Root pass problem
im having a little problem with a centos machine i just set up... i seem to did something wrong when i entered the password, or im just plain stupid and forgot which i entered, either way, i was thinking if its possible to do something about it , at least with a livecd or whatever you can think of.
I just dont want to resintall the whole thing, its a P2 450 and it takes its time to install... but if there is no other way i dont care, as i didnt got to configure anything.
Gullible Jones wrote:
D'oh!
(Hmm... That's a local vulnerability! Any way of disabling editing of the boot line from within GRUB?)
No, that's not a local vulnerability. A local vulnerability would be a user account escalating privelidges. This is considered "Game Over". If an attacker has physical access to your machine, then disabling this would mean nothing. When I forget the root password, I just boot any live distro, mount /dev/hda1 or wherever I can find /etc/, and just edit the passwd file. Hell, you can even do it with an old slack install CD, or a mini distro that you can fit on a credit card sized CD.
Similar Messages
-
Root pass and key layout problems
Hello. There are two problems. The first is that when I use 'sudo' in terminal it is accept only my normal user password, not root??? Some programs like Shaman require root password.
And the second problem - my layout. I have 'us' and 'ru' layouts. It is working by click to keyboard indicator, but when I press Alt+Shift, both Alt's or Win key (there is my config) is nothing happens. I have only original EN locale - maybe the problem is it?
Last edited by noMaster (2009-07-06 02:24:53)I was having problems with E17 after a fresh install (mixer problem, key bindings, etc), and I fixed it by deleting the configuration files at
~/.e
as the wiki says. -
Dreamweaver 8 root site problem
I recently upgraded to version 8 from MX. My root site is on
my network storage, and never had a problem with MX. My image paths
are all wrong and now have just broken link placeholders. After
doing a little resaerch, I mapped a drive to my site folder, and
now the images are back IN DREAMWEAVER. My problem now is when I
pre-view a page in a browser (F12), the image links are broken
again...... any thoughts would be greatly appreciated.Actually, the two dots mean "go up a level". The first link
is a root
relative link, and it's the leading slash that refers to the
root.
> It seems the two periods are missing indicating the root
folder, but I
> would
> rather not go through my entire site adding ../. I'm
perplexed as to why
> this
> happens in version 8 and not in MX.
It would happen in both, if you have temp files disabled in
both. No doubt
you had them enabled in MX and not in DW8. Check your Preview
in Browser
preferences.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"wencie" <[email protected]> wrote in
message
news:e28hkm$omi$[email protected]..
> for the images that won't pre-view => img
> src="/image_125/581999LargeLockside125.jpg"
>
> for images that do pre-view => img
> src="../image_125/spacer_green_125.gif"
>
> It seems the two periods are missing indicating the root
folder, but I
> would
> rather not go through my entire site adding ../. I'm
perplexed as to why
> this
> happens in version 8 and not in MX.
> -
Root.sh problem grid infrastructure 11g
Hi all,
I am about to install grid infrastructure 11g (11.2.0.1) on RHEL5.5 64 bit where i use VMware platform which is VMware server 2 on Windows2008 Server. I am pretty sure that i followed the installation instructions but i cannot get rid of the following error which occurs while i am running the root.sh.
You can also find errors in the oraagent_oracle.log and orarootagent_root.log at the end of the post. There are communication errors at the end of the both log files but they dont give any clue to me or my knowledge is not enough to understand why crs is complaining.
maybe this is a known issue or somebody can understands what grid infrastructure is angry about. thanks for any effort.
[root@eprhel5 grid]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/product/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-11 13:33:06: Parsing the host name
2011-01-11 13:33:06: Checking for super user privileges
2011-01-11 13:33:06: User has super user privileges
Using configuration parameter file: /oracle/product/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'eprhel5'
CRS-2672: Attempting to start 'ora.mdnsd' on 'eprhel5'
CRS-2676: Start of 'ora.mdnsd' on 'eprhel5' succeeded
CRS-2676: Start of 'ora.gipcd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'eprhel5'
CRS-2676: Start of 'ora.gpnpd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'eprhel5'
CRS-2676: Start of 'ora.cssdmonitor' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'eprhel5'
CRS-2672: Attempting to start 'ora.diskmon' on 'eprhel5'
CRS-2676: Start of 'ora.diskmon' on 'eprhel5' succeeded
CRS-2676: Start of 'ora.cssd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'eprhel5'
CRS-2676: Start of 'ora.ctssd' on 'eprhel5' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'eprhel5'
CRS-2676: Start of 'ora.crsd' on 'eprhel5' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 9e1cc3ad1ba64f8ebf8142118e68c819.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 9e1cc3ad1ba64f8ebf8142118e68c819 (/dev/sdc1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'eprhel5'
CRS-2677: Stop of 'ora.crsd' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'eprhel5'
CRS-2677: Stop of 'ora.asm' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'eprhel5'
CRS-2677: Stop of 'ora.ctssd' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'eprhel5'
CRS-2677: Stop of 'ora.cssdmonitor' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'eprhel5'
CRS-2677: Stop of 'ora.cssd' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'eprhel5'
CRS-2677: Stop of 'ora.gpnpd' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'eprhel5'
CRS-2677: Stop of 'ora.gipcd' on 'eprhel5' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'eprhel5'
CRS-2677: Stop of 'ora.mdnsd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'eprhel5'
CRS-2676: Start of 'ora.mdnsd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'eprhel5'
CRS-2676: Start of 'ora.gipcd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'eprhel5'
CRS-2676: Start of 'ora.gpnpd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'eprhel5'
CRS-2676: Start of 'ora.cssdmonitor' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'eprhel5'
CRS-2672: Attempting to start 'ora.diskmon' on 'eprhel5'
CRS-2676: Start of 'ora.diskmon' on 'eprhel5' succeeded
CRS-2676: Start of 'ora.cssd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'eprhel5'
CRS-2676: Start of 'ora.ctssd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'eprhel5'
CRS-2676: Start of 'ora.asm' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'eprhel5'
CRS-2676: Start of 'ora.crsd' on 'eprhel5' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'eprhel5'
CRS-2676: Start of 'ora.evmd' on 'eprhel5' succeeded
CRS-0184: Cannot communicate with the CRS daemon.
PRCR-1070 : Failed to check if resource ora.asm is registered
Cannot communicate with crsd
add asm ... failed
clsr_start_dg return error at loc: 70 rc=0
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Create failed, or completed with errors.
create diskgroup DATA ... failed
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Add failed, or completed with errors.
Command return code of 1 (256) from command: /oracle/product/grid/bin/crsctl add type ora.registry.acfs.type -basetype ora.local_resource.type -file /oracle/product/grid/crs/template/registry.acfs.type
add ora.registry.acfs.type ... failed
PRCR-1070 : Failed to check if resource ora.net1.network is registered
Cannot communicate with crsd
add scan=crs-scan ... failed
Preparing packages for installation...
cvuqdisk-1.0.7-1
Configure Oracle Grid Infrastructure for a Cluster ... failed
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 2047 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /oracle/oraInventory
'UpdateNodeList' was successful.
[root@eprhel5 grid]# cd bin
[root@eprhel5 bin]# ./crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
orarootagent_root
2011-01-11 13:40:55.831: [ AGFW][2555229616] Starting the agent: /oracle/product/grid/log/eprhel5/agent/crsd/orarootagent_root/
2011-01-11 13:40:55.831: [ AGENT][2555229616] Agent framework initialized, Process Id = 21314
2011-01-11 13:40:55.832: [ USRTHRD][2555229616] Utils::getCrsHome crsHome /oracle/product/grid
2011-01-11 13:40:55.833: [ USRTHRD][2555229616] Process::convertPidToString pid = 21314
2011-01-11 13:40:55.833: [CLSFRAME][2555229616] Inited lsf context 0x19f395f0
2011-01-11 13:40:55.833: [CLSFRAME][2555229616] Initing CLS Framework messaging
2011-01-11 13:40:55.833: [CLSFRAME][2555229616] New Framework state: 2
2011-01-11 13:40:55.833: [CLSFRAME][2555229616] M2M is starting...
2011-01-11 13:40:55.835: [ CRSCOMM][2555229616] m_pClscCtx=0x19f8c7e0m_pUgblm=0x19f90190
2011-01-11 13:40:55.835: [ CRSCOMM][2555229616] Starting send thread
2011-01-11 13:40:55.835: [ CRSCOMM][1147201856] clsIpc: sendWork thread started.
2011-01-11 13:40:56.064: [ COMMCRS][1113643328]clsc_connect: (0x1a028f90) no listener at (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_IPC_SOCKET_11))
2011-01-11 13:40:56.064: [ CRSCOMM][2555229616][FFAIL] Could not connect to (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_IPC_SOCKET_11)) ret = 9
2011-01-11 13:40:56.064: [CLSFRAME][2555229616] Failure at IPC connect to server:2
2011-01-11 13:40:56.064: [CLSFRAME][2555229616] Unable to start module-to-module comms: 1
2011-01-11 13:40:56.065: [ AGFW][2555229616]Created alert : (:CRSAGF00120:) : Agent Framework failed to start:1
2011-01-11 13:40:56.065: [ AGFW][2555229616] Agent is exiting with exit code: 1
oraagent_oracle
2011-01-11 13:40:55.757: [ AGFW][1940628912] Starting the agent: /oracle/product/grid/log/eprhel5/agent/crsd/oraagent_oracle/
2011-01-11 13:40:55.757: [ AGENT][1940628912] Agent framework initialized, Process Id = 21308
2011-01-11 13:40:55.764: [ USRTHRD][1940628912] Utils::getCrsHome crsHome /oracle/product/grid
2011-01-11 13:40:55.764: [ USRTHRD][1940628912] Process::convertPidToString pid = 21308
2011-01-11 13:40:55.765: [CLSFRAME][1940628912] Inited lsf context 0x8844b00
2011-01-11 13:40:55.765: [CLSFRAME][1940628912] Initing CLS Framework messaging
2011-01-11 13:40:55.765: [CLSFRAME][1940628912] New Framework state: 2
2011-01-11 13:40:55.765: [CLSFRAME][1940628912] M2M is starting...
2011-01-11 13:40:55.770: [ CRSCOMM][1940628912] m_pClscCtx=0x8849aa0m_pUgblm=0x884d2c0
2011-01-11 13:40:55.770: [ CRSCOMM][1940628912] Starting send thread
2011-01-11 13:40:55.770: [ CRSCOMM][1152039232] clsIpc: sendWork thread started.
2011-01-11 13:40:55.782: [ CRSCOMM][1940628912][FFAIL] Could not connect to (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_IPC_SOCKET_11)) ret = 9
2011-01-11 13:40:55.782: [CLSFRAME][1940628912] Failure at IPC connect to server:2
2011-01-11 13:40:55.782: [CLSFRAME][1940628912] Unable to start module-to-module comms: 1
2011-01-11 13:40:55.782: [ AGFW][1940628912]Created alert : (:CRSAGF00120:) : Agent Framework failed to start:1
2011-01-11 13:40:55.782: [GIPCXCPT][1940628912] gipcShutdownF: skipping shutdown, count 1, from [ clsnOraAgent.cpp : 82], ret gipcretSuccess (0)
2011-01-11 13:40:55.785: [ AGFW][1940628912] Agent is exiting with exit code: 1H,
in 11.2.0.2 you can simply continue running root.sh, since it uses internal checkpoints.
11.2.0.1 is a little bit more difficult, since you need to deconfigure the run (rootcrs.pl -deconfig -force) to restart root.sh.
Then when you did that, see this note for the further steps, how to call the missing assistants:
How to Proceed from Failed 11gR2 Grid Infrastructure (CRS) Installation (Doc ID 942166.1)
Regards
Sebastaian -
The Script root.sh problem - ora.asm and ASM and Clusterware Stack failed
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. On step 9 of 10 - execute script /u01/app/grid/root.sh for 2 VMs rac1 and rac2.
After run root.sh in rac1 successfully. I run root.sh in rac2 and get an error as below:
[root@rac2 grid]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= ora11g
ORACLE_HOME= /u01/app/grid
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2012-03-05 16:32:52: Parsing the host name
2012-03-05 16:32:52: Checking for super user privileges
2012-03-05 16:32:52: User has super user privileges
Using configuration parameter file: /u01/app/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
Start action for octssd aborted
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on 'rac2'
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.drivers.acfs' on 'rac2' succeeded
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2664: Resource 'ora.ctssd' is already running on 'rac2'
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl start resource ora.asm -init
Start of resource "ora.asm -init" failed
Failed to start ASM
Failed to start Oracle Clusterware stack
[root@rac2 grid]#
As we see the output above, at the end of the output
1) Start of resource ora.asm -init failed
2) Failed to start ASM
3) Failed to start Oracle Clusterware stack
The runInstaller is in the first VM rac1. My question is:
Do any folk understand how to solve the script root.sh in rac2 problem ( 3 fails of ora.asm, ASM and Clusterware stack as above) ?
Thanks.Please check there is no firewall exist:
try this like:
root.sh fails on second node
MOS note:
11gR2 Grid: root.sh Fails to Start the Clusterware on the Second Node Due to Firewall on Private Network [ID 981357.1]
Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1] (Most probabily this issue) -
Root password problem in Solaris 10
Hi All,
Have anyone noticed this problem before?
I've set the password on Solaris for the root user as "rootroot123". However, I'm able to login with any password that starts with rootroot (i.e. rootroot*)...
My solaris version is:
SunOS mynode01 5.10 Generic_138888-03 sun4u sparc SUNW,Netra-240
Is there a bug report in Solaris regarding this or any way to solve it?
Thanx,
MahmoodI think by default Solaris uses CRYPT_DEFAULT=__unix__ which limits you to 8 characters.
in order to have more than 8 usable characters in your passwd, then you must use "md5"
CRYPT_DEFAULT=md5
this is located in : /etc/security/policy.conf
I think you may want to change the password length in /etc/default/passwd
PASSLENGTH= (default=6) change it to something of your liking.
be sure to do a little more research on the exact steps, but this is what you are loking for. im just going by memory here. -
Oracle 11gR2 RAC: Running the script root.sh problem
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC) -
Parameter passing problem between TS-LabView
Hi
I am getting crazy with this problem. Basically I have a vi, in which you can change some parameters of a step type. I put this step type into a seq, open the Edit substep (the problematic vi), and I can change some parameters, respectively: Compare, Command, Command_params and MasterData (see attached image). When I press the OK button in my "Edit" vi, the parameters are saved into the TS variables of my step type, without failure.
The problem pops up only, when I push the CANCEL button, I expect that all the TS parameters keep the original value. This is the case...except one variable, called "Compare". All the others keep the previous values, so Command, Command_params and MasterData are ok. "Compare" is initialized to empty string :-(
Originally "Compare" was a Boolean, it was always initialized to FALSE, when I clicked the cancel button. I thought that is the problem.
Then I changed it to Ring. It was initialized always to 0.
Then I tried numeric, enum etc, always was initialized to 0, or in case of string, an empty string.
Why is it so? I attached my vi, you can look into it.
Attachments:
params.jpg 42 KB
Edit_APM_ATAPI.vi 222 KBHi,
In your first frame, you have connected all the other inputs to there respective outputs using local variables except for one, Compare and Compare out.
Shouldn't you connect this together so the output picks up what you have inputed to the VI.
What are you inputing into Compare, because if you are passing an empty string then that control seems to except the empty string, Even though you have the setting Allow Undefined strings disabled.
I'm using LabVIEW 7.1
Regards
Ray Farmer
Regards
Ray Farmer -
I bought Multi-pass for a couple TV shows (Daily Show & Colbert Report) because I knew I was going to be without satellite for several days. For the first couple days the shows automatically-downloaded ok, but for the last couple of days they haven't downloaded automatically, even though I can see the episodes listed in the ITunes Store. I've tried leaving and entering Itunes and the Itunes store several times, nothing happens... any suggestions?
First, make sure that you're logged into the iTunes Store using the account ID and password under which you purchased the season pass. Then try the "Check for Purchases" command under the iTunes Store menu; you may find the episodes waiting for you there.
If you're sure that it's correct and the missing episodes still aren't appearing, contact the iTunes Store customer support department through the form linked from the bottom of their Season Pass FAQ web page (I recommend that you use the form, not the link in your Purchase History as they advise; that's not proven to be very reliable) and explain the problem to them.
Good luck.
Message was edited by: Dave Sawyer -
How to solve parameter passing problem?
I have a report that can be place on any Portal page and it requires several parameters.
The report is based on a query:
select bldgname
from building
where (bldcntry = :cntry or :cntry is null) and
(bldstate = :state or :state is null) and
(bldcity = :city or :city is null)
The LOVs for the bind variables need to be linked, i.e. State LOV is function of Cntry LOV and city LOV is function of both cntry LOV and state LOV.
I can't use the Customization screen because it doesn't allow linked LOVs.
I can't use a master detail form because I would have to create a table consisting of the 3 bind variables, M/D forms don't work with views. Since this is just one of 60 reports I have to do, it would mean adding 60 of these pseudo tables.
I was thinking of placing a form, which can have linked LOVs, on the same page as the report, and then calling the page and passing the values of the LOV to three page parameters. Unfortunately, I need to dynamically determine the url of the page the report and form are on and p_page_url doesn't seem to be accessible from a form, although it is from a report, I have a TAR on this issue.
So I wonder if anyone has an idea how to solve this problem?
LarryHi,
Try calling the report from the success procedure of the form
Here is an example which calls the report from the success procedure of the form.
declare
flightno number;
ticketno varchar2(30);
blk varchar2(10) := 'DEFAULT';
l_url varchar2(2000);
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
l_url := 'http://domain/pls/reportname.show?p_arg_names=flightno&p_arg_values='||flightno||'&p_arg_names=ticketno&p_arg_values='||ticketno;
call(l_url);
end;
Thanks,
Sharmila -
Yet another "unable to find root device" problem (pacman issue) SOLVED
During this night I've been trying to solve a problem that let me without access to my ArchLinux partition.
Booting the kernel.
:: Starting udevd...
done.
:: Running Hook [udev]
:: Triggering uevents...done.
Waiting 10 seconds for device /dev/by-uuid ...
ERROR: Unable to find root device '/dev/by-uuid'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
The thing is that I've read about chrooting, I did chroot following the steps described on the Wiki https://wiki.archlinux.org/index.php/Change_Root but I have a problem with pacman and it's that I can't use pacman on chroot, it says: command not found. I must've done something wrong but I have no clue.
My disk is sda1 and I don't use a special partition for /boot or /home.
Thank you in advance.
Last edited by ffuentes (2012-08-17 04:33:38)I've solved the mystery.
Well, I realised that I had another serious issue with filesystem (that was mentioned on the Archlinux's news https://www.archlinux.org/news/filesyst … equired-1/ and https://www.archlinux.org/news/the-lib- … a-symlink/ ) so I had to figure out which packages were using /lib to remove them. Also I had to disable pacman's signature checking system because as I said before it didn't seem to work.
After removing every package that happened to use /lib at that time I eventually could perform the command "pacman -Syu" and later on "mkinitcpio -p linux" worked out.
Thanks DSpider. -
URGENT: Parameter Passing Problem
In Forms 6i I am sucessfully passing parameters from one form to another. The problem is I want the receiving form to execute the query at startup. I cant run execute_query; unless the form is in enter_query mode. In a trigger execute_query cannot be run in Enter_Query mode. So I am stumped. Ideally I wanted to try:-
-- Initailise Block Items with Parameters --
Enter_Query;
:interview.Position_ID := :PARAMETER.p_Position_ID;
:interview.Candidate_ID := :PARAMETER.p_Candidate_ID;
Execute_Query;
Obviously the reasons above stop me doing the above example.
Please HelpHello
This example is base on the dept table.
Please try this
trigger ->WHEN-NEW-FORM-INSTANCE
:GLOBAL.my_var := 10;
trigger ---> PRE-QUERY
SET_BLOCK_PROPERTY('emp', DEFAULT_WHERE, 'DEPTNO= ' ||:GLOBAL.my_var);
it works fine in my little example put the trigger on Forms level.
Best regards Patrick. -
Strange and fatal file name / root folder problem. Please help!
Hi there. I wonder if anybody could help me!
I am using CS4 but this problem still occurred in CS3. When I
set up a new site in Dreamweaver I go through the usual motions
selecting the local root folder and images folder. Then when I go
into the new site it creates an initial site cache as usual. After
this (when I try to upload anything for example) the cache seems to
have disappeared (i.e. all local files disappear in DW). It tells
me that I should go through setting up the site process again but
this only ends up going round in circles!
Curiously, when I look at my HD in finder, Dreamweaver has
created a new folder named "Macintosh HD" and inside it follows the
exact same file structure as the "real" local files except the
website files do not exist inside the root folder!
I can not understand what is going on here. I suspect it
might be something to do with the locations of files and relative /
absolute linking on the HD?
Please help if you can! Thanks.What is the NAME of your hard drive? Does it (or any
intermediate folder)
contain unusual characters (apostrophes, parentheses, etc.)?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mikrokosmonaut" <[email protected]> wrote
in message
news:gkpsts$b9t$[email protected]..
> Hi there. I wonder if anybody could help me!
>
> I am using CS4 but this problem still occurred in CS3.
When I set up a new
> site in Dreamweaver I go through the usual motions
selecting the local
> root
> folder and images folder. Then when I go into the new
site it creates an
> initial site cache as usual. After this (when I try to
upload anything for
> example) the cache seems to have disappeared (i.e. all
local files
> disappear in
> DW). It tells me that I should go through setting up the
site process
> again but
> this only ends up going round in circles!
>
> Curiously, when I look at my HD in finder, Dreamweaver
has created a new
> folder named "Macintosh HD" and inside it follows the
exact same file
> structure
> as the "real" local files except the website files do
not exist inside the
> root
> folder!
>
> I can not understand what is going on here. I suspect it
might be
> something to
> do with the locations of files and relative / absolute
linking on the HD?
>
> Please help if you can! Thanks.
> -
We have few accounts in essbase and scenarios in the same as part of dimensions in cube...
The issue being when we retrieve values using smartview add-in in excel we get problem.
The detailed expl being when we keep two pass property "on" certain members and "off" on certain while refreshing we get #missing as values on certain scenarios and values on other scenarios.
when we switch "on" two pass on members that we didnt put earlier, the values come correctly unlike previous case and differs vice versa(on the prev case).
This switch on and off doesnt solve the problem.
So kindly post a helpful answer and revert in case of doubts in my question.This issue has nothing to do with Smart View, Smart View is just retrieving the results calculated in the Essbase database. Changing the order of them members will have no impact on weather or how the members are calculated.
You might start with reading about two pass here http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/dcaoptcs.html#dcaoptcs1409
and then Calculation passes http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/dcacaord.html#dcacaord4127
and perhaps Calculation Orderhttp://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/dcacaord.html
Can I tell you how to fix it, No, It would be like taking your car to a mechanic and telling them it needs to be repaired and not giving them any information. I could spend hours telling you how to diagnose the engine only to discover you wanted body work done. Without know extremely detailed informatino about your database, the dimensionality, sparse/dense and formulas, I have no clue about the issues -
Site root links problem in Dreamweaver CS3
I am having trouble with links relative to site root when I
work on my localhost with Dreamweaver CS3.
I am building a site with PHP, MySQL using the WAMP server. I
have a page ( www.site.com/index.php ) that I want to copy to
sub-directories (e.g. www.site.com/about/index.php ) so I want to
make the copying as painless as possible by using site root
relative links (e.g. /about/index.php ). It works on the internet
but NOT on localhost.
Why is this? What can be done? Is there a fix if this is a
bug? This seems like such a simple thing but it is such a
problem.> Why is this?
Because when your (local) webserver see's that you are
directing it to the
ROOT, it goes to ITS root, not the website's root (e.g.,
htdocs or Inetpub).
You can get around this by using virtual hosts (google it).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"KBwebpro" <[email protected]> wrote in
message
news:fr6g48$gs4$[email protected]..
>I am having trouble with links relative to site root when
I work on my
> localhost with Dreamweaver CS3.
>
> I am building a site with PHP, MySQL using the WAMP
server. I have a page
> (
> www.site.com/index.php ) that I want to copy to
sub-directories (e.g.
> www.site.com/about/index.php ) so I want to make the
copying as painless
> as
> possible by using site root relative links (e.g.
/about/index.php ). It
> works
> on the internet but NOT on localhost.
>
> Why is this? What can be done? Is there a fix if this is
a bug? This
> seems
> like such a simple thing but it is such a problem.
>
Maybe you are looking for
-
Update OSX 10.4.7 and Quicktime 7.1.2 Quicktime will not work anymore
After updating to osx 10.4.7 and Quicktime 7.1.2, Quicktime crashes everytimee it is opened. Safari crashes when any page containing a quicktime movie is open and system preferences crashes when trying to access the quicktime preferences. The only ti
-
My iphone 4 wont activate after i reset it
I bought my iphone 4 used a year ago, I recently got a new phone and just wanted to use my iphone as an ipod, but now that ive reset it, its saying I cant activate it throu iTunes, and its wifi is broken, how do I activate it so I can just use it as
-
How do I reinstall OS X Mavericks
I inhereited an Apple at work for testing purposes. It was set up with only one Admin user and that person is long gone, So there is currently only one unusable admin and a guest account. I think the only thing I can do is re-install OS X Mavericks.
-
My 8x has been randomly shutting down as of about a week ago. I updated the phone, performed a soft reset and hard reset and none of that has helped. Has anyone else had the same issue?
-
Reverse Date in YYYYMMDDHHMMSS format.
Hi I want system date in YYYYMMDDHHMMSS format...