Rosetta and InDesign CS2

Greetings,
I have not updated my Adobe products in several years, something I used to do regularly.
That said, InDesign CS2 using 10.6, on my son's two year-old white MacBook, results in sporadic rendering of type on the page until the page is clicked with the type tool.
Does !0.6.1 fix this problem?
I have not updated CS2 for because I print and bind my own low-volume manual series and the new versions don't do what the old did, for me. Now I am quite happy with Preview and Gimp as a photosop replacement but have not yet found anything quite as nice as CS2, with the Alap imposition plug-in.
Thanks,
Garrett Connelly

Thanks,
I was just hoping some Mac whiz would read this and a bell would ring to tune things up a bit. I've kept my old computer with OS 10.4.11 so I can run the older Photoshop versions and get the older style PDF files - something is nicer about them.
As far as I'm concerned, Alap is good enough reason to switch to Quark, whenever my Mac no longer can do it. CS2 runs far faster on OS 10.5.8 than 10.4.11. Also, for me, the increase in printer speed means I will have a hard choice going to 10.6 because everything works so good on 10.5.8.
People in every country on earth use my little manuals and I can't let them down.

Similar Messages

Illustrator CS2 and InDesign CS2 not starting - here is how it was solved.

This document is merely a compilation of information found at the sources named at the bottom of this document.
Basically running older Adobe CS2 Software on a MacBook Pro 10.6.x Snow Leopard - probably like many of you that either can't afford the upgrade to CS3, CS4 or CS5, or maybe don't see the need to do so. It's running good but it is slow since it is using Rosetta, but it does work - well, used to work.
Illustrator CS2, InDesign CS2, Photoshop CS2, etc. were all running fine after the upgrade to Snow Leopard (under 10.6, 10.6.1 and 10.6.2). Then the update to 10.6.3 was installed. At the same time a bunch of other updates - including the Acrobat 8.2 update - were installed. Not really sure what did it, but all of a sudden Illustrator CS2 stopped responding at the start up screen - no longer started up and InDesign CS2 popped the registration/licensing screen. When trying to enter license info on first key press the application quit entirely.
So maybe the 10.6.3 update was the culprit. Never even thought that it could be the Acrobat 8.2/8.2.1 updates. Then I found this thread here:
http://forums.adobe.com/thread/613287?tstart=0 (good reading)
Which ultimately pointed me the the instructions here:
>start quote from http://kb2.adobe.com/cps/534/cpsid_53468.html
Replace the corresponding files present in the “ /Library/Application Support/Adobe/TypeSpt/Unicode/Mappings/” folder with the one attached to this document.
Download the attached Mac.dmg (http://kb2.adobe.com/cps/534/cpsid_53468/attachments/Mac.dmg) file to a machine where the issue is seen.
Close all Adobe applications
Double Click the Mac.dmg file to mount it.
Copy Mac folder from mounted image. Paste it to /Library/ApplicationSupport/Adobe/TypeSpt/Unicode/Mappings/.
A message appears to confirm to replace the existing 'Mac' folder. Replace the 'Mac' folder.
Launch Illustrator or InDesign CS or CS 2.
The Mac folder attached to this KB document already has the correct permissions set, so it should not be necessary to complete the steps below. However there may be cases where the permissions for the Mac folder get overwritten. In such a case, the original issue can reoccur. To solve this issue, complete the steps below:
Follow Solution 1 and make sure that all Adobe applications are closed.
Right or Control click and select 'Get Info' on the Mac folder in “ /Library/Application Support/Adobe/TypeSpt/Unicode/Mappings/”, which you have copied from the .dmg file attached to this document.
Verify that under 'Sharing and Permissions' all users listed have no write access
If a change is required, click the padlock symbol and provide your Administrator credentials
Select the user which has Write access and change it to 'Read Only'.
Ensure the user 'Everyone' is set to 'No Access.
To check if the issue has been solved, launch Acrobat 8.2 and then Illustrator or InDesign CS or CS 2.
< end quote
Even after following the instructions still "no love" from Illustrator CS2 or InDesign CS2. InDesign did no longer show the registration screen, but it didn't continue launching, and Illustrator progressed further along in the start up sequence but also never finished launching.
Then I found another article on the adobe site. I am just quoting the part performed and which ultimately did the trick.
>start quote from http://kb2.adobe.com/cps/326/326388.html
Steps 1 and 2 are not relevant so no need to do them
3. At the Finder, choose File > Find.
4. TypeAdobeFnt10.lst (Illustrator CS2), select the system drive, and then press Return.
5. Delete all AdobeFnt10.lst files found.
6. Restart the computer.
7. Restart Illustrator. Illustrator creates a new Adobefnt10.lst or AdobeFnt07.lst file.
< end quote
So, this solved the problems at least for the time being. Hope this helps someone else a bit.
Download files:
http://kb2.adobe.com/cps/534/cpsid_53468/attachments/Mac.dmg
Sources:
http://forums.adobe.com/thread/613287?tstart=0
http://kb2.adobe.com/cps/534/cpsid_53468.html
http://kb2.adobe.com/cps/326/326388.html

Illustrator CS2 stopped working for me on Snow Leopard as well. What it all boiled down to was not to update to 12.0.1. Not sure which release of Snow Leopard I was on when I figured that out but I keep up-to-date, am now at 10.6.6 and CS2 still works fine. I keep getting prompted to update to 12.0.1 from time to time but just cancel it.
I'm fairly sure I was at 12.0.1 already when I moved from Leopard to Snow Leopard and it was that, not a Snow Leopard update, that "broke" CS2 12.0.1. If I remember correctly, if you now try to apply the update, it won't go through with it anyway.

Office 2010 Excel and InDesign CS2

For a number of years, I have been placing Excel tables and graphs into InDesign by turning them into PDFs.
I was able to correctly size the tables/graphs by doing a "Copy as Picture" in Excel and directly pasting into InDesign prior to creating the PDF.
We recently updated to Office 2010 and its version of Excel, and now the "Copy as Picture" step no longer accurately represents the sizing of the PDF.
Any suggestions?
Thanks.

I'm having some trouble getting my arms around the fact that you'd spend money on MS Office upgrade but you're still sitting there with CS2.
Tables in Excel can be placed directly into ID using the file place command. The graphs will need a different route and PDF is as good as any if you don't need to make changes. If you want better results, copy/paste them to Illustrator, save as AI and place that.
I don't think CS2 can handle the XLSX format. You'll need to save back to XLS. Another issue with sticking with CS2 is that it's unsupported under newer operating systems and can be even more troublesome on 64 bit system.
You might want to consider an upgrade to CS5. CS2 is the earliest version eligible for upgrade pricing and if you wait too long you'll be looking at paying full price. If you're running the suite, make sure you look at the right package. There are several upgrade choices. http://amzn.to/alf9eu is the Design Premium upgrade.
Bob

Splitting and InDesign CS2 file.

Going back a little old school here with the CS2. I have a file that is 100 pages and I am looking to split it into 5 different files of 20 pages apiece. I was wondering if anyone knew if that was possible.

Not sure I understand your question as it's very easy to do. Just do a 'save as', delete the unwanted pages from the pages pallette (shift select to do a whole lot at a time), go bact to the original document and repeat.

Photoshop/Indesign cs2 install issues

Ok I just got my first Mac. The PC is six years old and slowly falling apart so I said why not spice it up a bit and get a Mac. Anyways...
I downloaded the trials of photoshop and indesign cs2 from Adobe. The installer starts and then starts to install, but it just quits after about ten seconds and says "please try installing again" both the photoshop and indesign (and i assume every other adobe install application) do this.
I read about the Version Cue issues, but that is not installed and that isn't an option in a custom install anyway.
This is kind of the reason I got the thing. Is a universal version coming out anytime soon?
Macbook pro Mac OS X (10.4.8)

A new UB version of Photoshop is expected @ spring 2007, since Photoshop is part of the Creative Suite, as is InDesign, I'd imagine Adobe will launch a UB Creative Suite around the same time, but when exactly in 2007, only Adobe can say.
Photoshop CS & CS2 installed without issue on my MBP, have to admit, I bought them on disc and didn't try the trial version - Problem could be the Adobe installer won't work properly under Rosetta on an IntelMac

Suddenly getting "Missing Plug-Ins" errors when opening .indd files in InDesign CS2

I have a PC running Windows 7 and InDesign CS2. The laptop's installation of Windows was corrupted and I had to re-install the OS. I backed up all files, reinstalled the OS, and then reinstalled applications. One of those applications was InDesign CS2. However, after the installation of CS2 on the fresh copy of Windows, I noticed that I have trouble opening most, but not all, of the InDesign files on my hard drive.
When I try to open a .indd file I see an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. Under that list of missing plugins is the warning "This document uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?" If I click "okay" I then am met with another dialog box that says "Cannot open file. TEXT.RPLN, LAYER.RPLN" and on and on for about 60 more items.
I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility. Never have I used a newer version of InDesign. The files that I am working on were backed up, stored on local storage and not touched once before reinstalling the OS and reinstalling InDesign CS2.
I also noticed that not all InDesign file formats were associated with InDesign in "Windows Programs and Defaults." I changed those to look to InDesign. I've also uninstalled InDesign CS2 and re-installed.
Not all InDesign CS2 files are exhibiting this behavior. So far, it appears more than half are, but some can be opened with no problems. There seems to be no correlation between which ones are able to be opened and which ones can't be opened.
What could have happened to these files and is there any possibility of opened them again? Any guidance is greatly appreciated.

[Jongware] wrote:
Nonapeptide wrote:
... an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. ...
I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility.
Conditional Text was a new feature in CS4. I'm thinking, can you explain how your old CS2 documents became aware of it?
Not exactly sure myself. Abiogenesis?
[Edit]
Almost forgot. I wrote a script to unequivocally determine the InDesign version a document was last saved as:
http://forums.adobe.com/message/4071273
I'll give that a try today. Even an affirmative judgement that the files are newer than CS2 would not impress me however. The fact remains, the files were copied off one hard drive over to another, the plug was pulled on the hard drive, the PC was re-imaged, CS2 was reinstalled, the files were copied back over... and whammo.

InDesign CS2 Printing Problems

I teach in a Mac computer Lab (mac OS X) and InDesign CS2 is a huge headache for me; my students can't print their work half the time. I read online a lot of member posts about InDesign CS2 printing problems. Would a CS3 upgrade help?

CS3 upgrades are no longer available now that CS4 is out!
Perhaps if you described your particular problems, members of this forum could assist you. Note however, that CS2 was not supported on MacOS X 10.5 (Leopard).
- Dov

Slow Using Photoshop and InDesign

We have several 2GHz C2D Mac minis with 2GB RAM running Leopard. The users are complaining that using Photoshop CS4 and InDesign CS2 is slow. Is this to be expected? Would it be better to upgrade the PowerMac G5's we also have to Leopard, and use the software on that instead? Thanks.

Photoshop and InDesign both need a lot of room in RAM to run at a decent speed. Between just what the OS and Photoshop need, 2 GB of RAM isn't enough. You're getting a lot of page outs to disk in order to run these apps. Even worse if you have both PS and InDesign running at the same time. You really need at least 4 GB of RAM to see good performance.
So yes, since the Mac Minis can't have more than 3 GB of RAM installed, you'd be much happier with the performance of these apps on the G5s. But you'll still have to have more than 2 GB of RAM installed, or you essentially won't see any difference. You would want to have at least 4 GB of RAM installed on the G5s.

NO PUEDO EJECUTAR INDESIGN CS2

HE INSTALADO INDESIGN CS2 PERO ME ENCUENTRO EN LA DESAGRADABLE SITUACIÓN DE QUE NO ME ARRANCA. HAGO DOBLE CLIC EN EL ICONO Y NO PASA NADA. LO HE ISNTALADO VARIAS VECES Y SIEMPRE PASA IGUAL. ¿QUÉ PUEDE OCURRIR? GRACIAS

BTW, I tried to print the file on my husband's Intel Mac Book running 10.4.8 and InDesign CS2. His Mac connects to the printer via Airport.
Nope. So it can't be the operating system. I don't think.

Leopard, InDesign CS2, and Xerox Phaser 6120 Broken

I just updated to Leopard andexcept for a few minor burps, most everything is working except printing from InDesign CS2. When I try to print to my Xerox Phaser 6120, in the printer queue window I get the error:
/usr/libexec/cups/filter/pictwpstops failed
If I look in the CUPS logs, I see this:
\[29/Nov/2007:23:57:35 -0500] [Job 39] Adding start banner page "none".
\[29/Nov/2007:23:57:35 -0500] [Job 39] Adding job file of type application/pictwps.
\[29/Nov/2007:23:57:35 -0500] [Job 39] Adding end banner page "none".
\[29/Nov/2007:23:57:35 -0500] [Job 39] Queued on "Phaser6120_94_D4_50" by "tom".
\[29/Nov/2007:23:57:35 -0500] [Job 39] Started filter /usr/libexec/cups/filter/pictwpstops (PID 598)
\[29/Nov/2007:23:57:35 -0500] [Job 39] Started filter /Library/Printers/Xerox/Filters/xc6120pstops (PID 599)
\[29/Nov/2007:23:57:35 -0500] [Job 39] Started backend /usr/libexec/cups/backend/mdns (PID 601)
E \[29/Nov/2007:23:57:38 -0500] [Job 39] can't create PictWPSDoc from `/private/var/spool/cups/d00039-001'.ERROR during execution of pictwpstops. Error number -9783
E \[29/Nov/2007:23:57:38 -0500] PID 599 (/Library/Printers/Xerox/Filters/xc6120pstops) crashed on signal 10!
I \[29/Nov/2007:23:57:38 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E \[29/Nov/2007:23:57:38 -0500] PID 598 (/usr/libexec/cups/filter/pictwpstops) stopped with status 1!
I \[29/Nov/2007:23:57:38 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
It looks to me like xc6120pstops is crashing and dumping core. Or maybe the issue is with pictwpstops . If I switch over to the "Generic" PostScript printer everything works just fine (but I loose duplexing). And no problems printing from other applications, at least yet.
Has anyone else seen a similar problem?

I seem to be having the same problem with my Xerox Phaser 6120 although it is not application specific. xc6120pstops crashes even if I just print a test page. Generic postscript printer works fine. I've managed to set the printer default to use the duplexer via the web interface, but I'd still rather have full access to the driver.
The Crashreporter log (which oddly reports that xc6120pstops is PPC even though it should be Intel) indeed shows a crash, but I don't know how to interpret any of the detailed information:
Process: xc6120pstops [6211]
Path: /Library/Printers/Xerox/Filters/xc6120pstops
Identifier: xc6120pstops
Version: ??? (???)
Code Type: PPC (Translated)
Parent Process: cupsd [6156]
Date/Time: 2008-03-05 22:59:12.691 -0800
OS Version: Mac OS X 10.5.2 (9C31)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x812a5bc1 0 + 2167036865
Thread 1:
0 ??? 0x800bb9e6 0 + 2148252134
1 ??? 0x800c31dc 0 + 2148282844
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202802
3 ??? 0x800ecc55 0 + 2148453461
4 ??? 0x800ecb12 0 + 2148453138
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb813d020 ecx: 0x00000000 edx: 0xffffffff
edi: 0xb81d8794 esi: 0xb81d8770 ebp: 0x8080d180 esp: 0xb7fffacc
ss: 0x0000001f efl: 0x00010246 eip: 0x812a5bc1 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
Rosetta Version: 21.01
Args: Hermione 44 AK testprint.ps 1 APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1b35ef40-ebf4-379b-7024-3c89d9a29659
Exception: EXCBADACCESS (0x0001)
Thread 0: Crashed (0xb7fffacc, 0x812a5bc1)
0x00003088: /Library/Printers/Xerox/Filters/xc6120pstops : _main + 2172
0x000022fc: /Library/Printers/Xerox/Filters/xc6120pstops : __start + 392
0x8fc01048: /usr/lib/dyld : _dyldstart + 60
0x00000000: /Library/Printers/Xerox/Filters/xc6120pstops : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x00003088 ctr: 0x900210c0
r00: 0x00003088 r01: 0xbfffc900 r02: 0x0000000e r03: 0x00000000
r04: 0x00003ee4 r05: 0xa0022d34 r06: 0xbfffc920 r07: 0x00000012
r08: 0x00000008 r09: 0x00000000 r10: 0x90061160 r11: 0x8fc33c48
r12: 0x900210c0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0xbffff010 r27: 0x0000001c
r28: 0x00000006 r29: 0xbffff014 r30: 0xbfffc900 r31: 0x00002834

InDesign CS2 won't open: error msg states "Please install the MetaData plug-in and restart"

I'm unable to open my InDesign CS2 program, and am wondering if anyone has any suggestions for me. When I try to open it, I get an error message stating: "Cannot load Adobe InDesign CS2 because it requires MetaData. Please install the MetaData plug-in and restart Adobe InDesign."
It worked just fine last week - I have no idea what happened this week... (other than my 3-yr-old 'playing' with my computer...) I am able to open other CS2 programs like Illustrator and Photoshop. Any ideas for me??

Try trashing your preferences: Hold down Shift + Control + Option + Command immediately after launch. You'll get a dialog asking if you want to delete your preferences. If no dialog comes up you didn't do it fast enough.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

Can I export solid objects into Illustrator / InDesign CS2 and maintain vector format

Can Adobe 3D export solid objects in vector format into Illustrator or InDesign CS2 suite?
I'm interested in taking solid 3D objects developed in Pro/E 2.0 and import from Adobe 3D into Adobe Illustrator & InDesign in vector format for page layout. I want to import solid objects in vector format and maintain color scheme and surface textures.
I'm running 3D trial version and can successfully import 3D objects (asm & prt files) solid views from Pro/E but can only export wireframe views from Adobe 3D Toolkit into Illustrator or InDesign (CS2). Solid objects first have to get rendered in a raster format before importing into Illustrator.
If this function is not supported does anyone have experience doing this using Quadraspace or Right Hemisphere 3D software?

Any help???? After 2 weeks I still can't learn from Adobe or Right Hemisphere people how to import solid objects in vector format into Illustrator with color and surface textures in place. All imported objects in vector format are converted to a wireframe or line format unless they are first rasterized.

Best way to upgrade illustrator and photoshop cs2 and purchase indesign

Need to upgrade my os and software. I'm running illustrator and photoshop cs2 and want to purchase indesign. what is the best way to do this?

Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

Copy and paste from InDesign CS2 to Illustrator CS3

Hi,
I'm a Mac Illustrator CS3 user and having trouble copying text from InDesign CS2 to Illustrator CS3.
After copy text from InDesign (allowed), I'll go to Illustrator to paste it, but none of the text appear. I'm not sure if there any other step should I take before paste?
Any help are much appreciated.
Tq

I can't find Clipboard Preferences in either InDesign or Illustrator. Help me.
I'm using Mac Illustrator CS3.
TQ

Rosetta and InDesign CS2

Similar Messages

Maybe you are looking for