Rootpre.sh with Oracle 11G Installation on AIX 6.1

We are upgrading to Oracle 11G from Oracle 10.2.0.4 on AIX 6.1 and ECC6.
We are running Oracle 10G and SAP application while installing 11G
Oracle binaries (obviously in a new oracle 11G home) , while
installing Oracle 11G binaries we have to run rootpre.sh , Just
wondering if we have to shut down existinig oracle 10G while running rootpre.sh for
11G.
Based on the above answer,we need to plan the upgrade as this
will decide the length of downtime with Oracle upgrade, your reply will
be highly appreciated.
Thanks,
Al Mamun

Hello Al Mamun,
Check the upgrade guide:
http://service.sap.com/instguides
> Database Upgrades
> Oracle
> Upgrade to Oracle Database 11g Release 2 (11.2): UNIX
Also, the following notes may be helpful:
[1431797    Oracle 11.2.0: Troubleshooting the Database Upgrade|http://service.sap.com/sap/support/notes/1431797]
[1431800    Oracle 11.2.0: Central Technical Note|http://service.sap.com/sap/support/notes/1431800]
[1431793    Oracle 11.2.0: Upgrade Scripts|http://service.sap.com/sap/support/notes/1431793]
[1431798    Oracle 11.2.0: Database Parameter Settings|http://service.sap.com/sap/support/notes/1431798]
Regards,
Eduardo Rezende

Similar Messages

Errors while copying File Oracle 11G installation on AIX 5L

Hi,
I just try to install oralce 11g on my AIX 5l machine. All requirements has been checked and are done.
While installation I get many Errors like "File not find:"
/oracle/SID/..../applications/WFMLRSVCApp.ear , wfjvlsnr.csh, wfmgrstop.csh ..etc.
I am Installing fresh Oracle 11G.What could be the problem?
Could you please give me some hints.
Many Thanks
Mete

Make sure you unzip both zipfiles into the SAME directory, e.g.:
cd /<whatever>
$ unzip aix.ppc64_11gR1_database_1of2.zip
$ unzip aix.ppc64_11gR1_database_2of2.zip
$ cd database
$ ./runInstaller
Werner

Help needed with oracle 11g installation

Hi All,
I need some help setting up oracle database with users, schemas and the like.
I am new to oracle - using it due to a project requirement.
Any advice, links etc would be great.
Thanks in Advance

Check out Oracle By Example tutorials here.
http://www.oracle.com/technology/obe/11gr1_db/otn_all_db11gr1.html

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

ChangePerm.sh file does not exist in Oracle 11g installation

Hi All,
I have done successful Oracle 11g installation. After installation I noticed that Oracle 11g/installation does not have changePerm.sh file. Did anyone of you seen that?
Without executing changeperm.sh file, the binary files have 751 permission level. ChangePerm.sh script make change in file permission to 755.
Oracle support is not answering me why there was no changePerm.sh file under Oracle_home/install directory.
Thoughts/suggestions..
Thank you
Suresh

I'm not finding this to be the case reliably. I have both a 10G and an 11G install on one particular machine and the 11G installer initially creates the directories with a 755 permission, then right before the prompt to run root.sh, and at the same time it locks down any 10G home it finds (someone please explain that!) it locks down the 11G home too.
In true Murphy tradition, this hasn't happened on any of my testing machines, just my production.
Whatever silly contrived mechanism Oracle wrote to re-lock 10G when installing 11G is also locking down my 11G.

Primavera CM compatibility with Oracle 11g Express Edition

We are trying to install Primavera CM 13.1 application (on windows 7 32 bit) with oracle 11g express edition (on CentOS 5.4 64 bit). Installation is completed without any warning but while trying to log on in the system with expadmin, it shows Internal Server Error. Through dbconfigcm utility we can connect the database but while running the CMAdminConfig utility, it throws java exception in command line "Unable to parse XML String" with java pop-up warning node has no children.
Is it due to compatibility issue of Primavera CM 13.0/ 13.1 with oracle 11g express edition or something we are missing?
Regards,
Sandip

Thanks Jim for the quick response. From the link, I understand that TT integration will be available with an extra cost. I presume it is only with EE and not XE, correct? Technically, there is no TT support with XE, Is that a fair statement?
Thanks

Forms 6i is not connecting with Oracle 11g database?

Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?

Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N

Isqlplus with oracle 11g

Sir,
I m having a problem with oracle 11g. I m having oracle 9i working is good with oracle 9i but from my installation of oracle 11g i cant find the url of isqlplus. can I work with browser in 11g or not for queries.

Hello,
can I work with browser in 11g When you install Oracle 11g you have also APEX (this is a new feature) which is an Application to develop and deploy Web Interface:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/start.htm#BEHFIBJD
http://www.oracle.com/technetwork/developer-tools/apex/overview/index.html
More over, from the URL of the EM Database Controle Home page you have a Link to open a SQL Worksheet.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Oct 10, 2010 3:38 PM

Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G

Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco Kolombesky

In the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco

Help with oracle 11g pivot operator

i need some help with oracle 11g pivot operator. is it possible to use multiple columns in the FOR clause and then compare it against multiple set of values.
here is the sql to create some sample data
create table pivot_data ( country_code number , dept number, job varchar2(20), sal number );
insert into pivot_data values (1,30 , 'SALESMAN', 5000);
insert into pivot_data values (1,301, 'SALESMAN', 5500);
insert into pivot_data values (1,30 , 'MANAGER', 10000);
insert into pivot_data values (1,301, 'MANAGER', 10500);
insert into pivot_data values (1,30 , 'CLERK', 4000);
insert into pivot_data values (1,302, 'CLERK',4500);
insert into pivot_data values (2,30 , 'SALESMAN', 6000);
insert into pivot_data values (2,301, 'SALESMAN', 6500);
insert into pivot_data values (2,30 , 'MANAGER', 11000);
insert into pivot_data values (2,301, 'MANAGER', 11500);
insert into pivot_data values (2,30 , 'CLERK', 3000);
insert into pivot_data values (2,302, 'CLERK',3500);
using case when I can write something like this and get the output i want
select country_code
,avg(case when (( dept = 30 and job = 'SALESMAN' ) or ( dept = 301 and job = 'SALESMAN' ) ) then sal end ) as d30_sls
,avg(case when (( dept = 30 and job = 'MANAGER' ) or ( dept = 301 and job = 'MANAGER' ) ) then sal end ) as d30_mgr
,avg(case when (( dept = 30 and job = 'CLERK' ) or ( dept = 302 and job = 'CLERK' ) ) then sal end ) as d30_clrk
from pivot_data group by country_code;
output
country_code          D30_SLS               D30_MGR               D30_CLRK
1      5250      10250      4250
2      6250      11250      3250
what I tried with pivot is like this I get what I want if I have only one ( dept,job) for one alias name. I want to call (30 , 'SALESMAN') or (301 , 'SALESMAN') AS d30_sls. any help how can I do this
SELECT *
FROM pivot_data
PIVOT (SUM(sal) AS sum
FOR (dept,job) IN ( (30 , 'SALESMAN') AS d30_sls,
          (30 , 'MANAGER') AS d30_mgr,
(30 , 'CLERK') AS d30_clk
this is a simple example .... my real life scenario is compliated with more fields and more combinations .... So something like using substr(dept,1,2) won't work in my real case .
any suggestions get the result similar to what i get in the case when example is really appreciated.

Hi,
Sorry, I don't think there's any way to get exactly what you requested. The values you give in the PIVOT ... IN clause are exact values, not alternatives.
You could do something like this to map all alternatives to a common value:
WITH     got_dept_grp     AS
     SELECT     country_code, job, sal
     ,     CASE
              WHEN job IN ('SALESMAN', 'MANAGER') AND dept = 301 THEN 30
              WHEN job IN ('CLERK')               AND dept = 302 THEN 30
                                                                 ELSE dept
          END     AS dept_grp
     FROM     pivot_data
SELECT     *
FROM     got_dept_grp
PIVOT     (     AVG (sal)
     FOR     (job, dept_grp)
     IN     ( ('SALESMAN', 30)
          , ('MANAGER' , 30)
          , ('CLERK'   , 30)
;In your sample data (and perhaps in your real data), it's about as easy to explicitly define the pivoted groups individually, like this:
WITH     got_pivot_key     AS
     SELECT     country_code, sal
     ,     CASE
              WHEN job = 'SALESMAN' AND dept IN (30, 301) THEN 'd30_sls'
              WHEN job = 'MANAGER' AND dept IN (30, 301) THEN 'd30_mgr'
              WHEN job = 'CLERK'    AND dept IN (30, 302) THEN 'd30_clrk'
          END     AS pivot_key
     FROM    pivot_data
SELECT     *
FROM     got_pivot_key
PIVOT     (     AVG (sal)
     FOR     pivot_key
     IN     ( 'd30_sls'
          , 'd30_mgr'
          , 'd30_clrk'
;Thanks for posting the CREATE TABLE and INSERT statements; that really helps!

IPlanet 6.0 SP6 compatibility with Oracle 11g Client in Windows server 2003

Hi All,
We have issues with our classic ASP application when connecting to Oracle 11g. Our application Database is migrating from oracle 10g to oracle 11g, with oracle 10g we don't have any issues but we are facing issues with Oracle 11g database
We are running iPlanet-WebServer-Enterprise/6.0SP6. And Chilisoft is Sun ONE ASP 4.0 (formerly known as Chili!Soft ASP) on windows 2003 machine for running ASP application.
The connection we are trying is
Provider=OraOLEDB.Oracle; Data Source=xxxx;User Id=xxx;Password=xxx;
The error we are getting is "OraOLEDB error '80004005' "
Question: Is iPlanet-WebServer-Enterprise/6.0SP6. And Chilisoft is Sun ONE ASP 4.0 is compatible with Oracle Client 11g in Windows 32 bit machine
Appreciate your quick response
Thanks,
Murthy

I have the same situation. Could you please share your experience if you resolve it? Thanks.

Problems with oracle 9i installation in windows xp

I am having a problem with oracle 9i installation. I am getting error message like this "jrew.exe has encountered a problem and nees to close" can any body tell how to overcome this problem. I have cleaned registry also. I uninstalled java runtime environment and again installed java but i am still getting the message.

Hi Madhu,
The problem seem the "jrew.exe" file may be currupted.
Remove the file "jrew.exe" and try to reinstall Oracle.
Regards,
RKumar

Pro*C with Oracle 11g

Hi !
I didn't find a forum specific to pro*c, so here i am because i was told this forum had a bit of pro*c activity....
I've downloaded Oracle 11g and recompiled our applications using pro*c
We currently precompiling without any problem our sources against Oracle 7, 8, 9, 10.
With Oracle 11g, it doesn't work !
every EXEC SQL followed by a command works.
every EXEC SQL followed by a query generates the same error.
Example :
char *oracle_date_courante()
static char buf[SIZE_ORADATE+1];
EXEC SQL SELECT sysdate into :buf from DUAL;
if(ORA_SQLERROR())
oracle_error("sélection date courante");
buf[0]=0;
return buf;
PRO*C output :
Erreur Ó la ligne 105, colonne 2 dans le fichier src\oracle.pc
EXEC SQL
.1
PLS-S-00000, SQL Statement ignored
erreur sÚmantique Ó la ligne 105, colonne 2, fichier src\oracle.pc:
EXEC SQL
.1
PCC-S-02346, PL/SQL a trouvÚ des erreurs sÚmantiques
So, we investigated... And found that thoses errors come when we use the option sqlcheck=semantics.
If we use an inferiour check level, it works but because we use PL/SQL keywords, pro*c prints errors and wants us to provide the 'semantics' sqlcheck level !
So, it's a vicious circle !
Any ideas ?
Thanks...
Vincent

Adding the option common_parser=yes removes the errors !
But brings errors linked to the PL/SQL parser such like
CSF-S-00000, ORA-06544: PL/SQL : erreur interne, arguments : [55916], [], [], []
1>, [], [], [], []
1>ORA-06553: PLS-801: erreur interne [55916]
Really vicious..and still not precompiling !
By the way : Server is 10.2.0.1... and i guess thoses errors are normal since the common parser is not available in this version...
So bye bye option common_parser and i'm back to my orignals errors.
Message was edited by:
Vicenzo

Oracle SQL Developer 1.2 – Automatic - is compatible with Oracle 11g?

Oracle SQL Developer 1.2 – Automatic - is compatible with Oracle 11g?
Thanks in advance!
-Babu

So I'm taking it the question is -
Is 1.2 Sql Developer compatible with 11g DB?
The short answer is Yes. We are constantly adding new functionality and better support for the newer Databases. For Example to use the real time Sql monitoring that became available in 11g you will have to be on at least 2.1 Sql Dev. Is there some reason you don't want to upgrade to the latest Sql Dev? If not the current EA version then at least the current production version?
Thanks,
Syme

How to consume sap xi pi web services or sap RFC with oracle 11g forms.

Dear All
how to consume sap xi pi web services or sap RFC with oracle 11g forms.
or
how to config 11g forms with sap xi....
or how to call sap xi web services in 11g forms....
or can send sample code....
Regards
smfatmi
Edited by: smfatmi on Oct 17, 2011 2:16 AM
Edited by: smfatmi on Oct 17, 2011 2:17 AM

Dear All
how to consume sap xi pi web services or sap RFC with oracle 11g forms.
or
how to config 11g forms with sap xi....
or how to call sap xi web services in 11g forms....
or can send sample code....
Regards
smfatmi
Edited by: smfatmi on Oct 17, 2011 2:16 AM
Edited by: smfatmi on Oct 17, 2011 2:17 AM

Rootpre.sh with Oracle 11G Installation on AIX 6.1

Similar Messages

Maybe you are looking for