Root.sh fails during the last part of cluster installation.
hi,
I am trying to install clusterware for Oracle 11g on rhel 5.
Everything seemed fine untill the end of the clusterware installation...
Firstly i did not get the option to install orainstRoot.sh script, I mean the "Execute the configuration scripts" has only one script to install that is root.sh
Well, i ran the script with root user, and i get the below error. At the end i have uploaded the cluster install log aswell
[root@node1 ~]# sh /u01/app/crs/root.sh
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/u01/app' is not owned by root. Changing owner to root
The directory '/u01' is not owned by root. Changing owner to root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: node1 node1-priv node1
node 2: node2 node2-priv node2
node 3: node3 node3-priv node3
Creating OCR keys for user 'root', privgrp 'root'..
OCR create keys failed, OCR error 26.
Failed to initialize Oracle Cluster Registry for cluster
0
The configuration assistant says
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Command = /u01/app/crs/install/onsconfig add_config node1:6251 node2:6251 node3:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/app/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any)efore executing the same.-----------------------------------------------------------------------------
ToolFailedCommands file shows
# Copyright (c) 1999, 2007, Oracle. All rights reserved.
/u01/app/crs/install/onsconfig add_config cch_or_db1:*6251* cch_or_db2:*6251* cch_or_db3:*6251*
/u01/app/crs/bin/oifcfg setif -global eth0/10.2.0.0:public eth1/192.168.2.0:cluster_interconnect
/u01/app/crs/bin/cluvfy stage -post crsinst -n cch_or_db1,cch_or_db2,cch_or_db3
I am wondering so as to what exactly is 6251, is this the port number for all the three nodes? Infact port numbers for the three nodes are something else. Should i attach those port numbers to the respective node names and run the failed commands individually??
Here is the log file for the unsuccessful cluster install, i have uploaded
http://stashbox.org/313748/installActions2008-12-04_01-05-26PM.log
Any idea about this??
Hi
have your run cluster verify to check if your OS configuration and pre-requisities are done?
Similar Messages
-
I am using Mac OS 10.7.5. During the last week, it has started running very slow. Any thoughts?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??
If you have the latest version of iTunes you should not have to download the ipsw file separately as jalp suggests. iTunes will download it automatically.
This error (9) most often means that your antivirus or firewall (or router) is blocking access to Apple's servers. In rare instances it can also mean that the phone was hacked (or "jailbroken") to unlock it. If this is the case you must do a DFU restore, not Recovery Mode, as follows:
Reboot your computer
Disable your antivirus and firewall. If you has Kaspersky you may actually have to uninstall it, as it can never be turned completely off.
Connect the USB cable to a USB port directly on your computer, not to a hub. DO NOT connect the other end to the phone
Disconnect all USB devices except for mouse, keyboard and iPhone cable.
Launch iTunes
On the phone hold the HOME and SLEEP buttons at the same time for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button. The screen should be black. If it has an Apple logo this means you held both buttons too long. Release the HOME button and do it again.
While holding the HOME button connect the free end of the cable to the phone.
After a short while iTunes should recognize a phone in "recovery mode" (iTunes doesn't know the difference between DFU and Recovery modes, but the phone does)
Release the HOME button and don't touch the phone or the computer until the process completes or you get an error message. Ignore any displays on the phone.
If the error recurs the phone was probably messed up when it was hacked. This is not a hardware problem, or if it is, it isn't one you can fix.
You can try repeating these steps with a different computer and a different cable. If that fails also the phone is probably not repairable. -
The events of the last month, with the photographs have suddenly disappeared from the iPhoto Library. I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Is it possible to retrieve ???
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Z Tcode doesn't write the last part of program
Hi experts,
I have a program in a transaction code, and the last part, must be write:
Send it to the world
lv_sent_to_all = lo_send_request->send( i_with_error_screen = 'X' ).
IF lv_sent_to_all = 'X'.
WRITE 'Email Sent Successfully'.
ENDIF.
COMMIT WORK.
CATCH cx_document_bcs INTO bcs_exception.
WRITE: 'Error Occurred'. WRITE: 'Error Type', bcs_exception->error_type.
EXIT.
ENDTRY.
If I execute only the program, the write works correctly.
But if I execute the tcode (X) with the program, no write is working.
Someone knows about it??? Why is working if you execute the program and not when you execute the transaction??
thanks you very much!Its simple. While creating transaction code in SE93, u might have selected radio buton Program and screen (dialog transaction)
It should be 2nd option Program and selection screen (report transaction)
Create another transaction code selecting radio buton Program and selection screen (report transaction) and run the transaction code. It will work -
Oracle 11gR2 RAC Root.sh Failed On The Second Node
Hello,
When i installing Oracle 11gR2 RAC on AIX 7.1 , root.sh succeeds on first node but fails on the second node:
I get error "Root.sh Failed On The Second Node With Error ORA-15018 ORA-15031 ORA-15025 ORA-27041 [ID 1459711.1]" within Oracle installation.
Applies to:
Oracle Server - 11gR2 RAC
EMC VNX 500
IBM AIX on POWER Systems (64-bit)
in /dev/rhdiskpower0 does not show in kfod output on second node. It is an EMC multipath disk device.
But the disk can be found with AIX command.
any help!!
Thanksthe soluation that uninstall "EMC solutitons enabler" but in the machine i just find "EMC migration enabler" and conn't remove without remove EMC Powerpath.
-
Everytime i try to sync my music to my ipod touch, it always completely stops during the last stage. What can I do to get it to sync properly?
Have you looked here:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
The link provides links for other Win OSs. If you are still having problems please tell us what OS and version you are running and what version of iTunes you have installed. -
Does anybody know why during the last days on apple tv the podcasts (itunes) are not actualized?
Does anybody know why during the last days on apple tv the podcasts (itunes) are not actualized?
-
REG:Oracle Audit Vault Agent Installation fails at the last step .
Hi ,
I am installing Audit vault agent 10.3 and it is failing at the last on solarisis 10 sparc 64 bit .
The error is
OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
I have tried the Doc ID 1058184.1 but it fails at the end saying cannot update av.properties , If we create the the directories manually and create the av.properties file then the agent will start but it is not stopping until you kill the agent .
Moreover if i am continuing with this agent after registering the collectors i am not able to start them as i am facing the http 404 error .
So i think i need to install the audit agent successfully first .
can anybody help me please as we are on client side and it is critical deliverable .
Regards
Edited by: 836778 on May 1, 2012 4:52 PM
Edited by: 836778 on May 1, 2012 4:59 PMIn case you're still dealing with this issue:
I hit this problem when the OS user I was installing with was not in the proper OS group. I don't have the documentation in front of me right now, but make sure your user is in the DBA and/or OINSTALL group. -
Why is the last part of the Word Press install not working?
I am installing Word Press to work in Dreamweaver. I have installed MAMP and everything is working fine, I assume. The location of the files are /applications/MAMP/htdocs/wp-content/themes/twentyten.
I have installed PHP/MySql on my machine and have set up the wordpress database as instructed. The last part of the process has me bogged down. In following step one of the process, I get a blank screen. Here's the url: http://localhost/wp-admin/install.php and the instructions to complete the process.
With the WordPress files copied to the correct location in the htdocs folder, the web server installed, and a database created, open a browser and browse to http://localhost/wp-admin/install.php.
A screen telling you to create a configuration file will appear. Click the Create a Configuration File button.
Click the Let’s Go button to go to a page that allows you to enter your database information.
Type your database name, wordpress.
Type your MySQL user name and password (usually the user name and password are both admin, unless you changed them in the database).
For the Database Host type localhost.
Click Submit
Can anyone help?
Thank for your help,
GWalton55I'm stuck installing virtualhosts in DW and using Wordpress templates, but I may be a few steps further than you are, so I'll try to help. I'm also using Windows, so who knows?
I'm assuming you are not using a virtual host, just a local host; therefore, I went to the section that has instructions for the steps you are on in David Powers' "Adobe Dreamweaver CS5 with PHP: Training from the Source" and right after he has you launch the browser and open "wordpress/wp-admin/install.php" in "your [site name here] site." He goes on to write:
The URL depends on how you set up your testing environment:
Virutal host: http://[site name here]/wordpress/wp-admin/install.php
Localhost: http://localhost/[site name here]/wordpress/wp-admin/install.php
NOTE: if you are using the MAMP default ports on a Mac, add :8888 after [site name here] for a virual host, or after a localhost.
So perhaps that's what you're missing, I really don't know.
Good luck! -
iMovie message "There was an internal iDVD error during the last action. This is not a movie." comes up after trying to create a movie to burn to iDVD. Recently added a 2TB external drive to free up memory from HD. iDVD was working fine till the ED was added. Can't burn DVDs anymore. Any suggestions on how to fix the problem?
What folders did you move to the EHD? Any of the basic Home folders? What format is the EHD? It should be OS X Extended (journaled). Do you have any files that iDVD uses on the EHS, i.e. project files, media files?
OT -
Dear sony, During the last down time i tried to sign into my account then an error message appeared and my saved password was removed, I don't remember my old password and my birth day, please help me
go to
https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
and anter your apple is and then go to your main id and reset -
Glacial pace of this forum during the last several hours visible to others?
Is the glacial pace of this forum and other sites like Facebook during the last several hours visible to others? We're seeing timeouts b all the time.
Is this the result of another cyber attack launched from N. Korea?
Spooky.This site is fine as are many others.
Facebook remains a mess since yesterday. Something is definitely wrong in some areas of the US: -
An error message stating 'Synchronisation has not been able to complete during the last 7 days. Please check your network settings.' has appeared at the bottom of my browser for the last 2 days. Unfortunately, there is no guidance to what network settings I need to check. Any advice will be appreciated.
Troubleshoot your problem
*https://support.mozilla.org/en-US/kb/firefox-sync-troubleshooting-and-tips -
Elements 9 Projects plays fine on computer however when burned to a DVD it drops the last part
Hello,
this is my first post and first Question ever on Adobe site. I hope thatt someone can help. I have used Elemenys 3.0 for a number of
years. I have now upgraded to Elements 9. I am having an odd problem with a project that I am working on. Everything seems to be OK on the EDIT
and on the DVD PREVIEW mode ; However when burned to a DVD, I am loosing the last part of the project, and the laat scene button does not take me to the correct scene, It takes me to the one just BRFORE it. When the burning process is done, it shows that it all went well. No error messages. Does anyone have any thoughts as to what is causing this?hi photonutguy,
Since your question is about burning your video to a DVD disc, it is actually an Adobe Premiere Elements question. This forum is specifically about Photoshop Elements and is frequented by people who use Adobe Photoshop Elements for their photos.
there is a separate forum for Adobe Premiere elements where you will find the people knowledgeable in the video process for burning that DVD with menus at
http://forums.adobe.com/community/premiere_elements
So I recommend that you post your question at that Premiere Elements forum .
Maybe you are looking for
-
Firefox continues to crash unexpectedly. When it does a message requests me to send a report that is supposed to help Firefox understand the problem but I never hear from them again. Just how is someone who isn't a computer geek able to understand al
-
How to write the description of a field in EBP screen.
Hi All, i need to write the description of the field along with its value while clicking the f4. If the field displays G/L account value as 5000 and description as XYZ- i need to write the descritiption of along with the value. Could anybody can give
-
Draw a thin border around an inputText box????
Hi, I would like to draw a thin border around an inputText box but when I use the following, I am getting a thin border around the inputText box as well as the label (text) associated with it. I don't really want this border around the label. border-
-
IR column heading spanning mutiple lines colour issues
Hi, I'm using APEX v4.0.2 and thanks to this forum I'm aware of the problem around the banding of column headings in IRs when they span multiple lines. I've cured the problem by adding the following in the page header as suggested in previous posting
-
Por que no puedo usar variable fecha en este query.
en este query he intentado utilizar la variable para lo que sería mi variable fecha, por queno me la esta aceptando el generador de consultas del sap?. SELECT distinct 'series'= case When T0.series=1 then ' FORJADORES' WHEN T0.series=34 then 'UNIV