ROS Questionnaire(Survey) not visible in PreSelect Supplier / Questionnaire

Hello Guys!
I have problems to visualize the ROS Questionnaire alredy in ROS.
Every thing seems to be configured fine, SO50 ...Integration with Exchange is fine
.. and i See that the questionnaire was received, but I cant see the questionnaire link in questionnaire tab page from Pre-select supplier: (UWS_MODE=DISPL Link)
SO50 i have 2 lines:
Line 1:
Comunication Type: Internet E-mail
Recipient Address: [email protected] (valied e-mail address)
Document Class:*
Exit Name: CL_UWS_FORM_RUNTIME_MAIL
Call Sequence: 1
Line 2:
Comunication Type: Internet E-mail
Recipient Address: *
Document Class: ICS
Exit Name: CL_APPOINTMENT_REPLY
Call Sequence: 1
To be honest i didnt see it work in SRM 6.0 (It is not working in SAP Early DEMO 6.0) it works only on SRM 5.0 DH2
Please let me know if you solved the problem!
Thank you very much,
Sheila Silva

you must first activate configuration mode for web ui . to do that activate the following flag Enable configuration mode under Personalize -> Settings-> Personalize Settings-> Enable configuration mode
then go to your transaction and you will see ne type of buttons one is for configuration of available assignment blocks. click on it and you will get the list of available blocks. search for survey block and add it to visible blocks and mark it as visible.
that's all.

Similar Messages

Supplier not visible in the Purchase Order Menu

Hi All,
I have created a Supplier and a Supplier Site from the back end using Supplier Conversion.
It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not visible in the Purchase Order Menu in Purchasing.
I have Enabled the following flags in the Supplier Site Level,
               l_vendor_site_rec.purchasing_site_flag := 'Y';
               l_vendor_site_rec.pay_site_flag := 'Y';
               l_vendor_site_rec.rfq_only_site_flag := 'Y';
What else do I need to enable in Supplier level for the Supplier to be visible for Purchasing.
Please give me a solution so that I can resolve my issue.
Thanks in advance.
Regards,
Bhaskar.

Hi,
You will have to achieve this through APIs, Please do some google and refer Oracle docs.
Following are some links, which may interest you:
R12 Oracle Apps: Supplier or Vendor Creation API
Oracle EBS Technical Step By Step: August 2012
Hope this helps!
Best Regards

Supplier screening not visible

Hi
We are having SRM 4.0 with SUS installed.
1. In SICF under BSP-->SAP there are 2 services self registration. <b>Ros_self_reg</b> and <b>Srmsus_selfreg</b>.
Which one we should configure for supplier self registration.
We have configured ROS_SELF_REG for supplier self registration. Is this correct? If so what is the significance of SRMSUS_SELFREG.
2. There is no "Supplier Screening" entry in the Menu tab for the role SAP_BBP_STAL_PURCHASER or SAP_EC_BBP_ST_PURCHASER in PFCG. How to get that entry in the role.
Because of this I am not able to see "Supplier Screening" link with purchaser's role in EBP web application and not able to see the suppliers who are registered through self registration page.
Please provide the solution for the above.
Thanks in advance.
Jagdish

Hello Jagdish,
1) This is since SRM 4.0, where we replaced Java based SUS WPS with BSP.
One should be for SUS only, and the other one for SRM ???
2) Here is a copy of online help. You must adapt the role with this BSP link:
Prerequisites
Supplier Screening with SRM Server
You have at least one of the following roles:
·         Purchasing assistant
·         Professional purchaser
·         Operational purchaser
·         Strategic purchaser
The Preselect Vendors transaction is delivered with the single roles. In order to use the transaction, you must enter the URL for supplier screening in the single role. Then you must update and activate the composite role.
Supplier Screening with ERP
You have logged onto the supplier registration system with the role SAP_EC_SUS_ROS_ PROCESSOR.
Rgds
Christophe

Insurance Company Supplier Not Visible in Fixed Assets

Hi,
We setup a supplier as a "Insurance Company" supplier in Oracle AP, but the supplier is not visible in the Fixed Assets Policy drop-down list. Does anyone know if there is an additional step that has to be performed first?
Thanks!

Hi there, this forum is for Oracle Insurance products - not Oracle AP. Try this forum Financials instead.

Create supplier button not visible

Hi Gurus
We are running r12 on solaris 5.10. We have one custom responsibility "KGL AP Superuser".
Previously we had a option of “Create Supplier” option under KGL AP Superuser--> supplier --> Entry. Now that option is not visible. But It is there is TEST CLONE. How do I enable or visible this in PRODUCTION.
Regards
Musaddaq

Hi Bob,
Thanks for your response. Could you please let me know where can i find steps or video to create application in windows.
Vjay

The date update from TFS online are not visible on Project pro

Hi everyone,
I updated the start date and the finish date from TFS online, i saved and refresh the page. Then On the Project pro i clicked on refresh. The update are not visible on project pro.
I don't no why because when i change the title of the task from TFS online. the update is visble on Project pro.
Someone to help me??
Thanks for advance.
rexcs

Hi rexcs，
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS1292 There are two numbers that are not visible in the middle of the code What can I do?

There are two digits that are not visible in the middle of the itune code. How can I still access this card?

Click here and request assistance, supplying as much of the code as you can.
(74408)

Account generation workflow custom process not visible in lov

Hi guru,
i have created a sample process in "Project Supplier Invoice Account Generation".
but when i upload the work flow in data base by the concurrent program . i dont find the sample process in " account generation window" in GL.
Please help gurus.
Regards
vishal

Hi,
See the foll notes for solution:
Note 541877 - CUF: Customer fields as checkbox
Note 1016297 - Header customer fields are not displayed in bbpsc02
Note 1034079 - Customer fields not visible in shopping wizard
BR,
Disha.
Pls reward points for useful answers.

PO not visible in WEBUI when Multiple Sup. loc linked to one Sup Org BP,SNC

Hi,
We are implementing SAP SNC 7.0 and started small testing's.
When one supplier location(each individually) is assigned to Supplier org BP, PO is visible in WEBUI.
When two supplier location is assigned to one supplier org BP, PO is not visible and message says"Order not found for the selection"
Whereas when i go to SMI details, it shows data for both supplier location in WEBUI.
Their is no visibility of POand demand.
Thanks & Regards,
Siva

Hi Siva,
You have created PO when one supplier location(each individually) is assigned to Supplier org BP.
In Purchase order Supplier field=<Supplier BP Org> so when two supplier location is assigned to one supplier org BP you have removed supplier BP org for which you have created Purchase order and this is the reason why it is not visible.
Eaxmple:
Supplier1:10000
Supplier2:20000
Case 1)when one supplier location(each individually) is assigned to Supplier org BP
say Supplier1:10000 is assigned to supplier Org BP=10000
say Supplier2:20000 is assigned to supplier Org BP=20000
and you have created Purchase order 45000001 for supplier 10000.
Case 2) when two supplier location is assigned to one supplier org BP
say Supplier1:10000 and Supplier2:20000 is assigned to supplier Org BP=20000
or
supplier Org BP=30000 then you won't be able to see purchase order in SNC web UI as when you have created purchase order supplier BP org was 10000 and now it is 30000 or 20000.
Regards,
Nikhil

Data not visible in ODS though available in PSA

Dear All,
I am working on BW where data extraction is from CRM. The client needs reports after survey is carried out in a set of questionnairres containing questions and answer. Currently four set of questionnairres is created in the dev server and sample data is updated.
Till last week we were getting all the transaction data for all the questionnairres, now one of the questionnairres is modified and after extraction we find that for the modified questionnairres we are able to extract the corresponding questions and answer option upto the PSA but the data is not visible in the ODS.
what could be the reson for the same?
Any help will be suitable awarded with points!
K Dengupto

Hi ,
Are requests reaching the DSO...IF yes Try to check whether your request in DSO is getting activated .
Check whether new field is added and same has been mapped through transformation.
Did you try to see the monitor at the time of loading and try to trace the cause there if the requests are not getting updateded to the DSO
Regards
Rahul Bindroo
Edited by: Rahul Bindroo on Feb 7, 2008 12:05 PM

GTX770 TF 2G OC is not visible in CC

Hi @ll,
I built up a new system with a MSI Z87 G45 Board and a GTX 770 TF 2G/OC. I'm using Windows 8.1 (64bit). Almost everything is working well, even Windows. :-) However, if I'm starting the MSI Command Center the graphic adapter is not visible. So I can see the RAM and the processor and fan but as I mentioned not the GTX 770.
I have installed the newest nvidia driver.
Who knows or is knowing the problem?
THX in advance
Meph

Jennifer,
I would suggest you try this also.,
VIRSAR3_01_MODEL
VIRSAR3_01_METADATA
And I believe you have defined your SLD data supplier in the SLD.
Thanks.
Regards,
Muthu Kumaran KG

Cs5.5 - OSX 10.7 CMYK ICC Profile not visible?

Hi
Hoping someone can help here.
IT department have installed a new Macpro into our prepress/design area using OSX 10.7 Lion with CS5.5 and now we are not able to use/see any of the custom CMYK ICC profile we use for printers - laser or epson wide format inkjet on any of the CS5 apps. Prior to the new mac we had no issues as we were using 10.6.8 and CS4. I have read through many forums and release notes regarding issues with Lion and CS5 but haven't found any reference to Custom ICC Profile issues.
The ICC profile we urgently need is for our Epson 7800 using custom stock for proofing - specifically supplied for our color management to output to Forgra39 standard.
Had a specialist come in and he's baffled as well.
Any help with this would be MOST appreciated.
Thanks Mike

The ICC profiles are not visible to Applications as Output profiles i.e. Printer profiles. We have double checked the paths and they are correct and the profiles are installed. but they do not show up in Indesign, illustrator etc as a printer profile... In fact no cmyk profiles (even those supplied from Adobe i.e fogra39.icc) show up. When we open up colorsync we can see them but when we try any application to output to a cmyk print (laser or inkjet) the cmyk profiles are not visible.
any help much appreciated in advance
cheers Mike

Audio Interface (Presonus) on Intel iMac - Control software not visible

I'm trying to use core audio compatible Presonus Inspire 1394 firewire audio interface on my new Intel iMac. My main problem is the only controls for the interface are onscreen, but software for said control panel doesn't visibly open. The icon for the device oscillates side-to-side in my dock, and trying to move the inspire file from the desktop reveals that "the app is open." However, I can not see the control panel or any other evidence the file is open. With the help of Presonus tech, I've discovered a couple of things:
1. The device syncs with my iMac, as evidenced by its presence in the Audio Midi Setup panel, plus
2. Play back of a song in iTunes goes through the interface's headphone jack just fine.
My install procedure has revealed two things, also:
When I put the software disk in, open the Inspire control panel file, then the control panel is visible. However, when I then plug in the firewire device, I get an eternally revolving beachball and eventually have to force quit (new to mac, but I figure that is my only option at that point.)
However, if I plug in the firewire first, then try to open the control panel file, I get the open-but-not-visibly-so problem I first mentioned (appears in dock, etc.).
Does anyone have any suggestions? Has anyone experienced a newly loaded app appearing in the dock but not visibly open?
I've tried restarting mac, reinstalling sw and device, downloading said software from the Personus web site (vs the disc supplied version), and both repairing and verifying HD permissions. I am at a loss. Presonus said the device is plug-and-play with core audio. a check reveals the device is PowerPC, but they said it should run on intel mac too, based on their assurances from apple personnel and other stuff I didn't understand (it is an OS X issue, not platform...or something).
Thanks for any suggestions.
Intel iMac 17 in Mac OS X (10.4.4) 1 GB RAM

I got the following message yesterday from Presonus:
Hello,
The new Intel Mac's have a proprietary OSX that does not fully support our
products yet.
They will, but I have no ETA.
Check our website from time to time for future posts and available
downloads.
Butch Richard
Interface Technical Support

Roles not visible

Hello SRM Experts,
I am configured SRM 7.0 with Extended Classic Scenario. Also I assigned Operational & Strategic Purchaser roles (Both SRM & Portals). But I am unable to see the Assign Source of supply,Process RFx and Process Contracts links on the roles.
Am I missing something ? Please guide me...
Cheers,
Laasya

Thanks... I solved by adding Strategic Purchasing (ERP/SRM) Roles..... But I have another problem.....
ERP Purchasing Req is not visible on SRM. I got the error message.....
The following error text was processed in the system R01 : Syntax error in program /1BCWDY/8IXXHLHPT8QQEEM1YQGJ==CP .
The error occurred on the application server ALPHA_R01_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
      Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
      Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
      Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
      Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP

'Element is currently not visible and so may not be interacted with' when using Firefox.

.

Hi MonsoonMally,
Thank you for posting in MSDN forum.
>>'Element is currently not visible and so may not be interacted with', when playing back a CodedUI capture for a particular button selection function (captured in IE) and played back in Firefox.
Based on your issue, I suggest you can try to use the
DrawHighlight Method /SetFocus() to check if the correct control is found before you perform actions on the target control.
If the above suggestion could not help you, since this cross browser testing is involved to the Extensions tool
Selenium components for Coded UI Cross Browser Testing, this extension tool is
out of support range of this forum.
In order to resolve your issue better, I suggest you post this issue
here, click “Q AND A”, you will get better support there.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ROS Questionnaire(Survey) not visible in PreSelect Supplier / Questionnaire

Similar Messages

Maybe you are looking for