Root cause for delivery to show up on LX47 transaction

All,
I am new to SAP and supporting an off site warehouse location. I'm trying to research and locate the root cause for why a delivery shows up on LX47.
The situation the warehouse is experiencing is that they are having to run the LX47 transaction multiple times a day to correct delivery issues.
I know from my initial research that deliveries show up on LX47 due to the OB Delivery being blocked, and that this is caused by the OB delivery and related Transfer Orders do not match in the system.
What I'm trying to figure out is, from an Operations standpoint, what is causing the OB Delivery and the TO's not to match?
Is there only 1 reason? Are there 100? This is what I'm trying to understand.
The only thing I have found thus far is that 2 people/transactions are in the delivery at the time of the update. Is this accurate?

Hi Nicholas,
I am sure you are very much aware about the process flow however i just want to narrate again, if the plant and storage location is WM managed then you generally create a transfer order with reference to the delivery document to perform the picking process now at the time of confirmation of the transfer order you can update the Delivery immediately (Standard SAP) or you can set the indicator to delay the delivery update(Check the below mentioned screen and IMG path).if you choose to delay the delivery update those delivery will appear in the LX47 and you have the provision to manually update the Delivery from there. (Apart from the above mentioned there are some instance where after confirmation of the transfer order and in between updating the delivery either material master / Batch master / or some other relevant parameter is in edit mode or locked which cause failure to update the delivery immediately and you will find those delivery will also appear in the LX47)
Hope this will help to get some idea about LX47 and reason for delivery whose appear in the LX47
SPRO PATH
SPRO---Logistic Execution---Warehouse management ---Shipping ----Define Shipping control -- Shipping control per warehouse

Similar Messages

Root cause for 100 % disk utilization

Hi All,
Whenever in one of the dailog instance disk utilization is showing 100% sap system is getting very slow,what is the root cause for 100% utilization .At that moment of time when I checked the CPU usage it showed 98% CPU idle. server is on Windows NT and around 13GB of RAM is always free.
We have only one drive in the apps server.Can this be the cause of 100% disk utilization?
Waiting for ur frequent responses.
Regards,
Prashant

Hi,
I have answered similar questions :
[Re: Disk Utilization 100%]
as described above, one thing that cause 100% disk utilization is that writer processes (and read process too) is concentrated only on a single disk (equivalent to single volume group or single logical volume).
we can imagine that a large number of user hitting the single disk (where datafiles exist) on the same time with a huge transaction load.
if we can manage writable datafiles in several locations (equivalent to several volume groups or several logical volumes) where several datafiles exist, writer processes (and read process too) will be distributed to that several locations, so that each location (each disk, each VG or each LV) utilization may not reach 100%.
so it is important to design writable datafiles in multiple location in different disks to prevent 100% disk utilization.
one thing should be remember is to consult with hardware and storage vendor if there is any possibilities bottleneck or I/O issue on your hardware or storage.
hope it help you.
rgds,
Alfonsus Guritno

Root cause for logins were timed out in Asychronous mirroring

We have SQL Server 2008 Sp3 64 bit server with asynchronous mirroring on two databases. The mirroring was active and inactive continuously for more than 1 hour and suddenly the logins were timed out on principal server.
So now we are trying to find the root cause.
Any help.
2014-12-10 14:51:07.880 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:52:04.310 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:52:55.650 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:52:57.760 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:54:19.820 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:54:24.550 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:54:47.590 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:55:22.070 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-0000109C-0000'}).
This is an informational message only. No user action is required.
2014-12-10 14:55:42.520 Backup Log was backed up. Database: opale, creation date(time): 2010/03/06(08:36:00), first LSN: 3689101:41595:1, last LSN: 3689101:56840:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-0000109C-0000'}).
This is an informational message only. No user action is required.
2014-12-10 14:55:59.680 Backup Log was backed up. Database: opaleGmao, creation date(time): 2010/06/29(16:37:36), first LSN: 2925:158:1, last LSN: 2925:160:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-0000109C-0000'}).
This is an informational message only. No user action is required.
2014-12-10 14:56:44.210 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:57:15.630 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:58:21.590 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:58:26.690 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:59:13.700 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 14:59:14.360 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:02:57.610 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:03:00.790 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:05:12.290 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:05:12.290 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:05:12.290 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:05:20.880 spid17s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:05:20.880 spid17s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opale" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:05:20.880 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:05:27.160 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:05:28.990 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:06:34.870 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00000954-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:06:46.360 Backup Log was backed up. Database: opale, creation date(time): 2010/03/06(08:36:00), first LSN: 3689101:56840:1, last LSN: 3689101:59770:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00000954-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:07:00.970 Backup Log was backed up. Database: opaleGmao, creation date(time): 2010/06/29(16:37:36), first LSN: 2925:160:1, last LSN: 2925:162:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00000954-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:08:46.420 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:09:10.970 spid270 Error: 18056, Severity: 20, State: 29.
2014-12-10 15:09:10.970 spid270 The client was unable to reuse a session with SPID 270, which had been reset for connection pooling. The failure ID is 29. This error may have been caused by an earlier operation failing. Check the error logs for failed
operations immediately before this error message.
2014-12-10 15:09:14.150 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:10:00.480 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:10:54.230 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:11:21.600 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:12:20.080 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:12:20.080 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:14:46.840 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:15:20.320 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:15:20.320 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:17:42.800 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:19:31.640 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:20:14.340 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:20:41.920 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:20:41.920 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:20:48.890 spid17s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:20:48.890 spid17s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opale" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:21:49.320 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:22:02.610 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:22:33.170 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-000016F0-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:23:06.950 Backup Log was backed up. Database: opale, creation date(time): 2010/03/06(08:36:00), first LSN: 3689101:59770:1, last LSN: 3689101:77104:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-000016F0-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:23:23.960 Backup Log was backed up. Database: opaleGmao, creation date(time): 2010/06/29(16:37:36), first LSN: 2925:162:1, last LSN: 2925:164:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-000016F0-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:23:29.140 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:23:29.140 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:23:37.940 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:24:29.800 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:26:18.620 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:26:29.890 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:26:29.890 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:27:14.050 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:28:45.470 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:31:49.750 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:31:49.760 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:32:50.710 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:36:38.300 spid17s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:36:38.300 spid17s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opale" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:36:41.770 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:36:41.770 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:36:41.780 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:38:04.570 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:39:30.040 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:39:30.060 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:39:32.280 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:40:03.970 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00002190-0000'}).
This is an informational message only. No user action is required.
Thanks

Hi Ajay,
As your description, you come across the login timeout issue in database mirroring. This issue could occur due to the network errors, such as TCP link time-outs, packet errors. Besides the link (Mirroring time out) from SequelMate, I recommend you to check
if there is any packet loss or errors in your network connection.
Before detecting packet errors, you could enable a hidden setting in Windows to show you any possible errors with your connection and make a quick registry change as the following steps.
1. Press Win key+R to bring up the Run box and type regedit to launch the Windows registry editor.
2. Navigate to the following registry location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\Connections\StatMon
If the StatMon key is not there, right click on Connections, select New -> Key and enter the value as StatMon.
3. Inside the StatMon key, set the ShowLanErrors DWORD value as 1 if it’s already there. If ShowLanErrors is not there, right click on StatMon and select New -> DWORD value. Set the DWORD value name as ShowLanErrors. Double click on ShowLanErrors and
set the value data as 1.
4. Open Network and Sharing Center >> Click Change adapter settings >> Right click your network connection >> Select Status. You will now see an additional Errors information in your connection status below the Sent and Received Bytes.
For more information about the process, please refer to the article:
https://www.raymond.cc/blog/detect-packet-errors-in-your-network-lan-connection-status/.
If you find packet errors, you could fix the issue according the article:
http://www.ehow.com/how_8546105_fix-loss-packet-error.html
Regards,
Michelle Li

Root cause for class oracle/jpub/runtime/dbws/DbwsProxy does not exist

Hi,
I am trying to use UTL_DBWS to call a webservice, adn getting a error " ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist "
its going back and forth between me and operations , I aske them to load the package but still the script fails. Is there any way to confirm whether the package is loaded , like the below script
as sys:
select status from all_objects where
dbms_java.longname(object_name)='oracle/jpub/runtime/dbws/DbwsProxy';
Please help to find the root cause

Please check if you have the grants on UTL_DBWS.

The root cause for the case that "cannot close labview-generated exe file"

Hi All, I have a big program including a lot of things. When I converted it to an exe file, it cannot be closed properly. I used to load the dynamic vi in this program and cannot close it by clicking "X" of the window. Now I have removed that dynamic load but still cannot close the exe. Could anyone give me some advice? Thank you!

Hi Freelance_LV, thank you for your advise, here is a program for a USB dongle. Here are the answers:
for now, questions:
1. how are you closing the EXE? Panel close (X) on the top right corner/stop or exit button on the GUI?
[A] I use (X) on the top right corner but it did not work. But when I use exit button on the GUI it worked.
2. Or are you using a FP Close invoke node?
[A] No
3.how are you handling the event for Panel close or for Stop/exit button?
[A] events are inside a sequence frame
how many loops are running in parallel inside the EXE?
[A] It is hard to tell. I am not the original creator of this code, but the main structure is this: a big "for" loop, inside there are some sequence frame, and some events in one of the frame.
how are you stopping those loops when the panel is closed or a Stop/Exit button is pressed.
[A] the main loop inlcudes some events, sequence frame, and something like this. And there is a subvi from some previous people's work to close USB.
have you checked if all the loops are closing when you stop the EXE?
[A] Sorry I don't know how to check all the loops are closed.
does this work well when you run the source code?
[A] yes source code can be always be closed well.
have you checked for any errors when yuo stop your EXE?
[A] sorry I don't know how to check for errors?
when you say it cannot be closed properly, there could be two things:
1. the front panel/GUI does not close and it stays there. you cannot perform any GUI actions, or it seems to have hung.
[A] Yes GUI still there. But cannot perform any GUI actions.
2. the GUI closes but you can still it in the task bar below, you will have to use the Task manager to force close the executable.
[A] Not this case.
Thank you very much!

V890 ran out of swap space cause for Oracle Database curruption.

We have Oracle running on V890 which was crashed due to low swap space and didn't find any hardware issue with the server.
Even after database crash 7gb is showing in use.
and there is absolute no use of swap space on this server
bash-3.00# uname -a
SunOS oracle-a01-00 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V890.
last pid: 18804; load avg: 0.05, 0.05, 0.04; up 16+18:16:30 08:19:11
95 processes: 94 sleeping, 1 on cpu
CPU states: 99.9% idle, 0.0% user, 0.1% kernel, 0.0% iowait, 0.0% swap
Memory: 32G phys mem, 25G free mem, 56G total swap, 56G free swap.
Can someone help us to find root cause for this issue???
Thanks
Ravi

Sorry this took so long. Here is part of the alert log. I am sorry it is so long. This sequence is repeated over and over again. I am only guessing, but does the fourth to last line suggest that one of the redo files is corrupted, again, because the machine ran out of space?
ORA-600 signalled during: alter database open...
Mon Sep 19 10:48:48 2005
Restarting dead background process QMN0
QMN0 started with pid=12
Mon Sep 19 10:54:51 2005
Restarting dead background process QMN0
QMN0 started with pid=12
Dump file d:\oracle\admin\orcld\bdump\alert_orcld.log
Mon Sep 19 10:42:49 2005
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Sep 19 10:42:51 2005
alter database mount exclusive
Mon Sep 19 10:42:56 2005
Successful mount of redo thread 1, with mount id 2931047851
Mon Sep 19 10:42:56 2005
Database mounted in Exclusive Mode.
Completed: alter database mount exclusive
Mon Sep 19 10:42:56 2005
alter database open
Mon Sep 19 10:42:57 2005
Beginning crash recovery of 1 threads
Mon Sep 19 10:42:57 2005
Started redo scan
Mon Sep 19 10:43:00 2005
Errors in file d:\oracle\admin\orcld\udump\orcld_ora_2652.trc:
ORA-00600: internal error code, arguments: [kcratr1_lostwrt], [], [], [], [], [], [], []

To cancel logs in SM35 and find the root cause

Hi,
The role "PM****" is creating lot of sessions with the same session name and each session has hundreds of logs everyday in SM35. The logs is all about scheduling maintenance plans. There are hundreds of maintenance plans scheduling logs everyday. Can anyone help me how to find the root cause for this problem and stop the logs being generated in SM35?

Hi,
When you schedule RISTRA20 (transaction IP30) there are options for 'log control', check these and decide what level of logging you require.
-Paul

When I type any website like wikipidia or linkedIn that has initial page names as Home, I am going to some unknown website. It is happening for many other websites like yahoo, timesofindia, etc. Please help me, because I am unable to find root cause.

When I type any website like wikipidia or linkedIn that has initial page named as Home, I am going to some unknown website. It is happening for many other websites like yahoo, timesofindia, etc. Please help me, because I am unable to find root cause.

Apple does not give away its products.
Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
That is yet another FaceBook SCAM.

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Stock showing in Schedule for Delivery

Dear Experts,
Stock is showing in schedule for delivery, but i donot now the particular STO?
How to find that STO and delete the same?
Veeresh

You can check that STO in me80fn or yrv38. Or you can see the open delivery for the same using VL06O. Once you find the STO, you have to first delete the delivery, and then put the deletion indicator for that material in the STO, so that the stock which was blocked is released...
Reward, if helpful...
Noopur

Building and deploying J2EE apps ? Now there is a solution for production root cause analysis.

Is your organization building and deploying J2EE apps? If so, Halo
can help solve one of the toughest issues facing enterprises today:
Finding the root cause of software faults.
"Halo monitors, pinpoints, reports on and provides a source-code level
root cause of software faults in deployed J2EE apps. Halo is unique
because it's the only technology that can give you a root cause
diagnosis in a fully deployed, live production application. Halo has
such low performance overhead that customers deploy their final,
production versions of their applications with Halo enabled.
Used with Web Application Servers like WebLogic, Halo helps ensure
that deployed code is reliable and able to be quickly fixed if
problems turn up. Most important, because Halo is an "always on"
technology, you get all the information you need to rapidly solve a
problem on the first fault. Problem replication and bug reports are
obsolete with Halo
"Halo has a unique ability to provide a root cause diagonosis and
understanding
of software problems in production systems, without needing to
replicate the
issue.
Test on WebLogic proved that Halo runs with extremely low overhead and
is suitable for use in deployed production systems"
Andrew Sliwkowski, Software Engineer
BEA Systems, Inc.
The key is Halo's high performance, low overhead TraceBack
instrumentation technology. Based on technology out of MIT and proven
in the field, TraceBack enables you to instrument JARs, EARs and WARs
within minutes, without touching source code.
Halo is useful throughout the entire application life cycle, from
development through test, beta and deployment.
If you have interest in learning more visit our website at
www.incer.com or email me directly at [email protected] (Rick Martin)

I have two questions. We have just started developing apps using jdev9i, 9iAS v2 and are new to the j2ee environment so my questions may be very easy ones.
Question 1: We have set up Oracle pooling connection to our databases. We have a development, test and production database. When I deploy my application, it includes the connections. This is preventing me from moving the EAR files from dev to test to prod without modification and re deploying to my EAR file. Is there a way or a place that I can put my database connections that will not be included in my EAR files and the application still find them?datasources.xml is where the info regradings connection to databases is licated. If you're using 9iAS
you can use EM to create datasource entry at the global level. In OC4J standalone you could use admin.jar
or edit the file. Check out the standalone user's guide at http://otn.oracle.com/tech/java/oc4j/pdf/oc4j_so_usersguide_r2.pdf.
Also, you will othe OC4J docs on OTN.
Question 2: I have a stand alone oc4j set up for our developers to use while testing their applications. The applications include libraries supplied in jdev such as xml parser v2. I do not want to deploy those lib files with the app because I will have to redeploy all my apps if I upgrade jdev. I just want to be able to upgrade the libraries, test the apps and not have to redeploy everything. I can do this by coping the jdev lib to 9iAS but I can't seem to find the right place to put the lib for the stand alone oc4j instance. You can use the library tag within application.xml for server wide availability. Check out the article
http://otn.oracle.com/oramag/oracle/02-sep/o52oc4j_2.html specifically class loading in OC4J section
Any help would be greatly appreciated. Thanks in advance.

Tools for root cause analysis of stack corruption?

I'm experiencing extremely rare stack corruption that results in SEGV core dumps for a large and complex C++ program. Having run all the standard tools such as IBM Rational Purify, Sun mdb/libumem and dbx/rtc (although unfortunately using dbx check -access takes inordinately long and eventually crashes before the main() function is executed), I am no closer to discovering the root cause of the stack corruption. I'm confident based on the tools run and on the stack trace from the core dump that the problem is not heap corruption, but stack corruption.
The environment is Sun Studio 12 (but not update 1) on Solaris 10 on SPARC. The program is compiled with minor optimisation (-xO2 -xbuiltin=%all).
Is anyone aware of other tools or approaches that could help pinpoint the problem? Your help would be much appreciated!
Thanks in advance,
Simon

If you are in fact having stack corruption issues, I don't think any of the tools you mentioned other than Purify would help you identify it.
You may also be simply running out of stack space, and not having corruption issues. Is your app multi-threaded? If so, you could increase the stack size your threads use to something larger than the default.
Another thing you can look for are syslog entries stating "no swap space to grow stack" for your process, you've run out of virtual memory. To avoid this, you can "pre-allocate" your stack memory with code similar to this:
void growStack( size_t bytes )
    char *mem = ( char * ) alloca( bytes );
    memset( mem, 0, bytes );
    return;
}That code, when called, will force the creation of stack memory virtual pages backed by swap, before your server gets into a situation where free memory might be in short supply.
I also seem to recall that Solaris under certain circumstances will allocate stack memory with the MAP_NORESERVE option, which means swap space won't be reserved for your stack. If your process gets swapped out, its stack(s) will be lost and you'll probably get a SIGSEGV or SIGBUS. See this bug:
[http://bugs.opensolaris.org/view_bug.do?bug_id=1221729|http://bugs.opensolaris.org/view_bug.do?bug_id=1221729]
I remember working a similar issue for a customer running large apps on Sun E15Ks, maybe about 5 years ago. To work around this behavoir, I think you'll need to explicitly allocate stack memory for any threads you may be creating. I think that's what we had to do.

Material showing in schedule for delivery when complete stock is been issue

Hi Gurus,
A Material in stock overview report (MMBE) under
unrestricted stock showing as 480 qty in one batch and under schedule for
delivery showing 480 qty in different batch. I checked in stock
requirement list (MD04) it is showing the open delivery for 480 qty.
On checking the particular delivery document found
that the delivery quantity is issued completely for the same batch, which
is showing in stock overview report (MMBE).
I am unable to understand, when the delivery qty is
issued completely, why it is showing under schedule for delivery.
Because of this it’s not allowing to issue the
unrestricted stock.
Thanks in advance.
With regards
deepti

Hi Deepti,
if i have understand your question correctly then its something like you have unrestricted qty and some open delivery order(no PGI) created.....in this case deepti system is working fine becoz the blocked qty by open delivery order will reflect in unrestriced and thats correct as well....and its not lying...let me explain u by e.g
say u have unrestricted qty 500kg and open Delivery order created of say 200 KG(no PGI ) done...in this case if u see MMBE then ur unsrestriced qty will be 500 kg only and when u double click on plant u will see 200 kg for scheduled...remember in this case when u try to create new sales order system will allow for max 300kg as 200 is blocked by old order....thats the way system works and it should work..
Let me know whether this help..and and reward pts and reply back if u get the solution thr this
Regards
Jagdish

Issue Root Cause Question - WebIntelligenceProcessingServer

Hi,
Yesterday our SAP BI based portal server suffered a dramatic decrease of perfomance that prevented reports to be viewed (users were able to login into portal, but when clicked on a given report it showed the clock progress bar with no results..) . We finally decided to restart all the servers in order to try to workaround the situation. Luckily it works but I am focused in trying to understand what cause the issue.
We have been reviewing the performance counters of all involved servers (CPU, Memory consumption) duing the period of time when the issue appeared and we don't find any quick explanation. Our more intersting clue are the info contained in the BO server tace files (*.glf files) , and particularly the WebIntelligenceProcessingServer trace.
At the time of the issue (and several minutes before) the next list of errors were triggered repeteadly
**ERROR:cdzContext:ExtensionManagementException has been raised [cdzContext.cpp;1193]
**ERROR:cdzContext:All the servers with CMS es-w08-bient1:6400, cluster @es-w08-bient1.f4e.org:6400, kind pjs which host service DSLBridge, are down or disabled [cdzContext.cpp;1194]
**ERROR:DSLBridgeController:BrigdeController::getDslBridge : the IExtension reference is null [src/DSLBrigdeController.cpp;157]
**ERROR:DSLBridgeController:Error: Failed to load SL Service extension
I suspect that we have some configuration issue related with the WebIntelligenceProcessingServer but by reviewing the data provided by the monitoring application (Memory max threshould count,....) we don't see which would be the cause of the stuff.
Any idea? Thanks for sharing your thoughs.
Alfons

Hello Alfons,
Finding root cause of the issue is really a part of investigation as there are many other components/areas we need to consider/review before we comment anything on your issue.
However, here are some practices we need to follow for better performace.
It's recommended to have Web Intelligence servers recycle. There are two settings that are used in this functionality. The Web Intelligence server is recycled when BOTH conditions are met.
Maximum Documents Before Recycling: default is 50. Range is 10 - 1000.
Timeout Before Recycling (seconds): default is 1200. Range is 100 - 10000.
In addition to this, kindly tune your WIPS as reccomended by SAP. For more information, please go through below blog:
http://scn.sap.com/people/matthew.shaw/blog/2011/04/06/performance-tips-getting-the-most-out-of-your-web-intelligence-processing-servers
Hope this will help.
Regards,
Mahesh

Render Service Problem - Root Cause ALC-DSC-127-000

I have decided to write a Form Guide renderer instead of using one from the Samples. The renderer process was created by carefully observing the one in the samples. After creating the renderer, I activated it and used it in my process. In the livecycle workspace, when I try to access the initialization task, A popup error shows up. Looking at the logs revealed the following error/exception:
exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
2007-12-26 13:34:23,190 INFO [STDOUT] [Flex] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = render
clientId = 60F1A10E-C009-251A-6C47-179779FEB2B7
destination = task-actions
messageId = F65756D8-8D22-85D3-598E-17BBDA529B7E
timestamp = 1198694062784
timeToLive = 1198694062784
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = 60F1373F-590F-5AC8-B6A5-1296C747EA45
exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
2007-12-26 13:34:23,377 INFO [STDOUT] [Flex] [ERROR] Root cause: ALC-DSC-127-000: com.adobe.idp.dsc.LongLivedInvocationException: The Long Lived Service i3Renderer can not be invoked synchronously.
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:76)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 0)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.service.TaskManagerServiceImpl.renderForm(TaskManagerServic eImpl.java:3404)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:282)
at sun.reflect.GeneratedMethodAccessor258.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:

Hi Gary,
I am getting following error message, can you pls help me with this
Mar 26, 2008 5:25:53 PM com.adobe.workspace.processes.ProcessActions getProcessInstance
WARNING: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = getProcessInstance
clientId = DA923519-C11F-EDFE-A537-D10A27A3FA00
destination = process-actions
messageId = A9726928-7AEA-8308-B7C4-ECFB90EFA472
timestamp = 1206566753361
timeToLive = 1206566753361
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = DA8DF62D-CD1E-2718-618C-0902E3DF178A
exception: flex.messaging.MessageException: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] [ERROR] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = getProcessInstance
clientId = DA923519-C11F-EDFE-A537-D10A27A3FA00
destination = process-actions
messageId = A9726928-7AEA-8308-B7C4-ECFB90EFA472
timestamp = 1206566753361
timeToLive = 1206566753361
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = DA8DF62D-CD1E-2718-618C-0902E3DF178A
exception: flex.messaging.MessageException: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] Root cause: com.adobe.idp.taskmanager.dsc.client.query.TaskQueryServiceException: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:730)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapter_z73hg_ELOImpl.doS upports(EjbTransactionCMTAdapter_z73hg_ELOImpl.java:67)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:80)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 3)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerQueryService.processSearch(TypedTask ManagerQueryService.java:245)
at com.adobe.workspace.processes.ProcessActions.getProcessInstance(ProcessActions.java:174)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
Caused by: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.pof.schema.POFAbstractObjectType.getAttribute(POFAbstractObjectType.java:177)
at com.adobe.pof.omapi.POFDefaultQuery.projectAttribute(POFDefaultQuery.java:634)
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:627)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapter_z73hg_ELOImpl.doS upports(EjbTransactionCMTAdapter_z73hg_ELOImpl.java:67)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:80)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 3)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerQueryService.processSearch(TypedTask ManagerQueryService.java:245)
at com.adobe.workspace.processes.ProcessActions.getProcessInstance(ProcessActions.java:174)
[Flex] [ERROR] Root cause: com.adobe.idp.taskmanager.dsc.client.query.TaskQueryServiceException: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:730)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.ad

Root cause for delivery to show up on LX47 transaction

Similar Messages

Maybe you are looking for