ROS (without SUS) and EBP in same client-Transferred BP status?

Friends,
We are working on SRM 7.
The ROS (without SUS) and EBP are implemented on the same SRM client.
In supplier registration process, when the accepted business partner is transferred from ROS to EBP, a supplier is correctly created in EBP client with the same business partner number, but the status of the transferred business partner is not updated from 'ACCEPTED' to 'RELEASED', hence there is risk that user can transfer the business partner again.
As per OSS note 857386, the status released is set automatically by the system when an accepted supplier has been distributed. Also the status is valid only for DISTRIBUTED suppliers, that is, ONLY for suppliers TRANSFERED through OPI.
I understand, if ROS (without SUS) and EBP are deployed on separate clients in same server then when the accepted business partner is transferred from ROS to EBP, system triggers an XI message to update the ROS business partner status to 'RELEASED'. Is my understanding right?
How do we update the transferred business partner status to RELEASED when ROS and EBP are on same client?
Regards,
Sandeep Parab
Edited by: Sandeep Meghashyam Parab on Apr 9, 2010 11:43 AM

Hi Sandeep,
I too have a requirement to implement ROS without SUS in SRM 7.0 PPS. Can you send the config guide or steps to follow both in the ROS side and in the SRM Side. Your kind help will be rewarded and highly appreciated.
with regards,
Freemind

Similar Messages

MM-SUS and EBP-SUS in the same client

Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
Nilson

Hi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash

Vendor transfer from mm to sus and ebp to sus

Hi,
I have two scenarios.
1. Plan driven procurement
2. mm-sus scenario
For plan driven procurement I have transferred the vendor from r/3 to ebp using bbpgetvd and ebp to sus using xi.
Now vendor can login to sus and do the biding. But in case of mm-sus scenario whether I need to transfer the vendor again using we14? Please suggest how to proceed vendor transfer incase if we have bidding in sus and po display in sus from r/3 not from ebp.
Vendor can be the same for both the scenario.
1. Plan driven procurement - PO will be in EBP
2. mm-sus scenario - po will be there only in R/3
Regards,
Natchiappan.M

Hi,
I dont think vendor replication is needed. Did you try and test the MM-SUS scenario. Is there any error message that you are getting?
Regards
Azad

Can we have ABAP and PI in same client in the same system?

Hi Consultants,
Can inbound and outbound scenarios work, if the ABAP and PI (7.01) is in the same client ?
If yes, then can you please let me know the settings and configurations required.
Thanks in advance.
Regards,
Naushad

Hello
Please elaborate on your requirements. Are you talking about proxy scenarios? Do you mean can the PI Integration Server client act as a proxy Sender/receiver?
If yes, I don't think this is possible.
Regards
Mark

MM-SUS: EBP, SUS and ROS in one single client

Dear experts,
We are currently on:
SRM 7
ECC6 (EhP 4)
Classic Scenario
We are in the process of implementing SUS and ROS in the same client as EBP.
There are a few things which are not clear to me:
- Do I still need to set up a seperate Vendor Group for SUS next to the one used for EBP? Or can I use that one for both puposes?
- Is vendor replication from ECC to SUS (BD14) necessary or is the replication from ECC to EBP (BBPGETVD) enough for this?
- Should I keep the vendors used for EBP seperate from those used for SUS.
- After user registration (ROS) and acceptance do I still need to transfer the vendor to EBP taking into consideration that they are both on the same client?
Thanks for your reply

Hi Djurick,
First of all it is not recommended to have EBP and SUS in the same client.
However coming to your questions
- Do I still need to set up a seperate Vendor Group for SUS next to the one used for EBP? Or can I use that one for both puposes?
You need to setup a separate group for SUS vendors.
- Is vendor replication from ECC to SUS (BD14) necessary or is the replication from ECC to EBP (BBPGETVD) enough for this?
BD14 is mandatory even if you have SUS and EBP on same client
- Should I keep the vendors used for EBP seperate from those used for SUS.
Yes
- After user registration (ROS) and acceptance do I still need to transfer the vendor to EBP taking into consideration that they are both on the same client?
Yes you need to transfer
Regards,
Nikhil

Clarifications on EBP-SUS and MM-SUS Scenario

Hi !
We are planning to implement EBP-SUS and MM-SUS in one Client . Request you to help us on the following issues.
1. While the outbound messages will not have a problem from MM & EBP, how do we route inbound messages to MM & EBP effectively. Should be handle it in XI ?? If ues, what is the best criteria .
2. Since both the config guides for MM-SUS and EBP-SUS scenarios include transactions for transferring Vendor & Comapny Code data, how do we check duplication.For ex : if we transfer a Vendor from R/3 and subsequently try to transfer the same vendor from EBP , is there any inbuilt duplicate check ?
3. In MM-SUS, an ASN created in SUS creates an inbound delivery is created in MM. What would happen in case of EBP-SUS i.e when an ASN is created for an EBP PO ? We are on extended classic scenario ?
4.If you do a confirmation in EBP-SUS, will a GR be generated in both EBP and subsequently in MM.
Request yr help pl.
Regards

Hi
Welcome to world of SRM.
I guess, you must have got enough details in the SRM guides.
Anyways, better to understand the basics first,, before going in detail. I hope this will answer all your queries.
Refer to these links ->
Supplier Enablement
http://help.sap.com/saphelp_srm50/helpdata/en/cd/0e343e47fd6b2ee10000000a114084/frameset.htm
SUS-EBP Scenario
http://help.sap.com/saphelp_srm50/helpdata/en/06/0f343e47fd6b2ee10000000a114084/frameset.htm
SUS-MM Scenario
http://help.sap.com/saphelp_srm50/helpdata/en/39/0f343e47fd6b2ee10000000a114084/frameset.htm
Supplier Self-services
http://help.sap.com/saphelp_srm50/helpdata/en/25/99b13c48740d55e10000000a114084/frameset.htm
Procurement
http://help.sap.com/saphelp_srm50/helpdata/en/8e/e5623c046a9b67e10000000a11402f/frameset.htm
Users in SRM user Management
http://help.sap.com/saphelp_srm50/helpdata/en/cd/6313513813554e941a02a91540c29e/frameset.htm
Please try this SAP OSS notes as well to get System architecture details->
Note 982871 - Consulting services: supplier integration in SRM
963000 - Usage and release of SRM as AddOn to ECC in ERP2005
868192 - Consulting solution: SUS-MM (SUS-MMSRV) service procurement
573383 - EBP and SUS deployment variants
Also do read this ->
Check whether the roles delivered by SAP meet your requirements. If not, you can create new roles and assign transactions to them. We recommend that you copy standard roles and tailor them to your requirements.
All users assigned to a respective role are then allowed to carry out the transactions. If required, you can refine the authorization check on the tab page Authorizations.
Standard SAP Single-roles
SAP_EC_SUS_ADMIN_PURCHASER (for purchasing administrators - SAP Supplier Self-Services)
SAP_EC_SUS_BIDDER (for bidders - SAP Supplier Self-Services)
SAP_EC_SUS_DISPATCHER (for dispatchers - SAP Supplier Self-Services)
SAP_EC_SUS_INVOICER (for invoicers - SAP Supplier Self-Services)
SAP_EC_SUS_ORDER_PROCESSOR (for order processors - SAP Supplier Self-Services)
SAP_EC_SUS_MANAGER (for managers - SAP Supplier Self-Services)
SAP_EC_SUS_SERVICE_AGENT (for service agents - SAP Supplier Self-Services)
If you want to use SAP Supplier Self-Services, proceed as follows:
1. Select one of the following single roles:
SAP_EC_SUS_ADMIN_PURCHASER
SAP_EC_SUS_ADMIN_VENDOR
SAP_EC_SUS_BIDDER
SAP_EC_SUS_DISPATCHER
SAP_EC_SUS_INVOICER
SAP_EC_SUS_MANAGER
SAP_EC_SUS_ORDER_PROCESSOR
SAP_EC_SUS_PRODUCT_MANAGER
SAP_EC_SUS_SAR_PROCESSOR
SAP_EC_SUS_SERVICE_AGENT
SAP_EC_SUS_SERVICE_MANAGER
2. Choose Change Roles.
3. Choose the Personalization tab page.
Note: The personalization applies to all roles, meaning the user can also create his own roles, for example copying the delivered SAP SUS roles. He can tailor these roles to his requirements by changing the SUS-specific attributes (BBP_SUS_ROLE_ATTRIBUTES).
1. Select the entry BBP_SUS_ROLE_ATTRIBUTES (SUS-specific role attributes).
2. Choose Change values.
A dialog box for maintaining SUS-specific roles appears.
3. If required, perform the following steps:
If the role should be displayed in the SUS User Management (UM) and should be able to be assigned to the relevant user by the supplier administrator, set the indicator to display the role in SUS UM.
If the user should be displayed as a service agent for the purchaser, set the Service agent indicator.
If you want to define the user as an SRM administrator, set the SRM administrator indicator. The user is then authorized to change all supplier data.
If want to assign the role SUS administrator automatically to the user during registration, set the SUS administratorindicator.
Sets the relevant indicators if you want users to receive the following notifications: Notification If Purchase Order Not Opened, Notification If Purchase Order Response Is Missing, Notification If ASN Is Missing, Notification If ConfirmationIs Missing, Notification If Invoice Is Missing,
Do let me know.
Regards
- Atul

EBP and SUS in same client

Hi,
If we habve EBP and SUS in same client do we need XI for connecting the two systems.
Thanks,
Manu

sap OPTIONS TO OUR CUSTOMERS
1. EBP and SUS on the same server but different clients
2.EBP and SUS on different server
3 EBP and SUS in one client: not recommended, only for test systems
THANKS
MUTHU

ROS Implementation in SRM7.01 without SUS

Hi ,
We are implementing ROS functionality with two clients one for ROS and another for SRM, we are having SRM7.01 ,
So by activating business function Supplier Collaboration (SRM_SUCO_1), will the functionality automatic transfer supplier to ERP be possible without SUS in ROS process.
Best Regards,
Raju

Hi Nikhil,
Yes, I agree with you Ros and SUS are different process or functionalities, but I read in one of the sap documentation,
in SRM7.01 it is possible to transfer accepted supplier to ERP system, If we have activated the business function SRM, Supplier Collaboration (SRM_SUCO_1), we can use Supplier Preselection in Supplier Self-Services.
But i dont SUS system separately, I have separate SUS/ROS client. Can you help me on this.
Best Regards,
Raju

Is it possible to record and play at same time in swift, is there a option to record without storing the file

I am making a microphone, is it possible to record and play at same time in swift, is there a option to record without storing the file

Its pretty simple with FMS. You just need to do following things:
Publish using FMLE with following settings: (just telling which are needed , rest you configure based on your needs)
Video codec: H.264
Audio Codec: <of your choice>
Server ip: rtmp://<server-uri>/<app-name>
Stream Name: mp4:<stream-name>.f4v
Application : Server-side code
application.onPublish = function(myclient,mystream){
 mystream.record();
application.onUnpublish = function(myclient,mystream){
 mystream.record(false);
Have a client , which subscribes in following live mode:-
ns.play("mp4:<stream-name>.f4v",-1,0,true); // this is subscribing in live mode
In this way even if file is recorded, your clients are subscribing in live mode so all will be in sync.
Now if you want to disallow any clients who will try to subscribe to "recorded" file when live event is going on, you can achieve using auth adaptor. (let me know if you want to enforce such requirement)
But i think above solution solves your primary problem. Also please let me know if there are any issues in getting it work , i have given bare minimum which is required.

Using the same client for both regfree and out-of-proc COM

Hi,
Here is the context:
1. We have the same set of COM objects that can be deployed as in-proc COM servers (dlls) or out-of-proc COM servers (exe). In-proc servers are called through regfree COM.
2. We have test projects that use the in-proc COM servers through regfree COM.
I would like to use the same test client projects for both regfree and out-of-proc COM servers (but not at the same time). For example, I would like to first run the client using regfree COM, then delete the in-proc dll and register the out-of-proc com server,
and then run the client again without having to recompile. But I have not found a way to do this.
Instead, what I have to do is modify the project settings of the test client project, removing the regfree stuff (the manifest dependencies) before I can use the test client project with the out-of-proc server.
Is there a way to do this without recompiling?
FYI, I have tried regfree COM by changing the client project's Project->Properties->Linker->Manifest file->Additional Manifest Dependencies, or by changing the client project's Project->Properties->Manifest Tool->Input and Output->Additional
Manifest Files. Either way works with regfree COM. And either way I have to remove those settings before making it work with out-of-proc COM (and hence recompiling, which is what I am trying to avoid).
Thanks,
Nick

Try Manifest Tool > Input and Output > Embed Manifest = No, and change Linker > Manifest File > Manifest File to drop ".intermediate" in the middle (or just rename the file after the build).
A manifest doesn't have to be embedded into the executable, it could be a standalone file named like ApplicationName.exe.manifest and sitting in the same directory next to the .EXE. Then you can simply delete or rename it back and forth to switch between
registered and reg-free COM.
Igor Tandetnik

SRM supplier user synchronization between SUS and productive client

Dear Sirs, in our SRM environement the contact persons (and relative system users) created by suppliers in the auto-registration procedure, should be synchronized between SUS and productive client.
(in our implementation client 150 and 330) .
This sync mechanism should be valid also for lock-unlock status of the user and reset of the password,
but in both cases it does not works (a locked user, manually unlocked from client 150 via SU01, is again locked in client 330, the same from 330 client).
Could you suggest a solution or some checkpoints ?
Could you provide some links for the configuration of this mechanism ? (we have seen only the SPRO node " Maintain Systems for Synchronization of User Data") ?
I am not shure if XI is implicated or not.
Best regards,
Riccardo Galli

HI
Maintain Systems for Synchronization of User Data
In this IMG activity, you specify the RFC destinations to which user data from SUS User Management is replicated.
In the Logical System field, you should enter the backend destination with which the user data should be synchronized when they are entered in SUS. On the basis of this information, the system determines the relevant RFC destination automatically.
Specify the function modules for creating, changing, or deleting a user in the external system for each logical system:
Function Module for Creating User: Function module that is called to create a user in the external system
Function Module for Changing User: Function module that is called to change the user in the external system
Function Module for Deleting User: Function module that is called to delete the user in the external system
If this data exists, you can set the indicator Use Purchasing BP ID to use the business partner ID from the procurement system instead of the business partner ID from SUS.
What are the settings maintained here ?
external system and roles in external system
br
Muthu

Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on sam

Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on same NT box.
1) I attempted to install 8.1.6 client first in c:\oracle\ora81, then Forms 6 in c:\oracle\forms6. The installer (3.3.1.2.4) errors, saying forms 6 does not support a multi-home installation.
2) Attmpted to install Forms 6 first in c:\orant. Then installed 8.1.6 client in c:\oracle\ora81. After beginning installation (application user) the following Dependency message displays and the installation is canceled: "Installation cannot continue for the follwoing reason(s). [Oracle ODBC Driver is a single Oracle home product. It is already installed in location c:\oracle\ora81. Oracle provider for OLE DB is a single oracle home product. It is already installed in location c:\oracle\ora81. Oracle objects for OLE is a .... Pracle Provider for OLE is a single home ... You can either de-install these products or install the products in the same location as the single home products."
Click ok and the installation cancels.
How do I install these two products on the same box?

We had to upgrade from 7.3.2 to 7.3.4 when we moved over to Forms
6.0.5.0.2 and it's working fine.
We are using Net 8 as well.
Finn Ellebaek Nielsen (ChangeGroup ApS) (guest) wrote:
: I have problems with Forms 6.0.5.0.2 running against an Oracle
: 7.3.4 with Net8. When trying to insert or update records I get
: an FRM-40508: ORACLE error: unable to INSERT record/FRM-40509:
: ORACLE error: unable to UPDATE record. The Help | Display Error
: menu item shows statement = "S3AVWU3wo|$6o|" (garbled
: message), error = "ORA-12663: Services required by client not
: available on the server" (sometimes it's "ORA-01403: no data
: found").
: It works fine against 8.0.5. As far as I'm aware Forms 6 is
: certified against 7.3.4?
: Any clues?
: Thanks for your help.
: Finn
null

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

Wayland wrote:
The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
Don't have it send email.
Answer the security questions.

I have a ipod touch, an i pad and a iphone can i use my same apple id without texts and apps showing up on every device

i have an ipod touch, an ipad and an i phone, can i use the same apple id without texts and apps showing up on every device.

Yes. Go to your iCloud settings on each device and configure what you do and do not want showing up on each device.
Go to Settings>iCloud as well as Settings>iTunes & App Stores

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

ROS (without SUS) and EBP in same client-Transferred BP status?

Similar Messages

Maybe you are looking for