ROS - SRM Vs, Vendor management -E-Sourcing
Hi all
How vendors are screened in e-Souricng in Vendor management arena. I learnt that e-sourcing too accept and manage vendors .
Supplier screening is very important in procurement busisness.
Is it like Registration of suppliers (ROS) in SRM?
Are after created a vendor in e-sourcing , will u push to ECC or SRM. How vendor data are sync with Backend systems like ECC /SRM.
really vendor data relate with accouting data will be stored in ECC. what about in e-sourcing.
since customer expect this functionality. ARe in e-sourcing can used for only Vendor management for large scale customers. for eg tomorrow DUN And BRADSHEET wanted to use Vendor management functionality via e-Sourcing. is it possible.
Any help is apprecited. I am Mostly interested How vendors are selected / what are the main factors are considered to accept a vendor .
Thanks
Muthu
Hi Muthu
Check out this note
1313088 Integration of SAP E-Sourcing 5.0/5.1 and SAP ERP
on page 2 and 3
Replication of SAP E-Sourcing Supplier to SAP ERP Vendor
This scenario supports the replication of suppliers that have been created in SAP E-Sourcing
for a sourcing event. Suppliers can be replicated back to SAP ERP individually on an asneeded
basis with user intervention.
When transmitting supplier master data from SAP E-Sourcing to SAP ERP, only external
number assignment is supported. This means that SAP E-Sourcing determines the supplier
number that is assigned to the vendor when it is created in SAP ERP. This is possible via SAP
E-Sourcing configuration mechanisms.
Internal number assignment in SAP ERP is not supported in the current integration package.
This means that SAP E-Sourcing does not allow a supplier to be published to SAP ERP when
internal number assignment is used. An error message is displayed in this case.
Linking is possible only through a manual process (that is, you must create the vendor in SAP
ERP manually and then link it to the SAP E-Sourcing supplier manually).
Supplier changes cannot be replicated from SAP E-Sourcing back to SAP ERP. Only the initial
creation of the supplier is supported.
The following basic SAP ERP vendor fields are supported:
SAP E-Sourcing Supplier Fields SAP ERP Vendor Fields......
cheers
alex
Similar Messages
-
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
How to select the vendor from the source list in the PO(me21n) screen ??
Hi
How to select the vendor from the source list in the PO(me21n) screen.
Is there any Sources of Supply tab in the PO just like we have in the PR.
I don't want a PO raised from a PR which has got the Vendor assigned to it already.
Or the SAP doesnot provide the option of Source list/Assign source/Sources of Supply .....in the PO.
Kindly replyThere is not any facility available for Source Determination in PO. Only you can select the line item and click Menu Environment > Source List and view the list of sources available for the material but you can not chooss and assign. If you wan to assign the vendor then change the vendor already entered in PO and put the desired vendor.
-
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
Need SRM BW Vendor Evaluation Report Names with format
It would be really appreciable if someone can share the SRM BW Vendor Evaluation Report Names along with the format.
Cheers,
SheetikaHi Sheeetika,
please check here..
http://help.sap.com/saphelp_nw70/helpdata/en/42/de4c7e2f842cede10000000a1553f7/content.htm
hope this will help you.
Thanks,
vijay. -
Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wallHi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
SRM - Catalog Content Management
Hi SRM Masters
Can any one could send me the config documentaion for SRM Catalog Content Management document and functionality(other than SRM260 and SRM270 both I have).
and also SUS config documents and functionality.
Regards
RajeshHi,
Check these links....
http://www.sap.com/usa/solutions/businesssuite/srm/pdf/BWP_SID_Catalog_Content_Mgmt.pdf
http://www.jhu.edu/hopkinsone/documents/SRMCatalogandContentManager_000.pdf
Reward points if useful....
Regards
AK -
Vendor Management / Tracking the Product or Material
Hi Friends:
Is it possible to follow up on Vendor Management. the case study is as under :
In an organization, the customer has a problem with the product, & the organization offers Customer Service ( which may be mapped in CS Module), in-house repair & on site repair.
There is a case wherein the engineer from the service provider side ( organization) is not able to solve the problem & due to technical or lack of spare part or any other reason, the product / or its part is sent back to VENDOR either fo the Replacement or REPAIR of the product, and the customer does not know where is the product or its part is neither the service engineer s know, And when customer makes a call to enquire about his product, no one in the company has the answer asto where the product is either with the service provider or at the VENDOR site.
So, in order to track the product immediately... where can the same be tracked & which Module of ERP (R/3)? CS Module, MM Module or any other Module ?
Kindly Suggest & advice.
Regards, PradeepHi,
As per your scenario, try these following steps:
1. Create the Service Notification
2. Create the Service Order based on notification
3. Based on analysis, either operation can be done internally (PM01 Control Key) or externally (PM02 Control Key)
4. PR would be generated for the External Operation
5. Components may be issued based on that order for the External Operation
So based on that document flow in notification, you can track the status of the service notification. Even you can define the tasks to be done for the service in the notification, so that, you can track that notification very well.
Regards,
Maheswaran. -
SRM-SUS Vendor registration BSP enhancement.
Hello Gurus,
Need help on vendor registration screen enhancement on SRM SUS. Its BSP application. How to enhance the BSP application. I need to add almost 20-25 fields in the SRM-SUS Vendor registration process screen. How to achieve this.
Appriciate for the immediate responce.
Thanks,
RamHello Veda,
Do we have an option to edit a specific page form SUS application without the need to create a Z copy of the same. Say I want to provide a new field on SUS PO screen in standard SUS application.
Does system requires an access key for editing this object at Page level or BSP application level ?
I cannot check the same in my system as it asks for normal workbenc request to edit the object.
If you are aware of this access key, please provide some details.
Thanks,
Mridula -
Hi All,
Can any body help me by giving some useful links regarding Vendor Managed Inventory (VMI), from where can i get Best practice document related to VMI.
regds,
CBHello,
Following SAP help link may help you;
http://help.sap.com/bp_blv1600/V5600/BBLibrary/HTML/139_EN_IN.htm
http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/content.htm
http://help.sap.com/saphelp_scm70/helpdata/en/5c/3f9df8bbc34413809579fc5d18414e/content.htm
BR,
Tushar -
Hi All
Can some send me a process flow diagram on Vendor Managed Consignment.
Please include the following together with notes
1. Goods Issue against a reservation
2. checking of Consignment stock balances
3. Back Order creation
4. consignment physical inventory
VishnuHi vishnu,
Pl. find the link for PDF file http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIM/MMIM_ST.pdf
http://sap-img.com/sap-sd/consignment-sales-process-in-sap.htm
http://www.easymarketplace.de/online-pdfs.php
Regards
hareesha -
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi -
Notification from SRM to vendor, who wins the bid
Hi Friends
Could you tell me, how can I send the notification from SRM to vendor, who wins the bid?
Now I can only send invitation to the bid invitation.We activated special WF for bids
-
Factory-class in data-sources.xml managed-data-source
OracleAS_1\j2ee\home\config has
data-sources.xml
Using managed-data-source.
For connection-pool, connection-factory factory-class If I use OracleDriver instead of OracleDataSource, what difference would it have? In terms of performance?
Thanks.Oops, a case issue...
class="oracle.jdbc.pool.Oracle[b]OCIConnectionPool" -
Hi all~
I'm beginner in SNC.
SNC have SMI scenario. But I think SNC-SMI is same as MM-VMI scenario.
SMI
======================================================
http://www50.sap.com/businessmaps/1D59B26B277611D5B359000102ACA9A3.htm
The SMI process is a supplier-driven replenishment and planning process, which is based on min/max stock balance levels, on current demand, in-transits and planned shipments.
======================================================
VMI
======================================================
[http://www50.sap.com/businessmaps/459B5C21A96411D3870B0000E820132C.htm|http://www50.sap.com/businessmaps/459B5C21A96411D3870B0000E820132C.htm]
With vendor managed inventory scenarios, manufacturers can offer their customers a value added service by performing the replenishment planning task for their business partners.
======================================================
Anyone can help to verify differ or same?
Thank you.
SKY.Hello ,
To add to above two answers,in SNC supply chain is as follows.
SUPPLIER -
> MANUFACTURE -
> CUSTOMER
SNC as an aplication will be installed at Manufatcurer site.
Now if Supplier is managing inventory for manufacturer than it is SMI.In this case supplier will login into SNC ( hosted at Manufatcuring site ) and manage inventory.
If Manufacturer is managing inventory for CUSTOMER than it is VMI.
Basically SMI and VMI are mirror image of each other.
Hope it will help.
Regadrs
Rahul
Maybe you are looking for
-
Take a look at the OEM quick-charging chargers that really charge quickly
For us phone users it really means getting our Android smartphones back into the game quicker than ever. And once you use it, you'll never want to use anything else. Do you use a Fast Charger and if you do, having any battery or heating problems? A
-
Elements 10 / Folder Mode sorts files in "file name" order; is there a way to do this in Elements 11
-
Tableview problem on firefox browser
Hi, We faced with a problem while using firefox browser on linux client. The problem is browser cannot send selected item index into the BSP application in OnInputProcessing event, but we do not have any problem with IE7, on the same process. We are
-
Yosemite Server 4 Messages Group Auto Buddy Not Working
I know I have had issues with the group auto buddy in the past versions of server, and I am setting up a new Yosemite Server 4 from scratch with OD. I have checked the box in a group to make members buddies automatically, and it isn't working. I went
-
Howto: SQL query to obtain latest n rows
Hey everyone, I want to query a subset of a table to return, at most, a certain number of rows. The problem is that 'rowcnt' is not going to be good enough. Here's the situation: I have a table with lots of data (15 days worth). It will accumulate ov