Root file showing Internal FQDN instaed of External

I followed the Mobility guide located here:
http://social.technet.microsoft.com/wiki/contents/articles/10386.how-to-configure-lync-server-2010-mobility-service.aspx
in order setup Mobility services for Lync 2010.
When navigating to the following lyncdiscover URL to obtain the root file it is showing reference to an internal FQDN instead of the External. I believe this is causing mobile clients to not connect in.
https://lyncdiscover.xyzdomain.com/Autodiscover/AutodiscoverService.svc/root/user
Following output:
{"AccessLocation":"Internal","Root":{"Links":[{"href":"https:\/\/lync.xyzdomain.com\/Autodiscover\/AutodiscoverService.svc\/root\/domain","token":"Domain"},{"href":"https:\/\/lync.xyzdomain.com\/Autodiscover\/AutodiscoverService.svc\/root\/user","token":"User"}]}}
I am not sure how to resolve this but I have read this may have an issue with how the Web Services are published. Any help on this topic would be greatly appreciated.
Thanks - Robert

Hi Robert,
The DNS record LyncDiscover should be pointed to the external FQDN. Please try to change it and publish the topology again, then run step 2- Setup or Remove Lync Server Components after the changing in topology.
Please run the command: Get-CsMcxConfiguration to return information about all the Mobility Service configuration settings currently in use in your organization and check if any incorrect setting you have done.
Please also run Set-CsMcxConfiguration –ExposedWebUrl External to make sure the ExposedWebUrl used by the Autodiscovery Service is accessible to users both inside and outside the organization firewall
If the issue persists, you can use the Lync server logging tool to test the process of meeting, then you will find the error step of issue.
Here is the link of using the Lync logging tool:
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Transfering Music Files From Internal Hard-drive to External Drive

Per the instructions in a Missing Manual Book, I copied my itunes music folder from my internal drive to my new, portable external drive. The files copied fine, but the book said all I needed to do to insure file recognition was to change the location in the itunes>preferences>advanced location, which I did. But the only way the files are recognized by itunes is to, song by song, direct itunes to the new file. Is this really the only way to have it recognize the files? Is there no automatic method? The book implies that all is needed is changing the preferences location.

I'd make sure that the 'Keep iTunes folder organised' setting is on. (Preferences>Advanced>general)
Failing that, make sure that the 'Copy files to iTunes music folder when adding to library' setting is also on.

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

Files show as corrupted in LR 5, when stored on an external HD

Basically, the title sums it up. I was running out of space on my 500GB laptop HD, so I decided to start saving RAW files to an external 1TB HD. Immediately, the files started showing up as corrupted when viewed in Develop module. Only a few at first, but it got progressively worse - to the point of 80% corrupt and unusable.
I thought this was a HD problem. So I went ahead and bought a second HD (2TB) and started saving files there. Same problem. Now, when I try to save the same files to the laptop HD - no problem, all is well (as it has always been before; the issue was space).
I was willing to allow for it to be the external drive problem. But what are the chances that TWO external hard drives in a row will be problematic (especially when everything else on them is fine)? Not high, I reckon.
So I am trying to wrap my mind around it and it drives me mad - I cannot work, I don't know what is going on and I have no idea what to do... It cannot be the camera - again, the same files are fine when saved to the internal HD. It cannot be the SD card - I am using several, from different companies and bought at different times, and again, the files are fine in the internal drive. It cannot be the external drive failure - I tried two in a row, and everything else on those drives is fine. But when viewed in LR 5, those files on external drives show up as corrupted. I am losing my mind!
I would much appreciate any help and input. I have no idea where to turn with this - it is not computer problem per se, and there is no "Lightroom repair" that I know of...
Thanks for looking at this!

Thank you for replying. That is right, I am quite suspicious of memory - my laptop is full to the brim and I suspect that this may affect available memory and cause some problems in LR. Unfortunately, I don't know enough about computers to be certain.
The card reader - quite simple: the card reader is the same, whether I save the files to the internal or external drives. I put the SD card in it, then copy the files and paste them where I want them. When done, I then open the LR and synchronize the folder. When I copy and paste files to the internal drive, the images look fine in LR; when I copy and paste them into the external drive, 80% of them come up visually corrupted in LR. Since the same card reader is used in both cases, and the files are OK when saved internally, I am assuming it is not the card reader.
So, basically, when I became aware of the problem, I tried copying and saving the same file both internally and externally from the card reader, in order to verify what was going on. That is how the same file (more than one, actually) ended up on three different drives.
Right now, my instinct is to copy everything to an external drive and clear some space on the internal one. I am very apprehensive though - what if something is causing file corruption on the external drives - in that case I will be corrupting everything when I migrate the files. Hence my previous question - are the files actually corrupted, or do they simply appear corrupted in LR because of memory issues? As I said, I don't know enough about this to be certain and do not know what to do.

Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

FM????? Text file to Internal table in Background

Hi,
I need to execute my prog in background and as per my req i need to dwnload a file from prsentation server to internal table for processing. I'm not sure whch FM to use to dwnload from text file to internal table. I cannot use GUI_UPLOAD FM for background runs.....pls help
Thanks in advance

Chesat,
You can not work for this requirement.You will have an idea on it.
Introduction
The use of FTP from ABAP seems to have been a hot topic on the ABAP Forums of late. I thought I might sit down and document whatever I could find on this subject and share it as a weblog.
Over the years I have seen lots of different solutions for moving files on and off of a SAP system. I have seen external FTP scripts written in OS shell languages. I have seen full blown custom applications that are made to interface to the SAP system. However I think you will find that most of the technology you need to perform a simple FTP from ABAP is already contained in the standard system. All of my examples and screen shots will be coming from a 46C system.
SAP's Solution
If you have ever taken a look at the kernel directory of your SAP system, you might have noticed an interesting little executable: sapftp.exe (the name of the file on Windows SAP Kernels). It is this part of the Kernel that exposes FTP functionality to the ABAP Programming language.
So you have a suspicion that there is FTP functionality in ABAP, but youre not quite sure how to use it. Where do you start? I always turn to the Service Marketplace first. A quick search on SAPFTP reveals there is an entire component (BC-SRV-COM-FTP) on the subject. The most general note and our starting place is OSS Note 93042. This note starts off with a nice description of what SAPFTP is: A client RFC application that is accessed via RFC from ABAP. But we also find out that in addition to SAPFTP being part of the kernel, it is also part of the SAPGui. That means that we can perform FTP commands originating from our R/3 Server or from a Client Workstation.
Well if this solution is accessed via RFC, then we must have to setup some RFC destinations. In fact we have two that we need; SAPFTP for Front-end FTP and SAPFTPA for access on the application server. Luckily we don't even have to mess with setting these RFC destinations up in SM59. SAP has supplied a program, RSFTP005, to generate the destinations for us.
Now before we go off and start written code on our own to hit these FTP functions, why don't we make sure everything is setup and working. Once again SAP has helped us out by providing us with a test program, RSFTP002. (In case you are wondering the FTP functionality and many other test programs are all contained in SAP Development Class SFTP). When we run this test, we get a set input parameters for the server, username password, etc. We want to start out simple and just make sure we are getting a connection. Therefore we will just execute the pwd command (Print Working Directory).
Your answer back should look something like this:
If you are wanting to see a list of FTP commands, try using the command HELP in place of PWD:
If something did go wrong during the test, I suggest that you active the trace option in SM59 for the FTP Destination. You can then use program RSFTP001 to display the current trace file.
Programming the FTP
Not only does the RSFTP002 program give us a test environment, but it also provides us with a programming example. We can see that the FTP functionality is really provided by a set of function modules all within the SFTP Function Group. We have the basic commands such as FTP_CONNECT, FTP_COMMAND, and FTP_DISCONNECT that can be strung together to create a complete file operation action. The FTP_COMMAND Function allows you to issue arbitrary FTP commands as long as the SAPFTP function, the Host, and the Destination server all support the command. Then you have the specialized functions such as FTP_R3_TO_SERVER, FTP_R3_TO_CLIENT, and FTP_CLIENT_TO_R3. This lets you take some data in memory and transfer it someplace else. This has the advantage of not having to write the data to the file system first and not to have to issue any FTP commands. However these functions are also limited to the scope described.
If you are already familiar with FTP in general, working with these function modules should not seem to difficult. The Connect, Command, Disconnect actions would seem somewhat self explanatory. So instead of looking at the entire program in detail let's focus on two things that may be unfamiliar. First the program starts off with an ABAP Kernel System call to AB_RFC_X_SCRAMBLE_STRING. Well we don't want to pass a potentially sensitive password openly. Therefore the FTP_CONNECT function module requires that the password be encrypted before it receives it. It is this System call that performs that one-way encryption. Now I checked a 620 SP42 system and in this example, SAP has replace the AB_RFC_X_SCRAMBLE_STRING with a function call to HTTP_SCRAMBLE. Unfortunately HTTP_SCRAMBLE doesn't even exist in my 46C system. The only other thing that I wanted to point out about these function calls is the exporting parameter on the FTP_CONNECT. It passes back a parameter called handle. This handle then becomes an importing parameter to all subsequent calls: FTP_COMMAND and FTP_CLOSE. This handle is the pointer to the instance of FTP that we started with the FTP_CONNECT. This assures that we get reconnected to the same FTP session with each command we issue.
FTP Development
I thought I would share a few of the things that can be built using this FTP functionality. First off I didn't want a bunch of ABAP programs directly working with the SAP FTP Function modules. As you can see there is already a difference in the examples for encrypting the password between 46C and 620. Therefore I thought it would be best to encapsulate all the FTP function in one custom ABAP OO Class. Not only did I get the opportunity to hid the inner SAP functionality and make it easy to switch out during upgrades, but I also get consistent error handling as well. I accept the User Name, Password, Host, and RFC Destination in during the Constructor of the class. I then store these values away in Protected Attributes. Each function module is then implemented as a Instance Method. The Password encryption functionality is then all tucked away nicely in the class. Also the calling program doesn't have to worry about keeping track of the FTP handle either since it is an instance attribute as well.
Next I got really carried away. I wanted a way to record entire FTP scripts that could be filled with values at runtime and ran as a step in a background job. My company used to have many interfaces that ran frequently sending files all over the place. We needed a mechanism to monitor and support these file moves. This was really the root of this tool, but it also gives you an idea of how powerful these functions can be.
Closing
I hope that anyone interested in FTP from ABAP will find this resource useful. If anyone has any other resources that should be included here, feel free to post them.
Thomas Jung is an Application Developer for Kimball Electronics Group (www.kegroup.com) and a huge fan of ABAP.
Comment on this weblog
Showing messages 1 through 7 of 7.
Titles Only
Main Topics
Oldest First
     New to SAP/ABAP-4
2005-02-24 13:03:06 Thomas Godfrey Business Card [Reply]
I've been in IT for over 30 years as a mainframe contract programmer/analyst. Recently a company hired me for my legacy knowledge of there business to become a developer on SAP for these same systems.
My first task is to develop a generalized ftp application to send data to the mainframe and then on to financial institutions. I have created an ABAP/4 test program with literals for the dest/host etc. And it works fine. I need more detail/guidance in creating the Class/Method/Function you have described to make this parameter driven and callable by other programs. I know this is a lot to ask, any help in pointing me in the right direction would be greatly appreciated. When I mention class creation to the existing staff they all say "Oh, we don't use or know anything about that object oriented stuff, we just right programs."
Thanks,
Tom
     New to SAP/ABAP-4
2005-02-24 13:13:33 Thomas Jung Business Card [Reply]
"we don't use or know anything about that object oriented stuff" That's something I might have expected to hear 4 years ago. That's kind of like saying that you only want to use half of the programming lanuage (the old half at that).
However it is true that you have to learn to walk before you run. There are some fundamentals to ABAP that are usefull to have down before you start in with ABAP OO. But I wouldn't let that hold you back for long.
I'm afraid that I wouldn't be able to teach you everything you would need to know to create a function module or a class in this posting. There was a nice weblog that was just posted the other day that had the steps to create your first simple class. I suggest you start there.
As far as my FTP class goes, I don't mind sending you the code for the class. My email address is already all over SDN (and spammers' lists) so just send me the address that you want the details sent to. My email is [email protected].
     New to SAP/ABAP-4
2005-02-24 13:05:42 Thomas Godfrey Business Card [Reply]
I just read what I typed, I meant "write programs" not "right programs" ... duh
     Good suggestions - now...
2004-11-24 09:15:27 Jacques Claassen Business Card [Reply]
...any chance you've used FTP via an HTTP proxy?
Any help using the HTTP* functions in the ZFTP function group will be greatly appreciated. Any one?
Thx
     Good suggestions - now...
2004-11-24 09:59:11 Thomas Jung Business Card [Reply]
I'm afraid I haven't done either. However I have used the HTTP client functionality in the WebAS 620 (if_http_client) along with an HTTP proxy. I have an example of this in another weblog.
     Pretty insightful
2004-11-15 19:27:26 Subramanian Venkateswaran Business Card [Reply]
Thanks for this weblog, and I can be pretty sure there are some(many) more weblogs in the waiting.
Regards,
Subramanian V.
     I have been using a local include ...
2004-11-15 16:29:39 Swapan Sarkar Business Card [Reply]
On the other hand I have been using a local include of ZCL_FTP_BASE in my programs for some time. Here's the signature:
<quote>
*& Include ZHR9_FTP_CLASSES
*& Utility class ZCL_FTP_BASE having all the
functions to upload and download files from an
FTP server.
CLASS zcl_ftp_base DEFINITION.
PUBLIC SECTION.
Output file type
TYPES: BEGIN OF t_scratch,
data(1024) TYPE c,
END OF t_scratch,
t_str_tab TYPE STANDARD TABLE OF t_scratch.
CONSTANTS: co_crlf(2) TYPE x VALUE '0D0A'.
DATA: status TYPE c VALUE space.
METHODS: constructor IMPORTING im_user TYPE string im_pwd TYPE string
im_server TYPE string,
send_table_data IMPORTING im_file TYPE string
im_table TYPE t_str_tab,
get_table_data IMPORTING im_file TYPE string
EXPORTING ex_table TYPE t_str_tab,
send_string_data IMPORTING im_file TYPE string
im_string TYPE string,
get_string_data IMPORTING im_file TYPE string
EXPORTING ex_string TYPE string,
disconnect.
PRIVATE SECTION.
DATA: v_user(64) TYPE c,
v_pwd_clear(30) TYPE c,
v_pwd(64) TYPE c,
v_server(30) TYPE c,
v_filename TYPE rlgrap-filename,
v_handle TYPE i.
METHODS: pwd_scramble IMPORTING im_pwd TYPE c.
ENDCLASS. "ZCL_FTP_BASE DEFINITION
</quote>
Showing messages 1 through 7 of 7.
Pls. mark if this doc. is useful

I moved files off my computer to an external hard drive now time machine won't back up like it used to. It says there is not enough room.

My hard drive was completely full (mostly with pictures) so I moved several years worth of photos from the hard drive to an external hard drive I regularly use with the laptop. (Basically my master copies of all my photos back to 1997) I have always had Time Machine set up to back up both the laptop AND that external drive. It's always worked seamlessly until I moved those files. Time Machine has been full for a while now and regularly gives me a message that the oldest files will be deleted. That's fine.
I don't understand why moving files from the laptop to the external hd would now cause the following message (not an exact quote): Time Capsule cannot complete backup. You need 233 gb to backup and time capsule only has 107 gb available. If time capsule was already set to backup up both the laptop and the external hd, why would moving those photos from one hd to the other cause a space issue? It should equal out. And now when I look at the files on the time capsule, it only shows me a recent backup and a partial incomplete backup. None of the older backups are visible anymore. I have not deleted anything directly from the time capsule so I'm thinking somehow the index got damaged. How can I fix this? The error message says to change the settings but I really don't know what settings to change. Help!!

It does not immediately delete the files that are missing.. it merely tries to backup the new files it has discovered on the external drive. Since you moved the files there, the backup at least for a while will contain both copies.. and that is why it doesn't have enough space to backup.
Fixing the problem.. hmm pondini is the expert.. you should be able to delete the backup of the photos in existing backup.. there are instructions to do it.. but it is a very poor way to do things.
Much better. .archive off the existing backup.. this is long and slow but worth it. you need a usb drive of the same size as the TC drive. Then erase the TC and start a fresh set of backups.
The alternative is to use the USB drive as a new target.. but it is much slower than the TC internal drive.
http://pondini.org/TM/12.html

Internal Hard Drive Backup + External Hard Drive Backup

Hi everyone and thanks for your attention.
My question is about Backup for two different hard disk.
I've got an internal 500 gb hard disk and a 4 tb external hard disk and my computer is a Macbook pro 15 Unibody 10.6.8.
I need daily (or better hourly) back up for the internal and the external. On the internal I've got system and applications, on the external my work project folders.
My solution at the moment are two other hard disk raid mounted as backup drives. They form together 5tb back up space. I'm using time machine, so it manage my internal 500 gb disk and my external 4tb disk together.
Today I had to recover my system from Time Machine. The app is recovering the documents, but I have a doubt. Before starting recovering I had to choose the hard drive where to recover the system. I had to decide between the internal and the external, and I've chosen the internal, because the OS was installed there.
Will Time Machine put the files, that were on the internal drive, in the internal drive and the ones that were on the external on the external?
My complete back up is 2.4 tb so my 500 gb won't surely be enough.
Moreover. I'm assuming that is so much better to divide the back up. One backup system for the internal and one for the external. It seems to me that my version of Time Machine (10.6.8) does not allow to assign different back up drive for different is use drive. Eg. an external drive to use for the internal drive and another external drive for the external drive in use.
What about next Time Machine versions?
Or maybe would be better to use Time Machine for the internal drive with an external drive as back up, and the use an another application such as Carbon Copy Cloner to back up the external drive to another different external drive.
To be more clear, the solution I'd like to have is:
Internal Drive (500 gb) > time machine > External Drive (1tb)
External Drive (4tb) > Carbon Copy Cloner > External Drive (5tb)
Thanks a lot!
Nicola

The best source for those questions, Nicola, is the Pondini Tips Page, and then go to the specific sections of his website which has everything there is to know about Time Machine.

How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive

How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive

You can use a program like Carbon Copy Cloner. It will clone your HD to the external. The format is the same as your internal drive and you can boot from it using Option key at boot time.
http://www.bombich.com/
Regards,
Captfred

ITunes 10.0.1 no longer has Command-R shortcut to open root file of a song!

I can not believe that iTunes 10.0.1 no longer has the Command-R shortcut to open root file of a song! I use this function constantly as I am a television music supervisor who frequently emails or FTP sends music cues from composers and artists of mine to my tv shows. I use this to function to bring music cues into Toast, to see how I have files titled, etc. If anyone at Apple can log this as a potential fix for a future update, there is important functionality in this for some of us! Thank you.

Yes, much thanks dknightd! I too use it all the time & I thought they just got rid of it; they probably changed it to make room for a new shortcut... odd that they just changed it all the sudden like that, without replacing it with something more often used. I guess we'll just have to wait & see! Anyway, thanks for the post about the new shortcut!

Downloading files from PC to Mac via external hard drive

I have already downloaded the files from my PC to an external hard drive. I have connected that external hard drive to my iMac and am attempting to bring those files onto my iMac, but don't know how. Can anyone help? I have it connected, but it seems to be showing up at my Time Machine Backup and I can locate any of the files from my PC.

Hi and welcome to Discussions,
here are several ways to migrate your PC files http://support.apple.com/kb/HT2518
but it seems to be showing up at my Time Machine Backup and I can locate any of the files from my PC
I am not sure if I understand that one correctly.
Does your external harddisk comes up as a Time Machine backup in OSX ?
Or is Time Machine asking if you want to use that external harddisk for backup ?
Regards
Stefan

I cannot get files from my desktop to my external hard drive

Does anyone have any information on why my external hard drive would not be allowing me to move files from my computer to my external hard drive? I have a Seagate Free Agent external hard drive. It has 1TB of space that is no where near being used. It will show up on the desktop when I plug it in, but i cannot move anything to it. Also, I have a few movies on the external hard drive that I cannot view for some reason. Does anyone have any input on why that could be? It gives me the pop up window that says "a required codec isn't available." Any onformation will be very helpful. Thank you in advance for your help.

leemamacita wrote:
i have tried to transfer files from my mac to my external hard drive but i just couldn't.. help me
More information would help. How is the external connected? Does the external appear on your Desktop? Has the external been formatted for a Mac? What method do you use to transfer files? When you try to move a file to the external, what does happen?

Best Practice on Not Exposing your internal FQDN to the outside world

Exchange server 2010, sits in DMZ, internet facing. The server is currently using the Default Receive Connector. This exposes the internal fqdn to the outside world (ehlo). Since you should not (can't) change the FQDN on your Default Receive connector, what
is the best practice here?
The only solution I can see is the following:
1. Change the Network on the Default Receive Connector to only internal IP addresses.
2. Create a new Internet Receive Connector port 25 for external IP addresses (not sure what to put in Network tab?) and use my external FQDN for ehlo responses (e.g. mail.domain.com)
3. What do I pick for Auth and Permissions, TLS and Annoymous only?
Michael Maxwell

Yes, it fails PCI testing/compliance. I shouldn't be able to see my internal server and domain. I understand that is the recommendation, but my client doesn't want to host in the cloud or go with a Trend IHMS (trust me I like that better, but its
not my choice). I have to work with the deck of cards dealt to me. Thanks, just want a solution with what I have now.
Michael Maxwell
Understand. I wont go into the value of those tests :)
If the customer is really concerned about exposing the internal name, then create a new receive connector with a different FQDN ( and corresponding cert) for anonymous connections as you mention above. Know that it also means internal clients
can connect to the server on port 25 as well if you dont have the ability to scope to set of ip addresses ( i.e. a SMTP gateway).
The internal names of the servers will also be in the internet headers of messages sent out:
http://exchangepedia.com/2008/05/removing-internal-host-names-and-ip-addresses-from-message-headers.html
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2007/SecurityMessageHygiene/HowtoremoveinternalservernamesandIPaddressesfromSMTPheaders.html
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

How do i transfer my movie files from my mac to my external hard drive

i want to move some video files from my desktop to my external hardrive, never dont it before need help

What Mac OSX version?
Regardless, you open the folder containing the video files, then click/drag those files from their current location to the hard drive icon on your Desktop.
If your desktop does not show the external drive, post back for how to make it show up.

Root file showing Internal FQDN instaed of External

Similar Messages

Maybe you are looking for