Room Reservation feature - Some clarifications required
Hello
I am implementing room reservation feature for a business center whereby external tenants will be billed for meeting rooms who already have an office on rent in the same business center.
The requirement is:
1. Some of the services in the meeting room may attract discount based on case to case basis i.e. while creating the reservation request, I should be able to modify the price
2. Invoices have to be issued for the reservation and services cost on periodic basis. Will this be done through RERAIV ?
3. In our case, certain services are charges on fixed basis and thus created as a condition in the contract. Now the requirement is that, these services should be billed to client along with the reservation cost in one single invoice. As per my understanding, reservation cost has no link to contract master, so how can this be clubbed with conditions getting posted via RERAPP (conditions for the contract).
Please advise
Rakesh
Hi,
Pls give the error message here.
Anil
Similar Messages
-
Show ip cef switching statistic output - some clarifications required
Good morning, everyone!
I need some clarifications regarding ouput of show ip cef switching statistic on Catalyst 6k and some entries apply to other platforms as well. Consider output:
#show ip cef switching statistics
Reason Drop Punt Punt2Host
RP LES No route 179269 0 12866
RP LES Packet destined for us 0 153061543 2
RP LES No adjacency 12460594 0 0
RP LES Incomplete adjacency 10400 0 0
RP LES Unresolved route 1476 0 0
RP LES Bad checksum 17 0 0
RP LES TTL expired 0 0 24725338
RP LES IP options set 0 0 3
RP LES Fragmentation failed, DF 1757274333 0 481160
RP LES Features 975 0 5278
RP LES IP redirects 0 0 7
RP LES Unknown input if 192 0 0
RP LES Neighbor resolution req 32540982 7290 0
RP LES Total 1802468238 153068833 25224654
All Total 1802468238 153068833 25224654
Questions are:
1) What the difference between rows
RP LES No adjacency
RP LES Incomplete adjacency
RP LES Neighbor resolution req
2) What the difference between rows
RP LES No route
RP LES Unresolved route
3) What does mean collum name - Punt2Host?
I will higly aprecciate your answers! Thnx in advance.So far I partially have found answer on first question.
RP LES Neighbor resolution req - here counted packets that have no adjacency and they are punted to arp request to send.
RP LES No adjacency - after ARP request sent throttling adjacency is installed for this destination for 2 seconds and all subsequent packets get drop. Those packets are counted here.
RP LES Incomplete adjacency - here packets counted which matches to incomplete adjacencies. Which are stays in adjacency table marked incomplete - as i understand it can happen after arp entry aged out. But those adjacencies must be deleted as well, but as i can see in my environment some of them stays for a while, i am a bit confused here. -
Oracle Tele Services Case Management - Some clarification required.
1. Does Oracle Case Management solution supports De Dup check for suctomer data ?
2. In case management can we create another case from case work item screen ?
3. Can we customize case management screens ?Hi,
1. Does Oracle Case Management solution supports De Dup check for suctomer data ?
------Duplicate SR check can be implemented in Service Request module (i.e. Form Based Module) based on item/instance/customer using profiles/setup (Check Teleservice implementation guide - 'Setting Up Duplicate Checking'). It cannot be implemented in Case Management module.
2. In case management can we create another case from case work item screen ?
------There iss no out of the box solution given by oracle to create a new cae from existing case. However customiztion can be done for this which will call 'case creation API' to generate a new case.
3. Can we customize case management screens ?
-------OAF personalization can be used to personalize case management screens as per business requirement. Refer 'OAF personalization guide_R12' for this.
Thanks & Rgds,
Gaurav Joshi. -
Dear All,
Could anyone clarify the following.
1. How do I set the position of a child window relative to a widget in the parent window?
2. We have an application in which there is an extenisve usage of codes. The codes are created by the users. It is likely that the codes entered donot match the maximum size defined for it. My problem is while retrieving codes which donot match the maximum size defined for it.
For e.g. Customer code CharacterData Size 6
If I enter A00001 and store the record I am able to retrieve the information from the database when I supply the customer code.
If I enter A001 and store the record I am unable to retrieve any information related to the code from the database?I am to state that I have used the methods TrimTrailing and TrimLeading before I invoke the insert.
3. Is there any elegant way exporting project plans as a batch. We have a number of projects defined and it is really time consuming to export each and every plan from the Project Workshop. Is there a way by which a batch file containing fscript / escript / iscript commands can be used to achieve my objective.
Any help on the above queries may be addressed to [email protected]
Thanks in advance
Balasubramaniam Suresh1. I don't know. Please give more details.
2. If your database is ORACLE use VARCHAR instead of
CHAR in your definition. To retrieve the information
you need the like clause with placeholders to
retrieve it. ('A00001' -> 'A%1'). This answer is
works on ORACLE.
3. Use fscript. Set workspace and Repos. Open the
workspace. exportworkspace.
E.g.:
fscript> setrepos MyRepos
fscript> setworkspace MyWorkspace
fscript> open
fscript> exportworkspace /forte/MyWorkspace.pex
fscript> close
fscript> quit
Write these commands into a file (MyWorkspace.scr).
Start this command with fscript -i MyWorkspace.scr
Hope this helps
Joseph Mirwald
GERMANY -
Re: Some Clarifications Required
How do I set the position of a child window relative to a widget in
the parent window?If I understand your question correctly, you should be able to set it's
position by assigning it to a position on a grid on the parent window.
The widget on the parent window (that you're wanting to position
relative to) should be in a named grid. Then, you should be able to put
your window into that grid at specified row and column coordinates. To
position a widget in a grid, you do something like the following:
<Widget>.Parent = NIL;
<Widget>.Row = 1;
<Widget>.Column = 1;
<Widget>.Parent = <TargetGrid>;
I believe that you should be able to do the same thing for a window, too
(using "Self.Window" instead of "<Widget>"). -- although I didn't
actually try it.
Is there any elegant way exporting project plans as a batch. We have a
number of projects defined and it is really time consuming to export
each and every plan from the Project Workshop. Is there a way by which
a batch file containing fscript / escript / iscript commands can be
used to achieve my objective.Something that you could do here is to make a new workspace that
includes all the projects that you will be wanting to export. Then,
after updating this workspace, you can use fscript to export that
workspace (taking all of the desired projects with it).bala wrote:
2. We have an application in which there is an extenisve usage of codes. The codes are created by the users. It is likely that the codes entered donot match the maximum size defined for it. My problem is while retrieving codes which donot match the maximum size defined for it.
For e.g. Customer code CharacterData Size 6
If I enter A00001 and store the record I am able to retrieve the information from the database when I supply the customer code.
If I enter A001 and store the record I am unable to retrieve any information related to the code from the database?I am to state that I have used the methods TrimTrailing and TrimLeading before I invoke the insert.Bala,
The behavior that you are experiencing is consistent with a CHAR (fixed
length character) data type. Try redefining the column to VARCHAR and
you should get the results that you are expecting.
Steve Thomas
[email protected] -
Hi,
Does anybody uses the room reservation feature to manage the reservations of business meetings rooms?
I configured it and did some tests but I can't:
1) Link a reservation (T-code PP30) to the appointment calendar in SAP (T-code SBWP).
2) Send the invitation of the meeting to non-SAP e-mail adresses.
Many thanks,
JulienHi,
Pls give the error message here.
Anil -
Integration with Lotus Notes 8.5 - Room Reservation System to Add Approval Steps
I have implemented several LiveCycle Forms with Some Workflow all
based on XML and .NET. All working fine.
Now, I have a new project (yet to be approved) which is to add
Workflow and Approval Steps for Lotus Notes Room Reservation System.
The current system on Lotus Notes, is out-of-the-box from Lotus, and
it is working very well, and it has great repeat option to setup the
required schedule to make the needed room reservation system.
The user now requested to add some new features like add 2 more
approval steps, and some new fields.
I can modify the application in Lotus Notes, but this will creat a new
problem. If there is new version coming for this system from Lotus
Notes, then I will have to sync the modifications I did, and it will
be a problem.
I have put some screen shots to help understand what we are talking
about:
https://docs.google.com/leaf?id=0B97clwYte2SHYmUyZTRiZDEtZWRjZS00YmQ3LTg1MDUtM2MxNmYyYTIzM 2Ix&hl=en
I have developed several programs in the past, I was able to connect
to Lotus Notes Database from .NET.
My plan is to develop the new Form in Adobe LC Desinger, with all the
new required features, and connect to what ever existing functions/
data to Lotus Notes (in both directions).
The only thing I need help for is how to capture the Repeating
Calendar Entry. I think this will take some effort. Becuase, once I
capture all input parameters, I have to call a Web Service (in .NET)
to get a list of Free Rooms to choose from.
Here are my questions:
1. Do you have any feedback on the above ?
2. Any one has done any work to capture a repeating calendar entry in
a PDF Form ?Hi Anil
For Lotus notes integration with SAP solutions, pl check the following links:
http://www.redbooks.ibm.com/redpieces/pdfs/redp4215.pdf
http://www-306.ibm.com/software/info/ecatalog/en_US/products/Z262246B25186K14.html
Best regards
Ramki -
Reviewed documentation on Reporting: I will appreciate some clarification
Hi,
Reviewed documentation on Reporting: I will appreciate some clarification:
1. Can you help me understand what "Staging" means as used here:
A data warehouse system serves primarily to stage information from various data source
The information is staged in various forms including personalized reports, freely definable queries, and predefined reports.
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
3. Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
4. "DataStore Objects are available for transaction data and for master data."
When do we decide to store master data in a DSO?
5. Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
6. i. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
ThanksHi Amanda,
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
Yes, they are one and the same.
3.Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
in 3.x, you have infosources and not transformations. So you have basically two types of infosources, direct update and flexible update.
Direct update infosources do not have any update rules. These are used for master data loading since the format of data is usually fixed as in fields etc.
Flexible update datasources have update rules, which means that you can use it for loading pretty much anything. You can load master data by changing the update rules and you can use the same infosource for loading transactional data as well. What the statement means is that the infoobject has been set as an infoprovider. and therefore it can be used as a source in a query. The loading is done via flexible updates.
More info on direct and flexible updates can be found here :[3.x InfoSource Types|http://help.sap.com/erp2005_ehp_04/helpdata/EN/87/3fdf9587f211d5b2ff0050da4c74dc/frameset.htm]
5)Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
I'm glad that you understand what formula collision is...since its a difficult concept. Exception aggregation is much simpler.
For every key figure that is present in BW, there are two types of aggregations that can be maintained.
Standard: can be sum etc.
and exception aggregation like avg etc. When you do this, you need to give a reference characteristic. By default this is time. and usually it is summation. Now when you drilldown in your query based on the ref. characteristic, the exception aggregation is used.
Eg [http://help.sap.com/saphelp_nw70/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm]
6. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Essentially this is a preference or a personal choice basically. You can have several attributes. but keeping all of them as navigational does not help and degrades system performance as they have to be interlinked. For eg.
You have an employee ID as your characteristic.
attributes are as follows
Date of birth
division
salary stack
*** etc
now things like division,salary stack and *** could be used as filters in a query but date of birth would in general not be used as filter and hence would make no sense to use it as a navigational attribute(unless you want to find all employees whose birthday is a certain date ).
In the end, it just comes down to the requirement. If you are required to put a filter on an attribute of master data, then it needs to be a nav. attribute else a display attribute would suffice.
Hope this helps.
Regards. -
If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!
Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems -
It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??
Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times. -
Need some clarification on Replacement Path with Variable
Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
LavanyaHi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy -
Some apps require Adobe Flash; however, when I attempt to upload the program, I receive message to the effect that my iPad (version 7.0) cannot support Adobe Flash, so I am unable to view some attachments sent. I just bought my iPad recently and am still figuring everything out. If there is some solution to my problem, I would appreciate being advised. Thanks.
https://discussions.apple.com/thread/5461191?tstart=0
-
just set up my new laptop lenovo x240.
Windows 7 SP1.
itunes 64bit 11.3
first install went fine. then I tried to move my preexisting library. the library did not show the apps. so I tried around. Treid to re-install itunes.
Since I did, after the re-install, iTunes gives me the error message "iTunes cannot run because some its required files are missing. Please reinstall iTunes."
I tried the -_> link: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
unfortunately it did not resolve. please, advise... I am quite desperate... and surprised this is happening, since I am on a clean corporate laptop.
perhaps, can someone also steer me to a corner, where I can deactivate the cloud install pop-up ones starting iTunes?See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.
-
What I watch features do not require iPhone 5 or better?
I Am considering purchase of I watch. I am trying to find out which features must use a iPhone 5 or better Or do all features an daps require the phone. Any NGO is welcome.
Kappy wrote:
Which of course begs the question: Why does one need an iWatch? Is this backup in case the iPhone stops working?
It is a new world. People don't want to have to fish out their phones or have them always in hand - especially with the new iPhablet. In the new wearables market, the iWatch is always attached to your body. If it needs your attention, it will tap you on the wrist. It serves as your credit card and texting/twitter interface. It will not appeal to many people, but it wasn't designed to. -
Need some clarifications on Quality-of-services
Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
<b>Pls reward if useful</b>
Maybe you are looking for
-
so i am asking, where is the music i purchased??? all my playlists have song that do nt belong to them, and one playlist literally had no songs!! my itunes on tablet or computer shows the same. i hope am not the only one, maybe some of the apple ser
-
Use of Single Activity/ Multi activity Resource
Dear All, In which PP (PP-PI or IN Project system) area following functionalities are used Single activity resource Multiactivity resource Bucket resource Please reply Thanks, Shailendra
-
Where can I get a back to factory disc for a hp g6000 laptop
Where can I get a back to factory recovery disc for a hp g6000 laptop
-
FCPX and Aperture Library Issues
Does anyone else have issues with FCPX being unbearably slow when loading an Aperture library when accessing the Photos window on the lower right? I have all the most current versions of both Aperture and FCPX. I have a Macbook Pro Retina with i7 2.6
-
My computer DOES recognize my player because i can sync it with WMP or Winamp or even Mediasource. But what I cannot do (which i previously was able to do) is browse my player VIA Windows Explorer ie. My Computer. Any ideas?