RosettaNet and its Compatability with C-folders

Can I please get some info about RosettaNet and Its compatability with C-folders....
its urgent
regards
jay

I would imagine since SEEBURGER is involved in integration solutions
<i>For 20 years, SEEBURGER has been the expert in SAP business integration. More than 1,200 SAP customers both large and small – utilize our B2B/EDI solutions and expertise to connect with their applications and trading partners.</i>
http://www.seeburger.com/index.php?id=sap&no_cache=1&sword_list[]=SAP
Unfortunately I have no way of testing but perhaps someone will see the new activity in the thread and pop in.

Similar Messages

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • I want to transmit a square pulse through USB port, is it possible?? if not then what is the best way to do that, preferable is with serial then parallel, and its compatibility with vista,XP,and @))7 windows

    hi froends
    i want to transmit a square pulse using lab-view, please help how to do that, the preference  will be USB,SERIAL, Parallel ports, it it must be compatible with all the os versions, like 2007 windows, vista,XP and other.
    please help..................

    sanghi wrote:
    OK I WANT TO DRIVE A RELAY.
    SUGGEST SOMETHING 
    Calm down!
    People can't read your mind.  If you want help, repsect those who contribute their time for free to try to help you.
    Put yourself in our shoes.  If I tell you I want to build a rocket, what information would you give me?  You would need to know if it's for a hobby, something bigger, carries a payload, carries living organism, how far does it go, where does it land (if at all), etc...  
    First of all, we still don't know what you want to do with this relay.  Using a computer to generate is series of pulses is not usually the best way.  What is the frequency of the pulses that you want to transmit?  And why do you want to use a relay?  What are you driving?  Can the relay that you are using fast enough to follow the pulse train that you'll be sending?
    Provide information, ask questions politely and people will help you.

  • SOA Suite 11g and its compatibility with Weblogic

    Hi ,
    I have two questions:
    1. From where do I download the SOA Suite 11g --Link to the download?
    2.If SOA suite 11g can be installed on weblogic. I understand that SOA suite 10.1.3.4 is compatible with weblogic 9.2 but need some inputs on the SOA Suite11g!
    Cheers
    Prabal

    Prabal,
    Did you get an answer or we have to wait for the official release till July-1-2009.
    Thanks,
    Rahul

  • Brief discussion on SAP XI and its' Integration with SAP MDM.

    Hi,
    I have never worked on SAP XI.
    I am discussing it on brief, please give your valuable replies.
    SAP XI consists of System Landascape Directory(SLD).
    SLD Consists of Business System and Techinical System.
    Technical System contains all information about the software
    component. The Business System consists of Inbound and Outbound Business
    System which are used as logical names for data transfer.
    There is communication Channel for Receiver and Sender Business System and n agreement
    is signed between Sender and Receiver.
    Outbound Interface defined for Business System Outbound and Techical System associated
    with the Business System,
    Inbound Interface defined for Business System Inbound and Techical System associated
    with the Business System.
    In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
    Actions, Interface Objects, Mapping Objects, Adapters Objects.
    Mapping Object defines the Structure and Value Mapping.
    Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
    FTP Adapter is used for XI-MDM Communication.
    RFC Adapter is used for XI-ECC Communication.
    Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
    Structure Mapping inside Integration Repository.
    The File Adapter takes the File from the Outbound port of MDM System
    and sends it as IDOC to Receiver Business System.
    Value Mapping must be done between Sender and Receiver interfaces.
    Value Mapping is done by XSLT or Java based program.
    SAP NetWeaver XI Integration Server at runtime:
    Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
    and Call Adapter Proccess are done.
    In SAP XI 3.0 and MDM 5.5:
    Step 1: Create busines system as service.
    Step 2: Create communication channel for each business service. If the system can communicate
    through different channels, then create all possible channel types if necessary.
    Step 3: Create receiver agreement between the systems.
    Step 4: Interface determination:
    - Here you see for the first time the software component mentioned;
    there are some special requirements regarding this software component in relation to the customizing ID mapping.
    - To modify this software component, the customer needs to copy the SAP standard delivered software component
    into its own namespace. The customer is able to modify to create archives
    for the customized ID mapping.
    Receiver determination.
    Configure an FTP Server on the MDS.
    Create a send folder for outbound messages using outbound port(s) for
    remote systems(s).
    Create receive folder inbound messages using inbound port(s) for remote systems.
    This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
    Regards
    Kaushik Banerjee

    Hi Kaushik,
    You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
    1. MDMGX -
             - For lookup table extraction
             - Output in XML format which MDM can import without using XI.
              - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
    2. MDM_CLNT_EXTR -
              - For Main table records.
              - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
    Just a basic understanding...
    Regards,
    Jitesh Talreja

  • How do I create a product or item database so I can search fr the product and its files with hte pro

    How do I create a product or item database so I can search for the product and its files with the products name or four digit code

    Ok so I made some progress on this. I have figured out, that I can add a chained "add to cart" to certain items, then when they click the button for Buy now, it will add both items to the cart. However, this would require me to manually build each product page and generate a custom button for each one with both product IDs in it.
    Can anyone offer help on how to put some JS in that would append a second function to the onclick function that BC Generates dynamically?
    For the products that require a set up fee, I would assume I would add in to either the product templates or in to the item description some JS that would find the onclick of the buynow button and append a second function to also add to cart the setup fee product. The end result being code that looks like this:
    <input type="submit" class="productSubmitInput" onclick="AddToCart(188536,6314368,'',4,'','',true);AddToCart(188536,6314367,'',4,'','',tr ue);return false;" value="Buy Now" name="AddToCart_Submit" />
    Except of course, the product ID on the first AddToCart would be the main product with the second one being the one appended.
    Does any of that make sense? lol

  • A730 keyboard and mouse compatibility with other machines

    I would like to have a USB keyboard mouse with the machine.  Unfortunately there is not an option for that with this machine.  I would like to sell the k/m that comes with the machine.
    What machines including ones not made my Lenovo would the k/m be compatible with?
    According to the Lenovo support page for the drivers for this k/m the drivers are compatable with various Lenovo machines.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031648
    Does that mean the k/m are compatable with those machines?
    Is a certain piece of hardware other than the k/b required for it to work?  If so, is that piece of hardware available after market?
    Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,
    Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

    Thank you Assaf for taking the time to install the game to check to see if you got a similar problem
    honestly i'm not sure its my 865PE Neo2 LS or not,it may be a software issue. I'm just guessing because that was a the biggest change in my system before I started to experiance this problem.
    I have experianced this problem with the default windows drivers as well as with logitechs current Mouseware drivers, although i have not tried to install older mouseware drivers
    I've had lockups with CoreCell installed as well as removed.In DirectX 8.1 as well as DirectX 9
    I thought perhaps it might have been my soundcard because prior to buying that I didnt have any problems...so I removed that...but i still got the same problem (although as i type this i realize i didnt uninstall the Audigy software before i tested....hhmmm. I'll have to test that)
    I have noticed it happens more often in OSP/Quake3 (a competition mod) than in plain vanilla Quake3, but it does happen in both.
    One intersting thing i discovered by trying out a Belkin KB with my set up was that when i hit a certain combination of keys it would exec a chat bind i had bound to a whole other key ?!?
    the combination was r + g + spacebar = keypad home
    That particular problem stopped once I went back to original Keyboard. It did stick in my mind however that when playing Q3 i am hitting combinations of keys all the time and that maybe I'm hitting a combination that is problematic for my system. I have not been able to figure out what that combintion is yet (I tried for quite a while ...but was unable to find the correct combination to reproduce the problem )

  • I have buy 4s it's unlocked and its working with different carriers in Bahrain but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this

    I have buy 4s it's unlocked and its working ok with different carriers in Bahrain, but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this?

    Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
    http://support.apple.com/kb/ht1808
    If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
    Regards.

  • My blackberry q10 and its problem with the boradcast

    hii there,
    could you please help me with a problem that i cant solve? , this is why im posting here so i can get the best answer.
    i have almost 2000 bb contacts in my list, and whenever i try to send a BC using "select all " feature, it says the message has been sent but actually it hasnt been sent. i knew this when i asked a couple of friends: have you guys received my bbm broadcast? their answer was no
    also when u usally send any BC, u can find it in any available chat in your chats list so u know its there.
    just so u know, i tried sending a BC to one person and it worked out but when i selected all contacts the second time, it couldnt be sent at all... so please help
    i appreciate your help and immediate support.
    thx,

    hii,,
    well well, this is not my problem only. also a friend of mine is having the same issue. so i guess this is not a network issue, but its a technical one.. broadcasting to 100 people or less than 500 is working.. this is a bbm bug and i would like to report it to blackberry company or the developers of the bbm so if you know how to reach them let me know.. when i used the version 7.1, it was ok all the time. no lagging .. no issues at all. but now... this version pisses me off...
    have to find a solution ASAP

  • Logging to SharePoint and its environment with the setup account - Is this a safe practice ?

    Hello,
    Many of us are very familiar with the suggested accounts: http://technet.microsoft.com/en-us/library/cc263445(v=office.15).aspx#Subsection2  and http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=391
    And we always hear from experts that we should never ever login (Interactive login) to the environment using the FarmAccount e.g. (sp_farm) because this is one of the worst practices and sometimes the the health analyzer will report errors and alerts if
    the farm account is used in interactive logins.
    OK I understand, I get this part, and I will never ever login using the farm account.
    But what about the installation account e.g. (sp_setup)? can I login (interactive login) to the environment and the SharePoint sites using it and doing some changes with it? is that a safe practice? or is it an unforgivable sin too?
    Thanks !

    There's a load of reasons why it's a bad idea.
    Your admins shouldn't be routinely using that account as it has too many things depending on it and so accidental locks could cause issues.
    It's a pain to change it so if a disgruntled admin leaves the company there's a good chance the password won't change, leaving you a potential threat if you've done other silly things.
    You have no audit trails showing who used the account.
    It has too much access for routine use, allowing a malicious or inept admin to do a lot of damage.
    Whilst you might use a keysafe system if it's short enough to remember and type easily then it's not secure enough given its' massive power.
    It leads to assumptions about access that will cause you trouble if you ever try to do things right at a later stage
    etc.
    You should be using individual named AD accounts, ideally separate from normal user accounts and managed through AD groups. These groups should be audited on a regular basis to trim back users to only those who need access. This isn't a SharePoint concept,
    this is a fundamental security process.
    For references may I recommend Computer Security - Principals and Practice by William Stallings and Lawrie Brown (Part 3).

  • Issues with macbook and wireless compatibility with netgear router

    my macbook wireless is extremely spotty with my netgear router at home.
    the connection is sometimes very good, but other times, extremely unreliable.
    the wireless connection to the router is perfect, 4 bars. and it is actually within 10ft of the router itself.
    i use my macbook constantly at my college student center, and the connection to the network and internet is perfect...
    is there any way to fix my internet connection in regards to the netgear router?? (all other PC + PC labtops are perfect with it. its just my macbook that has issues)

    I have to agree with you.
    I have a Netgear Cable Router, my iPhone & my wifes iPhone, my Vista PC & my older Vista Laptop connect with out a problem and are rock solid to boot.
    My new MacBook Aluminium seems to be very tempremental at best. Dont get me wrong, i love my new macbook but i am a little unhappy that this is happening. Looking at others on this forum, it seems to be across the board so will happily await a firmware/driver update from apple.
    With any luck, this should be resolved shortly.

  • NI Motion Controllers and Drives compatibility with stepper motors

    Hello:
    I'm trying to setup a motion control system and I'm facing some trouble. The final goal is to be able to control a couple of stepper motors.We already have a PXI System with a PXI-7354 motion controller, and a UMI-7774 connector block. What we don't have yet is the stepper drives and motors. It's likely that because of torque requirements we may need a gearbox. Here I disclose some of my doubts:
    We are considering the P70360 or the P70530 drives, but I would like to know if it is possible to connect thrid party drives to the motion controllers? What requirements this drives should comply?
    Similar as the first one, Is it possible to connect third party stepper motors to the NI stepper drives? What requirements this motors should comply?
    Finally, Is it possible to adapt gearboxes to the NI stepper motors? If so, Which ones are recommended?
    Thanks in advance,
    Robst.
    Robst - CLD
    Using LabVIEW since version 7.0

       Hello Robst,
    Either the P70360 or the P70530 will be good drives depending on your wattage requirement. A loose rule regarding wattage is not to exceed 80% of capacity. If you think you'll exceed that, buy bigger.
    Regarding third party drives, though many are compatible we cannot guarantee compatiblitty of all drives nor are we able to support them. That being said you may want to take a look at these KBs which describe some issues to be mindful of when looking at third party drives.
    How Do I get the 73xx Controller and UMI-7764 to Drive a Third Party Stepper Motor?
    How to Connect NI 73xx Digital Outputs to Third Party Equipment
    How to connect the 73xx inhibit and command signal outputs to third party drives.
    Some points to glean from the above links are what kind of current gets sinked and sourced by the drives to insure compatibility. Regarding stepper motors, again we will only be able to guarantee compatiblity and provide support for stepper motors provided by NI. That said, the majority of stepper motors I've seen are compatible with our equipment assuming the drive it's connected to is compatible. Below are some articles that may help you make a decision on what type of stepper motor you choose.
    Selecting the Proper Size Stepper Motor
    NI Stepper Motion System Selection Guide
    How Can I Determine My Stepper Motor Wiring Without the Stepper Motor Pinout?
    As for gearboxes, you will just need to make sure that the gearbox you select fits properly with the motor you are using. Often the gearboxes are standardized to NEMA sizes that correspond with the stepper motors. Kollmorgen, who manufactures the motors that we sell, also makes gearboxes. Their gearboxes would be a good place to start.
    Regards,
    Daniel H. 
    Customer Education Product Support Engineer
    National Instruments
    Certified LabVIEW Developer

  • Weird and late syncing with IMAP folders

    Running Leopard 10.5.6 with latest Mail.app.
    Mail.app is configured to use two different IMAP server: one local Dovecot server and a remote IMAP server @GMX. New mail arriving on both IMAP servers are not seen by Mail.app or after some longer period time. Mail.app is configured to check both IMAP accounts each minute for new mail. Even clicking on "Empfangen" (Receive) or using the various options from the dropdown menu 'Postfach' (Folder) does not help. It takes at least one to two minutes after choosing those options in order to get an updated folder listing. This is pretty annoying. Is there any chance for speeding this up?

    I think I have a similar problem. I have an IMAP account. I have some folders not all stored on the server, the bulk of my folders are stored locally (newsletters, Myspace, Ebay). I only keep the work folder stored on the server to check both home and work.
    Since we switched to IMAP, I get Spam in my inbox. I have rules set up on the server, and still Spam slips through. I have an inbox rule, that says if the sender is in my address book, or sender is in my previous recipients send it to the inbox. I also have in the junk mail set up, a rule that says the same, but if the sender is not in my address book, the sender is not in my previous, the message is junk.
    Spam, still slips in my inbox. Also, my newsletter rule does not get followed 100% of the time. I have the sender of the newsletter in the newsletter rule that says this should go to the newsletter folder, but it's coming to the inbox, I believe because it's a previous recipient.
    Any ideas?

  • Not able to get the minimize maximized and close button and its running with full screen mode.

    Hi
    My Thunderbird is running with ubuntu OS and while using some shortcut key my thunderbird mailbox switched to full screen mode. now i am not able to resize it's view and also not able to see minimize, maximize and close buttons on top left corner.
    Please help me out.
    Thanks

    I'm also running Ubuntu. Not sure how you got there, but you can try a Control-Q to quit. Then restart it and hope in comes back normal.

  • What is happening with iCloud and its sync with mobile devices?

    I have been an Apple fan for 4 years now. I currently have 4 Macs (2 @ 27" and 2 @ 21.5" models), 2 iphones (4s and 3gs) and an iPad (2). I use them all for business and personal use.
    Prior to purchasing my iPhone 4s on release day in the UK I was also a fully signed up Mobileme family account user. Everything worked fine. When I purchased my iPhone 4s I switched everything from Mobileme over to iCloud. Followed all the instructions. Initially it seemed to work fine. But over the last few weeks it has all gone horribly wrong resulting in the following; amongst other problems:
    iPhone 4s
    My iphone 4s will no longer sync mail, contacts and calendar effectively. Mail will sync new mail in my inbox but I cant send any mail and when I do draft a mail and send it dissappears from the outbox, sent box and inbox (i always bcc mail). The number of contacts is a fraction of the number of contacts in my contracts file on my main Mac. Calendar will not let me sync or add any new entries...let alone sync with iCal on the Mac.
    iPad 2
    My iPad suffers from much of the same problems as my iPhone. When I go to settings on the iPad and go to Mail, contacts and calendar, the iPad just freezes. I then have to hard re-set to get it working again.
    iPhone 3gs
    I used this before I upgraded to the 4s. It suffers with the same problems as my 4s described above.
    iCloud.com
    The number of contacts on iCloud.com is fixed at 1625no; whereas my Mac has a clean set of contacts containing 1325no. When I try to delete contacts on iCloud.com it says I cant because of a server error. Mail and Calendar both seem to work fine though.
    I am now left with a major business critical problem. Niether iCloud.com, my Mac or my mobile devices will sync with each other. Apple has excalated the problem and my iCloud account is currently being tested. In the meantime my Mac contacts has duplicated and increased upwards of 4,000 contacts.
    This whole journey of bad expereince is driving me insane and making my love of all things Apple wain.
    I have restored my mobile devices about 8-9 times each. I have restored from previous versions stored on iTunes and also set them up as new devices....which as any of you will know is a laborious process because you have to reconfigure the Apps icons each time you do this as a new device! None of my attempts have fixed the situation.
    Are we or have we been used by Apple as guinea pigs to test the iCloud which, according to the communities and discussions on this site, leaves a lot to be desired. This is having a dramatic affect on my quality of life and business.
    Please help me.....
    Mark

    For the most part if you just get a new webhost you can continue to run with iWeb. Since you are still running Tiger iWeb should work just fine for you. You will simply need to publish your website to a folder or with the built in FTP in iWeb. Apple has simply quit updating iWeb & there will come a day when iWeb quits working in the later OS's whatever kitty comes after Lion.
    Here's a link to who I use for Hosting:
    http://jeffnitschke.com/wordpress/?p=84

Maybe you are looking for