ROS Supplier not visible

Hello Experts,
I am working on ROS and the problem is as follow please help me,
1) We are using SRM Seperate Client(300) and ROS and SUS in Differnt Client(330).
2) I have configured the system using Config Guide.
But when am "Accepting" The Supplier using "ROS_PRESCREEN" it's not transfering suppliers to SRM.
Please help me in this regard.
Thank you,
Anil

Hi Masa,
1) Thanks for reply, I have configured Supplier directory, But when am trying to connect to "Supplier directory" from SRM client,am getting an error message "Page Not found"?
2) After that I have changed the ROS Client to the same SRM client for time being and I registered some suppliers in the same SRM client using ROS and changed all the settings to the same SRM client. but am not able to see the new ROS supplier list.
and Using the roles page am ale to see the suppliers and I accepted some supplier but am not able to see them in SRM vendor list.
Please help me
Regards,
Anil

Similar Messages

Supplier not visible in the Purchase Order Menu

Hi All,
I have created a Supplier and a Supplier Site from the back end using Supplier Conversion.
It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not visible in the Purchase Order Menu in Purchasing.
I have Enabled the following flags in the Supplier Site Level,
               l_vendor_site_rec.purchasing_site_flag := 'Y';
               l_vendor_site_rec.pay_site_flag := 'Y';
               l_vendor_site_rec.rfq_only_site_flag := 'Y';
What else do I need to enable in Supplier level for the Supplier to be visible for Purchasing.
Please give me a solution so that I can resolve my issue.
Thanks in advance.
Regards,
Bhaskar.

Hi,
You will have to achieve this through APIs, Please do some google and refer Oracle docs.
Following are some links, which may interest you:
R12 Oracle Apps: Supplier or Vendor Creation API
Oracle EBS Technical Step By Step: August 2012
Hope this helps!
Best Regards

Insurance Company Supplier Not Visible in Fixed Assets

Hi,
We setup a supplier as a "Insurance Company" supplier in Oracle AP, but the supplier is not visible in the Fixed Assets Policy drop-down list. Does anyone know if there is an additional step that has to be performed first?
Thanks!

Hi there, this forum is for Oracle Insurance products - not Oracle AP. Try this forum Financials instead.

ROS supplier not transferring in EBP

Dear SRM Experts,
We are working in SRM5.0 with support pack SAPKIBK008.
I have configured ROS and EBP on different client & have maintained following settng:
1. Activated all ROS services in both client.
2. Service user created in ROS with AP_EC_BBP_CREATEUSER & SAP_EC_BBP_CREATEVENDOR roles.
3. This users was maintained in service ROS_SELF_REG at EBP client with user id and pwd.
4. Then Web service is maintained in EBP client with type of vendor list.Defined integrated call structure as:
http://srmdev1.ispatind.com:8000/sap/bc/bsp/sap/ros_prescreen/main.do     0 URL
20     sap-client     130     2 Fixed Value
30     sap-username     SRD130RFC     2 Fixed Value
40     sap-password     init123     2 Fixed Value
50     HOOK_URL                 4 Return URL
60     ~OkCode     ADDI     2 Fixed Value
70     ~target     _top     2 Fixed Value
80     ~caller     CTLG     2 Fixed Value
Here user is my RFC user from EBP to ROS client.
5. Have maintained the table BBP_MARKETP_INFO in EBP only.
6. User has been maintained in org structure for CAT attribute.
7. Have maintained table BBP_MARKETP_INFO in EBP only.
8. maintained in org structure also for user as CAT attribute.
9. Defined the backend system in EBP only in table BBP_BACKEND_DEST.
10. Maintained the ROS client in role SAP_BBP_STAL_STRAT_PURCHASER under PFCG.
11. Vendor is also registering succesfully and & we are able to recieve response in questionnnaire.
I am able to find supplier directory in SCREEN SUPPLIER tab. The problem I am facing are as:
1. Some times I find vendor list of ROS in supplier directory with ACCEPT/REJECT tabs and some time list of accepted vendors with Transfer tab. I don't know why system is behaving like this.
2. I am unable to transfer ROS suppliers from ROS client to EBP client. i.e. TRANSFER tab is not working.
3. Under MANAGE BUSINESS PARTNER tab I have drop dwn in BUSINESS PARTNER FROM LIST but could not get list of vendors after selecting CHOOSE tab.
4.In Bid Invitation and Live auction I have Bidder directory drop dwn,through which when I try to start it, pop up page opens and result in same screen. I dont get list of vendors.
Kindly suggest me how can I resolve these issues. I am waiting for your replies and suggestion eagerly for this.
Regards
Dinesh Singh

hi,
See the foll threads:
<b>Re: Not able to transfer suppliers from ROS to EBP</b>
problems with ROS_PRESCREEN application for screen suppliers and manage bp
Re: SUPPLIER DIRECTORY (ROS) link not appearing in EBP in "SCREEN SUPPLIERS"
Supplier Directory
Re: Supplier Self registration
Re: SRM Supplier registration config
Re: External Web Service setting for Supplier Registration ROS to EBP
Also see the foll note :
Note 916702 - ROS: Using the supplier directory to create a supplier
BR,
Disha.
Pls reward points for useful answers.

Insurance Company Supplier not Visible in FA

Hi,
Running R12.1.2 Fixed Assets
I added "INSURANCE COMPANY" in the PO Lookup Type code "VENDOR TYPE".
Then I defined a supplier as Insurance Company in
Suppliers > Update > Organization > Type: "INSURANCE COMPANY"
But I am unable to view this Supplier in Fixed Assets:
Assets > Insurance > Insurance Policy Details > [Insurance Company]
Does anyone know if there is an additional setup or profile option that needs to be set?
Thanks!

Hi there, this forum is for Oracle Insurance products - not Oracle AP. Try this forum Financials instead.

Create supplier button not visible

Hi Gurus
We are running r12 on solaris 5.10. We have one custom responsibility "KGL AP Superuser".
Previously we had a option of “Create Supplier” option under KGL AP Superuser--> supplier --> Entry. Now that option is not visible. But It is there is TEST CLONE. How do I enable or visible this in PRODUCTION.
Regards
Musaddaq

Hi Bob,
Thanks for your response. Could you please let me know where can i find steps or video to create application in windows.
Vjay

TS1292 There are two numbers that are not visible in the middle of the code What can I do?

There are two digits that are not visible in the middle of the itune code. How can I still access this card?

Click here and request assistance, supplying as much of the code as you can.
(74408)

Account generation workflow custom process not visible in lov

Hi guru,
i have created a sample process in "Project Supplier Invoice Account Generation".
but when i upload the work flow in data base by the concurrent program . i dont find the sample process in " account generation window" in GL.
Please help gurus.
Regards
vishal

Hi,
See the foll notes for solution:
Note 541877 - CUF: Customer fields as checkbox
Note 1016297 - Header customer fields are not displayed in bbpsc02
Note 1034079 - Customer fields not visible in shopping wizard
BR,
Disha.
Pls reward points for useful answers.

PO not visible in WEBUI when Multiple Sup. loc linked to one Sup Org BP,SNC

Hi,
We are implementing SAP SNC 7.0 and started small testing's.
When one supplier location(each individually) is assigned to Supplier org BP, PO is visible in WEBUI.
When two supplier location is assigned to one supplier org BP, PO is not visible and message says"Order not found for the selection"
Whereas when i go to SMI details, it shows data for both supplier location in WEBUI.
Their is no visibility of POand demand.
Thanks & Regards,
Siva

Hi Siva,
You have created PO when one supplier location(each individually) is assigned to Supplier org BP.
In Purchase order Supplier field=<Supplier BP Org> so when two supplier location is assigned to one supplier org BP you have removed supplier BP org for which you have created Purchase order and this is the reason why it is not visible.
Eaxmple:
Supplier1:10000
Supplier2:20000
Case 1)when one supplier location(each individually) is assigned to Supplier org BP
say Supplier1:10000 is assigned to supplier Org BP=10000
say Supplier2:20000 is assigned to supplier Org BP=20000
and you have created Purchase order 45000001 for supplier 10000.
Case 2) when two supplier location is assigned to one supplier org BP
say Supplier1:10000 and Supplier2:20000 is assigned to supplier Org BP=20000
or
supplier Org BP=30000 then you won't be able to see purchase order in SNC web UI as when you have created purchase order supplier BP org was 10000 and now it is 30000 or 20000.
Regards,
Nikhil

GTX770 TF 2G OC is not visible in CC

Hi @ll,
I built up a new system with a MSI Z87 G45 Board and a GTX 770 TF 2G/OC. I'm using Windows 8.1 (64bit). Almost everything is working well, even Windows. :-) However, if I'm starting the MSI Command Center the graphic adapter is not visible. So I can see the RAM and the processor and fan but as I mentioned not the GTX 770.
I have installed the newest nvidia driver.
Who knows or is knowing the problem?
THX in advance
Meph

Jennifer,
I would suggest you try this also.,
VIRSAR3_01_MODEL
VIRSAR3_01_METADATA
And I believe you have defined your SLD data supplier in the SLD.
Thanks.
Regards,
Muthu Kumaran KG

Cs5.5 - OSX 10.7 CMYK ICC Profile not visible?

Hi
Hoping someone can help here.
IT department have installed a new Macpro into our prepress/design area using OSX 10.7 Lion with CS5.5 and now we are not able to use/see any of the custom CMYK ICC profile we use for printers - laser or epson wide format inkjet on any of the CS5 apps. Prior to the new mac we had no issues as we were using 10.6.8 and CS4. I have read through many forums and release notes regarding issues with Lion and CS5 but haven't found any reference to Custom ICC Profile issues.
The ICC profile we urgently need is for our Epson 7800 using custom stock for proofing - specifically supplied for our color management to output to Forgra39 standard.
Had a specialist come in and he's baffled as well.
Any help with this would be MOST appreciated.
Thanks Mike

The ICC profiles are not visible to Applications as Output profiles i.e. Printer profiles. We have double checked the paths and they are correct and the profiles are installed. but they do not show up in Indesign, illustrator etc as a printer profile... In fact no cmyk profiles (even those supplied from Adobe i.e fogra39.icc) show up. When we open up colorsync we can see them but when we try any application to output to a cmyk print (laser or inkjet) the cmyk profiles are not visible.
any help much appreciated in advance
cheers Mike

"ROS_PRESCREEN" Suppliers not Visisble

Hi Experts,
I am working on ROS and SRM same Client, and SUS in seperate client,
I Have configured the system According to Config Guide, But am not able to See the ROS Supplier list am able to See the Suppliers in SUS client but I want to see ROS supplier list.
Please help in this regard.
Thank you,
Anil

Normally ROS and SUS are in one client , and SRM(EBP) system will be in one client.
Supplier will register himself in the ROS system , and the buyer will (accept (or) reject) the suppliers , and the accepted suppliers are transfered in to SRM system as operational suppliers.
do you mean to say 'ROS_prescreen' link is not working?

Audio Interface (Presonus) on Intel iMac - Control software not visible

I'm trying to use core audio compatible Presonus Inspire 1394 firewire audio interface on my new Intel iMac. My main problem is the only controls for the interface are onscreen, but software for said control panel doesn't visibly open. The icon for the device oscillates side-to-side in my dock, and trying to move the inspire file from the desktop reveals that "the app is open." However, I can not see the control panel or any other evidence the file is open. With the help of Presonus tech, I've discovered a couple of things:
1. The device syncs with my iMac, as evidenced by its presence in the Audio Midi Setup panel, plus
2. Play back of a song in iTunes goes through the interface's headphone jack just fine.
My install procedure has revealed two things, also:
When I put the software disk in, open the Inspire control panel file, then the control panel is visible. However, when I then plug in the firewire device, I get an eternally revolving beachball and eventually have to force quit (new to mac, but I figure that is my only option at that point.)
However, if I plug in the firewire first, then try to open the control panel file, I get the open-but-not-visibly-so problem I first mentioned (appears in dock, etc.).
Does anyone have any suggestions? Has anyone experienced a newly loaded app appearing in the dock but not visibly open?
I've tried restarting mac, reinstalling sw and device, downloading said software from the Personus web site (vs the disc supplied version), and both repairing and verifying HD permissions. I am at a loss. Presonus said the device is plug-and-play with core audio. a check reveals the device is PowerPC, but they said it should run on intel mac too, based on their assurances from apple personnel and other stuff I didn't understand (it is an OS X issue, not platform...or something).
Thanks for any suggestions.
Intel iMac 17 in Mac OS X (10.4.4) 1 GB RAM

I got the following message yesterday from Presonus:
Hello,
The new Intel Mac's have a proprietary OSX that does not fully support our
products yet.
They will, but I have no ETA.
Check our website from time to time for future posts and available
downloads.
Butch Richard
Interface Technical Support

Roles not visible

Hello SRM Experts,
I am configured SRM 7.0 with Extended Classic Scenario. Also I assigned Operational & Strategic Purchaser roles (Both SRM & Portals). But I am unable to see the Assign Source of supply,Process RFx and Process Contracts links on the roles.
Am I missing something ? Please guide me...
Cheers,
Laasya

Thanks... I solved by adding Strategic Purchasing (ERP/SRM) Roles..... But I have another problem.....
ERP Purchasing Req is not visible on SRM. I got the error message.....
The following error text was processed in the system R01 : Syntax error in program /1BCWDY/8IXXHLHPT8QQEEM1YQGJ==CP .
The error occurred on the application server ALPHA_R01_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
      Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
      Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
      Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
      Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP

SAP standard Menu : few menu paths not visible in Production but dev

Hi All,
We have a problem where in we can see the following menu path visible in standard menu in developement system; while the same menu path ( and few others also ) not visible in production system for same user ( i.e. having similar authorizations )
the path is : SAP Menu --> Accounting --> Financial Supply Chain Management --> Cash and Liquidity Management
Our system is : ECC 6.0
Every user should be able to view SAP standard menu inspite of the fact that he might have authorization to certain transactions only; hence this should not be an authorization issue ( as per my view ).
So can anybody help/ suggest in this regard?
Thanks.
Regards,
Shamish

Hi Alex,
I had that option in front of me ( we actually tried it also with no result ). But before that I would like to know, why this might have happened. Why there is difference between standard menu on both servers?
Regards,
Shamish

ROS Supplier not visible

Similar Messages

Maybe you are looking for