Root dir od DB is 70% full.

Hi,
We are using EBS 12.0.6 and DB (10.2.0.3).
Here is the dir info's:
[oracle@appsdb]$ df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 4.9G 3.2G 1.5G 69% / --------------------------------------------------> Look at this root dir.
/dev/sda2 270G 161G 96G 63% /backup
/dev/sda1 190M 12M 169M 7% /boot
/dev/sda3 247G 160G 75G 69% /d01
none 4.0G 0 4.0G 0% /dev/shm
/dev/sda8 3.9G 51M 3.7G 2% /home
/dev/sda5 15G 6.4G 7.4G 47% /usr
//backup.silhon.com/ProdDbDaily
577G 460G 117G 80% /backup/dailyappsdb
I have checked there is dir /usr/tmp in this dir there is sofl link named tmp which dipict to /var/tmp.
The size is this dir is as below:
oracle@appsdb]$ du -sh /usr/tmp/ ----------------> it's contains files named like OPMLOG*
1000M /usr/tmp/
[oracle@appsdb ]$ du -sh /var/tmp/ ----------------> it's contains files named like OPMLOG*
1000M /var/tmp/
Should I delete these file from OS , because my root dir is near to filled up???
thx

Hi,
I have checked the following dir /var/spool/mail contains oracle file.
here is the size of this file and its contains like following infor's:
should I remove all lines in oracle file log?
Size:
[oracle@appsdb mail]$ ll
total 1803272
-rw-rw---- 1 backup mail 0 Jan 6 2009 backup
-rw-rw---- 1 erp mail 0 Sep 6 2008 erp
-rw-rw---- 1 backup mail 0 Sep 21 2008 kiani
-rw-rw---- 1 oracle mail 1843832063 Jan 28 06:35 oracle
-rw------- 1 root root 902433 Jan 28 04:02 root
[oracle@appsdb mail]$ du -sh oracle
1.8G oracle
[oracle@appsdb mail]$ pwd
/var/spool/mail
file contains: (First and last 50 lines of oracle file)
[oracle@appsdb mail]$ head -50 oracle
From [email protected] Sun Sep 21 11:38:57 2008
Return-Path: <[email protected]>
Received: from localhost (localhost)
by appsdb.silhon.com (8.13.1/8.13.1) id m8LFcvSO009208;
Sun, 21 Sep 2008 11:38:57 -0400
Date: Sun, 21 Sep 2008 11:38:57 -0400
From: Mail Delivery Subsystem <[email protected]>
Message-Id: <[email protected]>
To: <[email protected]>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="m8LFcvSO009208.1222011537/appsdb.silhon.com"
Subject: Returned mail: see transcript for details
Auto-Submitted: auto-generated (failure)
Status: O
This is a MIME-encapsulated message
--m8LFcvSO009208.1222011537/appsdb.silhon.com
The original message was received at Sun, 21 Sep 2008 11:38:57 -0400
from localhost.localdomain [127.0.0.1]
----- The following addresses had permanent fatal errors -----
<[email protected]>
----- Transcript of session follows -----
550 5.1.2 <[email protected]>... Host unknown (Name server: servis.com: no data known)
--m8LFcvSO009208.1222011537/appsdb.silhon.com
Content-Type: message/delivery-status
Reporting-MTA: dns; appsdb.silhon.com
Received-From-MTA: DNS; localhost.localdomain
Arrival-Date: Sun, 21 Sep 2008 11:38:57 -0400
Final-Recipient: RFC822; [email protected]
Action: failed
Status: 5.1.2
Remote-MTA: DNS; servis.com
Last-Attempt-Date: Sun, 21 Sep 2008 11:38:57 -0400
--m8LFcvSO009208.1222011537/appsdb.silhon.com
Content-Type: message/rfc822
Return-Path: <[email protected]>
Received: from appsdb.silhon.com (localhost.localdomain [127.0.0.1])
by appsdb.silhon.com (8.13.1/8.13.1) with ESMTP id m8LFcvSO009206
for <[email protected]>; Sun, 21 Sep 2008 11:38:57 -0400
Received: (from root@localhost)
last 50 lines:
/d01/silprod/fazi.lst
/d01/silprod/stop.sh
/d01/silprod/looog.log
/d01/silprod/SILP_appsdb.env
From [email protected] Thu Jan 28 06:35:30 2010
Return-Path: <[email protected]>
Received: from appsdb.silhon.com (localhost.localdomain [127.0.0.1])
by appsdb.silhon.com (8.13.1/8.13.1) with ESMTP id o0S1ZUbq017284
for <[email protected]>; Thu, 28 Jan 2010 06:35:30 +0500
Received: (from oracle@localhost)
by appsdb.silhon.com (8.13.1/8.13.1/Submit) id o0S1Z1V0017223;
Thu, 28 Jan 2010 06:35:01 +0500
Date: Thu, 28 Jan 2010 06:35:01 +0500
Message-Id: <[email protected]>
From: [email protected] (Cron Daemon)
To: [email protected]
Subject: Cron <oracle@appsdb> . /d01/silprod/start.sh
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/home/oracle>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=oracle>
X-Cron-Env: <USER=oracle>
You are running sh version 120.1
Starting the database SILP ...
SQL*Plus: Release 10.2.0.3.0 - Production on Thu Jan 28 06:35:01 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2147483648 bytes
Fixed Size 1262812 bytes
Variable Size 503319332 bytes
Database Buffers 1627389952 bytes
Redo Buffers 15511552 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
sh: exiting with status 0
thx.
Edited by: user12007410 on Jan 28, 2010 1:58 AM

Similar Messages

SAPinst using root dir whec sapcar extracting files - hp-ux

I've been doing lots of hp.ux+oracle installations, but I'm facing a new problem. Im running sapinst and using and x-server for it.
The thing is that i'm receiving this error in step 4 of installation:
SAPCAR: error writing to /usr/sap/DEV/SYS/exe/run/ssfrfc (error 4). No space left on device). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/.
TRACE 2009-08-21 16:07:45.920 iaxxgenimp.cpp:1255
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
The thing is that /usr is not filled, the extract it's been doing on / (root), and running the installation as root.
Any suggestions?
Regards,
Felipe
Edited by: Felipe Andres Catalan Muñoz on Aug 22, 2009 12:16 AM

I added an screenshot with file systems sizes, as you can see there, root is full because sted 4 unpack sap archives is been doing on root dir
please help[http://img35.imageshack.us/img35/7075/errornlu.gif]
Edited by: Felipe Andres Catalan Muñoz on Aug 22, 2009 2:36 PM

Vsftpd root dir

I wan to set the root dir for the ftp server to /srv/ftp instead of the home dir of that user and want to allow anonymous access. I want to run a local ftp server for testing some app. Is there a easier alternative to vsftp.

I think vsftpd is a perfect mix of simplicity and possibilities.
Look at the entry in the Wiki and you see some hints. The options:
- create a unique user
- make that user the sole owner of /srv/ftp
- in the vsftpd.conf set it to chrooted and define the name of the user
To allow anonymous access isn't an issue. What you have to decide though is whether access includes rights to create directories and upload files (to upload anonymously is probably not such a good idea, if you don't implement some kind of quota).

Root dir of ClassLoader.getSystemResourceAsStream

Hi,
I'm using
ClassLoader.getSystemResourceAsStream("my.properties") to load a property file in JVM. Could
anyone tell me where should I put the file. I have tried
many locations, the root of all the classes, the dir of
the project file (I'm using JBuilder4.5), and the dir of jre.jar, but still can not read the file in.
Thanks a lot.
Jim

I place the properties file into the project root folder (one level above the main package folder) and use
ClassLoader.getSystemClassLoader().getResourceAsStream("my.properties");Hope that works for you,
Kurta

Reflow installation creating strange ps1, ps2, ps3, ps4 folders on the root dir of my secondary drive.

Some background info:
Win7 Pro, x64
I just got Adobe CC and did an install of a lot of the software on my C: system drive, which is a small SSD. The D: drive is a separate physical HDD. I then created symlinks for a lot of the software (besides PS, Illustrator, InDesign, and the smaller ones like all the "Edge" software) and moved those to my D: storage drive. Once again, to clarify, Edge Reflow and Photoshop are both still on the C: system drive where Adobe CC installed them originally.
After I installed Reflow, three folders got created on my D: drive, named: ps1, ps2, and ps3. Their folder structures are almost, if not completely, identical to each other:
A quick system-wide search of "reflow.generate" also identified another identical folder sitting inside my Photoshop CC directory at:
C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\Generator\reflow.generate
This folder has the same file/subfolder structure as the above.
I am wondering what the ps1, ps2, ps3 folders are and what they are doing sitting in my root D: drive directory. I tried uninstalling Reflow, after which those folders disappeared. I then reinstalled Reflow and they appeared again as p1, p2, and p4 (instead of p3). The other folder, within the Photoshop plugins folder, is back again also, as can be seen here:
I understand that these folders are part of the Adobe Photoshop / Edge Reflow generator plugin that I have watched a video of. What I do not understand is why I am getting these extra "ps" folders on my other drive. The only other thing I can think of that might help is that I have Photoshop's scratch disk set to the D: drive. Edge Reflow has not been ran at all since its own installation, however.
Are those "ps" folders safe to delete?
Thank you.

Hey Chris,
I just installed Edge Reflow Preview (CC), and I already had Photoshop CC 2014 installed, on Windows 7.
Reflow installed to:
C:\Program Files (x86)\Adobe\Adobe Edge Reflow CC Preview
The plugin installed itself correctly to:
C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\Generator\reflow.generate
And the installer also created:
D:\ps1\Generator\reflow.generate
D:\ps2\Generator\reflow.generate
D:\ps4\Generator\reflow.generate
Looking at the installer log in C:\Program Files (x86)\Common Files\Adobe\Installers\Edge Reflow 1.0 08-21-2014.log.gz
08/21/14 18:50:44:133 | [INFO] | | OOBE | DE | | | | 2300 | Action start 18:50:44: AppSearch.
08/21/14 18:50:44:133 | [INFO] | | OOBE | DE | | | | 2300 | Property: PHOTOSHOP_PLUGIN_DIRECTORY, Signature: DirectorySearch1
08/21/14 18:50:44:133 | [INFO] | | OOBE | DE | | | | 2300 | Property: PHOTOSHOP_PLUGIN_DIRECTORY_32, Signature: DirectorySearch2
08/21/14 18:50:44:134 | [INFO] | | OOBE | DE | | | | 2300 | Property: CC2014PHOTOSHOP_PLUGIN_DIRECTORY, Signature: CC2014DirectorySearch1
08/21/14 18:50:44:134 | [INFO] | | OOBE | DE | | | | 2300 | Property: CC2014PHOTOSHOP_PLUGIN_DIRECTORY_32, Signature: CC2014DirectorySearch2
08/21/14 18:50:44:135 | [INFO] | | OOBE | DE | | | | 2300 | Action ended 18:50:44: AppSearch. Return value 1.
Taking a wild guess, I suspect the installer is looking for four Photoshop plugin directories, thus "ps1" - "ps4":
ps1 = PHOTOSHOP_PLUGIN_DIRECTORY
ps2 = PHOTOSHOP_PLUGIN_DIRECTORY_32
ps3 = CC2014PHOTOSHOP_PLUGIN_DIRECTORY
ps4 = CC2014PHOTOSHOP_PLUGIN_DIRECTORY_32
I only have Photoshop CC 2014 installed, so likely its plug-in directory is "CC2014PHOTOSHOP_PLUGIN_DIRECTORY", and thus there is no "D:\ps3" directory created.
And if that's the case, the other plugin folders do not exist, so for some strange reason the installer decides to install ps1, ps2 and ps4 to D:\
Again, just a guess.

Any restriction on Mac that binaries running from root dirs like /usr/libexec/ cannot load dylib's at run-time?

Hi all,
Is there any restriction on Mac OS X 10.6/10.7 that binaries running from root directories like /usr/libexec/ cannot load dylib's at run-time using dlopen() or NSAddImage()?
I am trying to run a binary like "sample" from a directory inside /usr/libexec/ which tries to load a dylib like "sample.dylib" which is present in the same directory as "sample".
It resulted in a segmentation fault with the following error and stack-trace.
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_INVALID_ADDRESS at address: 0x0000000000003430
0x0000000000003430 in ?? ()
Using gdb, I could find out that the program crashed inside dlopen() (the path passed to dlopen() being a simple filename like "sample.dylib").
The dlopen() at the top of the stack-trace pasted below gets called around 10 times; it does not crash during this 2nd level dlopen() any-time.
#0 0x00007fff81be9e93 in dlopen ()
#1 0x00007fff82838f7f in map_images_nolock ()
#2 0x00007fff82821bc0 in map_images ()
#3 0x00007fff5fc039b9 in __dyld__ZN4dyldL18notifyBatchPartialE17dyld_image_statesbPFPKcS0_jPK15dyld_imag e_infoE ()
#4 0x00007fff5fc0c839 in __dyld__ZN11ImageLoader4linkERKNS_11LinkContextEbbRKNS_10RPathChainE ()
#5 0x00007fff5fc04d48 in __dyld__ZN4dyld4linkEP11ImageLoaderbRKNS0_10RPathChainE ()
#6 0x00007fff5fc08f68 in __dyld_dlopen ()
#7 0x00007fff81be9ec0 in dlopen ()
#8 0x000000010002694f in AAA ()
#9 0x0000000100026730 in XXX ()
#10 0x0000000100026494 in YYY ()
#15 0x00000001000566a9 in main (argc=7, argv=0x7fff5fbff810) at ../../main.c:50
After this 2nd level dlopen() gets called 10-15 times, the stack will unwind from map_images_nolock () till __dyld_dlopen (). But when it tries to finish all the instructions inside __dyld_dlopen () and step out of it, the program crashes with the EXC_BAD_ACCESS signal.
Please find below the final stack-traces obtained during debugging when I put breakpoints for AAA() and dlopen() and went on stepping inside till the program crashed.
(gdb) bt
#0 0x00007fff5fc04d48 in __dyld__ZN4dyld4linkEP11ImageLoaderbRKNS0_10RPathChainE ()
#1 0x00007fff5fc08f68 in __dyld_dlopen ()
#2 0x00007fff81be9ec0 in dlopen ()
#3 0x000000010002694f in AAA ()
#4 0x0000000100026730 in XXX ()
#5 0x000000010002663c in YYY ()
#11 0x00000001000566a9 in main (argc=7, argv=0x7fff5fbff7f0) at main.c:50
(gdb) step
Single stepping until exit from function __dyld__ZN4dyld4linkEP11ImageLoaderbRKNS0_10RPathChainE,
which has no line number information.
0x00007fff5fc08f68 in __dyld_dlopen ()
(gdb) bt
#0 0x00007fff5fc08f68 in __dyld_dlopen ()
#1 0x00007fff81be9ec0 in dlopen ()
#2 0x000000010002694f in AAA ()
#3 0x0000000100026730 in XXX ()
#4 0x000000010002663c in YYY ()
#10 0x00000001000566a9 in main (argc=7, argv=0x7fff5fbff7f0) at ../../main.c:50
(gdb) step
Single stepping until exit from function __dyld_dlopen,
which has no line number information.
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_INVALID_ADDRESS at address: 0x0000000000003430
0x0000000000003430 in ?? ()
To summarise:
For some reason, a user wants to install a product and its binaries under /usr/libexec/.
This binary tries to dynamically load a dylib using dlopen("sample.dylib", RTLD_LAZY | RTLD_LOCAL).
It looks like, the dynamic linker then opens dependent dylibs and runs module initialisers. Then crashes when returning (which sounds like a trashed stack).
Can anyone please tell me whether there is some OS-imposed restriction or OS bug which can explain this type of behaviour?
(Note: The crash does not occur if the binary and dylib are installed under a normal user's home directory and run from there.)
Many thanks,
Vinay

The otool output for the binary and dylib are pasted below.
localhost:Latest dev$ otool -L /usr/libexec/Dipu/sample/sample
/usr/libexec/Dipu/sample/sample:
/System/Library/Frameworks/IOKit.framework/Versions/A/IOKit (compatibility version 1.0.0, current version 275.0.0)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 476.18.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.4.0)
/usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.4)
localhost:Latest dev$ otool -L /usr/libexec/Dipu/sample/sample.dylib
/usr/libexec/Dipu/sample/sample.dylib:
libProduct.dylib (compatibility version 1.0.0, current version 1.0.0)
/System/Library/Frameworks/Carbon.framework/Versions/A/Carbon (compatibility version 2.0.0, current version 136.0.0)
/System/Library/Frameworks/IOKit.framework/Versions/A/IOKit (compatibility version 1.0.0, current version 275.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.4.0)
/usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.4)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 476.18.0)

Why every virtual terminal always starts at root-dir, not ~

when i log in on a normal terminal ( ctrl-alt-f1 ~ ctrl-alt-f6), i'm in my home directory
but when i'm on a virtual terminal like gnome-terminal, i'm always in root directory, no matter it's a loggin shell or not
even including Gvim
thx
Last edited by treblih (2010-06-05 13:03:18)

You probably need to read http://www.catb.org/~esr/faqs/smart-questions.html
You need to describe in details what is you problem, how you start a terminal? You question dont make sense (where in the world is gvim a virtual terminal???)
Last edited by kazuo (2010-06-05 12:53:11)

SAXParserFactory attempting fetch of services file from httpd root dir

Background: I have a small applet that uses the java plug-in. This applet displays a navigation tree for my intranet site. The applet is archived in a jar file. The applet fetches an XML file from the hosting server and then uses JAXP SAX2 parser to convert the XML data into the tree. My parser factory creation follows the examples on this site:
SAXParserFactory factory = SAXParserFactory.newInstance();
According to the documentation on SAXParserFactory, it looks in four places for the concrete class to use for the parser factory:
- Use the javax.xml.parsers.SAXParserFactory system property.
- Use the properties file "lib/jaxp.properties" in the JRE
directory.
- Use the Services API (as detailed in the JAR specification), if
available, to determine the classname. The Services API will look
for a classname in the file
META-INF/services/javax.xml.parsers.SAXParserFactory in jars
available to the runtime.
- Platform default SAXParserFactory instance.
I let the platform default be selected and the applet runs fine.
The problem is that with every access to the page, I get the following entries in the access and error logs for my apache server (with JRE 1.4.1_01 and 1.4.2):
access:
xxx.xxx.xxx.xxx- - [27/Jun/2003:09:06:43 -0700] "GET /META-INF/services/javax.xml.parsers.SAXParserFactory HTTP/1.1" 404 258
error:
[Fri Jun 27 09:06:43 2003] [error] [client xxx.xxx.xxx.xxx] File does not exist: XXX/meta-inf/services/javax.xml.pars
rs.SAXParserFactory
I don't have a services file in the jar file for the applet because I wanted it to use the platform default.
Is anyone else seeing this behavior? Is there a workaround without having to hardcode a concrete class path into a services file embedded in the jar?
Thanks in advance,
Paul

It's looking to find out which SAX parser you want it to use. You can specify that any number of ways (system property, service provider, etc.).
See:
http://developer.java.sun.com/developer/EJTechTips/2003/tt0311.html#1
and
http://java.sun.com/j2se/1.4.2/docs/guide/jar/jar.html#Service%20Provider
for more information.

Root File system is reporting that it's full [SOLVED]

My root file system is reporting as full, and I'd like some ideas on how to track the problem. I've tried a number of things like searching for the largest directory, searching for the largest file, and all that jazz. I'm obviously missing something. /dev/sda3 should be at 50%.
One note. The computer started what seemed like normal today. I converted my second hard drive to ext4, rebooted, and started to notice that things that needed the /tmp directory couldn't start. I made some quick space to get operational by removing 56M of stuff from pacman's cache, but that's a quick hack. I don't know if this is related or not. I am running testin

skottish wrote:
MoonSwan wrote:
You're a dork who solved this issue and will know better next time. How is this a bad thing? I'm sure someone around here has done worse Skottish, so don't feel too stupid. (Won't name names but I'm sure as well that I've done worse somewhere...)
In the meantime, while you're down...*bonks skottish with the dork-stick*
Thanks for the kind words MoonSwan.
This happened because of the way my system is set up. I have rsync making backups of /home and /etc to /backup on close. It turns out that rsync created the /backup directory instead of using the existing one. Why? Because /dev/sdb1 wasn't mounted when I restarted after the conversion. Doh!
no shame in that. i totally freaked out once when i was still in school because i couldn't find a paper that was due. turned out i had /home unmounted when i saved the file, but had /home mounted when i went looking for it.
it was hiding under the mounted filesystem the whole time!

Tree control - How to get the full path of selected Item in tree control

I am Flex newbie. When the user clicks the particular item in
the tree control I just wanted to get it name along with it's full
parent.
Here is my XML
var dirXML:XML=<root basename="/home/tcegrid">
<Directories>
<Dir Name=".autosave" />
<Dir Name=".emacs.d" />
<Dir Name="AnsysDistributed">
<Dir Name="opt"/>
<Dir Name="root" />
</Dir>
<Dir Name="postgres"/>
<Dir Name="FineTurbo"/>
<Directories>
</root>
The above XML is data provider for Tree control. When the
user clicks the Dir Name called opt. I wanted it absolute path in
XML. say Directories.Dir.Dir.@Name is opt
Can any one tell me how to get this?

"Thamizhannal" <[email protected]> wrote in
message
news:gam9q8$4es$[email protected]..
>I am Flex newbie. When the user clicks the particular
item in the tree
>control
> I just wanted to get it name along with it's full
parent.
> Here is my XML
> var dirXML:XML=<root basename="/home/tcegrid">
> <Directories>
> <Dir Name=".autosave" />
> <Dir Name=".emacs.d" />
> <Dir Name="AnsysDistributed">
> <Dir Name="opt"/>
> <Dir Name="root" />
> </Dir>
> <Dir Name="postgres"/>
> <Dir Name="FineTurbo"/>
> <Directories>
> </root>
>
> The above XML is data provider for Tree control. When
the user clicks the
> Dir
> Name called opt. I wanted it absolute path in XML. say
> Directories.Dir.Dir.@Name is opt
> Can any one tell me how to get this?
loop until the parent() property of the XML node is empty.
HTH;
Amy

Root CA-How can I set my server the single CA in my own intranet?

I have some confidential network(without any internet connection).
How can I generate FULL certificate chain with my own CA (without requesting any external certificate)? Software is Solaris 9 (Sparc) & SunONE Portal Server.
Sincerely.
Yurry A. Buharkin

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<welcome-fiile-list>
<welcome-file>over.jsp</welcome-file>
</welcome-file-list>
</web-app>
please see the above.
i have saved my jsp files in the root dir of webapps. in c:/tomcat/webapps/root/web_inf/web.xml , the content of this web.xml is as shown above.... but it still dont work .... how i can i rectify this problem.
really thanks a lot

Root ( / ) file system incresing

root@sfms2 # df -k
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d10 30257446 28379345 1575527 95% /
/dev/dsk/c2t0d0s3 8072333 1259615 6731995 16% /usr
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
/dev/dsk/c2t0d0s5 8072333 1108327 6883283 14% /var
swap 10070400 104 10070296 1% /var/run
swap 10076632 6336 10070296 1% /tmp
/dev/dsk/c2t0d0s4 8072333 1300420 6691190 17% /opt
/dev/did/dsk/d9s6 482775 4815 429683 2% /global/.devices/node@2
/dev/md/sfms-dg/dsk/d102
74340345 1284885 72312057 2% /oracle
/dev/md/sfms-dg/dsk/d101
132184872 44097490 86765534 34% /sfms_data1
In my root file system ./proc incresing after some intervals. My root dir going to full. Tell me any solution to resolve this problems.???

Uh, no. /proc can't increase in your root filesystem because /proc is not part of your root filesystem. 'du' descends and crosses filesystem boundaries by default.
Run this:
du -dk / | sort -n > /tmp/root_du.sort
The bottom few lines of that file will show the largest directories in the filesystem. You may find some sort of log file or some hidden directory you were unaware of. What are they?
Darren

How to get the root directory of a domain?

I have a domain setup at
C:\bea\user_projects\domains\myDomain
I have tried the following;
Getting the domain object : get attr DomainConfiguration from DomainRuntimeServiceMBean
Get root dir : get attr RootDirectory from domain object
It returns ".", but I need the full path.
Is there an issue with the RootDirectory from domain object or in my approach?

John,
OK. If you want to go the JMX route, have a look at the CurrentDirectory attribute of the ServerRuntime mbean. It would report your directory as this:
C:\bea\user_projects\domains\myDomain\.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

SQL Server 2008 R2 Installation Media Root Directory location for XP SP3?

Where is the SQL Server 2008 R2 Installation Media director? This question asks during a 'new installation or add features to an existing installation'. The installation media root directory is not indicated under 'options'. I trying side-by-side
installation next to SQL Server 2008 Express Edition.
It appears that C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2 (where 1033_ENU_LP, Resources, and x86 dirs are installed) is the installation media root directory, but is is not a valid folder.
Also tried copying the 1033_ENU_LP, Resources, and x86 dirs from the C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2 into a directory that I created in c:\2008R2installationDir, and then running setup.exe, but still do not have
an installation media root dir specified under options.

There is no DVD; SQLServer2008R2SP2-KB2630458-x86-ENU.exe was downloaded. This problem occurs when setup.exe is run, after running *ENU.exe to download the files. Specifying the directory where the
SQLServer2008R2SP2-KB2630458-x86-ENU.exe doesn't help.
>>It doesn't seem like any instances have been installed, yet. Nothing shows up under Administrative Toos | Services. Under Start | Microsoft SQL Server 2008 R2 , there are two choices: Configuration Tools and Documentation&Tutorials.
Hello,
What seems to me that you have downloaded SP2 for SQL server 2008 R2(SQLServer2008R2SP2-KB2630458-x86-ENU.exe ).And as you say you dont find any thing under SQL 2008 r2.So i guess that is why SP2 installation is not moving
ahead.Can you download SQL server 208 R2 setup again and install database engine and ither fetures with client tools.And then you can move ahead with SP2 installation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

[SOLVED]Root file system changed

I'm currently using ArchLinux
I'm not sure what went wrong, but now when I login as root and "cd" I don't see the root file system. Instead i see
[root@aspect ~]# ls -al
total 36
drwxr-x--- 7 root root 4096 Apr 13 16:29 .
drwxr-xr-x 17 root root 4096 Apr 13 08:18 ..
-rw------- 1 root root 2849 Apr 13 16:27 .bash_history
drwxr-xr-x 2 root root 4096 Apr 13 10:35 .config
drwx------ 3 root root 4096 Apr 13 10:34 .dbus
-rw------- 1 root root 49 Apr 13 10:35 .directory
drwxr-xr-x 3 root root 4096 Apr 13 10:34 .kde4
drwxr-xr-x 3 root root 4096 Apr 13 10:35 .local
drwx------ 3 root root 4096 Apr 13 16:29 .nv
If I cd to ".." I can see the root file system from there.
Also When I drag files into terminal, it can't locate them. I Used a java folder I had in downlaods as an example. But it's like this everywhere.
[aspect@aspect ~]$ file:///home/aspect/Downloads/jre bash: file:///home/aspect/Downloads/jre: No such file or directory
Last edited by aspectratio (2015-04-13 22:05:33)

ewaller wrote:
aspectratio wrote:I've already done all of this. What makes you think I was running KDE as root?
drwxr-xr-x 3 root root 4096 Apr 13 10:34 .kde4
Sometime today a hidden directory containing kde files was created in the /root being owned by root. That's how
So the problem here is I came from debian. And aparently there when you cd as root, it will bring you to the atual file system.
Fair enough.
I was told to edit /etc/passwd and change the root dir to just / from /bin/bash
Now I can no longer login as root. I will try to boot recue mode and chroot into the system to fix the file.
That would be the way to fix it. You may not need to actually chroot, just mount the root partition at /mnt and edit /mnt/etc/passwd.
As to not running desktop environments as root -- it is a pet peeve of mine. I am not saying this about you, you understand the issue; but I have had arguments with people in the past about not running GUI DEs as root, and them insisting on it being their machines and they can do what they want. They are absolutely correct. But they can also fend for themselves.
Edit: If you do have another user in wheel, and if wheel can gain root privileges, just log in as that user and use sudo to fix it.
Yeah it's a security risk.
I've fixed the file. But I'm just not sure why I can't drag and drop paths anymore. It apears as though it's not a common thing anyways.

Root dir od DB is 70% full.

Similar Messages

Maybe you are looking for