Room Templates not Available

Hi All,
i want to create collaboration rooms using the standard templates provided by SAP.
i downloaded home_area_content_templates_fullupdate.zip to my PC. when i extracted the zip file i get ice-content file. i uploaded this file to room_extensions -> cm_stores -> TEMPLATES.
from the SAP help it is given that when i download the ice package, the 3 room templates InformationSite, ProjectRoom, and TeamRoom appears under room_extensions -> cm_stores -> TEMPLATES.
but in my case i see only ice-content file and not the room templates.
can anyone give me procedure to bring the room templates to the KM repository.
Thanks in Advance
Regards,
Kavitha

Hi Praveen,
Thanks for the response.
I followed the procedure mentioned in the help. but i get "IO Exception" when i upload the file using Content Management -> Content Exchange -> Package Upload.
what should be done in order to upload the room template package to the KM repository.
Thanks in Advance.
Regards,
Kavitha

Similar Messages

Business Intelligence Template not available

Hi,
I just upgraded a SP site from 2010 to 2013. And have turned on performance point services etc at both the site collection and site level. However, When I try to create a Business Intelligence subsite, that template is not available for me to select. Any
ideas of what I can do to fix this issue?
Sherazad

Verify if PerformancePoint is correctly associated with the web application. Refer to the following post for more information.
http://blogs.lessthandot.com/index.php/datamgmt/dbadmin/mssqlserveradmin/sharepoint-2013-bi-part-10/
http://sharepoint.stackexchange.com/questions/72176/where-can-i-found-and-how-can-i-configure-bi-center-site-collection-sharepoint-o
Cheers,

Fiori Launchpad - tile templates not available

Hi ,
In one of our client environment , only UI addon ( sp07 ) is installed in gateway system and custom SAPUI5 apps are developed.
I want to use New Fiori launchpad for catalog and tile creation . i am able to create catalog but when i try to add a tile the templates are unavailable.
Does tile templates are available only when one of the fiori UI component is installed or it available as a part of UI addon.
Right now i have to use old launchpage for tiles.

Hi Masa,
I have already implemented this note earlier , but now this note is updated with more patches of UI library, can updating the UI library to latest version will solve the problem ??
Regards
Yashpal Gupta

Room is not available at the time of Event Creation

Dear All,
I have created these objects..
Resource (Room1)
Location (Campus1)
Resource Type (Lecture Hall)
I already associated Resource with Location and Resource Type.
Apart from it I have Linked Resource Type with Business Event Type.
But still when I am going to create an event for the event type I do not get any available room and building.
Even if I am choosing any default entry (already provided in IDES system), I am not getting room attached to locations.
I have done it in my earlier project, but now its missing.
what could be the reason? Please help.
Thanks in Advance.

Sudhir, in order to make a room available at event creation, you have to mantain the following relationships and infotypes:
Object G (Resource)
Rel. 003 with object F (Location)
Rel 020 with object R (Resource type)
Object R (resource type)
Rel 020 with object G (Resource)
Rel 022 with object D (event type)
You also have to define the type of resource handled by object R. You can specify this at Infotype 1023 (Availability Indicators). You have to create this infotype, select the tab "Room", and Save.
Object D (Buss. event type)
Rel 022 with object R (resource type)
With all of this defined, you can then go to Event creation, and create an event from the Business Event Type that includes the room you have created. You have to select Location and then Room.
Hope this helps. Regards,
Diego

Shared Component User Interface Templates not available for page use.

Hello.
I created a new User Interface Template using the wizard under shared components. All it's supposed to do is display a header image on the page. I can click on the title under User Interface Templates and it will display fine. If I try to use that template, it will not display as an option under Display Option use custom template LOV under the Main tab of page modifications. Shouldn't it be available here for selection? I couldn't find any access grant options under Shared Components that might have explained this problem.
Thanks.
Kurt

Does anyone else have this problem? How did you fix it?

RE: VC Templates not available

Hi Everyone,
We are trying to view the templates fros a track from NWDI in VC 7.1. But the templates are not visible for the users.
The error log as follows...
Message: [VC-DevServer][]Execution of actionListSoftwareComponents of service CompLibManager failed : Reason : null
Category: /System/Server/DevServer
Location: com.sap.ds.core.processor.impl.ServiceInstanceProcessor
Application: sap.com/VisualComposerServerEar05
Thread: Thread HTTP Worker @886982024 ,5,Dedicated_Application_Thread
Data Source: j2ee/cluster/server0/log/system/server_00.log
Arguments:
DSR Transaction: b119669077c811dece7f0003baa4a7c3
Message Code:
Session: 221842
Transaction:
CSN Component: BC-DWB-VC-SRV
DC Component: developmentserver
Correlation ID: 5842250000000004
DSR Root Context ID: 934598F077C811DEB6A70003BAA4A7C3
DSR Connection: b119669077c811dece7f0003baa4a7c3
DSR Counter: 0
Log ID: 0003BAA4A7C368990000001600000DD8
Please help...Thanks

Hi ,
The error message you attached is the top level error hence provides no information. You can try to reproduce the error again and then when you look into the default trace look for the first error message that matches the timestamp. If you attach that I might be able to provide you more information.
Thanks,
Nati

UI Templates Not Available

Hi,
I would like to create some UI Templates. The problem is that
the Shared Components link in the Application area is simply not
present. I log in as portal30 admin and still no link. Has
anyone experienced this problem before. I am using Portal 3.0.9.
Thanks,
Rebecca

I'd like to add that there are several errors with this
Double-click extension. It would not install on a Windows XP
machine with CS3, stating "This extension requires Macromedia Flash
MX or greater. Quitting." Oh, CS3 isn't greater??
Also, I found the Window > Other Panels on my Mac version
(where the extension did install but doesn't show up on the welcome
screen) and when I try to open the Motif Panel, I get several
Javascript errors and the panel opens up with blank content.
I will be sending a note to the author of the tutorial. Users
trying to develop Flash ads with the Flash Ad Kit be warned - it
doesn't work!!

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Room Template's icons are not displaying

In Collaboration->collaboration content->Administration of Room part Templates,
The Room Template's icons are not displaying.
All icons are avilable in the folder
\usr\sap\J2E\SYS\global\config\cm\etc\public\mimes\images
i checked in both IE 6.0 and Netscape.
Please give some Hints about this.

i solved the problem.The root directory was changed.So i corrected.The path is as follows
systemAdministration<>SystemConfiguration<>KnowledgeManagement<>ContentManagement<>FileSystemRepository

Web service not available in F4 help of document template

Hi ,
I have created a web service using tool WS_DESIGN_TOOL. Its active and status is productive. Now when I am creating document template , I am not able to see this web service in F4. Hence not able to create document template with my web service.
I also tried by copying standard web service and then using it but even that web service is not available in F4.
Do we need to any additional steps so that web service appears in F4 help of document template.
Thanks,
Madhura

Hi,
The service is active in SICF or in SE80 under package $WS_BOL_GEN.
I have assigned Business Transaction . I have followed steps as per below thread.
[Re: CRM 7.0 Document templates;
Any more suggestions are welcome.
Thanks,
Madhura

Room Template Changes not reflecting

Hi,
I have a Collaboration room template called Community. In that I have the Quick Poll Maintenance iview. I was getting the following error while creating a quick poll. When I try to add an image to a response in the quick poll, it gave me portal error. This was happening only inside the Collaboration room and not outside. Then I changed the mapping of the property PathToImages for the iview in the template to private_docs_path and saved the template.
Now the error does not come in the new rooms that I create with this template. But the old rooms are still having the problem. Any idea why?
Alos, for my old room the template is being displayed as Community_&VER&22 and for new rooms is Community_&VER&28. Is there any way to synchronize the the template versions?
Regards
Ranjith

Hi,
which version of the portal are you using?
Starting with NW04 SPS 17 / NW04s SPS8, you can transfer changes from the template to existing rooms. Before these releases, this is not possible. Please have a look at http://help.sap.com/saphelp_nw2004s/helpdata/en/44/168eb1c3641a75e10000000a1553f6/frameset.htm
Kind regards
karin

SAP templates use BAPIs not available in 4.7

We are trying to use the SAP module library templates for PP - We are running 4.7 and do not have access to BAPIs BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL, two of the BAPIs used in that template.
Any suggestions or help would be appreciated.
Thanks

If these BAPIs were not available in 4.7, then you would probably have to create them. But I was pretty sure the Production Order BAPIs were in existence then. You may want to post on a different board when some more savvy ECC folks would chime in. Are you sure you don't need the Process Order BAPIs? For BAPI_PROCORD_GET_LIST and its fellows were not released until ECC 5.5 (I think).
Regards and Good luck!
Mike

Ionic Side Menu Template - Javascript JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available!

I am using VS 2013 ,CTP 3.1
When I tried to run the Ionic side menu template on Emulator 8.1, the javascript console shows below exception -
Exception was thrown at line 9576, column 11 in ms-appx://io.cordova.myapp8724a31325644ec29a8d2d88682b7987/www/lib/ionic/js/ionic.bundle.js
0x800a139e - JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available! You either misspelled the module name or forgot to load it. If registering a module ensure that you specify the dependencies as the second argument.
http://errors.angularjs.org/1.3.6/$injector/nomod?p0=ngLocale
There was no code changes to any of the files.
Please advise.

Yes. I am using the same template.
I am not able to attach the screenshot here.
This is the error -
'WWAHOST.EXE' (Script): Loaded 'Script Code (MSAppHost/2.0)'.
Exception was thrown at line 9576, column 11 in ms-appx://io.cordova.myapp8724a31325644ec29a8d2d88682b7987/www/lib/ionic/js/ionic.bundle.js
0x800a139e - JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available! You either misspelled the module name or forgot
to load it. If registering a module ensure that you specify the dependencies as the second argument.
http://errors.angularjs.org/1.3.6/$injector/nomod?p0=ngLocale

Exchange 2010 - Issues with Room Finder not showing available rooms.

Hi,
We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
for troubleshooting:
Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
. We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
If I have missed any information please feel free to ask for more info.
Thanks, all help will be appreciated.

Hi,
According to your description, I understand that room finder cannot show available room in Outlook 2010.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Room Templates not Available

Similar Messages

Maybe you are looking for