ROS Questionnaire received empty from the supplier

Hi Everyone,
Just two issues:
1.The first issue is that ROS questionnaires are sometimes received from the supplier with no data. When viewed from transaction Preselect suppliers, these questionnaire's fields are also not grayed out (e.g. one can type data into the text fields and select checkboxes), which is not characteristic of questionnaires received which contain data (they are uneditable). This only happens with some suppliers, therefore I do not know where to start. How can this problem be traced/solved?
2. Once the supplier has received the mail with a questionnaire and completes the questionnaire is it possible to display a confirmation message to the vendor once he/she has click the submit button?
Regards'
David

Hi
For the 2nd problem, the answer is yes. You can display a confirmation mail/page after submission of questionaire. To do this, open your survey, navigate to Extras--> Confirmation Page. Set the flag for confirmation here. This should activate sending a confirmation after  questionaire submission. A mail would be sent if your using attachment, else if you are using URL, then a confirmation page would get displayed.
For the first problem, I am not sure, but you can check by saving again your questionaire.
Regards,
Sanjeev

Similar Messages

  • WUC-17 Information was missing from the supplied file download request java

    Dear Forms Guru,
    Can anybody help why i'm receiving this error using webutil.
    WUC-17 Information was missing from the supplied file download request java..
    the result in my jinitiator console are the ff:
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
    RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
    connectMode=HTTP, native.
    Forms Applet version is : 90290
    2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
    2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
    2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
    Many thanks in advance...
    benjie

    Benjamin,
    WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
    install.syslib.location=/webutil
    ## Do not change the following lines unless instructed to do so
    install.syslib.0.7.1=jacob.dll|94208|1.0|true
    install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
    install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
    ## But you can add your own libraries in here
    #install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
    If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
    <virtual-directory virtual-path="/webutil"
    real-path="c:/webutil/lib" />
    in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
    Pleae refer to the webutil documentation for teh exact configuration steps.
    Hope this helps
    Frank

  • I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    Load the drivers and you should then be able to add it in Print Center.

  • A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

    Hi guys
    i have problem when i run my windows application exe in windows server 2003
    it give me this exception error :
    I using sql server 2005
    visual studio 2008
    See the end of this message for details on invoking 
    just-in-time (JIT) debugging instead of this dialog box.
    ************** Exception Text **************
    System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
       at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
       at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
       at System.Data.SqlClient.TdsParserStateObject.ReadByte()
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
       at System.Data.SqlClient.SqlDataReader.get_MetaData()
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
       at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
       at Sales.SalesClass.ShowSalesData(String ConnectionString)
       at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
       at System.Windows.Forms.Timer.OnTick(EventArgs e)
       at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ************** Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    Sales
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Transactions
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
    System.EnterpriseServices
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    Why this error show and how to solve it
    if possible help me
    Why this exception show and how to solve it.
    Notes this exception not close my application and not affect in result show but i don't know why it show

    The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
    http://support.microsoft.com/en-us/kb/555938

  • I cant call to a mobile number since yesterday, but can receive call from the same number. I am using iphone 4s. Is there any setting error?

    I can't call to a mobile number since yesterday, but still can receive call from the same number. I am using iphone 4s. Is there any setting error?

    you have to make sure that CFWD Bridge Mode under the Line tab of the SPA9000 where the SPA400 is registered is set to ALL...include VMSP Bridge and XFER Bridge Mode as well..power cycle then check if you are still getting one-way audio
    | isolate! isolate! isolate! |

  • MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

    MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • Can calendar entries from an iPhone be pushed up to the cloud for iPad and computer updating? My phone only seems to be receiving updates from the cloud, but not able to send them.

    Can calendar entries from an iPhone be pushed up to the cloud for iPad and computer updating? My phone only seems to be receiving updates from the cloud, but not able to send them.

    Under Settings->Mail, Contacts, Calendars, What do you have set for the Default Calendar? Personal?
    If you don't have it set to a Cloud Calendar it will only create the entry locally.   You would need to select the iCloud Calendar specifically when creating the Calendar entry to have it sync.
    Otherwise set your default calendar to be the iCloud Calendar so all entries are created there by default. And as such get synced to other devices.

  • HELP!! Recovering items emptied from the trash

    I need to know how to retrieve items emptied from the trash. Somehow an important file got in the trash and deleted. Can someone please help me!!

    Try using an application such as Data Rescue or FileSalvage.
    (29240)

  • HT5887 I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

    I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

    I have tried all sorts of Settings but just doesnt seem to work one way. I keep getting messages "Airdrop cancelled".

  • I was using HeyWire to text my friends but it just stopped receiving texts from the friends in Grand Rapids, MI. Why?

    I was using HeyWire to text my friends but it just stopped receiving texts from the friends in Grand Rapids, MI. So anyone can help me????

    Suie,
    Thanks for reaching out to us about it and we do really appreciate the feedback so that we can work on any issues that may be present. There was a period of maintenance with our servers and this is probably why you were unable to receive messages from a particular contact. I would close, and reopen the app and attemp to exchange messages with this contact. If you are still having issue please email us @ [email protected]
    Thanks for using HeyWire!

  • How can i recover items that were emptied from the trash can?

    I accidentally deleted my iphone back up and emptied the trash. i REALLY need to recover that back up... HELP!

    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • OJ 6500 E709n, W7,How to change which home network computer receives scan from the printer?

    Only one computer of the three on my home network can receive any scan from this wireless printer.  It was the first one set up to do that.
    That computer is now away at school.  How can I change the computer on the network that will receive the scan?
    I have tried to change the printer from the printer's Set up on the printer's face, but it only shows the one computer and I can't figure out how to change it to another printer.
    Thank you for your help.

    Hi AtlArchitect, and welcome to the HP Forums.
    I see you are looking into connection options.  Due to the age of the printer, there is not software to connect to Windows 7.  You do have the option to connect with a USB via the Windows basic print driver.  You can find more information here: 
    Installing the Printer Software in Windows 7 for a USB Cable Connection
    Please let me know if you have any questions.  Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • We have 3 iPads 3 iPhones 3 Apple id's.  We want to use 1 calendar we can all access on each device and have each device update or sync and we all receive notifications from the one calendar. We do not want to share photos contacts, ect.  Please help

    We have 3 Apple Id's, each ID using an iPad and an iPhone (3 id's, 3 iPads, 3 iPhones). We want to use one calendar on all 6 devices and have that one calendar update or sync to all devices.  We would like all 6 devices to provide notifcations from the one unique calendar as well.  We do not want to share contacts, photos, ect.  Please suggest how to achieve this, with the name of the calendar, if I am to get one from the App store, and how to set this up.  Please talk in easy terms as I am technically Challenged. Thank you.  3 iPad air 2, 2 iPhone 6 plus, 1 iPhone 4s.

    Hello there MizzouTrojan,
    If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
    iCloud: Share a calendar with others
    Share a calendar privately
    Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
    Note:    You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.” 
    Type the invitee’s email address in the Add Person field and press Return.
    Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only). 
    For each person you want to share the calendar with, repeat steps 2 and 3.
    When you’ve invited everyone and set their privileges, click OK.
    Invitation emails are sent from your iCloud email address to the participants you specified.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Problem in receiving packets from the client

    private static boolean isSocketOpen = true;
    public void receivePackets(){
              if (isSocketOpen) {
                   byte[] buffer = new byte[IOBConstant.MSG_SIZE];
                   DatagramPacket packet = getDatagramPacket(buffer, buffer.length);
                   packet.setPort(7000);
                   try {
                   packet.setAddress(InetAddress.getLocalHost());
                             if (udpSerSocket.isConnected()) {
                             System.out.println("inside receive");
                             logger.logDebug("listening on port 7000");
                             udpSerSocket.receive(packet);
                   } catch (IOException ioe) {
                        logger.logError("Error to receive message", ioe);
    The problem is that the receive() method inside the receivePacket() is not working. It is not receiving any packets. If you have any suggestion please let me know.

                   packet.setPort(7000);
                   try {
                   packet.setAddress(InetAddress.getLocalHost());Setting the port number and address on a DatagramPacket you are about to receive into makes no sense. It doesn't do any filtering, if that's what you're expecting. It doesn't do anything at all useful. The IP:port will be overwritten by the sending IP:port when a packet is received.
                             if (udpSerSocket.isConnected()) {Have you connected it?
    >
                             System.out.println("inside receive");Does this display?

  • I have lost an email. It has something to do with threads. I have not read the email and would like to get it back and continue receiving emails from the sender

    Please excuse me if you have already received this query. I have lost an email which I clicked on quickly to see what it was about and intended coming back to read it later. It disappeared from my inbox and a caption related to the email appeared at the bottom of my subsequent emails. I have been unable to find the original email. Could you please advise if it is possible to retrieve it and if so how it may be done. Thank you
    sharon

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

Maybe you are looking for