Roomparts - Deactivation of navigation jump

Hi, on a Netweaver 04 portal, I have got the problem, that the navigation "jumps" in a collaboration room, when a roompart is opened.
"Jumping" means, that the default room menu (detailed navigation) is deleted and the first page of the room part (for example "Contacts") is now the only point left in the detailed navigation.
This problem occures only in a customer specific desktop, which i haven't developed myself.
What if have already tried:
- checked the settings of the page and workset of the roompart
- checked the default settings of the detailed navigation iView
- replaced the customer specific framework-page with the default framework page
I couldn't find the reason for this jump. The replacement of the framework pages did not have any effect (still a jump). The only thing left to configure is the motive, but this is only a configuration tool for css, isn't it? I couldn't find a responsible option.
Any ideas are welcome. Feel free to ask, if anything is not clear.
Best regards
Sandra

Hi Sandra,
your problem sounds similar to this one:
Links in portal toolbar no longer working after navigating within a room
Maybe they are related?
Hope that helps,
Jens

Similar Messages

  • Top Level Navigation jumps to wrong workset

    Hi,
    In our portal (SP15), rather than loading the first page/iview of each workset in the top level navigation, we wanted a starter page that said something like 'click a menu item to continue'. To achieve this, I created the relevant URL iview and added it (delta-link) to each workset that appeared in the TLN. I then changed the properties of the iview so that it was Invisible in the Navigation AND Default Entry for Folder. So now when you click on a TLN node, the iview appears but doesn't show in the menu.
    However, this has created some strange behaviour. Once a node on the TLN has been selected that points to proper page or iview (i.e. one that appears in the navigation), if you then click on any workset on the second level (first level ones are ok), the TLN "jumps" back to the node which has the page/iview - but still shows the starter page iview. This means that users can't access any workset on the second level, except the first one to be displayed (i.e. when you have several nested worksets in a workset).
    Can anyone explain why this is happening? The problem only occurs when the starter iview is both Invisible in the Navigation AND Default Entry for the Folder. Is this expected behaviour (and if so, why?) or is it a bug? Is there another way to achieve what we want?
    Many thanks
    Jane

    If I do that, the iview does not appear because I already have an Entry Point above that level (i.e. the Workset). Entry Point as Yes only sets the initial navigation node, it doesn't force an iview to appear. (or at least this is what my testing has shown).
    We may have to rethink how we can do this - does anyone know of a way to stop the first iview/page loading in every TLN node, and instead just showing the portal background?
    Many thanks
    Jane

  • Date navigator : jump year to year

    hi,
    i use a htmlb date navigator in my application.
    <htmlb:inputField
           design="STANDARD"
           id="date_attendue"
           type="DATE"
           showHelp="TRUE"
           size="25"
    />
    It shows me one month and i can navigate between months. But i want to navigate month by month but year by year in the same way (arrows to navigate month and arrows to navigate years). I can show 12 months to do this but, isn't there a way to show one month and navigate by month and by year ?
    Thanks

    Unfortunately not available/possible, and we can not handle this request at the moment. Will keep it in mind if every we should get a quiet moment again. This is no promise!

  • How can I navigate to a new page when after-submit process running proc

    I have a long running procedure and would like to provide the users with an animated gif to indicate progress that updates a description line to indicate the current step in the process.
    Currently I have a couple pages in this application in which a stored procedure in a package is called which performs a long-running process which updates progress in a table. These processes have a single parameter argument. In these cases I call the procedure via the Job Scheduler as part of my After-Submit process and the page navigation jumps to another page which shows a graphical representation of % complete based on the progress updates in the table and refreshes itself every 5 seconds until the job is complete. This works fine.
    I am now running into an issue where I have a more complex set of processes, with a number of parameters. To resolve this I used the same process as above, however, I first check to see if the process exists in the Job Scheduler, if not I create it. I then set all of the parameters and tell the job scheduler to execute the procedure. This should work similar to the process I am running on the other pages, however, in this page where I have multiple parameters and send an execute command rather than an execute immediate on job creation, the system runs the entire job prior to running the page branch, as a result the end user is stuck on a hanging page with no user feedback for two minutes after pressing submit.
    I am looking for how to call the procedure and have the branch execute so a progress screen can be viewed. I am not committed to the use of the job scheduler if there is a better way.
    Any help is greatly appreciated.

    The process involves
    (1) a detail table filled with phone usage data, approximately 175,000 records per month.
    (2) a table that stores what various combinations of codes in the detail table translate to for types of calls or data transmissions
    (3) a summary table for the months calls and billing
    (4) the E-Business Suite.
    (5) A GTT for temporary crossreference storage
    (6) A GTT for reporting data
    I have a parameter page where the user selects what data they are looking for and then submits it to generate the report.
    The generation of data is a four step process.
    (A) Retrieve the Code Combination ID's for the phone usage specified in the parameters from the summary billing table(1) into a GTT(5)
    (B) Query the department and Account Code Block Details from E-Business Suite(3) (using dblink) for the CCID's in step one and add to the GTT(5)
    (C) Run a query which uses the detail table(1), a function against the crossref table(2), and the crossreference GTT(5) to create the output in the report GTT(6)
    (D) An ApEx page process that counts the output and returns to a page without Export to Excel for over 65000 records or with Export for under.
    The parameter page is an ApEx page with some text fields, a couple date fields, and some checkboxes. An after submit process calls a packaged procedure which calls separate procedures for (A), (B), and (C), the page then branches to a page that shows an animated gif and current step of the process {this is what is not working right now}. Once the task completes this page branches as per (D) to a page that shows all the contents of the GTT report(6).
    The process works successfully with the exception that instead of going to a page to show the process the system simply hangs on the parameter page after the submit is pressed until the processing is done and then goes to the processing page just long enough to branch to the report page.
    I am beginning to think that I should alter the design to not use the GTT, but include the username as a field in the output table with a binary index on it for speed so that I can use the job scheduler to run a separate session and hence enable the processing page. The processing page is important as the query can take anywhere from 2 minutes to 2 hours to generate the report depending upon the parameters.

  • SAP NOTE 1015341

    Hi Gurus,
    I am trying to install SAP note 1015341 for BI 7.0. I am getting error 1015341 is not released. Any advice ?
    Thanks
    Liza

    It seems some problem your side as I can see the same oss note.
    This is the details of note.
    1.000 BW-BEX-OT-RRI 1015341 Display hierarchy is deactivated in the jump destination

  • Naming slides

    Hello,
    I have a question. Is there any significance to naming a slide [01]  [02] ?
    Does naming it that way enable something?
    I am working with a template created by someone else and this notation puzzles me.
    Also they have a page numbering convention - that looks like this on the page
    $$CurrentPage$$ of 33
    and has an advanced action that reads
    Expression    CurrentPage = CurrentPage  + 1
    Go to Next slide
    Thanks for your help with this.

    Hello,
    That is a very strange way of labeling slides, in a TOC it will not tell a lot. Maybe the slides are grouped and the group has a significant label (like a chapter title) and the groups are collapsed in the TOC.
    I will always label slides, not for TOC only, but it is a lot easier to create custom navigation (Jump to...) when referring to a slide label then having to look for its number. And when you rearrange the sequence of the slides, labels remain, slide numbers will change.
    CurrentPage seems to be a user variable (check the Variables dialog box). Check also its default value, is it set to 1? And I suppose the action is triggered by the Next button on the slide? It is not a very good idea, because if the user will revisit the slide, the slide number will increase again and the progress indicator will show strange numbers. If you find out:
    default value in the Variables dialog of CurrentPage
    which event is triggering the action you showed with the Expression
    I will offer you a better solution that has not the drawbacks I talked about. There is a system variable cpInfoCurrentSlide that starts with index 1. If the goal of this progress indicator is to show the slide number and the total number of slides, this progress indicator will do the trick much better, and no need for an advanced action at all:
    $$cpInfoCurrentSlide$$ of $$cpInfoSlideCount$$

  • Query Jump with Navigation ( Sub query need to show same Navigation )

    Hi All.
       We have 4 BEx queries in our Dashboard Web Template and each table web items shows 10 rows and remaining with Scorll.
       For Printing ,we have created a query jump for each BEx Query ( same copy query) that shows all the rows detail.
       When i tried to jump from Orginial Dashboard ( From Specific table/Bex Query) with drill down <b>( Plant by Material )</b> , the jump query is not showing the same drill down but it showing the default rows <b>( Plant as per query rows</b>).
       SAP has suggested us its possible to do Query Jump with Navgiation that shows the same drill down path (navigation) in Sub Query as well.
       Am unable to find how to configure that , did search in OSS / Other Forumns But there were no postings on this.
       For me there is no Settings in RSBBS (or) SPRO and tried the Web Address Jump as well to pass the Drill Down Status (or) Navigation. May be iam not looking at right place. We are at 3.1x
       We found some limitations with SAP recommended web printing ( we dont need to discuss about that as per our requirement ), and our users like the Query Jump printing as which we working on now.
       Please inform if this can be possible, if so how.
    Thanks
    Martin Mouli

    Thanks for reply Bhanu.
    Its not like just Plant by Material.
    I would like to do my slicing & dicing on Navigational block with any combinations ( Customer by Plant by Material )
    When i do query jump from My Original Web Table , my jump query need to show the same drill down ( Customer by Plant by Material)but its showing only Material. ( Which is a default row in sub query)
    To show the same navigation in jump query as well, right now am doing drill down again in jump query as well. Its time waste to repeat the same drill down steps in sub query.
    By default my Jump Query has Material as row and We will show Plant & Customer on Demand (free characteristics)
    Please inform if more information required.
    Regards
    Martin Mouli

  • Screen Jumping when opening Navigational Block

    Hi all.  I have created a template and having a problem with the generic navigational block.  It shifts the screen down to put the block at the top of the screen.  We have recently upgraded to BW 3.5 and I think I see the problem...just not sure what to do about it.  When I expand the block the URL changes to have "anchor=SAPBWUForm27&rnd=ID847810278330&dummy=#SAPBWUForm27" at the end of it.  If I get rid of the "#" in that string then execute the URL, it works ok (without jumping) but if I try to expand or collapse by clicking on the block then the "#" comes back...along with the problem.
    Any ideas?
    Thanks,
    Jeff

    Hi Jeff,
    Did you solve the issue yourself?
    I am facing the same problem...
    Br
    //Sam

  • Navigation to jump to different menu ?

    Most chapter menu systems on commercial DVDs allow the navigation flow to advance through several menus, where each menu "page" may have 4 chapters, and on the fourth chapter, the right arrow would actually advance to the first chapter on the next chapter index "page."
    I only see how DVDSP4 allows navigation buttons to map to other buttons on the same menu, not jump to another menu.
    Is this not possible, or is there some workaround/trick?

    You can place a button with auto activation (which can be quirky) to jump to the next menu so when the right key it pressed after the last button it moves on.

  • Interesting Result ....... Jump Over Tab Navigation Area.

    I received the following as my rendered page:
    Jump Over Tab Navigation Area.
    HomeHelp
    I was navigating from a page with a single button to a page with a TabSet containing 2 tabs. These 2 Tabs were labeled Home and Help.
    This is occurring on a Tomcat server 5.5.23.
    Any help would be greatly appreciated.

    A bit zen - and not much help, especially for someone, such as I, with a Masters in Drawing (Fine arts) and no formal programming skills whatsoever.  Producing a complex rendering of the human form = easy.
    I think what the problem that I'm having is how to get the image array (which could have an infinate amout of images) and the tab array (which could have anywhere from 1-6 tabs depending on the job) to associate, then pass on said variables to dynamically loaded image (holder) MC.
    To say that Tab 1 would cover images 1-4 all the time could possibly be easy to figure out.  On the other hand, the need is more like:
    Tab 1 is [i] through [n], then passing on the variable result so that first page value is set so the next button could also then compare the that page vs the next image in the linear sequence (ditto for the back button) then passing that on to the page count (dynamic text box) and loading in that page / image.
    back to the drawing board.

  • The little 'down' arrow that used to live next to the forward and back arrows in the upper left of the navigation bar, is missing. It was handy to use to go back in big jumps without having to go back one step at a time. Can you please restore it?

    When searching through a website, covering many pages of information, sometimes you just want to jump back to a page.
    Using the little dow arrow was a handy way to see where you have been and to jump multiple steps/pages backwards without continuing to click back, back, back, until finally reaching where you were. I really use it a lot and am hoping you will either restore it or provide me with a new way to do the same thing.
    Thank you!
    Maggie

    The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
    Use one of these methods to open the tab history list:
    * Right click on the Back or Forward button
    * Hold down the left mouse button on the enabled Back or Forward button until the list opens
    You can look at this extension:
    * Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

  • Navigating through contacts -- jumps around

    Sometimes when I am trying to view contacts in list view and press the arrow key down to go to the next contact, it goes all way back to the top. Why is this?
    Thanks.

    If it's just a room of rectangular shape why don't you just limit the x and z coordinates of the viewer?
    Check the viewers x and z every frame. If it has wandered out of the room place it back there...

  • Navigation Step jumping Urgent!

    Hi guys,
    i have a varible of customer exit type with ready for entry
    however when i debug the query the i_step = 2 is getting skipped
    and also the query says no applicable data found
    help me out guys
    Thanks

    Hi Realist.
    [edit] Deleted. Was not correct.
    You might have to give some more information to solve the "No applicable data found" problem.
    Hope it helps.
    BR
    Stefan
    Message was edited by:
            Stefan Stefansson

  • Sharepoint 2013 Datasheet View Navigation performance Issues on large lists

    I was recently upgraded to SharePoint 2013.
    In SharePoint 2010 Datasheet View, one could scroll through and bulk select 100s of line items in Datasheet view very easily.   Navigating the datasheet view was just like navigating through a worksheet in Excel, and one could use quick select
    keys like ctrl-shift-right arrow / down arrow to bulk select items.
    After the upgrade to SharePoint 2013, using the "Quick Edit" tab in Datasheet view and changing the Item Limit to 5000 items, it takes an inordinately long time to load the list.   None of the quick select keys like ctrl-shift-right arrow
    works anymore and the browser keeps warning about a slow-running script when attempting to select multiple items while scrolling through the list. 
    The functionality I need is for users to be able to bulk delete all line items in a SP list and copy (from Excel) and paste new line items into the SP list through their browser. 

    I am running SP Server 2013 with the Dec CU on my internal farm.  This past week, I migrated 1 database containing 1 site collection (also ran the site upgrade to 2013).  Prior to the migration, the users were using Datasheet View in 2010 to bulk
    edit and also add attachments through the pop up window while in Datasheet View.  After the migration, performance on their list using IE8 with less than 300 items was horrible for the end user and also for me as a farm admin (I'm running iE11). 
    I created a new view and performance seemed better for me and a slight improvement for the end user, but still not satisfying.  The end user is using Chrome in the interim until I can test with IE9 to see if that makes a difference.
    My main concern is the Quick Edit view.  This user needs to be able to use the 2010 Datasheet View to manage attachments while in DS view.  I created a new DS view on the affected list, but it still defaults back to the Quick Edit view.  This
    list is on 1 of 3 web apps in my internal farm.  The interesting thing is that I can create a 2010 Datasheet View in a custom list on a site that was created in 2013 from scratch in another web app on my internal farm.  However, I can only do
    this on 1 of 3 web apps.  On my 2013 external farm, I can create a DS view in a 2013 site created from scratch in 1 of 2 web apps.  Creating a list on the 2nd web app in DS view defaults the list back to Quick Edit.  I checked in SharePoint
    Manager thinking there was a web app feature that wasn't getting activated.  There was only 1 web app feature that jumped out.  Academic Library Site Safe Controls was activated on the 2 web apps I could create the 2010 Datasheet View on, but
    not the other 3 web apps I could only seem to get the Quick Edit view when creating the DS view.
    Is there a feature that needs to get activated or one that might need to be deactivated/reactivated?  My internal farm with the 3 web apps is running the Dec 2013 CU and the external farm w/the 2 web apps is running the March 2013
    PU.
    Aside from that, I've received complaints on the list performance using IE and not being able to use the 2010 datasheet functionality as noted above.  I haven't received any complaints on being able to only copy 100 items in Quick Edit view at a time,
    but I have also noticed that issue.  In my case, the retry doesn't work and I have to delete anything over 100 items before it will save.  I would like to find a resolution on this as well.  Every bit of help I can get with this issue is very
    much appreciated.  Thanks in advance!

  • My iPhone 5s keeps deactivating itself.

    Let it first be said that I jumped in a pool with my iPhone 5s. I was able to open it up, dry it out, and it was functioning fine until I left it out in a rainstorm. At first, everything was fine, but I started noticing that a few things were amiss. I could listen to my iPhone with earphones, but was not getting full sound out of my Apple earphones with a mic. Also, Bluetooth would work for Siri, but not for a phone call. I don't know where the signal went, I couldn't hear anything until I went back to the iPhone. Finally, since I upgraded to 8.0.2 my phone keeps deactivating itself and can't keep a good cellular signal. Of course, by now I've messed around inside my phone several times. Anyone?

    Someone else may be able to offer suggestions, but my best guess is the water has permanently damaged some components. The only solution is to replace your phone.
    Seeing as you've worked on it yourself, Apple will not sell you an out of warranty replacement. You would have to pay full price for a phone.
    You may want to seek help over at ifixit.com to see if anyone there has had similar issues/can suggest parts to try replacing.
    ~Lyssa

Maybe you are looking for