Rooms and CM Repository

hello,
i've read this Blog: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6594
and i was wondering if i can use a filesystem as a repository only for some of the rooms and for the others to use the standard way, the db.
if yes, how?
thx
help will be rewarded

Hi Irina,
you just have to create the rooms based on different room templates. For the first room template you configure the extension point to point to the DB (store = cmDocuments). For the second room template the room extension should point to the File System (store=cmDocumentsFS).
Please reread the section "3. Configure Extension Store" and "4. Room Template Administration" of the Blog.
regards,
Ursula

Similar Messages

Collaboration Rooms and Document Uploads from Network

Hi,
We are starting to use Collaboration Rooms and would like the Documents iview to point to our network file system, so when a user uploads a file he can do it via the portal or our network drive. We are using FSR's elsewhere and are wondering how to incorporate it into a collab room document iview. Our portal environment is NW04 Stack 12.
Any assistance would be most appreciated.
Thanks,
Kris

Hi Kris,
what you need to do is to create a collaboration room template that would integrate a KM Navigation iView that points to the file share. Of course, first you need to integrate the share via repository manager in KM.
I hope you know how to integrate the share into KM. For more on how to create a room template check the info in this thread:
Collaboration Room Creation error on NW04 SP9
Hope this helps,
Robert

Virtual Rooms and Knowldge Management - Best Options

Hi experts,
One of our partner companies have a requirement for creating different project rooms and sharing documents in these rooms.
They have documents with sizes up to 60 MB to share and they need to do the upload/ download through internet.
I would like to get few suggestions on the following queries:
1. Which is the best repository to store these documents? separate file server or something else?
2. How reliable is the knowledge management platform for uploading and downloading files of these sizes?
3. Is there any in-built way to retrieve these files using a mass download, in case required?
4. How can we monitor the data download/ upload volumes in a specific period?
5. Is there any global file viewer options available in KM? for viewing autocad and microstation files
Can any one give suggestions on these?
Thanks a lot for your help.
Shobin

HI
1. Which is the best repository to store these documents? separate file server or something else?
u can store in CM repository because it supports all the cm functions like subscription etc
in general documents u upload through collaboration rooms is stored in collaboration repository which is of type cm repository.
2. How reliable is the knowledge management platform for uploading and downloading files of these sizes?
if u r uploading documents frequently u can use portal drive option.
4. How can we monitor the data download/ upload volumes in a specific period?
u can monitor using subscription functionality for the folder which will notify u incase of any event say downloading or uploading the file
5. Is there any global file viewer options available in KM? for viewing autocad and microstation files
thers is nothing like that in km but u can make use of local editing option which will import the file to local desktop and allow modification to the file then u can check in the file later
in the mean process this particular file was locked for other user.
Regards,
Vijay.

Can I have 2 HD DVRs in the same room, and control them separately?

New FIOS TV being installed in two weeks, making the switch from Dish Network.
If I have two DVRs in the ame room, and two remotes, can the remotes be set up to work with each DVR separately, or will one remote cause both DVRs to respond? WIth my Dish Network DVRs, I can set a remote code for each - can I do the same with the two DVRs I'll be receiving?
Thanks!
Message Edited by frabman on 12-05-2008 11:51 AM

DallasTX wrote:
Replace one of your Verizon DVRs with a TiVo. I've had a Verizon 6416 and a TiVoHD with an upgraded 500GB hard disk for about two years now. I prefer the TiVo especially the program guide information.
The TiVo doesn't do Video-on-Demand, but you would still have the Verizon DVR for that.
Since you can control multiple TiVos from a single remote in the same room, you could add a second TiVo if you needed three DVRs.
Message Edited by DallasTX on 12-06-2008 06:39 AM
As it seems that all the shows I want to watch are on at the same time, having two DVRs (4 tuners) would resolve the "what to record" problem I keep running into. The fact that you can control two TiVo DVRs with one remote is a great plus. However, how did you hook both of your DVRs to one set?

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
Here is the link;
http://www.photosync-app.com/

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

Thoroughly angry and frustrated. I've run out of room and need to make more to add more songs. Once and for all, how do I, if I even CAN, delete music from my iPod Nano WITHOUT losing them from iTunes?

Thoroughly angry and frustrated. I've run out of room and need to make more to add more songs. Once and for all, how do I, if I even CAN, delete music from my iPod Nano WITHOUT losing them from iTunes?

You should take the time to familiarize yourself with the documentation that is available. You can "uncheck" a song in iTunes, and then do a manual update.

Have down loaded Yosemite over Mountain Lion. Indesign CS 5 is not working and requests Java script CE6. Apple stated Java 10 , but it still does not operate although Bridge works so as Light room and Photo Elements. How do I solve this problem

Have down loaded Yosemite over Mountain Lion. Indesign CS5 does not operate although Bridge, Light room and also Photoshop elements operate OK A sub menu from Indesign request Java SE 6, after a long play with Apple I end up with Java 10 How can I solve this problem rapidly. Pity apple do not test there products before offering them to the public. It costs us. Many thanks Davi E-C

It isn't Apple's job to ensure third party software works with a new OS. But Java 6 is here:
Java for OS X 2014-001

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

Master and work Repository

Hi,
Can we create Master and work repository in one oracle schema.
And can we create work2 respository in oracle schema2.
Do we find any issues later.
Please advice

As far as I know it is not recommended solution to create both master and work repositories in one Oracle schema, better create them as separate schemas.

HT1595 I have hooked up a second apple TV in another room and neither can see my computer when both connected. When i disconnect 1 box it works fine?

I have hooked up a second apple TV in another room and neither can see my computer when both connected. When i disconnect 1 box it works fine?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

How do I get light room and ps 10 on my new computer? Old computer crashed

I have a new windows 8 computer. I had light room and pS 10 on my old computer. How can I get them on this new computer without repurchasing? I have the code of my lightroom sitting here but I assuming you can only use it on one computer and I used it on the old computer.

you can use on up to two computers. Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: DC | XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

I just paid for what i thought was light room and have ended up with nothing,creative cloud wont open anything.

wanted light room and have ended up with creative cloud which wont open anything.wth?

Adobe does not market old version of their products the old downloads are available mostly for old licences users so they can download their licenced products should they need to. So if you do not have a licence for Lightroom 3.6 after your 30 days trial install expires you can not use it or purchase a licence.
It would be a good Idea for you to get a new computer with Windows 7 or 8 on it. I prefer Windows 7. If you are still running XP though its a good OS and runs on old Hardware that Windows 7 and 8 can not run on. Its best to turn those old tired machines into network print servers and have nothing of value on them. For Windows XP is no longer supported by Microsoft and security holes that are still in XP will not being plugged. You just inviting the waiting intruders in they will show up it you connect to the web and uses it.
If you are using old hardware for a modest price you can get a new machine that is more powerful then the one you using. With wireless devices it nice to have a network printer your current machine will be of no value to anyone. If you hate the idea on scrapping a working machine a print server may be the was to go IMO.
If you purchased a Photographer CC subscription you can install the subscription Photoshop CS6 version 13.1.2 that should run on XP with some newer PS features unavailable like 3D any feature the requires a GPU. CS6 does not support any GPU on Windows XP. You can do all that LR can do to images and more with Photoshop. I do not even download Lightroon. I don't need its library system or desire a second UI over the Adobe RAW conversion Engine. This save disk space and I don't have to maintain and additional Adobe product and a simpler work-flow.
Besides CS6 you can install LR 4.4 I do not use LR so I have no ides if it will run on XP. XP not listed in LR 4.4 requirement.
found this
Adobe Photoshop Lightroom 4 does not support Windows XP. This decision did not come lightly and was based on a number of factors. With each version of Lightroom, our goal is always to provide a consistently excellent customer experience. Developing and testing across Operating System versions and platforms to ensure that we’re achieving this goal is a significant effort that takes time and resources. XP is substantially different from Windows Vista and Windows 7, and requires an independent testing matrix, which increases the complexity of our development efforts. Every cycle we need to make difficult resource tradeoff decisions and operating system support competes heavily with new features and performance enhancements planned for each version. The decision this cycle was to end XP support for Lightroom going forward.

Collaboration rooms and Inner Page == embedded

Hi,
does Inner Page Isolation Mode has always have to be set at URL?
When we set Inner Page Isolation Mode to Embedded the collaboration rooms and collaboration detailed navigation are not working anymore and the browser is redirected to:
http://somecompany.org:50100/irj/portal?standAlone=true&windowId=WID1243256552687
Any ideas what could be the cause and how to fix it, besides setting Inner Page isolation mode to URL?
Maybe EPCM.doNavigate used in collaboration rooms requires that the Inner Page Isolation Mode should be set to URL?
Regards,
Ladislav
Edited by: Ladislav Pomezny on May 25, 2009 3:34 PM

I've set inner page isolation mode to url.

Rooms and CM Repository

Similar Messages

Maybe you are looking for