages are working fine .
what can be the problem ?
Thanks in advance,
Hadar

Hi Hadar,
there was a bug in the Room list iview which made it unbearable slow.
Try to get the newest patch of KM.
Regards,
Kai unewisse

Similar Messages

  • SQL Developer 1.5.3 - Slow loading of Table list - expanding tables in tree

    In SQL Developer 1.5.3, I've noticed that loading the list of tables is very slow - like REALY slow
    If I log into the same schema using previous release 1.1.2.25, the same table list is loaded almost instantly.
    Gone back to 1.1.2.25 because of this pain

    according to TheFurryOne...
    There is a known problem with the performance of the tables node on the connection navigator in SQL Developer 1.5.3
    Here is a thread that discusses it...links:Re: Still experienceing problems "tables" node performance

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • Slow load times on AU sites?

    is anyone still experiencing slow load times on AU sites, apparently this is resolved but I just emptied my cache and checked load times on half dozen sites. Still very slow!

    I just loaded http://www.prettypollution.com.au/ and it took 17sec.
    Got similar time for http://www.designexperts.com.au/ as well. So, although not very fast it's much better than what you’re seeing. Could be something in the node you’re being routed through.

  • Boot message: problem with hard drive detected. Slow loading of windows 7

    Good Day
    I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
    the messsage says hard drive failure imminent you should back up you data etc.
    My specs are:
    Intel core 2 duo e8400 3.0 ghz
    4 gig ddr3 transcend
    1 tb seagate 7200.12
    giga byte nvidia 9800 gt 1 gig ddr3
    Please help lots of data.

    Another option:
    Take your hard drive out and slave it into another KNOWN WORKING PC.
    Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
    Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
    MCSE: 6771498

  • IMac - Slow load and wifi problems

    I have lion installed on my macbook pro and on my iMac. My macbook pro works GREAT...no problems. My iMac - I am ready to toss out a window. Here are the problems:
    INCREDIBLY slow boot up time - 5-10 minutes from off - 5-8 minutes from sleep
    The hard drive is constantly working. I can have nothing open and it sounds like the hard drive is constantly spinning
    Half the time my wifi hardware is not found on boot up and I have to reboot with slow load times - sometimes taking 20 minutes before I can get logged in to a 'working' computer
    A lot of my programs have become slow. Safari can be slow responsive but others that are not apple that have done 'lion updates'
    I have my activity monitor running and nothing seems to be hogging resources. My iMac specs are:
    2.8 intel core i5
    12 gb ram
    2 TB hard drive with about 1tb free
    I ran the lion update that came out and it did not seem to do much for me.
    Anyone have a solution? Anyone tried a clean format and did this work? Lion works great on my laptop and I just need it to work on my main computer as well.
    Reba

    i think part of the boot up time issue is the amount of windows you happen to have open when you put it to sleep
    other is lion upgrade slows it down due to this auto save function
    my wifi is also spotty and acts like it can't find itself at times
    and this is a brand new imac

  • How do i backup the list of load images automatically exceptions under Options- Content. I want to transfer to another comp without re-adding one at a time

    How do i backup the list of load images automatically exceptions under Options->Content. I want to transfer to another comp without re-adding one at a time. EVen if there is no way to backup, what is the system file for Firefox that stores these, so i can transfer this file or open it in an XML or similar editor to copy them out?

    The permissions.sqlite file stores 'allow' and 'block' exceptions for cookies, images, pop-up windows, and extensions (software) installation.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again.

    Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again. What do I do so no need to keep having to move cursor?THE DOWNLOADING ICON STOPS MOVING UNLESS I KEEP MOVING THE CURSOR AROUND.

    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • No "Show a Room List" dropdown, when creating a new meeting in outlook 2013

    In Outlook 2013, user clicks "New Meeting" on the right you have the Room Finder. It shows the calendar, below that the Good, Fair and Poor labels, then below that you have the drop down box "Show a room list"
    For one user there is no "Show a room list" no dropdown box at all just a grey space. They can see everything else like normal, the labels and the choose an available room...however no "Show a room list" to be able to pick one. 
    *Requesting a screen shot from user
    Thanks, 
    Will 

    Hi Will,
    If the issue only happens to one user, please check whether the issue happens in Outlook Online mode. If the issue doesn’t happen in Online mode, please create a new Outlook Profile to check whether the issue persists.
    If the issue persists in Online mode, please setup this problematic user’s account in another worked Outlook client machine, then check whether the issue can be reproduced.
    Please start your problematic Outlook client in safe mode to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Slow loading on website

    I am new to Quicktime Pro, but have found it very easy to use with great quality results endoding my FC files for the web. My problem is that when a user clicks to open my video sample, the file has a very slow load time. Some specifics:
    input file: 1.8 GB file exported from FCE as uncompressed 8-bit
    output file: in QTPro - encoded with H.264, 15 fps, 100 key frame, 800 kbps, set for streaming (fast start), 640X480, deinterlacing checked. file size 8 MB.
    As I said, the quality is great (except that the deinterlacing filter doesn't seem to do anything), but the playback outpaces the load very quickly. It takes almost 2-3 minutes for the file to be ready to start automatically. I've been told that an 800 kbps file should load in a few seconds.
    Is there anything you could tell me to enhance the load time? I'm wondering if I'm missing a simple step since QT has been so easy to start to use.
    Thanks so much for your help!! Jo

    Nothing at all wrong with your QuickTime file but your html code at http://aftglow.com/ directly links to it rather than calling the quickTime browser plug-in.
    That may be the source of your troubles. You need to use special html page code for QuickTime:
    http://developer.apple.com/internet/ieembedprep.html

  • Website slow loading

    So I am having a problem with one website that I frequent. It it much slower loading than other websites I visit. The progress bar seems to freeze for several seconds. Sometimes if I hit the x then the reload symbol the page loads right away. I have asked other people, it is a forum site, if they have had problems lately and nobody has experienced the slow loading problem I have. One person suggested clearing the history which I did. That didn't work so I researched the web and found a suggestion to delete the cache from the library and also clear history. I did that as well and nothing has improved. It only happens on this one site and has only started happening in the last two maybe three weeks.
    Any suggestions on what else I could try? I do not want to use another browser to see if it works in another browser. It used to work fine but doesn't now. Just looking for other things I could try to resolve the issue.

    Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
    Test. After testing, restart as usual and post the results.

  • Slow loading website

    So I just finished my website but it loads piece by piece and
    a slower than I would have liked. is there anyway to improve this
    that would not require me redoing it all over? The site is here:
    http://www.martinpaulphotography.com/index.html
    thanks,
    Martin.

    A couple of things:
    (1) If the music is in your flash file, you can delay it a
    few frames. Too much in the first frame slows loading. You might
    consider adding a volume X button for those that want to browse w/
    sound.
    (2) Optimize the images of your page. There are a lot of them
    which is one of the reasons for the slow load.
    Is that your musical composition? If not, you should post
    your use with permission on the front page to oblige the author's
    permission. If you don't have that....lose the music. Be careful
    here, especially with professional sites.
    -Lokey

  • Do I have DNS problems? Slow loading or no access ...

    Hi all,
    Most of the time my broadband seems to play nicely however I seem to have painfully slow loading or non-loading websites with annoying regularity. It is not all sites and the problem seems rather selective.
    Sites that I know are up (such as bbc.co.uk) are sometimes impossible to load. A speed test shows somewhere between 2Mb and 7.5Mb (yeah, I know - contention in my area is a real issue).
    If I VPN out to a proxy server then everything works just fine.
    Does anyone know if this is a BT DNS issue?
    Thanks!

    Thanks for the reply.
    I changed my DNS to 8.8.8.8 but still no joy - pick a random page and some work, some don't. My smart TV is decidedly dumb and nothing will stream. Give it a few hours and it is usually fine.
    I am also randomly getting the message that "You're seeing this page becasue BT parental controls is active and you are attemtping to connect to a DNS outside of our network" which I am not...
    [sigh]

  • Shared Calendars / Room Lists and automatically forcing them to users based on Security Group Membership

    Good morning all,
    I need some help achieving the following in our Exchange 2013 Environment.  First off, we have Exchange 2013, but all our clients have Outlook 2010.
    Here's what I would like to be able to do:
    1) create/manage public calendars / rooms in exchange 2013
    2) force these shared public calendars / rooms to users' calendars who are members of particular security groups
    3) give edit permissions / "booking" permissions for the shared calendars so select users are able to make changes to the shared calendars, as well as accept/deny requests to "book" shared room calendars
    Any one got any resources they can give to point me in the right direction?
    I have already created two mailbox room resources, and have them set up in a room list in AD.  But need to know the above as far as creating a shared calendar for events, and forcing these calendars / room lists out to users based on security group
    membership.
    I don't want my users to have to know how to add a shared calendar...that would be a nightmare explaining.  I just want it to show up.
    Any help on this is greatly appreciated, thank you!

    1) I recommend using Room Mailboxes for resource calendars because it just works better.
    2) This is a standard feature of a Room Mailbox.
    3) You're pretty specific here, but I think this is also more or less available with a Room Mailbox combined with folder rights.
    I don't know any way to just make them "show up".  You'll have to teach them.  Well written instructions can work wonders.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Safari is extremely slow loading web pages, i have to latest software, no updating needed

    Safari is really slow loading internet pages and uploading images. I have the latest software update. I just purchased this mac book pro within the last 3 months..just frustrating that it's already this slow so soon....Any suggestions? I called tech support and nothing they walked me through helped. He was going to reinstall everything but I wanted to wait and see if there was anything else I could possible do before considering I just got this notebook, I hate to reinstall everything. It seems like there should be a simpler solution...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
    Launch the application(s) and test. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

Maybe you are looking for